LG 27MP36HQ User Guide

Owner's Manual

IPS LED MONITOR LED LCD MONITOR (LED MONITOR*)

*LG LED Monitors are LCD Monitors with LED Backlighting.

Please read this manual carefully before operating your set and retain it for future reference.

IPS LED(LED LCD) MONITOR MODEL

19M37A

19M37D

19M37H

20M37A

20M37D

20M37H

20MP37A

22M37A

22M37D

22M37H

22M37HQ

22MC37D

24M37A

24M37D

24M37H

24M37HQ

24MC37D

27M37D

27MP37HQ

27MP37VQ

27MC37HQ

27MP36HQ

www.lg.com

TABLE OF CONTENTS

2

ENGLISH

ENG

LICENSE

3

19M37H

27MC37HQ

20M37H 22M37H 22M37HQ 24M37H 24M37HQ 27MP37HQ 27MP37VQ

27MP36HQ

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ENGLISH

ENG

The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive: *This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display. *To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.

ASSEMBLING AND PREPARING

4

ENGLISH

ENG

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

CD(Owner's Manual) /

Card

Power Cord

( Depending on the country )

( This cable is not included in all

D-SUB Cable

countries. )

AC-DC Adapter

or

AC-DC Adapter

( Depending on the country )

Stand Body

DVI-D Cable

Stand Base

( This cable is not included in all

countries. )

HDMI Cable

Stand Base

( This cable is not included in all

countries. )

ASSEMBLING AND PREPARING

5

CAUTION

Do not use any unapproved accessories to ensure the safety and product life span.

y

Any damages or injuries by using unapproved accessories are not covered by the warranty.

y

NOTE

The accessories supplied with your product may vary depending on the model.

y

Product specifications or contents in this manual may be changed without prior notice due to upgrade

y

of product functions.

ENGLISH

ENG

ENGLISH

ENG

ASSEMBLING AND PREPARING

6

Parts and buttons

Power Indicator

Lighting On: Turned on

y

Lighting Off: Turned off

y

(Power Button)

19M37A

24M37A

19M37D

24M37D 24MC37D 27M37D

20M37A

20MP37A

20M37D 22M37D 22MC37D

22M37A

19M37H

24M37HQ

20M37H 22M37H 24M37H

22M37HQ

27MP37HQ 27MC37HQ

HDMI IN

27MP37VQ

HDMI IN

Connection panel (See p.13~15)

Button (See p.16)

27MP36HQ

ASSEMBLING AND PREPARING

7

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.

It is advisable to place the monitor in the

y

original box or packing material before attempting to move it. Before moving or lifting the monitor, discon-

y

nect the power cord and all cables. Hold the top and bottom of the monitor frame

y

firmly. Do not hold the panel itself.

When holding the monitor, the screen should

y

face away from you to prevent it being scratched.

When moving the monitor, avoid any strong

y

shock or vibrations to the product. When moving the monitor, keep it upright,

y

never turn the monitor on its side or tilt it sideways.

CAUTION

As far as possible, avoid touching the moni-

y

tor screen. This may result in damage to the screen or some of the pixels used to create images.

ENGLISH

ENG

ASSEMBLING AND PREPARING

8

ENGLISH

ENG

Setting up the Monitor set

Attaching the Stand Base

Place the Monitor set with the screen side

1

down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

1

Attach the

2

Attach the

2

Tighten the screw to the right.

3

19M37A 20M37A 22M37A 24M37A

19M37D 20M37D 22M37D 24M37D

19M37H 20M37H 22M37H 24M37H

Stand Body Stand Base

20MP37A 22M37HQ 24M37HQ

to the monitor set.

.

22MC37D 24MC37D

27M37D 27MP37HQ 27MP37VQ 27MC37HQ

27MP36HQ

Stand Body

Stand Base

Stand Body

Stand Base

ASSEMBLING AND PREPARING

9

Detaching the Stand Base

Place the Monitor set with the screen side

1

down on a flat and cushioned surface.

19M37A 20M37A 22M37A 24M37A

2

19M37D 20M37D 22M37D 24M37D

19M37H 20M37H 22M37H 24M37H

20MP37A 22M37HQ 24M37HQ

22MC37D 24MC37D

Pull out the

1

Stand Body

from the monitor set. Turn the screw to the left.

2

3

Pull out the

Stand Body

Stand Base

and

.

Stand Base

27M37D 27MP37HQ 27MP37VQ 27MC37HQ

27MP36HQ

1

Turn the screw to the left.

2

Pull out the

3

Remove two screws and pull out the

Body

Stand Body

Stand Base

from the

from the monitor set.

Stand Body

Stand

ENGLISH

ENG

.

Stand Body

Stand Base

Stand Body

CAUTION

This illustration depicts the general model of

y

connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding

y

only the stand base. The product may fall and get damaged or injure your foot.

ASSEMBLING AND PREPARING

10

ENGLISH

ENG

Mounting on a table

Lift and tilt the Monitor set into its upright

1

position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

Press (Power) button on the bottom switch

3

panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

Connect the AC-DC Adapter and Power Cord

2

to a wall outlet.

or

Cable holder

ASSEMBLING AND PREPARING

11

WARNING

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Do not touch or press the screen when adjusting the angle of the monitor.

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit

Connect the Kensington security system cable between the Monitor set and a table.

http://www.kensington.com

.

ENGLISH

ENG

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

NOTE

The Kensington security system is optional. You can obtain it from most electronics stores.

Front Rear

ASSEMBLING AND PREPARING

12

ENGLISH

ENG

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1 If you use screw longer than standard, the moni-

tor might be damaged internally.

2 If you use improper screw, the product might be

damaged and drop from mounted position.

In this case, LG Electronics is not responsible

for it.

Model

Wall Mount (A x B)

Standard screw

Number of screws

19M37A

19M37D

19M37H

75 x 75

M4

4

20M37A

20M37D

20M37H

20MP37A

10 cm

22M37A

22M37D

22M37H

22M37HQ

22MC37D

Model

Wall Mount (A x B)

Standard screw

Number of screws

27M37D

24M37A

24M37D

100 x 100

M4

4

27MP37HQ

24M37H

24M37HQ

27MP37VQ

27MC37HQ

24MC37D

CAUTION

Disconnect the power cord first, and then

y

move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or

y

slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount

y

and contact the local dealer or qualified personnel. Do not over tighten the screws as this may

y

cause damage to the Monitor set and void your warranty. Use only screws and wall mounts that

y

meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. Screw length from outer surface of back

y

cover should be under 8mm.

Wall mount Pad

Back Cover

Wall mount Pad

Back Cover

Standard screw

Max.8mm

NOTE

Use the screws that are listed on the VESA

y

standard screw specifications. The wall mount kit will include an installation

y

manual and necessary parts. The wall mount bracket is optional. You can

y

obtain additional accessories from your local dealer. The length of screws may differ depending

y

on the wall mount. Be sure to use the proper length. For more information, refer to the

y

instructions supplied with the wall mount.

27MP36HQ

USING THE MONITOR SET

13

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports Plug & Play*.

y

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

D-SUB

DVI-D connection

Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.

19M37D

24M37D

20M37D

27M37D

22M37D

27MP37VQ

ENGLISH

ENG

22MC37D

24MC37D

RGB OUT

PC

NOTE

When using a D-Sub signal input cable

y

connector for Macintosh

Mac adapter

y

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

CAUTION

Connect the signal input cable

y

and tighten it by turning the screws clockwise. Do not press the screen with

y

your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the

y

screen for a long period of time to prevent image burn. Use a screensaver if possible.

USING THE MONITOR SET

14

ENGLISH

ENG

HDMI connection

Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations.

19M37H

24M37H

27MC37HQ

20M37H

24M37HQ

27MP36HQ

HDMI IN

22M37H

27MP37HQ

22M37HQ

27MP37VQ

Connecting to AV Devices

HDMI connection

Transmits the digital video and audio signals from your AV devices to the monitor. Connect your AV device to the monitor with the HDMI cable as illustrated below.

19M37H

24M37H

27MC37HQ

20M37H

24M37HQ

27MP36HQ

HDMI IN

22M37H

27MP37HQ

22M37HQ

27MP37VQ

HDMI OUT

PC

NOTE

If you use HDMI PC, it can cause compatibility

y

problem. Use a certified cable with the HDMI logo

y

attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. Recommended HDMI cable types

y

- High-Speed HDMI®/TM Cable

- High-Speed HDMI®/TM Cable with Ethernet

NOTE

When you want to use two PC in our Monitor,

y

please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold,

y

the screen may flicker. This is normal. Some red, green, or blue spots may appear

y

on the screen. This is normal.

HDMI OUT

A/V

NOTE

If you use HDMI PC, it can cause compatibility

y

problem. Use a certified cable with the HDMI logo

y

attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. Recommended HDMI cable types

y

- High-Speed HDMI®/TM Cable

- High-Speed HDMI®/TM Cable with Ethernet

USING THE MONITOR SET

15

Connecting to External Devices

Peripheral device connection

Connect peripheral devices to the monitor using headphone ports.

19M37H

24M37H

27MC37HQ

Peripheral devices are sold separately.

y

Cables with angled plugs may have clear-

y

ance issues, use straight plugs when possible.

NOTE

20M37H

24M37HQ

27MP36HQ

22M37H

27MP37HQ

22M37HQ

27MP37VQ

Self Image Setting Function

Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the " automatically. (Only supported in Analog Mode)

Self Image Setting

" Function is executed

NOTE

"Self Image Setting" Function.

y

This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)

‘AUTO’ Function.

y

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)

ENGLISH

ENG

Angle Type Straight Type

NOTE

Headphones or speakers may not work nor-

y

mally, depending on the server PC settings.

CUSTOMIZING SETTINGS

MENU

AUTO

INPUT

EXIT

READER

16

ENGLISH

ENG

CUSTOMIZING SETTINGS

Press the desired button on the bottom of the Monitor set.

1

Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.

2

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Select

3

EXIT

to leave the OSD menu.

FUNC.

Button Description

Accesses the main menus.(See p.17)

(Power Button)

OSD Locked/OSD Unlocked

Use this button to enter Reader Mode menu. Its function works to display screen as paper-like picture for Eye comfort.If you want to more information(See p.23).

Use this button to enter SMART ENERGY SAVING , Picture Mode,Color Wizard, DUAL DISPLAY, DUAL WEB menus.(See p.24~27)

When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)

The best display mode

You can choose the input signal.

• When two input signals are connected, you can select the input signal (D-SUB/DVI-D/

HDMI) you want.

• When only one signal is connected, it is automatically detected. The default setting is

D-SUB.

EXIT

EXIT the OSD(On Screen Display).

Turns the power on or off.

Power Indicator The power indicator stays white if the display is running properly (On

This function allow you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. Then OSD of “OSD Lock” will appear. After that, user can select lock or unlock by pressing left/right button. If user selects the “Lock” icon by pressing the “OK” button, the message “OSD Locked” will appear. Otherwise, “OSD Unlocked” will appear. After selecting the “Lock”, If you want to change to Unlock, you can push the “MENU” button for several seconds. The message “OSD Unlocked” will appear.

19M37A/19M37D/19M37H: 1366 x 768 20M37A/20M37D/20M37H/20MP37A: 1600 x 900 22M37A/22M37D/22MC37D/22M37H/22M37HQ/24M37A/24M37D/ 24MC37D/24M37H/24M37HQ/27M37D/27MP37HQ/27MP37VQ/ 27MC37HQ /27MP36HQ: 1920 x 1080

Mode). If the display is in Sleep Mode, the power indicator blinks white.

Monitor set Buttons

Customizing Settings

Menu Settings

CUSTOMIZING SETTINGS

17

ENGLISH

ENG

Press

1

Set the options by pressing the ◄ or ► or ▼

2

MENU

to display the

button on the bottom of the Monitor set

Menu

OSD.

buttons.

Select the "

3

Next Menu

" button to enter the more

option settings.

Select

4

EXIT

to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu Analog Digital HDMI Description

Brightness ● ● ●

Contrast ● ● ●

Response Time

22M37HQ 24M37HQ

27MP37HQ

27MC37HQ

Wide/Original

Reset

27MP37VQ

27MP36HQ

● ● ●

To adjust the brightness, contrast of the screen.

You can set a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use 'Off'. For a fast-moving picture, it is recommended that you use 'High'.

Wide

Switch to full screen mode according to input image signal.

Original

Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9).

Restore all factory default settings. Press the immediately.

◄

, ►

buttons to reset

ENGLISH

ENG

CUSTOMIZING SETTINGS

18

Menu > Next Menu Analog Digital HDMI Description

Picture Sharpness ● ● ●

Black Level

19M37H 20M37H

22M37H

22M37HQ

27MP37HQ 27MP37VQ

27MC37HQ

24M37H

24M37HQ

27MP36HQ

Over Scan

19M37H 20M37H

22M37H

22M37HQ

27MP37HQ 27MP37VQ

27MC37HQ 27MP36HQ

24M37H

24M37HQ

Color Gamma

Color Temp

Six Color

20MP37A

27MP37HQ 27MP37VQ

27MP36HQ

27MC37HQ

● ● ●

Color Reset

20MP37A

27MP37HQ 27MP37VQ

27MP36HQ

Display Horizontal

Vertical

Clock

Phase

27MC37HQ

●

Audio

19M37H 20M37H

22M37H

22M37HQ

27MP37HQ 27MP37VQ

27MC37HQ

24M37H

24M37HQ

27MP36HQ

Volume ●

To adjust the clearness of the screen

●

To set offset level

To improve the clarity and stability of the

●

screen

To customize the color of the screen

To adjust the position of the screen

To improve the clarity and stability of the screen

To adjust the volume

Others Language

Power Indicator

Automatic Standby

19M37H 20M37H

22M37H

22M37HQ

27MP37HQ 27MP37VQ

27MC37HQ 27MP36HQ

Resolution ●

Analog:

y

Digital:

y

HDMI:

y

D-SUB(Analog signal) input.

DVI-D(Digital signal) input.

HDMI(Digital signal) input.

24M37H

24M37HQ

● ● ●

To customize the screen status for a user's operating environment

Picture

Press

1

to display the

MENU

button on the bottom of the Monitor set

Menu

OSD.

CUSTOMIZING SETTINGS

19

ENGLISH

ENG

Select the "

2

Next Menu

" button to enter the more

option settings.

Enter to

3

Set the options by pressing the ◄ or ► or ▼

4

Picture

by pressing the ▼ button.

buttons.

Select

5

EXIT

to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Picture Description

Sharpness To adjust the clearness of the screen.

Black Level You can set the offset level. If you select 'High', the screen will be bright and if

19M37H 20M37H

22M37H

22M37HQ

27MP37HQ 27MP37VQ 27MC37HQ

24M37H

24M37HQ

27MP36HQ

you select ‘Low’, the screen will be dark.(only for HDMI input) * Offset?As the criteria for video signal, it is the darkest screen the monitor can show.

Over Scan To select the range of output image for DTV timing in HDMI input.(only for HDMI

19M37H 20M37H

22M37H

22M37HQ

27MP37HQ 27MP37VQ 27MC37HQ

24M37H

24M37HQ

27MP36HQ

input)Recommend overscan function to turn on when connect AV equipment.

ENGLISH

ENG

CUSTOMIZING SETTINGS

20

Color

Press

1

MENU

to display the

button on the bottom of the Monitor set

Menu

OSD.

Select the "

2

Next Menu

" button to enter the more

option settings.

Select

3

Enter to

4

Set the options by pressing the ◄ or ► or ▼

5

Color

by pressing the ► button.

Color

by pressing the ▼ button.

buttons.

Select

6

EXIT

to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Color Description

Gamma Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2, Off on

Color Temp Custom

Six Color Sets and stores the hue and saturation for six colors(Red/Green/Blue/Cyan/

20MP37A

27MP37HQ 27MP37VQ

27MP36HQ

Color Reset Resets the color settings to the factory default settings for the current input

20MP37A

27MP37HQ 27MP37VQ

27MP36HQ

27MC37HQ

the monitor, high gamma values display whitish images and low gamma values display blackish images. If user don't want adjusted gamma, user can select Gamma off.

• Red:

Set your own red color levels.

• Green:

• Blue:

Select the screen color.

Warm: Medium: Cool:

Magenta/Yellow) to satisfy the color requirements of a user.

Hue Adjusts the screen hue.

Saturation Adjusts the color sharpness on the screen. Lower values make

device.

Set your own green color levels.

Set your own blue color levels.

Set the screen to warm color temperature (more red).

Set the screen to medium color temperature.

Set the screen to cool color temperature (more blue).

the color sharpness weaker and colors lighter while higher values make the color sharpness stronger and colors dark.

Display

Press

1

to display the

MENU

button on the bottom of the Monitor set

Menu

OSD.

CUSTOMIZING SETTINGS

21

ENGLISH

ENG

Select the "

2

option settings.

Select

3

Enter to

4

Set the options by pressing the ◄ or ► or ▼

5

buttons.

Select

6

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Display Description

Horizontal To move image left and right.

Vertical To move image up and down.

Clock To minimize any vertical bars or stripes visible on the screen background.The

Phase To adjust the focus of the display. This item allows you to remove any horizontal

Next Menu

Display

EXIT

by pressing the ► button.

Display

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

horizontal screen size will also change.

noise and clear or sharpen the image of characters.

Audio

19M37H 20M37H 22M37H

22M37HQ

Press

1

Select the "

2

Select

3

Enter to

4

Set the options by pressing the ◄ or ► buttons.

5

Select

6

Each option is explained below.

Volume To adjust the volume of headphone/earphone.(Only for HDMI input)

24M37HQ

MENU

Menu

the

settings.

Audio

Volume

EXIT

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Menu > Next Menu > Audio Description

27MP37HQ 27MP37VQ 27MC37HQ

button on the bottom of the Monitor set to display

OSD.

Next Menu

by pressing the ► button.

by pressing the ▼ button.

to leave the OSD menu.

24M37H

" button to enter the more option

27MP36HQ

ENGLISH

ENG

CUSTOMIZING SETTINGS

22

Others

Press

1

MENU

to display the

button on the bottom of the Monitor set

Menu

OSD.

Select the "

2

Next Menu

" button to enter the more

option settings.

Select

3

Enter to

4

Set the options by pressing the ◄ or ► or ▼

5

Others

by pressing the ► button.

Others

by pressing the ▼ button.

buttons.

Select

6

EXIT

to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Others Description

Language To choose the language in which the control names are displayed.

Power Indicator Use this function to set the power indicator on the bottom side of the monitor to On or

Automatic Standby The monitor will automatically switch to standby mode after a certain period.

19M37H 20M37H

22M37H

22M37HQ

27MP37HQ 27MP37VQ

27MC37HQ

24M37H

24M37HQ

27MP36HQ

Off.If you set Off, it will go off. If you set On at any time, the power indicator will automatically be turned on.

Resolution User can set the desired resolution. The function is enabled only when the screen

resolution on your computer is set to the following, except that the PC output wrong resolution.

19M37A 19M37D 19M37H

20M37A 20M37D

22M37A

24M37A

27M37D

22MC37D

22M37D

24M37D

27MP37HQ

24MC37D

20M37H 20MP37A

22M37H

24M37H 24M37HQ

27MP37VQ

27MC37HQ

22M37HQ

27MP36HQ

Off, 1024x768, 1280x768, 1360x768, 1366x768

Off, 1280x960, 1600x900

Off, 1440x900, 1600x900

CUSTOMIZING SETTINGS

23

FUNC. Setting

SMART ENERGY SAVING

Press

1

Enter to

2

Set the options by pressing the ◄ or ► buttons.

3

Select

4

Each option is explained below.

SMART ENERGY SAVING Description

High

Low

Off Disables SMART ENERGY SAVING .

SMART ENERGY SAVING:

*

FUNC.

display the

button.

upper menu or set other menu items, use the up arrow

( ) button.

button on the bottom of the Monitor set to

FUNC.

OSD.

SMART ENERGY SAVING

EXIT

to leave the OSD menu.To return to the

Enables SMART ENERGY SAVING you can save energy with this energy- high efficient function.

Enables SMART ENERGY SAVING you can save energy with this energy- low efficient function.

Conserve energy by using luminance compensation algorithm.

by pressing the ▼

NOTE

Saving Data depends on the Panel. So,those values should be different from each panel and panel

y

vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source. If option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and

y

Reader Mode and Color Wizard will automatically be Off.

Picture Mode

CUSTOMIZING SETTINGS

25

ENGLISH

ENG

Press

1

Select

2

Enter to

3

Set the options by pressing the ◄ or ► buttons.

4

Select

5

FUNC.

to display the

Picture Mode

EXIT

to leave the OSD menu.To return to the

button on the bottom of the Monitor set

FUNC.

OSD.

by pressing the ► button.

by pressing the ▼ button.

upper menu or set other menu items, use the up

arrow( )button.

Each option is explained below.

Picture Mode Description

Custom It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

Text It is a mode that the screen is adjusted to the best for the textworks.

Photo It is a mode that the screen is adjusted to the best to view pictures.

Cinema It is a mode that the screen is adjusted to the best to view the videos.

Game It is a mode that the screen is adjusted to the best to play a game.

19M37H 20M37H 22M37H

22M37HQ

Custom It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

Vivid 1 Adjusts the video image for the retail environment by enhancing the contrast, brightness, Colour,

Vivid 2

Standard Adjusts the image for the normal environment.

Cinema It is a mode that the screen is adjusted to the best to view the videos.

24M37HQ

Picture Mode Description

27MP37HQ 27MP37VQ 27MC37HQ

and sharpness.

24M37H

27MP36HQ

NOTE

If option of Picture Mode is non-Custom , Reader Mode, SMART ENERGY SAVING and Color Wizard

will automatically be Off.

ENGLISH

ENG

CUSTOMIZING SETTINGS

26

Color wizard

Press

1

FUNC.

to display the

button on the bottom of the Monitor set

FUNC.

OSD.

Select

2

Enter to

3

Set the options by pressing the ◄ or ► buttons.

4

Select

5

Each option is explained below.

Off

Red weakness It is a mode for user who has inability to see red color. It make color weakness user

Green weakness It is a mode for user who has inability to see green color. It make color weakness user

Color wizard

EXIT

to leave the OSD menu.To return to the

upper menu or set other menu items, use the up

arrow ( ) button.

Color wizard Description

by pressing the ► button.

by pressing the ▼ button.

It is a mode that Color Wizard mode is off.

can easily distinguish red colors.

can easily distinguish green colors.

NOTE

This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please

y

turn off this function. This function can’t distinguish some colors in some images.

y

If option of Color Wizard is not Off , Reader Mode and SMART ENERGY SAVING will be Off and

y

Picture Mode will automatically be Custom.

CUSTOMIZING SETTINGS

* Before using below functions, please install DUAL SMART SOLUTION programme.

DUAL DISPLAY

27

ENGLISH

ENG

Press

1

Select

2

Enter to

3

Set the options by pressing the ◄ or ► buttons.

4

Select

5

Each option is explained below.

Clone By selecting Clone,user can use secondary monitor as done mode of primary monitor.

Extended By selecting Extended,user can use secondary monitor as extended mode of primary

Off If select Off,DUAL DISPLAY is off.

* Before using below functions, please install DUAL SMART SOLUTION programme.

FUNC.

button on the bottom of the Monitor set

to display the

upper menu or set other menu items, use the up

arrow ( ) button.

DUAL DISPLAY Description

FUNC.

OSD.

DUAL DISPLAY

EXIT

to leave the OSD menu.To return to the

by pressing the ► button.

by pressing the ▼ button.

monitor.

DUAL WEB

Press

1

FUNC.

to display the

button on the bottom of the Monitor set

FUNC.

OSD.

Select

2

Enter to

3

Set the options by pressing the ◄ or ► buttons.

4

Select

5

Each option is explained below.

On Help user to browse web efficiently by dividing in half. Help to arrange and move

Off If select Off,DUAL WEB is off.

DUAL WEB

EXIT

upper menu or set other menu items, use the up

arrow ( ) button.

DUAL WEB Description

by pressing the ► button.

by pressing the ▼ button.

to leave the OSD menu.To return to the

windowson screen. Help user to control dividedwindows ratio.

NOTE

When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD

y

appear and user should press dual button -> User can bring back to normal mode.

TROUBLESHOOTING

28

ENGLISH

ENG

TROUBLESHOOTING

Check the following before calling for service.

No image appears

Is the power cord of the display connected?

Is the power indicator light on?

Is the power on and the power indicator White?

Is the power indicator flickering?

Do you see an "OUT OF RANGE" message on the screen?

Do you see a "NO SIGNAL" message on the screen?

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD LOCKED” when you push MENU button?

yCheck and see if the power cord is connected properly to the power

outlet.

yPress the Power button.

yAdjust the brightness and the contrast.

yIf the display is in power saving mode, try moving the mouse or

pressing any key on the keyboard to bring up the screen.

yTry to turn on the PC.

yThis message appears when the signal from the PC (video card) is

out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.

yWhen the monitor is on "No-Signal" in 5 minutes, the monitor goes to

DPM mode.

yYou can secure the current control settings, so that they cannot be

inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.

Display image is incorrect

Display Position is incorrect.

On the screen background, vertical bars or stripes are visible.

Any horizontal noise appearing in any image or characters are not clearly portrayed.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yCheck

Control Panel ► Display ► Settings

and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).

TROUBLESHOOTING

CAUTION

Control Panel ► Display ► Settings

Check

y

changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the

y

screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned

y

above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

Display image is incorrect

The screen color is mono or abnormal.

The screen blinks.

yCheck if the signal cable is properly connected and use a screwdriver

to fasten if necessary. yMake sure the video card is properly inserted in the slot. ySet the color setting higher than 24 bits (true color) at

► Settings

yCheck if the screen is set to interlace mode and if yes, change it to the

recommend resolution.

and see if the frequency or the resolution were

Control Panel

.

29

ENGLISH

ENG

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Have you installed the display driver?

yBe sure to install the display driver from the display driver CD (or

diskette) that comes with your display. Or, you can also download the

driver from our web site: http://www.lg.com. yMake sure to check if the video card supports Plug&Play function.

SPECIFICATIONS

30

SPECIFICATIONS

ENGLISH

ENG

19M37A 19M37D 19M37H

Display Screen Type Flat Panel Active matrix-TFT LCD

Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch)

Resolution Max 1366 x 768 @ 60 Hz

Recommend VESA 1366 x 768 @ 60 Hz

Power Consumption

Power Input 19 V

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 2.1 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 13 W (ENERGY STAR® standard)*

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

0.8 A

Type ADS-18SG-19-3 19016G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPG, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPI, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPCU, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPB, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP42, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-U, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V

With Stand 44.1 cm x 34.9 cm x 16.8 cm

Without Stand 44.1 cm x 27.5 cm x 5.7 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

0.84 A

Anti-Glare coating

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard.

Sync Input Horizontal

Frequency

30 kHz to 83 kHz (Automatic)

30 kHz to 61 kHz (Automatic)

Vertical Frequency

56 Hz to 75 Hz (D-SUB)

56 Hz to 75 Hz (DVI-D)

56 Hz to 61 Hz (HDMI)

Input Form Separate Sync.

Digital

Video Input Signal Input 15 pin D-SUB

Connector

DVI-D Connector (Digital)

HDMI Connector

Input Form RGB Analog (0.7

Vp-p/ 75 ohm)

Digital

Plug & Play DDC 2B(Analog)

DDC 2B(Digital)

DDC 2B(HDMI)

SPECIFICATIONS

19M37A 19M37D 19M37H

● ● ●

●

● ● ●

● ●

● ● ●

●

● ● ●

● ●

● ● ●

●

31

ENGLISH

ENG

SPECIFICATIONS

32

SPECIFICATIONS

ENGLISH

ENG

20M37A 20M37D 20M37H 20MP37A

Display Screen Type Flat Panel Active matrix-TFT LCD

Pixel Pitch 0.271 mm x 0.262 mm (Pixel Pitch)

Resolution Max 1600 x 900 @ 60 Hz

Recommend VESA 1600 x 900 @ 60 Hz

Power Consumption

Power Input 19 V

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 2.2 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 16 W (ENERGY STAR® standard)*

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

0.8 A

Type ADS-18SG-19-3 19016G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPG, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPI, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPCU, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-18FSG-19 19016GPB, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP42, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP36-U, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V

With Stand 46.3 cm x 35.7 cm x 16.8 cm

Without Stand 46.3 cm x 28.7 cm x 5.7 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

0.84A

Anti-Glare coating

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard.

SPECIFICATIONS

33

Sync Input Horizontal

Frequency

30 kHz to 83 kHz (Automatic)

30 kHz to 61 kHz (Automatic)

Vertical Frequency 56 Hz to 75 Hz

(D-SUB)

56 Hz to 75 Hz (DVI-D)

56 Hz to 61 Hz (HDMI)

Input Form Separate Sync.

Digital

Video Input Signal Input 15 pin D-SUB

Connector

DVI-D Connector (Digital)

HDMI Connector

Input Form RGB Analog (0.7

Vp-p/ 75 ohm)

Digital

Plug & Play DDC 2B(Analog)

DDC 2B(Digital)

DDC 2B(HDMI)

20M37A 20M37D

● ● ● ●

●

● ● ● ●

● ●

● ● ● ●

●

● ● ● ●

● ●

● ● ● ●

●

20M37H

●

20MP37A

ENGLISH

ENG

SPECIFICATIONS

34

SPECIFICATIONS

ENGLISH

ENG

22M37A 22M37D 22M37H 22M37HQ 22MC37D

Display Screen Type Flat Panel Active matrix-TFT LCD

Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch)

Resolution Max 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

Power Consumption

Power Input 19 V

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 2.6 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 18 W (ENERGY STAR® standard)*

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V

With Stand 50.9 cm x 38.7 cm x 18.1 cm

Without Stand 50.9 cm x 31.6 cm x 5.7 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

1.3 A

Anti-Glare coating

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard.

SPECIFICATIONS

35

Sync Input Horizontal

Frequency

30 kHz to 83 kHz (Automatic)

30 kHz to 61 kHz (Automatic)

Vertical Frequency 56 Hz to 75 Hz

(D-SUB)

56 Hz to 75 Hz (DVI-D)

56 Hz to 61 Hz (HDMI)

Input Form Separate Sync.

Digital

Video Input Signal Input 15 pin D-SUB

Connector

DVI-D Connector (Digital)

HDMI Connector

Input Form RGB Analog (0.7

Vp-p/ 75 ohm)

Digital

Plug & Play DDC 2B(Analog)

DDC 2B(Digital)

DDC 2B(HDMI)

22M37A

● ● ● ●

22M37D/

22MC37D

●

● ● ●

●

● ● ●

●

22M37H

● ●

22M37HQ

ENGLISH

ENG

SPECIFICATIONS

36

SPECIFICATIONS

ENGLISH

ENG

24M37A 24M37D 24M37H 24M37HQ 24MC37D

Display Screen Type Flat Panel Active matrix-TFT LCD

Pixel Pitch 0.272 mm x 0.272 mm (Pixel Pitch)

Resolution Max 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

Power Consumption

Power Input 19 V

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 3.0 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 19 W (ENERGY STAR® standard)*

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V

With Stand 55.6 cm x 41.7 cm x 18.1 cm

Without Stand 55.6 cm x 34.4 cm x 5.7 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

1.3 A

Anti-Glare coating

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard.

SPECIFICATIONS

37

Sync Input Horizontal

Frequency

30 kHz to 83 kHz (Automatic)

30 kHz to 61 kHz (Automatic)

Vertical Frequency 56 Hz to 75 Hz

(D-SUB)

56 Hz to 75 Hz (DVI-D)

56 Hz to 61 Hz (HDMI)

Input Form Separate Sync.

Digital

Video Input Signal Input 15 pin D-SUB

Connector

DVI-D Connector (Digital)

HDMI Connector

Input Form RGB Analog (0.7

Vp-p/ 75 ohm)

Digital

Plug & Play DDC 2B(Analog)

DDC 2B(Digital)

DDC 2B(HDMI)

24M37A 24M37HQ

● ● ● ●

24M37D/

24MC37D

●

● ● ●

●

● ● ●

●

24M37H

● ●

ENGLISH

ENG

SPECIFICATIONS

38

SPECIFICATIONS

ENGLISH

ENG

27M37D 27MP37HQ 27MP36HQ27MP37VQ 27MC37HQ

Display Screen Type Flat Panel Active matrix-TFT LCD

Pixel Pitch 0.311 mm x 0.311 mm (Pixel Pitch)

Resolution Max 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

Power Consumption

Power Input 19 V

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 4.8 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 27 W (ENERGY STAR® standard)*

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

1.6 A

Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V

With Stand 64.1 cm x 48.8 cm x 21.2 cm

Without Stand 64.1 cm x 39.3 cm x 7.1 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

1.7 A

Anti-Glare coating

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard.

SPECIFICATIONS

39

Sync Input Horizontal

Frequency

30 kHz to 83 kHz (Automatic)

30 kHz to 61 kHz (Automatic)

Vertical Frequency

56 Hz to 75 Hz (D-SUB)

56 Hz to 75 Hz (DVI-D)

56 Hz to 61 Hz (HDMI)

Input Form Separate Sync.

Digital

Video Input Signal Input 15 pin D-SUB

Connector

DVI-D Connector (Digital)

HDMI Connector

Input Form RGB Analog (0.7 Vp-

p/ 75 ohm)

Digital

Plug & Play DDC 2B(Analog)

DDC 2B(Digital)

DDC 2B(HDMI)

27MP37HQ/

27M37D

27MC37HQ/

27MP36HQ

● ● ●

● ●

● ● ●

● ●

● ● ●

● ●

27MP37VQ

ENGLISH

ENG

ENGLISH

ENG

SPECIFICATIONS

40

Preset Modes (Resolution)

D-SUB/DVI-D Timing

19M37A 19M37D 19M37H

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

832 x 624 49.725 75 -/-

1024 x 768 48.363 60 -/-

1366 x 768 47.712 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

20M37A 20M37D 20M37H 20MP37A

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 +/+

1152 x 864 67.500 75 +/+

1600 x 900 60.000 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

22M37A 22M37D 22M37H 22M37HQ 24M37A 24M37D

27MP36HQ

24M37H 24M37HQ 27M37D 27MP37HQ 27MP37VQ 22MC37D 24MC37D 27MC37HQ

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 +/+

1152 x 864 67.500 75 +/+

1280 x 1024 63.981 60 +/+

1280 x 1024 79.976 75 +/+

1680 x 1050 65.290 60 -/+

1920 x 1080 67.500 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

HDMI Timing

19M37H

24M37H 24M37HQ 27MP37HQ 27MP37VQ 27MC37HQ

20M37H

22M37H 22M37HQ

27MP36HQ

SPECIFICATIONS

41

ENGLISH

ENG

Factory support mode (Preset Mode)

480P 31.50 60 O

576P 31.25 50 O

720P 37.50 50 O

720P 45.00 60 O

1080P 56.25 50 O

1080P 67.50 60

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Recommend Mode

Indicator

Mode LED Color

On Mode White (Only 15 seconds)

Sleep Mode Blinking White

Off Mode Off

HDMI

O

PROPER POSTURE

42

ENGLISH

ENG

horizontally outright.

PROPER POSTURE

Proper posture for using the Monitor set.

Adjust the

Monitor set and

your posture to

allow you to view

images at the

optimal viewing

angle.

Place your hands

gently on the

keyboard, keeping

your arms bent at

the elbows and

Adjust the location of the Monitor set to avoid it reflecting light.

Declaration of Conformity

Trade Name: LG Model : 19M37A, 19M37D, 19M37H, 20M37A,

20M37D, 20M37H, 20MP37A, 22M37A, 22M37D, 22MC37D, 22M37H, 22M37HQ, 24M37A, 24M37D, 24MC37D, 24M37H, 24M37HQ, 27M37D, 27MP37HQ,

27MP37VQ, 27MC37HQ, 27MP36HQ Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534

*above information is only for USA FCC Regulatory

Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.

MODEL

SERIAL

LG 27MP36HQ User Guide

CONTENTS

LICENSE

ASSEMBLING AND PREPARING

Unpacking

Parts and buttons

Moving and Lifting the Monitor

Setting up the Monitor set

Attaching the Stand Base

Detaching the Stand Base

Mounting on a table

Using the cable holder

Mounting on a wall

USING THE MONITOR SET

Connecting to a PC

D-SUB connection

DVI-D connection

HDMI connection

Connecting to AV Devices

HDMI connection

Connecting to External Devices

Peripheral device connection

CUSTOMIZING SETTINGS

Customizing Settings

Menu Settings

Picture

Color

Display

Audio

Others

READER Setting

FUNC. Setting

SMART ENERGY SAVING

Picture Mode

Color wizard

DUAL DISPLAY

DUAL WEB

TROUBLESHOOTING

Preset Modes (Resolution)

Indicator

PROPER POSTURE

Proper posture for using the Monitor set.