LG 26LC7DUK, 26LC7D, 32LC4D User Manual

Please read this manual carefully before operating
your set.

Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.

LCD TV

OWNER’S MANUAL

LCD TV MODELS

26LC7D
32LC4D
42LC4D

www.lgusa.com / www.lg.ca

As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this
product meets the
ENERGY STAR guidelines
for energy efficiency.

ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).

LG's own special digital image generator, consisting
of a full digital image processor, six different main
picture quality factors.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

With HDMI CEC support of LG’s audio/video device
connected to the HDMI (high-definition multimedia
interface), LG TV with this logo works easily with one
remote control.

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

It has 2 HDMI ports that connect audio and video
devices with one cable and produces the highest
quality digital images and sound.

1

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

The lightning flash with arrowhead
symbol, within an equilateral triangle, is

intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral

triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the litera­ture accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.

2

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate
booklet or sheet, or be located before any operating instructions in an instruction for installation for use and
supplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
The important safety instructions shall be entitled “Important Safety Instructions”. The following safety

instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety
information may be included by adding statements after the end of the following safety instruction list. At the
manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be
placed immediately adjacent to that safety instruction:

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

Only use attachments/accessories specified by
the manufacturer.

Unplug this apparatus when unused for long
periods of time.

1

2

3

4

5

6

7

8

3

Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

Never touch this apparatus or antenna during
a thunder or lighting storm.

Do not allow a impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has exposed to rain or moisture,
does not operate normally, or has been
dropped.

CAUTION concerning the Power Cord :
Most appliances recommend they be placed
upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and
has no additional outlets or branch circuits.
Check the specification page of this owner's
manual to be certain.

Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates dam­age or deterioration, unplug it, discontinue use

of the appliance, and have the cord replaced
with an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.

Outdoor use marking :
WARNING - To reduce the risk of fire or elec-

tric shock, do not expose this appliance to rain
or moisture.

Wet Location Marking : Apparatus shall not be
exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on or over apparatus.

GGRROOUU NNDD IINNGG

Ensure that you connect the earth ground wire
to prevent possible electric shock. If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas pipes.

DDIISSCC OONNNNEECC TTII NN GG DDEEVVIICCEE FFRROOMM MMAAIINNSS

Mains plug is the disconnecting device. The
plug must remain readily operable.

Owner Ma

nual

9

12

10

11

13

14

15

16

17

Power
Supply

Short-circuit

Breaker

4

CONTENTS

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURE OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Stand Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Back Cover for Wire Arrangement

. . . . . . . . . . . . . . . . . . . . . 14

Attaching the TV to a wall

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . 16

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

WATCHING TV / CHANNEL CONTROL

Remote Control Key Functions

. . . . . . . . . . . . . . . . . . . . . . . . .

32

Turning On TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . . . 36

- Add / Delete Channel (Manual Tuning)

. . . . . .

37

- Channel Editing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38

Input List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39

SimpLink

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

Input Label

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

Key Lock

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 44

Preset Picture Settings

- Picture Mode - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

- Color Tone - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Manual Picture Adjustment

- Picture Mode - User Mode

. . . . . . . . . . . . . . . . . . . . . . . . 47

- Color Tone - User Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . 48

XD - Picture Improvement Technology

. . . . . . . . . . . . . 49

Advanced - Cinema 3:2 Pulldown Mode

. . . . . . . . . . . 50

Advanced - Black (Darkness) Level

. . . . . . . . . . . . . . . . . . . 51

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

52

SOUND & LANGUAGE CONTROL

Auto Volume Leveller (Auto Volume)

. . . . . . . . . . . . . . . . 53

Preset Sound Setting (Sound Mode)

. . . . . . . . . . . . . . . . 54

Sound Setting Adjustment - User Mode

. . . . . . . . . . .

55

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

56

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

57

Stereo/SAP Broadcasts Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . 58

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

On-Screen Menus Language Selection

. . . . . . . . . . . . . 60

Caption Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61

- Analog Broadcasting System Captions

. . . . . . .

62

- Digital Broadcasting System Captions

. . . . . . . .

63

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64

5

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

66

Auto On/Off Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

Auto Shut-off Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

PARENTAL CONTROL / RATINGS

Set Password & Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . . .

70

Channel Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

72

External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Movie & TV Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

APPENDIX

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Programming the Remote Control

. . . . . . . . . . . . . . . . . . .

80
IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

83
External Control Through RS-232C

. . . . . . . . . . . . . . . . . .

85

6

FEATURE OF THIS TV

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is noth­ing wrong with TV.

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they
have no adverse effect on the monitor's performance.

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce
some temporary distortion effects on the screen.

On Disposal

a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general household waste.
c. Disposal of this product must be carried out in accordance to the regulations of your local authority.

LG's own special digital image generator, consisting
of a full digital image processor, six different main
picture quality factors.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

With HDMI CEC support of LG’s audio/video device
connected to the HDMI (high-definition multimedia
interface), LG TV with this logo works easily with one
remote control.

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

It has 2 HDMI ports that connect audio and video
devices with one cable and produces the highest
quality digital images and sound.

PREPARATION

7

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your product. If an accessory is missing, please contact
the dealer where you purchased the product.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.

The accssories can be different from the figures shown here.

Twist Holder

Arrange the wires with the

twist holder.

OOppttiioonn EExxttrraass

FFoorr 2266//3322 iinncchheess

4-Bolts for stand assembly

(Refer to p.12)

FFoorr 2266//4422 iinncchheess

Polishing Cloth

Cable Management

2- TV Bracket Bolts

(Refer to p.15)

2- TV Brackets,

2- Wall Brackets

(Refer to p.15)

* Slightly wipe stained spot on the exterior only with the polishing

cloth for the product exterior if there is stain or fingerprint on
surface of the exterior.

* Do not wipe roughly when removing stain. Please be cautions of

that excessive pressure may cause scratch or discoloration.

D-sub 15 pin Cable

Owner's Manual

1.5V 1.5V

Owner’s Manual CD Manual

E
N

T
E

R

T
V

I
N

P
U

T

M

O
D
E

D

V
D

R
A

T
I
O

E
X

I
T

V
O

L

S
O

U
N

D

A

D
J
U

S
T

P
I
C

T
U

R
E

F
A
V

M
U

T
E

C
H

T
I
M

E

R

C
C

S

A
P

M

E
N

U

V
C

R

P
O

W
E

R

123

456

789

0

B

A
C

K

C
O

M

P
1

H

D
M

I
1

R

G
B

-
P
C

S
I
M
P

L
I
N

K

E
N

T
E

R

T
V

T
V

I
N

P
U

T

I
N

P

U
T

M

O
D

E

D

V
D

R
A

T
I
O

E
X

I
T

V
O

L

S
O

U
N
D

A

D
J
U

S
T

P

IC
T

U
R

E

F
A
V

M
U

T
E

C
H

T

I
M
E

R

C
C

S
A

P

M

E
N

U

V
C

R

P
O

W

E
R

123

456

789

0

B
A

C
K

C

O
M

P
1

H
D

M
I
1

R

G
B

­P
C

S
I
M
P

L
I
N
K

**

Remote Control,

Batteries

Power Cord

LCD TV PLASMA TV

Owner's Manual

http://www.lgusa.com

www.lg.ca

Copyright© 2007 LGE,
All Rights Reserved.

75ohm Round Cable

PREPARATION

8

FRONT PANEL INFORMATION

PREPARATION

■

Here shown may be somewhat different from your TV.

■

NOTE: If your product has a protection tape attached, remove the tape.
And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).

CHCH

VOLOL

ENTERENTER

MENUMENU

INPUTINPUT

Remote Control Sensor

Power/Standby Indicator

Illuminates red in standby mode.
When the TV is turned on, the indicator blinks green and
then illuminates green before the picture is displayed.

CHANNEL (DD,EE)Buttons

VOLUME (

FF,GG

)Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

Front Panel Controls (26 inches)

PREPARATION

9

Front Panel Controls (32/42 inches)

R

CHCH

VOLOL

ENTERENTER

MENUMENU

INPUTINPUT

Remote Control Sensor

Power/Standby Indicator

Illuminates red in standby mode.
When the TV is turned on, the indicator blinks green and
then illuminates green before the picture is displayed.

CHANNEL (DD,EE)Buttons

VOLUME (FF,GG)Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

PREPARATION

10

BACK PANEL INFORMATION

PREPARATION

■

Here shown may be somewhat different from your TV.

R

RGB IN

HDMI/DVI IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

1(DVI)

1

2

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

VIDEO

AUDIO OUT

OPTICAL

MONO

( )

AUDIO

S-VIDEO

DIGITAL

AUDIO OUT

AV IN 1

SERVICE

1

3

5

4

6

7

9

2

10

8

Back Connection Panel

AV IN 2

L/ MONO

R

AUDIO

VIDEO

S-VIDEO

12

11

PREPARATION

11

HDMI/DVI IN 1 (DVI), 2

Connect a HDMI (DVI) connection to either input.

COMPONENT IN

Connect a component video/audio device to these
jacks.

RGB (PC)

Connect the output from a PC.

AUDIO (RGB/DVI)

Connect the audio from a PC or DTV.

SERVICE

Remote Control Port

Connect a wired remote control.

ANTENNA/CABLE IN

Connect over-the air signals to this jack.
Connect cable signals to this jack.

DIGITAL AUDIO OUT

Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.

RS-232C IN (CONTROL & SERVICE) PORT

For external control devices.

AUDIO OUT

Connect analog audio to various types of equipment.

AV (Audio/Video) IN 1/2

Connect audio/video output from an external
device to these jacks.

S-VIDEO

Connect S-Video out from an S-VIDEO device.

Power Cord Socket

For operation with AC power.
Caution: Never attempt to operate the TV on DC

power.

1

11

2

3

4

5

6

8

7

9

10

PREPARATION

12

STAND INSTALLATION (Only 26/32 inches LCD TV models)

PREPARATION

Carefully place the product screen side down on
a cushioned surface that will protect product and
screen from damage.

Assemble the product stand with the product as
shown.

Securely install the 4 bolts provided.

1

2

3

■

Here shown may be somewhat different from your TV.

PREPARATION

13

VESA WALL MOUNTING

This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.

GG

Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.

NOTE

!

R

100 mm

200 mm

R

400 mm

600 mm

26/32 inches 42 inches

For proper ventilation, allow a clearance of 4inches on all four sides from the wall.

4 inches

4 inches

4 inches

4 inches

Ensure adequate ventilation by following the clearance recommendations.

CAUTION

DESKTOP PEDESTAL INSTALLATION

PREPARATION

14

BACK COVER FOR WIRE ARRANGEMENT

PREPARATION

Connect the cables as necessary.
To connect an additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT as shown.

How to remove the CABLE MANAGEMENT

GG

Hold the CABLE MANAGEMENT with both hands and
pull it backward.

CABLE MANAGEMENT

TWIST HOLDER

GG

Do not hold the CABLE MANAGEMENT when moving
the product.

- If the product is dropped, you may be injured or the
product may be broken.

NOTE

!

1

2

Bundle the cables using the supplied TWIST
HOLDER.

3

■

Here shown may be somewhat different from your TV.

PREPARATION

15

ATTACHING THE TV TO A WALL

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the TV brackets and bolts to tighten the product to the wall as shown in the picture.

* Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on

the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope (not provided as parts of the product, must pur­chase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.

PREPARATION

16

ANTENNA OR CABLE CONNECTION

PREPARATION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wa ll
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

Cable TV
Wall Jack

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze wire
when connecting the antenna.

Copper Wire

GG

The TV will let you know when the analog, cable, and digital channel scans are complete.

NOTE

!

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

Antenna

UHF

Signal
Amplifier

VHF

3. Using both cable and antenna

Cable TV
Wall Jack

Antenna

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

Diplexer

(Signal

Combiner)

■

Here shown may be somewhat different from your TV.

EXTERNAL EQUIPMENT SETUP

17

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.

When connecting Component cable

1. How to connect

Connect the video outputs (Y, P

B

, PR

)

of the digital set

top box to the

CC OOMMPPOONN EENNTT IINN VV IIDDEEOO 11

jacks on

the set. Match the jack colors
(Y = green, P

B

= blue, and PR

= red).

Connect the audio output of the digital set-top box to
the

CC OOMMPPOONN EENNTT IINN AAUU DDIIOO 11

jacks on the set.

2

1

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box. operation

)

■

Select

CC oommpp oonneenntt 11

input source by using the

IINN PPUU TT

button on the remote control.

■

If connected to

CC OOMMPPOONNEE NN TT IINN22

input, select

CC oo mmpp oo nneenntt 22

input source.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.

RGB IN

/DVI IN

AUDIO

(RGB/DVI)

RGB(PC)

REM

CONT

RS

(CONTR

( )

S-V

COMPONENT IN

1

2

VIDEO

AUDIO

Y L RPB PR

SERVICE

1

2

Signal

480i

480p

720p

10 8 0 i

10 8 0 p

Component 1/2

Yes

Yes

Yes

Yes

Yes

HDMI1/DVI,

HDMI2

No

Yes

Yes

Yes

Yes

EXTERNAL EQUIPMENT SETUP

18

RGB IN

COMPONENT IN

AUDIO

(RGB/D

RGB(PC)

1

2

VIDEO

( )

HDMI/DVI IN

1 (DVI)

2

HDMI-DTV OUTPUT

When connecting HDMI cable

Connect the digital set-top box to

HHDDMMII //DDVVII II NN 11

((DDVVII ))

or

22

jack on the set.

No separated audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select

HHDD MM II11

or

HHDD MM II22

input source by using the

IINN PPUU TT

button on the remote control.

2

1

1

GG

When connected, the TV will tell a connected device what
resolution it supports and the resolution it prefers. If the
device supports this Auto HDMI function, the player output
resolution will be automatically set to 720p.

GG

If the device does not support Auto HDMI, you need to set
the output resolution appropriately.

NOTE

!

EXTERNAL EQUIPMENT SETUP

19

When connecting HDMI to DVI cable

( )

COMPONENT IN

AV IN 1

ANTENNA/

CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

AUDIO OUT

VIDEO

MONO

( )

AUDIO

S-VIDEO

HDMI/DVI IN

1 (DVI)

2

RGB IN

AUDIO

(RGB/DVI)

L R

DVI-DTV OUTPUT

RGB(PC)

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

Connect the DVI output of the digital set-top box to the

HHDDMMII //DDVVII II NN 11 ((DDVVII ))

jack on the set.

Connect the audio output of the digital set-top box to the

AAUUDD IIOO

((

RR GGBB //DDVVII

))

jack on the set.

1. How to connect

■

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

■

Select

HHDD MM II11

input source by using the

IINN PPUU TT

button on the remote control.

2. How to use

2

1

1

2

EXTERNAL EQUIPMENT SETUP

20

DVD SETUP

EXTERNAL EQUIPMENT SETUP

When connecting Component cable

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPBP

R

Video output ports

on DVD player

Y

Y

Y

Y

P

B

B-Y

Cb

Pb

P

R

R-Y

Cr

Pr

Connect the video outputs (Y, P

B, P

R

)

of the DVD to the

CC OOMMPPOONN EENNTT IINN VVIIDDEEOO11

jacks on the set.

Match the jack colors
(

Y = green, P

B = blue, and P

R = red

)

.

Connect the audio outputs of the DVD to the
CC OOMMPPOONN EENNTT IINN AAUU DDIIOO 11

jacks on the set.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select

CC oo mmpp oo nneenntt 11

input source by using the

IINN PPUU TT

button on the remote control.

■

If connected to

CC OOMMPPOONNEE NN TT IINN 22

input, select

CC oo mmpp oo nneenntt 22

input source.

■

Refer to the DVD player's manual for operating instructions.

2

1

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

REM

CONT

RS

(CONTR

( )

S-VI

COMPONENT IN

1

2

VIDEO

AUDIO

Y L RPB PR

SERVICE

1 2

EXTERNAL EQUIPMENT SETUP

21

When connecting with an S-Video cable

Connect the S-VIDEO output of the DVD to the
SS --VVIIDDEEOO

input on the set.

Connect the audio outputs of the DVD to the

AA UUDD IIOO

input jacks on the set.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select

AA VV 11

input source by using the

IINN PPUU TT

button on the

remote control.

■

If connected to

AAVV II NN 22

, select

AA VV 22

input source.

■

Refer to the DVD player's manual for operating instructions.

When connecting HDMI cable

Connect the HDMI output of the DVD to the
HHDDMMII //DDVVII II NN 11 ((DDVVII ))

or 22jack on the set.

No separated audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select

HHDD MM II11

or

HHDD MM II22

input source by using the

IINN PPUU TT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

2

1

2

1

(

)

N

IO

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

MONO

( )

AUDIO

S-VIDEO

AV IN 1

VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO

AUDIO

1

2

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI

RGB(PC)

1

2

VIDEO

A

( )

HDMI/DVI IN

1 (DVI)

2

HDMI-DVD OUTPUT

1

GG

When connected, the TV will tell a connected device what
resolution it supports and the resolution it prefers. If the
device supports this Auto HDMI function, the player out­put resolution will be automatically set to 720p.

GG

If the device does not support Auto HDMI, you need to
set the output resolution appropriately.

To get the best picture quality, adjust the output resolution
of the DVD to 720p.

NOTE

!

EXTERNAL EQUIPMENT SETUP

22

VCR SETUP

EXTERNAL EQUIPMENT SETUP

When connecting with an antenna

■

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■

Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long peri­od of time (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the
screen may remain visible on the screen. This phenomenon is common to all manufactures and in conse­quence the manufactures warranty does not cover the product bearing this phenomenon.

Connect the RF antenna out socket of the VCR to the

AANN TTEENNNNAA// CCAABBLL EE IINN

socket on the set.

Connect the antenna cable to the RF antenna in socket of the VCR.

1. How to connect

■

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

2. How to use

2

1

L R

S-VIDEO VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

MPONENT IN

AV IN 1

AUDIO

(RGB/DVI)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

VIDEO

MONO

( )

AUDIO

S-VIDEO

( )

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

Wall Jack

Antenna

1

2

EXTERNAL EQUIPMENT SETUP

23

GG

Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.

CAUTION

When connecting with a RCA cable

GG

The picture quality is improved: compared to normal
composite (RCA cable) input.

NOTE

!

Connect the

AA UUDD IIOO/VV IIDDEEOO

jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.

)

■

Select

AA VV 11

input source by using the

IINN PPUU TT

button on

the remote control.

■

If connected to

AAVV II NN 22

, select

AA VV 22

input source.

When connecting with an S-Video cable

Connect the S-VIDEO output of the VCR to the
SS --VVIIDDEEOO

input on the set.

Connect the audio outputs of the VCR to the

AA UUDD IIOO

input jacks on the set.

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR.
(

Refer to the VCR owner’s manual.

)

■

Select

AA VV 11

input source by using the

IINN PPUU TT

button on the

remote control.

■

If connected to

AAVV II NN 22

, select

AA VV 22

input source.

1

2

1

GG

If you have a mono VCR, connect the audio cable from the VCR to the

AA UUDD IIOO

LL//MMOONNOO

jack of the set.

NOTE

!

B/DVI)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

AV IN 1

VIDEO

MONO

( )

AUDIO

S-VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

1

( )

(

)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

AV IN 1

VIDEO

MONO

( )

AUDIO

S-VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

1

2

EXTERNAL EQUIPMENT SETUP

24

OTHER A/V SOURCE SETUP

EXTERNAL EQUIPMENT SETUP

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

L R

VIDEO

Camcorder

Video Game Set

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks
between TV and external equipment.
Match the jack colors

.

(

Video = yellow, Audio Left = white, and

Audio Right = red

)

1. How to connect

2. How to use

■

Select

AA VV 22

input source by using the

IINN PPUU TT

button on the remote control.

■

If connected to

AAVV II NN 11

input, select

AA VV 11

input source.

■

Operate the corresponding external equipment.

1

ex) LCD TV Model

1

EXTERNAL EQUIPMENT SETUP

25

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

When connecting D-sub 15 pin cable

Connect the RGB output of the PC to the

RR GGBB

((

PP CC

))

jack on the set.

Connect the PC audio output to the

AA UUDD IIOO

((

RR GGBB //DDVVII

))

jack on the set.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select

RR GGBB --PP CC

input source by using the

IINN PPUU TT

button

on the remote control.

2

1

COMPONENT IN

1

2

(CO

VIDEO

AUDIO

( )

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

L R

RGB OUTPUT

CO

SERVICE

1

2

EXTERNAL EQUIPMENT SETUP

26

EXTERNAL EQUIPMENT SETUP

When connecting HDMI to DVI cable

Connect the DVI output of the PC to the

HHDDMMII //DDVVII II NN 11 ((DDVVII ))

jack on the set.

Connect the PC audio output to the

AAUUDDIIOO ((RRGGBB//DDVVII

))

jack on the set.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select

HHDDMMII11

input source by using the

IINN PPUU TT

button on the remote control.

2

1

COMPONENT IN

AV IN 1

CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

AUDIO OUT

VIDEO

MONO

( )

AUDIO

S-VIDEO

HDMI/DVI IN

1 (DVI)

2

RGB IN

AUDIO

(RGB/DVI)

L R

DVI-PC OUTPUT

RGB(PC)

( )

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

1

2

GG

If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.

GG

If the PC does not support Auto DVI, you need to set the output resolution appropriately.

NOTE

!

EXTERNAL EQUIPMENT SETUP

27

GG

To get the the best picture quality, adjust the PC
graphics card to 1920x1080, 60Hz.

GG

Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.

GG

Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC output to another resolu­tion, change the refresh rate to another rate or
adjust the brightness and contrast on the VIDEO
menu until the picture is clear. If the refresh rate of
the PC graphic card can not be changed, change

the PC graphic card or consult the manufacturer of
the PC graphic card.

GG

Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.

GG

The synchronization input form for Horizontal and
Vertical frequencies is separate.

NOTES

!

RGB-PC, HDMI1/DVI-PC mode

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.469 70.08

31.469 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47.776 59.87

47.720 59.799

47.130 59.65

Resolution

720x400

1360x768

640x350

* RGB-PC mode only: 640x350, 720X400

640x480

800x600

1024x768

HDMI1/DVI-DTV, HDMI2-DTV mode

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.47 59.94

31.47 60.00

44.960 59.94

45.000 60.00

33.720 59.94

33.750 60.00

26.97 23.94

27.000 24.00

33.71 29.97

33.750 30.00

67.432 59.939

67.500 60.00

Resolution

720x480

1280x720

1920x1080i

1920x1080p

1280x768

1366x768

Supported Display Specifications