Network Quick Setup Guide
*Image shown may differ from your TV.
*Image shown on a PC or mobile phone may vary depending on the OS (Operating System).
Wired Network Connection
Internet connection
Wired router
NETWORK SETTING
1Press the SETTINGS button to access the main menu.
2Select the NETWORK → Network Setting menu.
NETWORK |
Move OK |
Network Setting
Network Status
3 Select the Start Connection.
Network Setting
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Start Connection
Previous
4The device automatically tries to connect to the network.
Network Setting
Network connecting...
Cancel
Previous
5The connected network is displayed. Select the Complete to confirm the network connection.
Network Setting
Wired network is connected.
For detailed settings, select [Set Expert].
Set Expert |
Complete |
Previous
P/NO: MBM63564012 (1210-REV02)
Troubleshooting Network Problems
1Press the SETTINGS button to access the main menu.
2Select the NETWORK → Network Status menu.
NETWORK |
Move OK |
Network Setting
Network Status
Follow the instructions below that correlate to your network status.
Check the TV or the router.
Network Status
TV |
Gateway |
DNS |
Internet |
When an X appears between TV and Gateway.
1 Check the cable connection between the TV and the wired router. 2 Reset the power for both the TV and the router/cable modem.
3 If you use a fixed IP address and choose to set the IP address automatically, an X will appear between TV and Gateway.
4 If you are not using a router, consult your Internet service provider for service.
Check the router or consult your Internet service provider.
Network Status |
When an X appears between Gateway and DNS. |
||||
|
|
|
TV |
1 |
Check the router/cable modem. |
|
|
|
|
- Unplug the router/cable modem, then plug it back in after 5 seconds. |
|
|
|
|
|
|
|
|
|
|
Gateway |
2 |
- Press the Reset button on the router/cable modem. |
|
|
|
|
If you are not using a router, consult your Internet service provider. |
|
|
|
|
DNS |
|
|
|
|
|
Internet |
|
|
|
|
|
|
Network Status
TV
Gateway
DNS
Internet
When an X appears between DNS and Internet.
1 Unplug the router/cable modem, then plug it back in after 5 seconds. 2 Press the Reset button on the router/cable modem.
3 Check that the MAC address of the TV/router is registered with your Internet service provider. (The MAC address displayed on the right pane of the network status window should be registered with your Internet service provider.)
4 Check the router manufacturer’s website to make sure your router has the latest firmware version installed.
Installing & Setting
Install the programme on your PC.
1Go to . Then, select your region.
2Select Support. Then, Search for your model.
3Select Drivers & Software or Software Update. Then, select .
4You can run the programme when installation is complete.
|
DLNA Connection to PC |
|
1 Start Nero Media Home 4 and enable shared folders on your PC. |
a |
» a : Click the Share button. |
|
» b : Click the Add button and select the desired folder. |
|
b |
2 Make sure that the PC network device is selected.
c
d |
|
|
|
» c : Click the Network button and check that the correct PC network |
||||
|
|
|
|
|
|
device is selected. (At least one network device must be |
||
|
|
|
|
|
|
|
selected.) |
|
|
|
|
|
» d : Click the Start Server button. |
||||
|
|
|
|
Please select the device. |
||||
|
|
|
|
|
|
|
Page 1/1 |
|
|
|
|
|
|
|
|
|
|
PICTURE AUDIO |
SETUP |
TIME |
|
|
|
|
USB DISK |
|
|
|
|
|
|||||
|
|
|
f |
|
||||
|
|
|
|
|
|
|
|
LOCK OPTION NETWORK
e
Device Selection
Close
Press OK() to set programme settings.
Customer Support |
Exit |
3You can view and enjoy shared content by using the TV’s MY MEDIA( e ) function.
»f : Select the DLNA Device on the TV’s MY MEDIA to enjoy
content from your PC.
SETTINGS → Customer Support ( a ) → Software Update
|
|
|
|
|
Software Update |
|
|
|
|
|
|
Picture Test |
|
PICTURE |
AUDIO |
SETUP |
TIME |
|
Sound Test |
|
Signal Test |
||||||
|
|
|
|
|||
|
|
|
|
|
Product/Service Info. |
|
LOCK |
OPTION |
NETWORK |
MY MEDIA |
|
Network Test |
|
|
|
|
|
|
User Guide |
|
|
Press OK() to set programme settings. |
|
a |
Close |
||
|
|
|
|
Exit |
|
Uses Software Update to check and obtain the latest version. If not updated, certain functions may not work properly. It is also possible to check manually for available updates.
Software Update |
Set it to On. |
|
When an updated file is detected, the file is downloaded automatically. |
|
When the file download is complete, the software update window appears. |
Check Update Version |
Checks the latest update version installed. When a new update is available, the |
|
download process can be performed manually. |