OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
32LS5700 32LS5750 42LM6200 42LM6250 42LM6700 47LM7600 42LS5700 42LS5750 47LM6200 47LM6250 47LM6700 55LM7600 47LS5700 47LS5750 55LM6200 55LM6250 55LM6700
55LS5700 55LS5750 65LM6200
P/NO : MFL67468101 (1111-REV00) |
www.lg.com |
ENGLISH
2IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
-TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
IMPORTANT SAFETY INSTRUCTIONS 3
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Never touch this apparatus or antenna during a thunder or lightning storm.
When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
CAUTION concerning the Power Cord (Can differ by country):
It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and
if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
ENGLISH
ENGLISH
4IMPORTANT SAFETY INSTRUCTIONS
Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
Grounding
Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods
are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply
Short-circuit Breaker
DISCONNECTING DEVICE FROM THE MAIN
POWER
The power outlet must remain readily accessed in the event the device needs to be unplugged.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
ANTENNAS Outdoor antenna grounding
(Can differ by country):
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
|
|
Antenna Lead in Wire |
||
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
Antenna Discharge Unit |
||||||||||
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electric Service |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-20) |
Equipment |
|
|
|
|
|
|
|
|
|
|
|
Grounding Conductor |
|||
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-21) |
|
|
|
|
|
|
|
|
|
Power Service Grounding |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electrode System |
NEC: National Electrical Code |
|
|
|
(NEC Art 250, Part H) |
|||||||||||
|
|
|
|
Cleaning
When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.
Moving
Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.
If you smell smoke or other odours coming from the TV, unplug the power cord contact an authorized service center.
Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it.
Keep the product away from direct sunlight.
|
|
|
IMPORTANT SAFETY INSTRUCTIONS 5 |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dot Defect |
|
|
If the TV feels cold to the touch, there may |
||||||||||||||
The Plasma or LCD panel is a high |
|
|
be a small “flicker” when it is turned on. This |
||||||||||||||
technology product with resolution of two |
|
|
is normal, there is nothing wrong with TV. |
||||||||||||||
million to six million pixels. In a very few |
|
|
Some minute dot defects may be visible on |
||||||||||||||
cases, you could see fine dots on the screen |
|
|
the screen, appearing as tiny red, green, or |
||||||||||||||
while you’re viewing the TV. Those dots |
|
|
blue spots. However, they have no adverse |
||||||||||||||
are deactivated pixels and do not affect the |
|
|
effect on the TV’s performance. Avoid |
||||||||||||||
performance and reliability of the TV. |
|
|
touching the LCD screen or holding your |
||||||||||||||
Generated Sound |
|
|
finger(s) against it for long periods of time. |
||||||||||||||
|
|
Doing so may produce some temporary |
|||||||||||||||
“Cracking” noise: A cracking noise that |
|
|
|||||||||||||||
|
|
distortion effects on the screen. |
|||||||||||||||
occurs when watching or turning off the TV |
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
is generated by plastic thermal contraction |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DISPOSAL (Hg lamp only used in LCD TVs) |
|
|
|
||||||||||||
due to temperature and humidity. This noise |
|
|
|
|
|||||||||||||
is common for products where thermal |
The fluorescent lamp used in this product contains |
||||||||||||||||
deformation is required. |
a small amount of mercury. Do not dispose of this |
||||||||||||||||
Electrical circuit humming/panel buzzing: A |
product with general household waste. Disposal of |
||||||||||||||||
low level noise is generated from a high- |
this product must be carried out in accordance to |
||||||||||||||||
speed switching circuit, which supplies a |
the regulations of your local authority. |
||||||||||||||||
large amount of current to operate a product. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It varies depending on the product. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preventing “Image burn” or “Burn-in” on your TV screen |
|
||||||||||||||
This generated sound does not affect the |
|
|
|
||||||||||||||
performance and reliability of the product. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Take care not to touch the ventilation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
openings. When watching the TV for a long |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
period, the ventilation openings may become |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hot. This does not affect the performance of |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If a fixed image displays on the TV screen for |
|||||||||||||||||
the product or cause defects in the product. |
|||||||||||||||||
|
|
a long period of time, it will be imprinted and |
|||||||||||||||
Viewing 3D Imaging (For 3D TV) |
|
|
|||||||||||||||
|
|
become a permanent disfigurement on the |
|||||||||||||||
- The vision of young children may still be |
|
|
|||||||||||||||
|
|
screen. This is “image burn” or “burn-in” and |
|||||||||||||||
developing. 3D contents should not be |
|
|
not covered by the warranty. |
||||||||||||||
viewed by children under the age of 5. All |
If the aspect ratio of the TV is set to 4:3 for a |
||||||||||||||||
other children’s viewing of 3D content should |
|
|
long period of time, image burn may occur on |
||||||||||||||
be supervised by a responsible adult. |
|
|
the letterboxed area of the screen. |
||||||||||||||
- Some viewers may experience symptoms of |
Avoid displaying a fixed image on the TV screen |
||||||||||||||||
discomfort such as nausea, eye strain, fatigue |
|
|
for a long period of time (2 or more hours for |
||||||||||||||
and dizziness when viewing 3D content. All |
|
|
LCD, 1 or more hours for the Plasma TV) to |
||||||||||||||
viewers should take regular breaks to help |
|
|
prevent image burn. |
||||||||||||||
avoid these symptoms. If you experience any |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
symptoms of discomfort, discontinue viewing |
For USA and Canada |
||||||||||||||||
and take a break until the symptoms go away. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If symptoms continue, consult a doctor. |
|
|
NOTE TO CABLE/TV INSTALLER |
|
|
|
|
||||||||||
- Following the guideline below may lessen the |
This reminder is provided to call the CATV system |
||||||||||||||||
likelihood of experiencing such discomfort: |
|||||||||||||||||
installer’s attention to Article 820-40 of the |
|||||||||||||||||
· Viewing angle: watch 3D contents at the |
|||||||||||||||||
National Electric Code (U.S.A.). The code provides |
|||||||||||||||||
eye level of the center of the TV screen. |
|||||||||||||||||
guidelines for proper grounding and, in particular, |
|||||||||||||||||
· Viewing distance: watch 3D contents from |
|||||||||||||||||
specifies that the cable ground shall be connected |
|||||||||||||||||
the minimum distance of 2 times the |
|||||||||||||||||
to the grounding system of the building, as close |
|||||||||||||||||
diagonal size of the TV screen. |
|||||||||||||||||
to the point of the cable entry as practical. |
|||||||||||||||||
|
O
ENGLISH
I
F
T s t p i s t e
ENGLISH
6TABLE OF CONTENTS
TABLE OF CONTENTS
2 |
IMPORTANT SAFETY INSTRUCTIONS |
|
25 |
REMOTE CONTROL |
6 |
TABLE OF CONTENTS |
25 |
Magic Remote Control Functions |
|
26 |
- Registering Magic Remote Control |
|||
|
|
26 |
- How to use Magic Remote Control |
|
|
|
|||
7 |
INSTALLATION PROCEDURE |
26 |
- Precautions to Take when Using the |
|
|
|
|
|
Magic Remote Control |
7 |
ASSEMBLING AND PREPARING |
|
|
|
27 |
WATCHING TV |
|||
|
|
|
|
|
7Unpacking
9 Optional Extras
10Parts and buttons
11Lifting and moving the TV
12Setting up the TV
12- Attaching the stand
13- Mounting on a table
14- Mounting on a wall
15- Tidying cables
27 Turning the TV on for the first time
27USING THE USER GUIDE
28ENTERTAINMENT
28 Network Connection
28 - Connecting to a wired network
30 - Connecting to a wireless network
16 |
MAKING CONNECTIONS |
31 |
TROUBLESHOOTING |
||
16 |
Connecting to an antenna or cable |
|
|
|
|
|
|
|
|||
17 Connecting to a HD receiver, DVD, or VCR |
|
31 OPEN SOURCE SOFTWARE NOTICE |
|||
|
player |
|
|||
|
|
|
|
||
|
|
|
|
||
17 |
- HDMI Connection |
32 |
SPECIFICATIONS |
||
18 |
- DVI to HDMI Connection |
||||
19 |
- Component Connection |
|
|
|
|
20 |
- Composite Connection |
35 |
MAINTENANCE |
||
21 |
Connecting to a PC |
||||
|
|
|
|||
35 |
Cleaning Your TV |
||||
21 |
- HDMI Connection, DVI to HDMI Connec- |
||||
|
tion or RGB Connection |
35 |
- Screen and frame |
||
23 |
Connecting to an Audio System |
35 |
- Cabinet and stand |
||
23 |
- Digital Optical Audio Connection |
35 |
- Power cord |
24 Connecting to a USB
NOTE
Image shown may differ from your TV.Your TV’s OSD (On Screen Display) may
differ slightly from that shown in this manual.The available menus and options may differ
from the input source or product model that you are using.
New features may be added to this TV in the future.
ASSEMBLING AND PREPARING 7
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
NOTE
The items supplied with your product may vary depending on the model.
Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.
|
B |
B |
|
|
|
A |
|
A |
*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)
CAUTION
ENGLISH
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.In case of some model, the thin film on screen is a part of TV, So don’t take it off.
8ASSEMBLING AND PREPARING
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Owner’s manual |
|
Cable holder |
||
Magic Remote Control, |
|
|
||||||||
Batteries (AA) |
|
|
|
|
|
(See p.15) |
||||
(See p.25) |
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
Screws for assembly |
Screw for fixing |
Ring spacers |
8 EA, M4 x 20 |
(Except 55LM6700) |
4 EA |
(See p.12) |
(See p.13) |
(See p.15) |
ENGLISH
Power Cord |
|
Composite gender cable |
|
Component gender cable |
|
|
(See p.19, 20) |
|
(See p.19) |
|
|
|
|
|
Cinema 3D Glasses |
Polishing cloth |
(Except LS5700, LS5750 |
(Depending on model) |
series) |
Gently wipe the spots on the |
The number of 3D glasses |
cabinet with the polishing |
may differ depending on the |
cloth. |
model or country. |
|
ASSEMBLING AND PREPARING 9
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.
These device only works with compatible LG TV.
AG-F2** |
AN-WF100 |
AN-MR300 |
Cinema 3D Glasses |
Wi-Fi dongle |
Magic Remote Control |
The model name or design |
|
|
may be changed depending |
|
|
on the upgrade of product |
|
|
functions, manufacturer’s |
|
|
circumstances or policies. |
|
|
Compatibility |
LS5700 |
LM6200 |
LM6700 |
LM7600 |
|
LS5750 |
LM6250 |
||||
|
|
|
|||
|
|
|
|
|
|
AG-F2** Cinema 3D Glasses |
|
|
|
|
|
|
|
|
|
|
|
AN-WF100 Wi-Fi Dongle |
|
|
|
|
|
|
|
|
|
|
|
AN-MR300 Magic Remote Control |
|
|
|
|
|
|
|
|
|
|
ENGLISH
ENGLISH
10 ASSEMBLING AND PREPARING
Parts and buttons
Screen
Remote control and intelligent1 sensors
Power indicator
Speakers
OK SETTINGS INPUT Touch buttons2
|
Touch Button |
Description |
|
|
|
v ^ |
Scrolls through the saved channels. |
|
- + |
|
Adjusts the volume level. |
|
|
|
OK |
ٜ |
Selects the highlighted menu option or confirms an input. |
|
||
|
|
|
SETTINGS |
Accesses the main menu, or saves your input and exits the menus. |
|
|
|
|
INPUT |
Changes the input source. |
|
|
|
|
/ I |
Turns the power on or off. |
|
|
|
|
1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
|
ASSEMBLING AND PREPARING 11 |
||||
|
|
|
|
|
|
Lifting and moving the TV |
When transporting a large TV, there should |
||||
|
be at least 2 people. |
||||
|
When transporting the TV by hand, hold the |
||||
When moving or lifting the TV, read the following |
TV as shown in the following illustration. |
||||
to prevent the TV from being scratched or |
|
|
|
|
|
damaged and for safe transportation regardless of |
|
|
|
|
|
|
|
|
|
|
|
its type and size. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAUTION
Avoid touching the screen at all times, as this may result in damage to the screen.
It is recommended to move the TV in the box or packing material that the TV originally came in.
Before moving or lifting the TV, disconnect the power cord and all cables.
When holding the TV, the screen should face away from you to avoid damage.
Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
When transporting the TV, do not expose the TV to jolts or excessive vibration.
When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
ENGLISH
ENGLISH
12 ASSEMBLING AND PREPARING
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
1 |
2 |
4 EA
M4 x 20
Front
Top View
CAUTION
When attaching the stand to the TV set, place the screen facing down on a
cushioned table or flat surface to protect the screen from scratches.
3
4 EA
M4 x 20
NOTE
Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
CAUTION
Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.