LG 32LD660HUA Users manual

G

Order Number

: GETEC-C1-11-135

FCC Part 15 subpart B

Test Report Number

: GETEC-E3-11-058 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: LCD TV/Monitor

FCC ID.: BEJ32LD660HUA

OWNER’S MANUAL

LCD TV

Please read this manual carefully before operating
your set and retain it for future reference.

32LG710H
37LG710H
42LG710H

P/NO : SAC34134301 (1106-REV05)

32LD650H
37LD650H
42LD650H
47LD650H
55LD650H

32LD655H
37LD655H
42LD655H

32LD660H
37LD660H
42LD660H

32LD665H
37LD665H
42LD665H

32LV555H
42LV555H
47LV555H
55LV555H

www.lg.com

WARNING / CAUTION

WARNING / CAUTION

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle, is

intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating
and maintenance (servicing) instructions in the
literature accompanying the appliance.

WARNING/CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two condi­tions: (1) This device may not cause (harmful)
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation (of the device).

Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

2

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

1

Clean only with a dry cloth.

2

Do not block any ventilation openings. Install in

3

accordance with the manufacturer’s instructions.

Protect the power cord from being walked on or

6

pinched particularly at plugs, convenience recepta­cles, and the point where they exit from the appara­tus.

Only use attachments/accessories specified by the

7

manufacturer.

Use only with the cart, stand, tripod, bracket, or table

8

specified by the manufacturer, or sold with the appa­ratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from
tip-over.

Unplug this apparatus during lighting storms or

9

when unused for long periods of time.

Do not install near any heat sources such as radia-

4

tors, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarized or

5

grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong, The
wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your out­let, consult an electrician for replacement of the
obsolete outlet.

Refer all servicing to qualified service personnel.

10

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

Never touch this apparatus or antenna during a

11

thunder or lighting storm.

When mounting a TV on the wall, make sure not to

12

install the TV by the hanging power and signal cables
on the back of the TV.

Do not allow an impact shock or any objects to fall

13

into the product, and do not drop onto the screen
with something.

3

CAUTION concerning the Power Cord :

GROUNDING

DISCONNECTING DEVICE FROM MAINS

Dot Defect

Generated Sound

O

wner Ma

nual

14

It is recommend that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the same
AC power outlet as this could result in fire or elec­tric shock.
Do not overload wall outlets. Overloaded wall out­lets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized servicer. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord plugged
in. Do not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug the
TV.

Do not expose to dripping or splashing and do not

17

place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).

18

Ensure that you connect the earth ground wire to
prevent possible electric shock. (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grouned AC outlet) If grounding
methods are not possible, have a qualified electri­cian install a separate circuit breaker.

Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.

Short-circuit

Breaker

19

Mains plug is the disconnecting device. The plug
must remain readily operable.

Power
Supply

20

The Plasma or LCD panel is a high technology
product with resolution of two million to six million
pixels. In a very few cases, you could see fine dots

WARNING - To reduce the risk of fire or electrical

15

shock, do not expose this product to rain, moisture
or other liquids. Do not touch the TV with wet
hands. Do not install this product near flammable

on the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.

objects such as gasoline or candles or expose the
TV to direct air conditioning.

21

“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated
by plastic thermal contraction due to tempera­ture and humidity. This noise is common for prod­ucts where thermal deformation is required.

As long as this unit is connected to the AC wall out-

16

let, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.

Electrical circuit humming/panel buzzing: A low
level noise is generated from a high-speed switch­ing circuit, which supplies a large amount of cur­rent to operate a product. It varies depending
on the product.

This generated sound does not affect the per­formance and reliability of the product.

4

ANTENNAS
Outdoor antenna grounding

Antenna grounding according to the
National Electrical Cod

e, ANSI/NFPA 70

Cleaning

Moving

Ventilation

For LCD TV

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Ground Clamps

Power Service Grounding
Electrode System (NEC
Art 250, Part H)

Ground Clamp

Electric Service

Equipment

22

If an outdoor antenna is installed, follow the precau­tions below. An outdoor antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
come in contact with such power lines or circuits as
death or serious injury can occur.

Be sure the antenna system is grounded so as to pro­vide some protection against voltage surges and
built-up static charges.

Section 810 of the National Electrical Code (NEC) in
the U.S.A. provides information with respect to prop­er grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna dis­charge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes and requirements for the grounding elec­trode.

e

25

Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other mate­rials (e.g.) plastic while plugged in. Do not install in
excessively dusty places.

Take care not to touch the ventilation openings.

26

When watching the TV for a long period, the venti­lation openings may become hot.

If you smell smoke or other odors coming from the

27

TV, unplug the power cord contact and authorized
service center.

Do not press strongly upon the panel with a hand or

28

sharp object such as nail, pencil or pen, or make a
scratch on it.

NEC: National Electrical Code

23

When cleaning, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not
spray water or other liquids directly on the TV as
electric shock may occur. Do not clean with chemi­cals such as alcohol, thinners or benzene.

24

Make sure the product is turned off, unplugged
and all cables have been removed. It may take 2 or
more people to carry larger TVs. Do not press
against or put stress on the front panel of the TV.

Keep the product away from direct sunlight.

29

30

If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.

Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary dis­tortion effects on the screen.

ON DISPOSAL

(Only Hg lamp used LCD TV)

The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out in
accordance to the regulations of your local authority.

5

CONTENTS

WARNING / CAUTION
SAFETY INSTRUCTIONS
FEATURES OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PREPARATION

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel Information
Back Panel Information
Stand Instructions
Cable Management
Desktop Pedestal Installation
Swivel Stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Attaching the TV to a desk
VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Securing the TV to the wall to prevent falling
When the TV is used on a stand
Antenna or Cable Connection
MPI Card Slot / PPV Card Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . 31

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

DVD Setup
VCR Setup
Other A/V Source Setup
Audio Out Connection
PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

WATCHING TV / CHANNEL CONTROL

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Turning On The TV
Channel Selection
Volume Adjustment
On-Screen Menus Selection
Channel Setup

- Auto Scan (Auto Tuning)

- Add / Delete Channel (Manual Tuning)

- Channel Editing
Channel Label

Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Example Electronic Program Guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

. . . . . . . . . . . . . . . . . . . . . . . . . . . 50

. . . . . . 51

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . 54

Photo List
Music List
Extra Contents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

PICTURE CONTROL

PIP (Picture-In-Picture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Picture Size (Aspect Ratio) Control
Preset Picture Settings (Picture Mode)
Manual Picture Adjustment - User Mode
Picture Improvement Technology
Picture Reset
Demo mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

. . . . . . . . . . . . . . . . . . 66

. . . . . . . . . . . . . 69

. . . . . . . . . . 70

. . . . . . . . . . . . . . . . . . . . . 71

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 75

Preset Sound Settings (Sound Mode)
Sound Setting Adjustment - User Mode

- SRS TruSurround XT

- Infinite Sound
Clear Voice ll
Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

TV Speakers On/Off Setup
Audio Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Stereo/SAP Broadcast Setup
Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

. . . . . . . . . . . . . . . . . . . . . . . . . . . 83

On-Screen Menus Language Selection
Caption Mode

- Analog Broadcasting System Captions

- Digital Broadcasting System Captions

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

. . . . . . . . . . . . . . . 76

. . . . . . . . . . . 77

. . . . . . . . . . . . . 85

. . . . . . . 86

. . . . . . . . 87

USB

Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

6

TIME SETTING

Clock Setting

- Auto Clock Setup

- Manual Clock Setup
Auto On/Off Time Setting
Sleep Timer Setting
Auto Shut-Off Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Channel Blocking
Movie & TV Rating
Downloadable Rating
External Input Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4

Maintenance
Product Specifications
Programming the Remote Control
IR Codes
Open Source License

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7

. . . . . . . . . . . . . . . . . . 10 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

7

FEATURES OF THIS TV

■

This feature is not available for all models.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

Unlike other sensors which can only sense brightness
of ambient light, LG’s “Intelligent Sensor” uses 4,096
sensing steps to evaluate its surroundings. Using a
sophisticated algorithm, the LG processes picture
quality elements including brightness, contrast, color,
sharpness and white balance. The result is a picture
optimized for it’s surroundings, more pleasing to
watch and which can also save up to 50% in power
consumption.

View videos and photos and listen to music on your
TV through USB 2.0 (‘videos’ dependent on model).

LG TV include a unique invisible speaker system,
tuned by renowned audio expert, Mr. Mark Levinson.
Speakers are embedded in strategic spots behind the
front cabinet and use minute vibrations to turn the
entire front bezel into the speaker system. The result
is a clean, polished look, and enhanced audio by
increasing the “sweet spot”, giving a wider and richer
sound field.

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

Automatically enhances and amplifies the sound of
human voice frequency range to help keep dialogue
audible when background noise swells.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."

Matches the original frame rate of the film for a more
film-like experience

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN
/ BURN-IN” ON YOUR TV SCREEN

■

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV

for an extended period, it can become permanently imprinted on the screen. This phenomenon is known
as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.

■

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period

(2 or more hours for LCD, 1 or more hours for Plasma).

■

Image burn can also occur on the letterboxed

areas of your TV if you use the 4:3 aspect
ratio setting for an extended period.

8

PREPERATION

Optional Extras

1.5V 1.5V

MUTE

RETURN

CC

TV

POWER

GUIDE

PORTAL

ENTER

VOL

CH

123

456

78

0

9

FLASHBK

VCR

DVD

INPUT

MENU

INFO

i

STB

P
A
G

E

PIP

SAP

PIP CH-

PIP CH+

PIP SWAP

PIP INPU

T

A
LPHA/NU

M

REMOVE

RATIO

TIMER

ABC

DEF

GHI

WX
Y
Z

TUV

PQRS

MNO

JKL

&@

.:/,

For 32/37/42LG710H

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.

The accessories included may differ from the images below.

PREPARATION

Owner’s Manual

x 2

Torx plus

Star head screw

(Refer to P.18, P.19)

* Wipe spots on the exterior only with the pol-

ishing cloth.

Polishing Cloth

(Not included with all

models.)

F

* Do not wipe roughly when removing stains.

Excessive pressure may cause scratches or
discoloration.

CD Manual

Protective Bracket and

Screw for Power Cord

(Refer to P.21, P.22)

Remote Control,

Batteries

D-sub 15 pin Cable

Power Cord

When using the VGA (D-sub 15 pin
cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain
standards compliance.

(For 32LG710H)

x 4 x 4

Screws for stand

assembly

(Refer to P.18)

Cable Holder

(Refer to P.21)

Screw for

stand fixing

(Refer to P.25)

Protection Cover

(Refer to P.18)

Plug-in type Holder

(Refer to P.21)

9

PREPARATION

For 32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H

For 32/42/47/55LV555H

F

PREPARATION

(For 32/37/42LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H)

x 4

Cable Holder

(Refer to P.22)

Screws for stand

fixing

(Refer to P.25)

F

x 4

(M4 x 14)

Screws for stand assembly

(Refer to P.20)

Plug-in type Holder

(Refer to P.22)

x 2

Washers for stand

(Refer to P.25)

x 4

(M4 x 20)

x 2

fixing

Rubbers for stand

fixing

(Refer to P.25)

Nuts for stand

fixing

(Refer to P.25)

Cable Holder

(Refer to P.23)

x 2

x 2

Screw for stand fixing

(Refer to P.25)

Plug-in type Holder

(Refer to P.23)

x 8

(M4 x 20)

Screws for stand assembly

(Refer to P.19)

Protection Cover

(Refer to P.19)

x 4

Rubbers for stand

fixing

(Refer to P.25)

10

x 2

Screws for stand

fixing

(Refer to P.25)

x 2

Washers for stand

fixing

(Refer to P.25)

x 2

x 2

Nuts for stand

fixing

(Refer to P.25)

(For 32/42LV555H)

Screw for stand fixing

(Refer to P.25)

Protection Cover

(Refer to P.20)

PREPARATIONPREPARATION

PREPARATION

32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H

CHANNEL( , )
Buttons

VOLUME (+, -)
Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

SPEAKER

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates blue when the set is

switched on.

Remote Control Sensor

CH

VOL

ENTER

MENU

INPUT

12

Intelligent Sensor

Adjusts picture according to the surrounding condi­tions.

SERVICE

ONLY

OPTICAL

DIGITAL

UPDATE

RESET

LAN

2

1

HDMI/DVI IN

2

1

RJP

INTERFACE

SPEAKER

OUT
8

RGB IN (PC)

AUDIO IN

(RGB/DVI)

TV-LINK CFG

GAME

CONTROL

RS-232C IN

(SERVICE ONLY)

AUDIO OUT

A
V IN 1

AUDIO

VIDEO

MONO

/

COMPONENT

IN

L

R

LAN

PREPARATION

R

R

/

R

ANTENNA IN

M.P.I.

R

ANTENNA INANTENNA IN

M.P.I.M.P.I.

AC IN

R

/

BACK PANEL INFORMATION

■

Image shown may differ from your TV.

PREPARATION

32/37/42LG710H

ANTENNA IN

14

1

HDMI/DVI IN

2

1(DVI)

INTERFACE

RJP

M.P.I.

6

15

VIDEO

3

LAN

(SERVICE ONLY)

RGB IN

COMPONENT IN

4

RESET

RGB(PC)

TV-LINK

CFG

(RGB/DVI)

AUDIO

5

AUDIO

GAME

CONTROL

UPDATE

RS-232C IN

(SERVICE ONLY)

6

AV IN 1

7

OPTICAL

DIGITAL

AUDIO OUT

AUDIO

8

/

MONO

92

SPEAKER OUT

8

REMOTE

CONTROL OUT

VIDEO

16

USB IN

AUDIO

L/ MONO

VIDEO

10

AV IN 2

11

14

13

32/37/42LD660H, 32/37/42LD665H

15

6

17

13

2

1

14

5

12

11

16

USB IN

17

4

8

11

6

9

AUDIO

L/ MONO

VIDEO

7

AV IN 2

12

18

11

1

HDMI/DVI IN

Digital Connection. Supports HD video and Digital
audio.

Accepts DVI video using an adapter or HDMI to DVI
cable (not included)

2

RGB IN (PC)

Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).

AUDIO IN (RGB/DVI)

1/8” headphone jack for analog PC audio input.

LAN (SERVICE ONLY)

3

For connecting to a control network.

4

RESET

Performs a hardware reset.

UPDATE

Enables/disables software downloads and debug mode.

5

TV - LINK CFG

Computer input for programming Free To Guest ser-

vices.

6

GAME CONTROL

Input port for third party game Controllers.

M.P. I.

Allows VOD/PPV devices or set-top boxes to control
the TV.

9

SPEAKER OUT 8

Ω

For use with external speakers.

REMOTE CONTROL OUT

10

IR output for controlling an auxiliary device.

AV (Audio/Video) IN 1/2

11

Analog composite connection. Supports standard
definition video only (480i).

COMPONENT IN

12

Analog Connection. Supports HD.
Uses a red, green, and blue cable for video & a red

and white cable for audio.

13

RJP INTERFACE (REMOTE JACK PACK PORT)

Connect this to an LG remote jack pack system.

ANTENNA IN

14

Connect an antenna to receive over-the-air (OTA)
signals.

15

Power Cord Socket

AC power input.
Caution: Never attempt to operate the TV on DC

power.

16

USB IN

Used for viewing multimedia files.

PREPARATION

7

RS-232C IN (SERVICE ONLY)

Used for software updates.

8

OPTICAL DIGITAL AUDIO OUT

Optical digital audio output for use with amps and
home theater systems.

Note: In standby mode, this port doesn’t work.

LAN

17

For connecting to a control network.

18

SERVICE ONLY

Used for software updates.

17

32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H

STAN D BODY

STAN D B ASE

STAND BODY

STAN D B ASE

G

!

prot e ction cover

PROTECTION COVER

INSTALLATION

Carefully place the TV screen side down on a

1

cushioned surface to protect the screen from
damage.

A
C
I

N

C
A
B
L
E
M

A
N
A
G
E
M

E
N
T

Assemble the parts of the

2

with the

M4 x 20

Assemble the TV as shown.

3

A
C
IN

C

A
B
L
E

M
A
N
A
G
E

M
E
N
T

S

of the TV.

DETACHMENT

Carefully place the TV screen side down on a

1

cushioned surface to protect the screen from
damage.

A
C

I
N

C
A
B
L
E
M
A
N

AGE
M
E

N
T

Remove the screws that hold the stand on.

2

A
C

I
N

C
A
B

L
E
M

A
N
AG

E
M
E
N

T

Detach the stand from TV.

3

A
C

I
N

C
A
BL
E

M
A
N
A
G

E
M
E
N

T

PREPARATION

4

x 4

Tighten the stand with the
four screws (provided as parts
of the TV).

or

x 2

Tighten the two of these four screws

x 2

and the two Torx plus star head screws

(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head dri­ver bit (not provided as parts of the TV).

NOTE

When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
installation). Do not over tighten.

PROTECTION COVER

After removing the stand, install the included
p

Press the
until you hear it click.

over the hole for the stand.

into the TV

19

PREPARATION

P

AC IN

AC IN

AC IN

G

G

!

PREPARATION

32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H

Connect the cables as necessary.

1

To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.

Put the cables inside the CABLE MANAGEMENT

3

CLIP and snap it closed.

To help prevent the power cable from being
removed by accident, secure the power cable
with the included

ROTECTIVE BRACKET

/SCREW. The 32/37/42LD650H,
32/37/42LD655H, 32/37/42LD660H,
32/37/42LD665H use a Plug-in type

Holder instead of using a screw.

NOTE

PROTECTIVE BRACKET/SCREW

Or

PLUG-IN TYPE HOLDER

(For 32/37/42LD650H,

32/37/42LD655H,
32/37/42LD660H,

32/37/42LD665H

model)

Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.

- If the TV is dropped, you may be injured or the
product may be broken.

With some TVs, the PLUG-IN TYPE HOLDER
and the CABLE HOLDER are included. If these
holders are inserted into the hole provided on
back of the TV, they cannot be removed.

22

Open the CABLE MANAGEMENT CLIP as

2

shown.
If a CABLE HOLDER was included with your

TV, install it as shown.

CABLE MANAGEMENT CLIP

CABLE HOLDER

(For 32/37/42LD650H,

32/37/42LD655H,
32/37/42LD660H,

32/37/42LD665H

model)

PREPARATION

G

G

DESKTOP PEDESTAL INSTALLATION

■

Image shown may differ from your TV.

PREPARATION

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

4 inches

4 inches

4 inches

CAUTION

Ensure adequate ventilation by following the clearance recommendations.

G

Do not mount near or above any type of heat source.

4 inches

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction to suit your viewing posi­tion.

20°: 47/55LD650H
90°: Other Models

24

PREPARATION

G

G

G

ATTACHING THE TV TO A DESK

The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product.

32/37/42LG710H

Stand

PREPARATION

4-Screws

(not provided as parts of the product)

Recommended screw size: M5 x L (

ex) Table depth: 15mm, Screw: M5 x 25

*L: Table depth + 8~10mm

)

Desk

32/37/42LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H, 32/42LV555H

Type 1

4-Screws

(not provided as parts of the product)

You can select any type of attachment (Type 1 or Type 2)

G

Do not over tighten.

Type 2

Stand

or

2-Screws, 2-Washers, 2-Nuts, 4-Rubbers

(provided as parts of the product)

Desk

25

PREPARATION

G

47/55LD650H, 47/55LV555H

PREPARATION

Stand

4-Screws

(not provided as parts of the product)

Desk

EXCEPT 47/55LD650H, 47/55LV555H

Stand

1-Screw

(provided as parts of the product)

Desk

WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation

G

instructions. Tipping, shaking, or rocking the TV may cause injury.

26

VESA WALL MOUNTING

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact an installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.

AA

BB

PREPARATION

Model

32 LG 710 H

37LG710H,

42LG 710 H

32LD650H,

32LD655H,
32LD660H,
32LD665H,

32 LV 555H

37LD650H,

37LD655H,
37LD660H,
37LD665H,
42LD650H,

42LD655H,
42LD660H,
42LD665H,

42LV555H,

47LD650H,

47LV555H

VESA (A *B)

AA

BB

Standard Screw Quantity

200* 10 0 M 4 4

200* 200 M6 4

200* 10 0 M 4 4

200* 200 M6 4

Wall Mounting Bracket

(sold separately)

RW230 AW-47LG30M

AW-47LG30M

LSW100B, LSW100BG

LSW200B, LSW200BG

55LD650H,

55 LV 555H

400* 400 M6 4

LSW400B, LSW400BG,

DSW400BG

27

PREPARATION

G

G

G

G

G

G

G

G

!

NOTE

PREPARATION

Screw length needed depends on the wall mount
used. For further information, refer to the instruc­tions included with the mount.

Standard dimensions for wall mount kits are shown
in the table.

When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.

Do not use screws longer then the standard dimen­sion, as they may cause damage to the inside of
the TV.

For wall mounts that do not comply with the VESA
standard screw specifications, the length of the

CAUTION

Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.

screws may differ depending on their specifica­tions.

Do not use screws that do not comply with the
VESA standard screw specifications.

Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.

LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installa­tion instructions.

28

SECURING THE TV TO THE WALL TO PREVENT FALLING

G

G

!

WHEN THE TV IS USED ON A STAND

■

You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).

■

Image shown may differ from your TV.

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,

potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the pic­ture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the

bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

PREPARATION

■

Use a sturdy rope (sold separately) to tie the product. It is safer to
tie the rope so it becomes horizontal between the wall and the prod­uct.

NOTE

Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

G

To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.

29

PREPARATION

R

ANTENNA INANTENNA IN

M.P.I.

R

ANTENNA INANTENNA IN

M.P.I.

PREPARATION

■

To prevent damage, do not connect to the power outlet until all connections are made between the devices.

ANTENNA OR CABLE CONNECTION

PREPARATION

1. Antenna (Analog or Digital)

This image refers to using a Wall Antenna Socket or Outdoor
Antenna without a Cable Box Connection.

Wall
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

- For optimum picture quality, adjust the antenna direction if needed.

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Ω)

Copper Wire

Be careful not to bend the copper wire
when connecting the antenna.

30

2. Cable

This image refers to using a cable connection without a cable box.

Cable TV
Wall Jack

RF Coaxial Wire (75

- If you experience a poor signal when using cable, make sure the RF cable is screwed in completely.
Contact your cable company is a poor signal persists.

Ω)

MPI CARD SLOT / PPV CARD INSTALLATION

ANTENNA IN

M.P.I.

G

The MPI card is equipped with an RF jack for antenna/cable signal source connection.
This card can be removed and replaced with a third-party PPV (Pay-Per-View) card.

(Except 47/55LD650H)

MPI Card Removal / PPV Card Installation

1. Remove the two MPI card retainer screws.

2. Pull out current MPI card far enough so that the RF cable can be detached from the old card.

3. Detach RF cable.

4. Place new PPV card into slot and slide it in far enough to reconnect RF cable.

5. Insert card all the way into the slot making sure it is fully seated into back plane connector.

6. Replace the two card retainer screws.

RF CABLE

PREPARATION

M.P. I.

Card Slot

WARNING

There is an RF cable connected to the back of the card. Remove the card slowly.

31

EXTERNAL EQUIPMENT SETUP

COMP O NENT IN V I DEO

COMP O NENT IN AUDIO

Compo n ent

INPUT

U

RESET

LAN

(SERVICE ONLY)

COMPONENT IN

VIDEO

AUDIO

R

(S

/

VIDEO

AUDIO

COMPONENT IN

RGB(PC)

AUDIO
(RGB/DVI)

RGB IN

TV-LINK

CFG

Y L RPB PR

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

Image shown may differ from your TV.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However,
if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as
shown below.

EXTERNAL EQUIPMENT SETUP

Component Connection

1. How to connect

Connect the video outputs (Y, PB, PR

1

top box to the
the TV. Match the jack colors (Y = green, P
P

Connect the audio output of the digital set-top box to

2

the

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

■

Select
on the remote control.

R = red).

input source using the

)

of the digital set-

jacks on

B = blue, and

jacks on the TV.

)

button

1

2

32

Supported Resolutions

Signal

480i

480p

720p

10 8 0 i

10 8 0 p

Component

Yes

Yes

Yes

Yes

Yes

HDMI

No

Yes

Yes

Yes

Yes

For 37/42/47/55LD650H, 37/42LD655H,

37/42LD660H, 37/42LD665H, 42/47/55LV555H

Y, CB/PB, CR/PR

Resolution

720x480i

Horizontal Vertical

Frequency(kHz)Frequency(Hz

15.73 59.94

15.73 60.00

720x480p

31.47 59.94

31.47 60.00

1280x720p

1920x1080i

1920x1080p

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

67.50 60.00

For 37/42/47/55LD650H, 37/42LD655H,

37/42LD660H, 37/42LD665H, 42/47/55LV555H

)

HDMI Connection

HDMI /DVI IN 1

(DVI)

2

HDMI1

HDMI2

INPUT

HDMI/DVI IN

2

1(DVI)

RJP

INTERFACE

VID

RGB

/

HDMI/DVI IN

2

1(DVI)

HDMI-DTV OUTPUT

G

G

!

1. How to connect

Connect the digital set-top box to

1

No separate audio connection is necessary.

2

or

jack on the TV.

HDMI supports both audio and video.

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

■

Select
button on the remote control.

NOTE

If the HDMI cables don’t support High Speed
HDMI, it can cause flickers or no screen display. In
this case use the latest cables that support High
Speed HDMI.

HDMI mode supports PCM, Dolby Digital audio
format.

or

input source with using the

)

HDMI-DTV

Resolution

720x480p

1

Horizontal Vertical

Frequency(kHz)Frequency(Hz

)

31.47 59.94

31.47 60.00

EXTERNAL EQUIPMENT SETUP

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

1280x720p

1920x1080i

26.97 23.94

1920x1080p

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.939

67.50 60.00

33.75 60.00

33.72 59.94

For 37/42LD660H, 37/42LD665H, 42/47/55LV555H,
42/47/55LV555H

For 37/42/47/55LD650H, 37/42LD655H

33

EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

UPDA

RESET

LAN

(SERVICE ONLY)

RJP

INTERFACE

COMPONENT IN

VIDEO

AUDIO

R

(S

/

HDMI/DVI IN

2

1(DVI)

LR

DVI-DTV OUTPUT

L

R

TV-LINK

CFG

CO

G

!

HDM I /DVI IN 1 (DV I )

AUDI O ( RGB/DVI )

HDMI1

INPU T

DVI to HDMI Connection

1. How to connect

EXTERNAL EQUIPMENT SETUP

Connect the DVI output of the digital set-top box to

1

the

Connect the audio output of the digital set-top box to

2

the

2. How to use

■

Turn on the digital set-top box. (Refer to the owner’s man­ual for the digital set-top box.

■

Select the

NOTE

A DVI to HDMI cable or adapter is required for this
connection. DVI doesn't support audio, so a separate
audio connection is necessary.

jack on the TV.

jack on the TV.

)

input source on the TV using the

button on the remote control.

1

2

34