LG 32LS3000 Owner’s Manual

	User’s Guide Specification
1. Model Description					MG KANG	HJ Shin	JO Kim
					12.04.12	12.04.12	12.04.12
MODEL		26CS410-TB	BRAND	LG	Part No.	MFL67452102
SUFFIX		For Asia	Product Name	26CS41**		(1208-REV04)
2.	Printing Specification

1.Trim Size (Format) : 182mm x 257 mm

2.Printing Colors

•Cover : 1 COLOR (BLACK)

•Inside : 1 COLOR (BLACK) 3. Stock (Paper)

•Cover : Uncoated paper , 60 g/

•Inside : Uncoated paper , 60 g/

4. Printing Method : Off-set

5. Bindery : Saddle stitch

6. Language : English (1)

7. Number of pages : 56pages

“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

NDetails should be followed Eco-SCM management standard[LG(56)-A-2524].

OEspecially, Part should be followed and controlled the following specification.

T(1)Eco-hazardous substances test report should be submitted

Ewhen Part certification test and First Mass Production.

S(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

3. Special Instructions

(1) Origin Notification

* LGEIN : Printed in Indonesia	* LGEWA : Printed in U.K.
* LGESP : Printed in Brazil	* LGEMX : Printed in Mexico
* LGEND : Printed in China	* LGEIL : Printed in India

*LGEMA : Printed in Poland

4.Changes

10
9
8
7
6
5
4	08/16/12	Kang.MG	EKLC800747	Added the detach protection cover and Changed the weigh.
3	06/12/12	Kang.MG	EKLC600678	Added the 32CS412-TD, LS3150-TA, LS3000-TA model.
2	04/12/12	Kang.MG	EKLC400949	Updated the manual for screw.
1	03/23/12	Kang.MG	EKLC301868	Changed the power requirement.
REVNO.	. MM/DD/YY	SIGNATURE	CHANGE NO.	CHANGE CONTENTS

Pagination sheet

P/NO. MFL67452102

Total pages : 56 pages

Front						Back
Cover						Cover
(EN)
P/NO.	2	…	…	53	blank	blank

OWNER’S MANUAL

LCD TV / LED LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

CS41**

LS310*

LS311*

LS315*

LS33**

LS30**

P/NO : MFL67452102 (1208-REV04)	www.lg.com
Printed in Korea

<![if ! IE]>

<![endif]>ENGLISH

2TABLE OF CONTENTS

	TABLE OF CONTENTS			40		CUSTOMIZING TV SETTING
			40			Accessing main menus
			40			Customizing Settings
			40			- SETUP Settings
			41			- PICTURE Settings
	2	TABLE OF CONTENTS	43			- AUDIO Settings
			45			- TIME Settings
	3	LICENSES	45			- OPTION Settings
			46			TELETEXT
	3	OPEN SOURCE SOFTWARE NOTICE
			46			Switch On/Off
			46			Simple Text
	4	SAFETY INSTRUCTIONS	46			- Page selection
			46			- Programming a colour button in LIST
			46			mode
	10	INSTALLATION PROCEDURE				Fastext
			46			- Page selection
	10	ASSEMBLING AND PREPARING	47			Special Teletext Function
			48			MAINTENANCE
	10	Unpacking
			48			Cleaning your TV
	15	Parts and buttons
	16	Lifting and moving the TV	48			- Screen, frame, cabinet and stand
	17	Setting up the TV	48			- Power cord
	21	Mounting on a table	48			TROUBLESHOOTING
	23	Mounting on a wall
	24	Tidying cables
	24	Not using the Desk-Type Stand	50			SPECIFICATIONS
	25	MAKING CONNECTIONS

25Antenna connection

26Adapter connection

26HDMI connection

27Component connection

27Composite connection

28USB connection

28 Audio System connection

28- External Stereo Connection

29REMOTE CONTROL

30WATCHING TV

30Turning the TV on for the first time

30Watching TV

30Managing programmes

30- Automatically setting up programme

31- Manually setting up programme

32- Editing your programme list

32- Selecting a programme on the programme list

32- Using favourite programmes

33Using additional options

33- Adjusting aspect ratio

34- Using the input list

35ENTERTAINMENT

35Connecting USB storage devices

36Browsing files

37Viewing photos

38Listening to music

WARNING

yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

yy If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

yy The note helps you understand and use the product safely. Please read the note carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE 3

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yyDo not place the TV and remote control in the following environments: --A location exposed to direct sunlight

--An area with high humidity such as a bathroom

--Near any heat source such as stoves and other devices that produce heat --Near kitchen counters or humidifiers where they can easily be exposed to steam

or oil

--An area exposed to rain or wind --Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

yyDo not place the product where it might be exposed to dust. This may cause a fire hazard.

yyMains plug is the disconnecting device. The plug must remain readily operable.

yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yyMake sure to connect the power cable to the grounded current. (Except for devices which are not grounded.)

You may be electrocuted or injured.

yyFix the power cable completely.

If the power cable is not fixed completely, a fire can break out.

yyEnsure the power cord does not come into contact with hot objects such as a heater.

This may cause a fire or an electric shock hazard.

yyDo not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.

yyBend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the Product and could give an electric shock.

yyWhen mounting a TV it on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV.

It may cause fire, electric shock.

Desiccant

SAFETY INSTRUCTIONS 5

yyDo not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

yyKeep the packing anti-moisture material or vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyDo not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

yyDispose of used batteries carefully to protect a child from eating them. Please seek DoctorMedical Attention immediately if child consumes batteries.

yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

You may be electrocuted.(Depending on model)

yyDo not put or store inflammable substances near the product. There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

yyDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.

yyDo not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something.

You may be injured or the product can be damaged.

yyNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.

yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6SAFETY INSTRUCTIONS

yyDo not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.

Contact the service center for check, calibration or repair.

yyIf any of the following occur, unplug the product immediately and contact your local service centre.

--The product has been impacted by shock --The product has been damaged --Foreign objects have entered the product

--The product produced smoke or a strange smell This may result in fire or electric shock.

yyIf you don’t intend to use the product for a long time, unplug the power cable from the product.

Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

SAFETY INSTRUCTIONS 7

CAUTION

yyInstall the product where no radio wave occurs.

yyThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

yyDo not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.

Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

yyIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

yyOnly use the attachments / accessories specified by the manufacturer.

yyWhen installing the antenna, consult a qualified service man. This may create a fire hazard or an electric shock hazard.

yyWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.

If you watch TV for a long period of time, this may cause blurred vision.

yyOnly use the specified type of battery.

This could cause damage to the remote control.

yyDo not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

yyMake sure there are no objects between the remote control and its sensor.

yySignal from the remote control may be disturbed by sun light or other strong light. In this case, darken the room.

yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8SAFETY INSTRUCTIONS

yyDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

yyPlease follow the installation instructions below to prevent the product from overheating.

--The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in

a cupboard).

--Do not install the product on a carpet or cushion.

--Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.

yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

yyPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.

yyProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.

yyAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

yyWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

yyWhen unplugging the cable, grab the plug and unplug it.

If the wires inside the power cable are disconnected, this may cause fire.

yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

SAFETY INSTRUCTIONS 9

yyWhen moving or unpacking the product, work in pairs because the product is heavy.

Otherwise, this may result in injury.

yyContact the service center once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yy Image shown may differ from your TV.

yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yy The available menus and options may differ from the input source or product model that you are using.

yy New features may be added to this TV in the future.

yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yy Do not use any unapproved items to ensure the safety and product life span.

yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty. yy Some models have a thin film attached on to the screen and this must not be removed.

NOTE

yy The items supplied with your product may vary depending on the model.

yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

B B

*A <= 10 mm

*B <= 18 mm

A A

ASSEMBLING AND PREPARING 11

Remote control and batteries (AAA)

( See p. 29)

Polishing cloth

(Depending on model) Use this to remove dust from the cabinet.

Screw for assembly

8EA, M4 x 20

(Only 26/32/42CS41**, 32/42LS310*, 32/42LS311*) ( See p. 18)

Screw for assembly

4EA, M4 x 14 4EA, P4 x 16

(Only 32LS33**, 42LS315*) ( See p. 17, 20)

Screw for assembly

2EA, P4 x 16 4EA, M4 x 20 (Only 32LS315*) ( See p. 19)

Power Cord

or	Isolator
	(Depending on model)
	( See p. 13)
	Cable holder
	(Depending on model)
	( See p. 24)
	Protection cover
	(Only 32CS41**, 32LS310*,
	32LS311*)
	( See p. 24)
	Protection cover
	(Only 32LS30**)
	( See p. 24)

Owner’s manual

Screw for assembly

2EA, P4 x 16 (Only 22CS41**, 19/22LS33**)

( See p. 17, 19)

Screw for assembly

2EA, M4 x 14 (Only 26LS33**) ( See p. 17)

Screw for assembly

4EA, P4 x 16 4EA, M4 x 20 (Only 32LS30**) ( See p. 20)

Screw for fixing

(Only 26/32/42CS41**, 32/42LS310*, 32/42LS311* 32LS33**,32/42LS315*, 32LS30**)

( See p. )

Adapter

(Only 19/22/26LS33**) ( See p. 26)

Ferrite core

(Depending on model) ( See p. 13)

Protection cover

(Only 26CS41**) ( See p. 24)

Protection cover

(Only 42CS41**, 42LS310*, 42LS311*) ( See p. 24)

Protection cover

(Only 32LS315*) ( See p. 24)

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

Stand Body / Stand Base

(Only 19/22/26LS33**) ( See p. 17)

Stand Body / Stand Base

(Only 32LS33**) ( See p. 17)

Stand Body / Stand Base

(Only 22CS41**) ( See p. 19)

Stand Body / Stand Base

(Only 26CS41**) ( See p. 18)

Stand Body / Stand Base

(Only 32/42LS310*, 32/42LS311*, 32/42CS41**) ( See p. 18)

Stand Body / Stand Base

(Only 32LS315*) ( See p. 19)

Stand Body / Stand Base

(Only 42LS315*) ( See p. 20)

Stand Body / Stand Base

(Only 32LS30**) ( See p. 20)

ASSEMBLING AND PREPARING 13

NOTE

yy Antenna Isolator Installation Guide

-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.

»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.

-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

-- Before starting, be sure that the TV antenna is connected.

Wall	1. Connect to TV.
ANTENNA/	or

Cable / Antenna

Isolator

2. Connect to Set-Top box.

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

NOTE

yy The items supplied with your product may vary depending on the model.

yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

How to use the ferrite core

A ferrite core is used to reduce electromagnetic waves when the power cord is connected to the power outlet. Put the ferrite core on the power cord as shown in the figure below by splitting it apart. It is better to place the ferrite core as close to the TV and the power plug as possible.

(Gray)

[to a wall plug]

[to the TV]

[Figure]

[Cross Section of

Ferrite Core]

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

CAUTION

yy Power Cord Installation Guide

-- If the power cord provided with TV looks like the below picture, please ensure that it is inserted in the right direction.

TV

Power Cord

Correct

Wrong

ASSEMBLING AND PREPARING 15

Parts and buttons

A type :	22/26/32/42CS41**,	B type :	32/42LS315*, 32LS30**
	19/22/26/32LS33**, 32/42LS310*,
	32/42LS311*

				Remote control
				sensor
Screen			Screen	Power indicator
		Remote control
		sensor
		Power		OK
		indicator
Speakers		Speakers		SETTINGS
	Touch buttons			INPUT
		OK	SETTINGS	INPUT
OK	SETTINGS	INPUT		buttons(Only
				32/42LS315*)
			buttons(Only 32LS30**)

<![if ! IE]>

<![endif]>ENGLISH

Button		Description
A type1	B type
		Scrolls through the saved programmes.
		Adjusts the volume level.
OK		Selects the highlighted menu option or confirms an input.
SETTINGS	S	Accesses the main menu, or saves your input and exits the menus.
INPUT		Changes the input source.
/ I		Turns the power on or off.

1A type buttons are touch sensitive and can be operated through simple touch with your finger.

<![if ! IE]>

<![endif]>ENGLISH

16 ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yy Avoid touching the screen at all times, as this may result in damage to the screen.

yy It is recommended to move the TV in the box or packing material that the TV originally came in.

yy Before moving or lifting the TV, disconnect the power cord and all cables.

yy When holding the TV, the screen should face away from you to avoid damage.

yy When transporting a large TV, there should be at least 2 people.

yy When transporting the TV by hand, hold the TV as shown in the following illustration.

yy When transporting the TV, do not expose the TV to jolts or excessive vibration.

yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.