LG 29MA73D-PH Owner’s Manual
ENGLISH
OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV and retain
it for future reference.
29MA73D
www.lg.com
TABLE OF CONTENTS
2
ENGLISH
TABLE OF CONTENTS
3 LICENSES
4 INSTALLATION PROCEDURE
5 ASSEMBLING AND PREPARING
5 Unpacking
7 Parts and buttons
9 Lifting and moving the TV
10 Setting up the TV
10 - Attaching the Stand
12 - Detaching the Stand
13 - Mounting on a table
13 - Tidying cables
15 - Mounting on a wall
17 WATCHING TV
17 Turning the TV on for the first time
19 TV display (5:9 OSD)
19 - Programme Guide
20 PIP function
36 INSTALLING SCREEN SPLIT
37 CUSTOMIZING SETTINGS
37 Accessing the Main Menus
37 - TV, Component, AV
42 - DVI, HDMI IN 1, HDMI IN 2(MHL),
DisplayPort
49 USING THE USER GUIDE
49 Accessing User Guide menu.
50 MAINTENANCE
50 Cleaning Your TV
50 Screen and frame
50 Cabinet and stand
50 Power cord
51 Preventing “Image burn” or “Burn-in” on
your TV screen
52 TROUBLESHOOTING
22 MAKING CONNECTIONS
22 Connecting an antenna
23 Connecting to a HD receiver, DVD Player,
VCR or Gaming device
23 - HDMI connection
24 - DVI-D connection
25 - Component connection
26 - Composite connection
27 Headphone connection
28 Connecting a USB Device
29 Smartphone (MHL) connection
30 Connecting to a PC
31 - HDMI connection
32 - DVI-D connection
33 - DisplayPort connection
34 REMOTE CONTROL
54 SPECIFICATIONS
LICENSES
3
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
ENGLISH
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
VESA, VESA logo, Display Port Compliance Logo and Display Port Compliance
Logo for dual-mode source are all registered trademarks of the Video Electronics
Standards Association.
INSTALLATION PROCEDURE
4
ENGLISH
INSTALLATION PROCEDURE
1
2
3
Open the package and make sure all the accessories are included.
Attach the stand to the TV.
Connect an external device to the TV.
NOTE
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y
The available menus and options may differ from the input source or product model that you are
y
using.
New features may be added to this TV in the future.
y
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and accessories.
NOTE
The accessories supplied with your product may vary depending on the model.
y
Product specifications or contents in this manual may be changed without prior notice due to
y
upgrade of product functions.
CAUTION
Do not use any pirated items to ensure the safety and product life span.
y
Any damages or injuries by using unapproved or counterfeit parts or accessories are not covered
y
by the manufacturer’s warranty.
NOTE
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
y
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
y
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
ENGLISH
B
A
B
*A ≤ 10 mm
*B ≤ 18 mm
A
6
ENGLISH
ASSEMBLING AND PREPARING
Remote Control /
Batteries (AAA)
(See p.34, 35)
Stand Base
(See p.10, 12)
Cable Tie
CD (Owner's Manual) /
Cards
Stand Screws
2 EA
(See p.10, 12)
Power Cord
Stand Body
(See p.10, 12)
Stand Screw cover
(See p.10, 12)
AC-DC Adapter
(See p.13)
DVI-D cable
(See p.24, 32)
(See p.13) (See p.13)
Parts and buttons
ASSEMBLING AND PREPARING
Remote Control Sensor
Standby Light
Lighting On :
y
When Power is turned off
Lighting Off :
y
When Power is turned on
7
ENGLISH
Touch Buttons
NOTE
All of the buttons are touch sensitive and can be operated
y
through simple touch with your finger.
Power and control touch button are located on the bottom.
y
Touch button Description
Scrolls through the saved programmes.
Adjusts the volume level.
OK
SETTINGS Accesses the main menus, or saves your input and exits the menus.
INPUT Changes the input source.
/ I
Selects the highlighted menu option or confirms an input.
Turns the power on or off.
8
ENGLISH
ASSEMBLING AND PREPARING
Connection panel (See p.22)
Lifting and moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.
CAUTION
Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.
It is recommended to move the TV in the
y
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
y
the power cord and all cables.
Hold the top and bottom of the TV frame
y
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
When holding the TV, the screen should face
y
away from you to prevent the screen from
scratches.
When transporting the TV, do not expose the
y
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
y
upright, never turn the TV on its side, or tilt
towards the left or right.
9
ENGLISH
CAUTION
10
Setting up the TV
ENGLISH
Attaching the Stand
1
2
ASSEMBLING AND PREPARING
Place the screen face down.
CAUTION
To protect the screen from scratches, cover
y
the surface with a soft cloth.
Check the orientation (front and rear) of the
stand base and mount the Stand Body to the
Stand Hinge as shown in the figure.
Fix two screws into the back of the Stand Body
3
and close the Stand Screw Cover.
Stand Screw
Cover
Stand Body Stand Hinge
Attach the Stand Base from the Stand Body by
4
turning the screw to the right with a Coin.
Stand Body
Stand Base
ASSEMBLING AND PREPARING
11
CAUTION
Do not carry the TV upside-down as this
y
may cause it to fall off its stand, resulting in
damage or injury.
The illustration shows a general example of
y
installation and may look different from the
actual product.
ENGLISH
Do not carry the TV upside-down by holding
y
the stand body as this may cause it to fall
off, resulting in damage or injury.
The illustration shows a general example of
y
installation and may look different from the
actual product.
12
Detaching the Stand
ENGLISH
1
2
ASSEMBLING AND PREPARING
Place the screen face down.
CAUTION
To protect the screen from scratches, cover
y
the surface with a soft cloth.
Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
Stand Body
Open the Stand Screw Cover on the back of
3
the stand body and use a screw driver to remove the two screws.
Stand Base
Stand Screw Cover
ASSEMBLING AND PREPARING
13
Mounting on a table
Lift and tilt the TV into its upright position on a
1
table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Tidying cables
ENGLISH
Gather and bind the cables with the supplied
cable tie.
Cable Tie
NOTE
Connect the AC-DC Adapter and Power Cord
2
to a wall outlet.
CAUTION
Do not place the TV near or on sources
y
of heat, as this may result in fire or other
damage.
Disconnect the power cord first, and then
y
move or install the TV. Otherwise electric
shock may occur.
Tilt from -5 to +20 degrees up or down to
adjust the angle of the TV to suit your view.
-5 20
Front Rear
ASSEMBLING AND PREPARING
-5 20
:
-5 20
:
-5 20
:
-520
-520
14
ENGLISH
WARNING
When you adjust the angle, do not hold
y
the buttom of the TV frame as shown on
the following illustration, as may injure your
fingers.
Using the Kensington security system
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit
http://www.kensington.com
.
Connect the Kensington security system cable
between the TV and a table.
Be careful not to touch or press the screen
y
area when adjusting the angle of the TV.
Be careful not to press the screen with your
y
fingers or palm.
NOTE
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
Mounting on a wall
A
B
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
ASSEMBLING AND PREPARING
Please use VESA standard as below.
5
784.8 mm and under
y
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
787.4 mm and above
y
* Please use VESA standard wall mount pad
and screws.
VESA (A x B) 100 x 100
Standard screw M4
Number of screws 4
Wall mount bracket
(optional)
RW120
15
ENGLISH
10 cm
10 cm
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of
the TV.
When you install the TV using the wall mounting
interface (optional parts), attach it carefully so it
will not drop.
Please, Use the screw and wall mount interface
1
in accordance with VESA Standards.
If you use screw longer than standard, the TV
2
might be damaged internally.
If you use improper screw, the product might
3
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
VESA compatible only with respect to screw
4
mounting interface dimensions and mounting
screw specifications.
10 cm
VESA (A x B)
y
16
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
Disconnect the power cord first, and then
y
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
y
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
y
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
y
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
y
supplied with the wall mount.
WATCHING TV
17
WATCHING TV
Turning the TV on for the first time
When you access the TV for the first time, the initial setting screen appears. Select a language and
customize the basic settings.
Connect the power cord to a power outlet.
1
Press on the TV or power button on the remote control to turn the TV on.
2
The Standby Light is turned off.
NOTE
When the TV is in Power saving mode, the Standby Light turns amber.
The initial setting screen appears if you access the TV for the first time.
3
NOTE
If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting
menus will disappear.
Follow the on-screen instructions to customize your TV according to your preferences.
4
ENGLISH
City（城市）
展示模式選項
電源顯示燈
自動搜尋頻道
Select a city to display.
Selects Home Use(家用) for the home environment.
Selects the Standby Light(
the Standby Light
Scans and saves available programmes automatically.
(待機顯示燈
待機顯示燈
). If you select On(開啟), the TV turns on
) in the front panel when the TV is off.
Loading...