OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
LN510*
LN511*
LN512*
LN513*
LN515*
LN49**
LB53**
*MFL67710803* www.lg.com
P/NO : MFL67710803 (1403-REV08)
Printed in Korea
<![endif]>ENGLISH
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 |
SAFETY INSTRUCTIONS |
9 |
INSTALLATION PROCEDURE |
9 |
ASSEMBLING AND PREPARING |
9 |
Unpacking |
11 |
Parts and buttons |
12 |
Lifting and moving the TV |
13 |
Setting up the TV |
13 |
- Attaching the stand |
14 |
Mounting on a table |
16 |
Mounting on a wall |
17 |
- Attaching the shelf stand |
18 |
- How to attach to masonry walls |
19 |
Tidying cables |
20 |
MAKING CONNECTIONS |
20 |
Antenna connection |
21 |
HDMI connection |
21 |
Component connection |
22 |
Composite connection |
22 |
USB connection |
23 |
Audio System connection |
23 |
- External Stereo Connection |
24 |
REMOTE CONTROL |
25 |
WATCHING TV |
25 |
Turning the TV on for the first time |
25 |
Watching TV |
25 |
Managing programmes |
25 |
- Automatically setting up |
26 |
programme |
- Manually setting up programme |
|
27 |
- Editing your programme list |
27 |
- Selecting a programme on the |
27 |
programme list |
Using additional options |
|
27 |
- Adjusting aspect ratio |
28 |
- Using the input list |
29 |
ENTERTAINMENT |
29 |
Connecting USB storage devices |
30 |
Browsing files |
31 |
Viewing photos |
32 |
Listening to music |
33 |
Viewing movies |
35 |
DivX® VOD Guide |
36 CUSTOMIZING TV SETTING
36 Accessing main menus
36 Customizing Settings
36 - SETUP Settings
37 - PICTURE Settings
39 - AUDIO Settings
41 - TIME Settings
41 - OPTION Settings
42 - LOCK Settings
42 |
TELETEXT |
42 |
Switch On/Off |
42 |
Simple Text |
42 |
- Page selection |
43 |
- Programming a colour button in |
43 |
LIST mode |
Fastext |
|
43 |
- Page selection |
43 |
Special Teletext Function |
44 MAINTENANCE
44 Cleaning your TV
44 - Screen, frame, cabinet and stand
44 - Power cord
44TROUBLESHOOTING
45SPECIFICATIONS
48 LICENSES
WARNING
yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
yy If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yy The note helps you understand and use the product safely. Please read the note carefully before using the product.
SAFETY INSTRUCTIONS 3
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y yDo not place the TV and/or remote control in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
y yMake sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
y yInsert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.
<![endif]>ENGLISH
y yDo not place the product where it might be exposed to dust.
This may cause a fire hazard.
y yMains Plug is the TV connecting/ disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.
y yDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
y yEnsure the power cord does not come into contact with hot objects such as a heater.
This may cause a fire or an electric shock hazard.
y yDo not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
y yBend antenna cable between inside and outside building to prevent rain from flowing in.
This may cause water damaged inside the Product and could give an electric shock.
<![endif]>ENGLISH
4 SAFETY INSTRUCTIONS
y yWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.
y yDo not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
y yDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
y yDispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor-
Medical Attention immediately if child consumes batteries.
y yDo not insert any metal objects/ conductors (like a metal chopstick/ cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model)
y yKeep the anti-moisture packing material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
y yDo not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
y yDo not put or store inflammable substances near the product. There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
y yDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
y yDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.
SAFETY INSTRUCTIONS 5
y yDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
You may be injured or the product can be damaged.
y yNever touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
y yNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
y yDo not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.
y yIf any of the following occur, unplug the product immediately and contact your local service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
y yUnplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/ shock/fire.
y yApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
y yDo not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.
CAUTION
y yInstall the product where no radio wave occurs.
y yThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
y yDo not install the product on places such as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 SAFETY INSTRUCTIONS
y yIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
y yIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. y yOnly use the attachments / accessories
specified by the manufacturer.
y yWhen installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.
y yWe recommend that youmaintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
y yOnly use the specified type of battery.
This could cause damage to the remote control.
y yDo not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
y yBatteries should not be exposed to excessive heat. For example, keep away from direct Sunlight, open fireplace and electric heaters.
y yDo not place non-rechargeable batteries in charging device.
y yMake sure there are no objects between the remote control and its sensor.
y ySignal from Remote Control can be interrupted due to external/
internal lighting eg Sunlight, fluorescent lighting.If this occurs turn off lighting or darken viewing area.
y yWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
y yDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
y yPlease follow the installation instructions below to prevent the product from overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
SAFETY INSTRUCTIONS 7
y yTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
y yPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
y yPrevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
y yProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
y yDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.
y yAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/ damage to screen.
y yWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
y yAs long as this unit is connected to the
AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.
y yWhen unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.
y yWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
y yWhen moving or unpacking the product, work in pairs because the product is heavy.
Otherwise, this may result in injury.
<![endif]>ENGLISH
<![endif]>ENGLISH
8 SAFETY INSTRUCTIONS
y yContact the service centre once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.
y yRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
y yIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
y yThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots
(red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the
performance and reliability of the product. This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.
y yYou may find different brightness and colour of the panel depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
y yDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.
The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.
y yGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is
required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1Open the package and make sure all the accessories are included.
2Attach the stand to the TV set.
3Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
|
B |
B |
|
|
< |
10 mm |
|
|
|
||
|
|
*A = |
|
A |
A |
< |
18 mm |
*B = |
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
<![if ! IE]><![endif]>ENGLISH
Remote control and |
|
Owner’s manual |
Cable holder |
|
batteries (AAA) |
|
|
|
(Depending on model) |
(See p.24) |
|
|
|
(See p.19) |
Power Cord |
|
Stand Screws |
|
Stand Screws |
|
|
3EA, P5 x L25 |
|
4EA, P5 x L25 |
|
|
4EA, M4 x L14 |
|
4EA, M4 x L14 |
|
|
(Only LN510*, LN511*, |
|
(Only LN515*) |
|
|
LN512*, LN513*, LN49**, |
|
(See p.13) |
|
|
LB53**) |
|
|
|
|
(See p.13) |
|
|
Stand Rack Screws |
|
Desk-mount Screw |
|
Wall Plate |
3EA, M4 x L8 |
|
(See p.14) |
|
(Only LN515*) |
(Only LN515*) |
|
|
|
(See p.17) |
(See p.17) |
|
|
|
|
Wall mount screws |
Wall mount anchors |
|
Stand Body / |
|
3EA, P5 x L69.5 |
3EA |
|
Stand Base |
|
(Only LN515*) |
(Only LN515*) |
|
(Only LN510*, LN511*, |
|
(See p.17) |
(See p.18) |
|
LN512*, LN513*, LN49**, |
|
|
|
|
|
LB53**) |
|
|
|
|
(See p.13) |
Stand Body / Stand Base
(Only LN515*) (See p.13, 17)
ASSEMBLING AND PREPARING 11
Parts and buttons
Screen
OK
SETTINGS
INPUT
Remote control sensor
Power indicator
buttons
Speakers
<![endif]>ENGLISH
Button |
Description |
|
|
|
Scrolls through the saved programmes. |
|
|
|
Adjusts the volume level. |
|
|
|
Selects the highlighted menu option or confirms an input. |
|
|
S |
Accesses the main menu, or saves your input and exits the menus. |
|
|
|
Changes the input source. |
|
|
|
Turns the power on or off. |
|
|
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
Lifting and moving the TV |
y y When transporting a large TV, there should |
|
|
Please note the following advice to prevent the |
be at least 2 people. |
y y When transporting the TV by hand, hold the |
|
TV from being scratched or damaged and for |
TV as shown in the following illustration. |
safe transportation regardless of its type and |
|
size. |
|
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy It is recommended to move the TV in the box or packing material that the TV originally came in.
yy Before moving or lifting the TV, disconnect the power cord and all cables.
yy When holding the TV, the screen should face away from you to avoid damage.
yy When transporting the TV, do not expose the TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen.
yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING 13
Setting up the TV |
LN515* |
|
Image shown may differ from your TV. |
1 |
|
|
|
Stand Body |
Attaching the stand |
|
|
LN510*, LN511*, LN512*, LN513*, LN49**, LB53** |
|
|
1 |
3EA |
|
|
Stand Base |
|
|
|
|
|
P5 x L25 |
2 |
|
|
|
|
Stand Body |
|
|
|
4EA |
|
Stand Base |
P5 x L25 |
2 |
|
3 |
4 3
<![endif]>ENGLISH
4EA |
4EA |
M4 x L14 |
M4 x L14 |
14 ASSEMBLING AND PREPARING
<![endif]>ENGLISH
CAUTION
yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
NOTE
yy Remove the stand before installing the
TV on a wall mount by performing the stand attachment in reverse.
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward, damage, and potential injury.
To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand.
Mounting on a table
1Lift and tilt the TV into its upright position on a table.
-- Leave a 10 cm (minimum) space from the wall for proper ventilation.
|
10 cm |
|
|
cm |
|
10 cm |
10 |
|
10 cm |
||
|
WARNING
yy To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING 15
Securing the TV to a wall
(This feature is not available for all models.)
1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with surface.
CAUTION
yy Make sure that children do not climb on or hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.
WARNING
yy If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
»» Using cabinets or stands recommended by the manufacturer of the television.
»» Only using furniture that can safely support the television.
»» Ensuring the television is not overhanging the edge of the supporting furniture.
»» Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
»» Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
»» Educating children about the dangers of climbing on furniture to reach the television or its controls.
Using the Kensington security system
(This feature is not available for all models.)
The Kensington security system connector is located at the rear of the TV. For more
information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the TV and a table.
<![endif]>ENGLISH