LG 26LN450U, 26LN457U User manual [en,no]

Drawn

Checked

Approved

Printing Specification

Signature

SH JO

YN PARK

Jongok.kim

MMM/DD/YYYY

Jan/30/2013

Jan/30/2013

Jan/30/2013

1. Model Description

Model name

:

26LN4500-ZA

Brand name

:

LG

Part number

: MFL67707904

2nd, 3rd Suffix

:

EN

Product name

:

26LN4500-ZA

(Revision number)

(1302-REV00)

2. Printing Specification

1.

Trim size (Format)

:

182 mm x 257 mm (B5)

2.

Printing colors

• Cover

:

1 Color (Black)

• Inside

:

1 Color (Black)

3.

Stock (Paper)

• Cover

:

Coted, Snow white paper 150 g/

• Inside

:

Uncoted, wood-free paper 60 g/

4.

Printing method

:

Off set

5.

Bindery

:

Perfect binding

6.

Language

:

ENG/SWE/NOR/DAN/FIN (5)

7.

Number of pages

:

136

“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

N

Details should be followed Eco-SCM management standard[LG(56)-A-2524].

O

Especially, Part should be followed and controlled the following specification.

T

(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.

E

(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

3. Origin Notification

LGEAK

:

Printed in Kazakhstan

LGEKR

:

Printed in Korea

LGERS

:

Printed in Mexico

LGEAZ

:

Printed in Brazil

LGEMA

:

Printed in Poland

LGESY

:

Printed in China

LGEEG

:

Printed in Egypt

LGEMX

:

Printed in Mexico

LGETH

:

Printed in Thailand

LGEIL

:

Printed in India

LGEND

:

Printed in China

LGEVN

:

Printed in Vietnam

LGEIN

:

Printed in Indonesia

LGERA

:

Printed in Russia

LGEWR

:

Printed in Poland

4. Changes

10

9

8

7

6

5

4

3

2

1

Rev. Number MMM/DD/YYYY Signature

ECO Number

Change Contents

Part number

:

MFL67707904

Pagination sheet

(Revision number)

(1302-REV00)

Total pages

:

136 pages

Front

P/No.

A-2

…

A-4

Front

(EN)

2

…

…

21

Blank

Front

(SWE)

2

…

…

21

Blank

Front

(NOR)

2

…

…

21

Blank

Front

(DEN)

2

…

…

21

Blank

Front

(FIN)

2

…

…

21

Blank

Back

Cover

B-1

B-2

…

B-20

B-21

OWNER’S MANUAL

LED TV

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

LN45**

P/NO : MFL67707904(1302-REV00)	www.lg.com
Printed in Korea

A-2 TABLE OF CONTENTS

TABLE OF CONTENTS

A-3 SETTING UP THE TV

A-3 Attaching the stand

A-3 Detaching the stand

A-4 Tidying cables

LANGUAGE LIST

English

Svenska

Norsk

Dansk

Suomi

B-1 MAKING CONNECTIONS

B-1 Antenna connection

B-2 Satellite dish connection

B-3 Adapter connection

B-4 HDMI connection

B-5 DVI to HDMI connection

B-7 MHL connection

B-8 RGB connection

B-9 Component connection

B-10 Composite connection

B-11 Euro Scart connection

B-13 USB connection

B-13 CI module connection

B-15 Headphone connection

B-19 SPECIFICATIONS

COMMON

LANGUAGE

COMMON

	SETTING UP THE TV A-3
Setting up the TV
Image shown may differ from your TV.	Detaching the Stand
Attaching the stand
22/24/26/28/29LN45**	22/24/26/28/29LN45**

1

1

Stand Base

Stand Base

2

2

CAUTION

y yWhen attaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

NOTE

yy When Detaching the stand from TV, Detach the stand with lifting up the lever in the direction of the arrow.

A-4 SETTING UP THE TV

Tidying cables

Gather and bind the cables with the cable holder.

Cable Holder

CAUTION

yy Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur.

OWNER’S MANUAL

LED TV

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 TABLE OF CONTENTS

TABLE OF CONTENTS

3	LICENSES
3	OPEN SOURCE SOFTWARE NOTICE

3EXTERNAL CONTROL DEVICE SETUP

4SAFETY INSTRUCTIONS

10 INSTALLATION PROCEDURE

10 ASSEMBLING AND PREPARING

10 Unpacking

13Parts and buttons

14Lifting and moving the TV

15Mounting on a table

16Mounting on a wall

18REMOTE CONTROL

19ENTERTAINMENT

19Wired Network Connection

19Network setting

20USING THE USER GUIDE

21MAINTENANCE

21 Cleaning your TV

21 - Screen, frame, cabinet and stand

21 - Power cord

21 TROUBLESHOOTING

WARNING

yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

yy If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

yy The note helps you understand and use the product safely. Please read the note carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 3

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays

DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

EXTERNAL CONTROL DEVICE SETUP

<![if ! IE]>

<![endif]>ENGLISH

To obtain the external control device setup information, please visit www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

4 SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yy Do not place the TV and remote control in the following environments: --A location exposed to direct sunlight

--An area with high humidity such as a bathroom

--Near any heat source such as stoves and other devices that produce heat --Near kitchen counters or humidifiers where they can easily be exposed to steam

or oil

--An area exposed to rain or wind --Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

yy Do not place the product where it might be exposed to dust. This may cause a fire hazard.

Mains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

yy Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yy Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

yy Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.

yy Ensure the power cord does not come into contact with hot objects such as a heater.

This may cause a fire or an electric shock hazard.

yy Do not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.

yy Bend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the Product and could give an electric shock.

yy When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.

Desiccant

SAFETY INSTRUCTIONS 5

yy Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

yy Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

yy Keep the packing anti-moisture material or vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yy Do not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

yy Dispose of used batteries carefully to protect a child from eating them.

Please seek DoctorMedical Attention immediately if child consumes batteries.

yy Do not insert any metal objects/conductors (like a metal chopstick/cutlery/ screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

You may be electrocuted.(Depending on model)

yy Do not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

yy Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

yy Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.

yy Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.

You may be injured or the product can be damaged.

yy Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted.

yy Never touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6 SAFETY INSTRUCTIONS

yy Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

yy If any of the following occur, unplug the product immediately and contact your local service centre.

--The product has been impacted by shock --The product has been damaged --Foreign objects have entered the product

--The product produced smoke or a strange smell This may result in fire or electric shock.

yy Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.

Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.

yy Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

SAFETY INSTRUCTIONS 7

CAUTION

yy Install the product where no radio wave occurs.

yy There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

yy Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.

Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

yy If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

yy If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

yy Only use the attachments / accessories specified by the manufacturer.

yy When installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.

yy We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.

If you watch TV for a long period of time, this may cause blurred vision.

yy Only use the specified type of battery.

This could cause damage to the remote control.

yy Do not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

yy Batteries should not be exposed to excessive heat.eg keep away from direct Sunlight , open fireplace and electric heaters .

yy Do not place non-rechargeable batteries in charging device.

yy Make sure there are no objects between the remote control and its sensor.

yy Signal from remote control can be interrupted due to external/internal lighting eg sunlight, fluorescent lighting.

If this occurs turn off lighting or darken viewing area.

yy When connecting external devices such as video game consoles, make sure the connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8SAFETY INSTRUCTIONS

yy Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

yy Please follow the installation instructions below to prevent the product from overheating.

--The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in

a cupboard).

--Do not install the product on a carpet or cushion.

--Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.

yy Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

yy Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

yy Prevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.

yy Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

yy Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.

yy Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.

yy When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

yy As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

yy When unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.

yy When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

SAFETY INSTRUCTIONS 9

yy When moving or unpacking the product, work in pairs because the product is heavy.

Otherwise, this may result in injury.

yy Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.

yy Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yy If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yy The panel is a high technology product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yy You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yy Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yy Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yy Image shown may differ from your TV.

yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yy The available menus and options may differ from the input source or product model that you are using.

yy New features may be added to this TV in the future.

yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

4Make sure the network connection is available.

You can use the TV network functions only when the network connection is made. (Depending on model)

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yy Do not use any unapproved items to ensure the safety and product life span.

yy Any damages or injuries by using unapproved items are not covered by the warranty. yy Some models have a thin film attached on to the screen and this must not be removed.

NOTE

yy The items supplied with your product may vary depending on the model.

yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

B B

*A =< 10 mm

*B <= 18 mm

A A

ASSEMBLING AND PREPARING 11

					Owner’s manual
Remote control,
batteries (AAA)
(See p.18)

Power Cord		AC-DC Adaptor
(Depending on model & country)
(See p. B-3)		(See p. B-3)

<![if ! IE]>

<![endif]>ENGLISH

Cable holder

(See p. A-4)

or

AC-DC Adaptor

(Depending on model) (See p. B-3)

Stand Base

(See p. A-3)

or

Isolator

(Depending on model) (See p. 12)

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

CAUTION

yy If there is a Isolator, follow as shown.

»Use this to install TV in a place where there is a voltage difference between TV set and GND of antenna signal. If there is a voltage difference between TV set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.

»You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

»Before starting, be sure that the TV antenna is connected.

Connect to TV.

Wall

ANTENNA/

or

Cable / Antenna

Isolator

Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

ASSEMBLING AND PREPARING 13

Parts and buttons

Screen

Remote Control Sensor

Speakers

<![if ! IE]>

<![endif]>ENGLISH

			Touch Buttons1
Touch Buttons			Description
	Scrolls through the saved programmes.
	Adjusts the volume level.
OK	Selects the highlighted menu option or confirms an input.
SETTINGS	Accesses the main menu, or saves your input and exits the menus.
INPUT	Changes the input source.
/ I	Turns the power on or off.

1 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yy Avoid touching the screen at all times, as this may result in damage to the screen.

yy It is recommended to move the TV in the box or packing material that the TV originally came in.

yy Before moving or lifting the TV, disconnect the power cord and all cables.

yy When holding the TV, the screen should face away from you to avoid damage.

yy When transporting a large TV, there should be at least 2 people.

yy When transporting the TV by hand, hold the TV as shown in the following illustration.

yy When transporting the TV, do not expose the TV to jolts or excessive vibration.

yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen.

yy Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING 15

Mounting on a table

1Lift and tilt the TV into its upright position on a table.

-- Leave a 10 cm (minimum) space from the wall for proper ventilation.

		10 cm
		cm
	10 cm	10
		10 cm

2Connect the AC-DC Adapter and Power Cord to a wall outlet.

CAUTION

yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a wall

(This feature is not available for all models.)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

CAUTION

yy Make sure that children do not climb on or hang on the TV.

NOTE

yy Use a platform or cabinet that is strong and large enough to support the TV securely.

yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

16 ASSEMBLING AND PREPARING

	Using the Kensington security system		Mounting on a wall
(Depending on model)

The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the TV and a table.

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.

LG recommends that wall mounting be performed by a qualified professional installer.

10 cm

10 cm

10 cm

10 cm

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard

dimensions for the wall mount kits are described in the following table.

Separate purchase(Wall Mounting Bracket)

Model	22/24/26/28/29LN45**
VESA (A x B)	100 x 100
Standard screw	M4
Number of screws	4
Wall mount bracket	LSW130B

A

B

CAUTION

yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.

yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

yy Do not over tighten the screws as this may cause damage to the TV and void your warranty.

yy Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yy Use the screws that are listed on the VESA standard screw specifications.

yy The wall mount kit includes an installation manual and necessary parts.

yy The wall mount bracket is not provided. You can obtain additional accessories from your local dealer.

yy The length of screws may differ depending on the wall mount. Make sure to use the proper length.

yy For more information, refer to the manual supplied with the wall mount.

ASSEMBLING AND PREPARING 17

<![if ! IE]>

<![endif]>ENGLISH

18 REMOTE CONTROL

<![if ! IE]>

<![endif]>ENGLISH

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.

CAUTION

yy Do not mix old and new batteries, as this may damage the remote control.

Make sure to point the remote control toward the remote control sensor on the TV.

TV /

RAD

INPUT

SUBTITLE AD/PIP

	1	2	3
	4	5	6
	7	8	9
	LIST	0	Q.VIEW
		FAV
		GUIDE
		MUTE
1	TEXT	INFO	T.OPT

TV/PC

2

Selects Radio, TV and DTV programme.

Recalls your preferred subtitle in digital mode.

AD/PIP AD : Switches the audio description on or off. /

PIP : Turns the PIP mode on or off

User Guide Sees User Guide.

Changes the input source.

Number buttons Enters numbers

Accesses the saved programme list.

Returns to the previously viewed programme.

Adjusts the volume level.

Accesses your favourite programme list.

GUIDE Shows programme guide.

MUTE Mutes all sounds.

P Scrolls through the saved programmes.

PAGE Moves to the previous or next screen.

TELETEXT buttons These buttons are used for teletext.

Views the information of the current programme and screen.

Accesses the main menus.

Accesses the Quick menus.

Navigation buttons (up/down/left/right) Scrolls through menus or options.

Selects menus or options and confirms your input.

BACK Returns to the previous level.

EXIT Clears on-screen displays and return to TV viewing.

SIMPLINK Accesses the AV devices connected with the HDMI cable through HDMI-CEC. Opens the SIMPLINK menu.

TV/PC Selects TV or PC mode.

Control buttons( ) Controls the MY MEDIA menus, or the SIMPLINK compatible devices (USB,SIMPLINK).

Coloured buttons These access special functions in some menus. ( RED GREEN YELLOW BLUE)

(Backlight) Adjusts the brightness of the screen by controlling the screen backlight.

ENTERTAINMENT 19

ENTERTAINMENT

Only LN450U model(Only UK)

Image shown may differ from your TV.

Wired Network Connection

(*Not Provided)

Internet connection

Wired router

Network setting

1Press the SETTING button to access the main menu.

2Select the NETWORK → Network Setting menu.

NETWORK

Move OK

Network Setting

Network Status

3 Select the Start Connection.

Network Setting

Connect a LAN cable to the back of TV.

Setting your network will enable network-related features on the TV.

Start Connection

Previous

Next

4The device automatically tries to connect to the network.

Network Setting

Network connecting...

Cancel

Previous

5The connected network is displayed. Select the Complete to confirm the network connection.

Network Setting

Wired network is connected.

For detailed settings, select [Set Expert].

Set Expert

Complete

Previous

NOTE

yy U.K: LAN port is available. (The LAN port is added to support HD MHEG.)

yy Other areas: LAN port is not available.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

20 USING THE USER GUIDE

USING THE USER GUIDE

User Guide allows you to more easily access the detailed TV information.

1Press SETTINGS to access the main menus.

2Press the RED button to access the Customer Support menus.

3Press the Navigation buttons to scroll to User Guide and press OK.

PICTURE	AUDIO	SETUP	TIME
LOCK	OPTION	INPUT	MY MEDIA

Press OK() to set picture settings.

Customer Support

FAQ

Exit

Software Update

Picture Test

Sound Test

Signal Test

Product/Service Info.

User Guide

Close

User Guide	2	3
		To use input device
		To set ODC (Over Driving Circuit)
PROGRAMME Setting		To use PIP (Picture In Picture)
PICTURE, SOUND Setting		To set time options
OPTION		To set TV lock options
Advanced Function		To set language
Information		To set country

1

Image shown may differ from your TV.

1Allows to select the category you want.

2Allows to select the item you want.

You can use / to move between pages.

3Allows to browse the description of the function you want from the index.

User Guide

1

PROGRAMME Setting

PICTURE, SOUND Setting

OPTION

Advanced Function

Information

OPTION > To set language

SETTING  OPTION  Language

You can select the language of the menu displayed on the screen and the digital sound broadcasting.

Menu Language : Selects a language for the display text.

Audio Language [In Digital Mode Only] : Selects the desired language when watching digital broadcasting containg several voice languages.

Subtitle Language [In Digital Mode Only] : Use the Subtitle function when two or more subtitle languages are broadcast.

If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.

2 Zoom In

Close

SETTING  OPTION  Language

You can select the language of the menu displayed on the screen and the digital sound broadcasting.

Menu Language : Selects a language for the display text.

Audio Language [In Digital Mode Only] : selects the desired language when watching digital broadcasting containg several voice languages.

Subtitle Language [In Digital Mode Only] : Use the Subtitle function when two or more subtitle languages are broadcast.

If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.

2 Zoom Out

Close

1Shows the description of the selected menu. You can use / to move between pages.

2Zooms in or out the screen.

MAINTENANCE / TROUBLESHOOTING 21

MAINTENANCE

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend the product lifespan.

CAUTION

yy Make sure to turn the power off and disconnect the power cord and all other cables first.

yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet and stand

yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION

yy Avoid touching the screen at all times, as this may result in damage to the screen.

yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions.

yy Do not use any chemicals as this may damage the product.

yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

TROUBLESHOOTING

	Problem	Solution
	Cannot control the	yy Check the remote control sensor on the product and try again.
	TV with the remote	yy Check if there is any obstacle between the product and the remote control.
	control.	yy Check if the batteries are still working and properly installed ( to , to ).
	No image display	yy Check if the product is turned on.
	and no sound is	yy Check if the power cord is connected to a wall outlet.
	produced.	yy Check if there is a problem in the wall outlet by connecting other products.
	The TV turns off	yy Check the power control settings. The power supply may be interrupted.
	suddenly.	yy Check if the Auto sleep feature is activated in the Time settings.
		yy If there is no signal while the TV is on, the TV will turn off automatically after
		15 minutes of inactivity.
	When connecting	yyTurn the TV off/on using the remote control.
	to the PC (RGB/	yyReconnect the RGB/HDMI cable.
	HDMI), ‘No signal’	yyRestart the PC with the TV on.
	or ‘Invalid Format’
	is displayed.

<![if ! IE]>

<![endif]>ENGLISH

HANDBOK

LED-TV

*LG LED-TV har en LCD-skärm med LED-belysning.

Läs den här handboken noggrant innan du använder produkten och spara den för framtida bruk.

www.lg.com

<![if ! IE]>

<![endif]>SVENSKA

2 INNEHÅLLSFÖRTECKNING

INNEHÅLLSFÖRTECKNING

3 LICENSER

3MEDDELANDE OM PROGRAMVARA FÖR ÖPPEN KÄLLKOD

3ANSLUTA EN EXTERN STYRENHET

4SÄKERHETSFÖRESKRIFTER

10 INSTALLATIONSANVISNINGAR

10 MONTERA OCH FÖRBEREDA

10 Uppackning

13Delar och knappar

14Lyfta och flytta TV:n

15Placera TV:n på ett bord

16Montering på vägg

18FJÄRRKONTROLL

19UNDERHÅLLNING

19 Ansluta till ett kabelanslutet nätverk

19Nätverksinställning

20ANVÄNDA ANVÄNDARHANDBOKEN

21SKÖTSEL

21 Rengöra TV:n

21 - Skärm, ram, skåp och stativ

21 - Strömkabel

21 FELSÖKNING

VARNING

yy Om du ignorerar varningstexten kan du råka ut för en olycka och skada dig allvarligt, t.o.m. dödligt.

SE UPP!

yy Om du ignorerar varningstexten kan du få lättare skador, eller så kan produkten skadas.

Obs!

yy Anmärkningen hjälper dig att förstå och använda produkten på ett säkert sätt. Läs anmärkningen noggrant innan du använder produkten.