LG 25BL56WY User Guide

* LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

25BL56WY

OWNER’S MANUAL

LED LCD MONITOR

(LED Monitor*)

www.lg.com

TABLE OF CONTENTS

ENGLISH

LICENSE ...................................................... 2

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

OPEN SOURCE SOFTWARE NOTICE

INFORMATION ............................................ 3

ASSEMBLING AND PREPARING .................. 3

USING THE MONITOR ................................10

CUSTOMIZING SETTINGS .......................... 12

TROUBLESHOOTING .................................19

PRODUCT SPECIFICATION ......................... 21

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

OPEN SOURCE SOFTWARE NOTICE INFORMA TION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

ASSEMBLING AND PREPARING

CAUTION

• Always use genuine LG components to ensure safety and product per formance.

• The product warranty will not cover damage or injury caused by the use of unauthorized components.

• It is recommended that use the supplied components.

• If you use generic cables not certified by LG, the screen may not display or there may be image noises.

• Illustrations in this document represent typical procedures, so they may look different from the actual product.

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing

so may damage the product.)

• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this

way will not be covered by the product warranty.

• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand

and could result in personal injury.

• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen

may cause damage to it.

NOTE

• The components may look different from those illustrated here.

• Without prior notice, all product information and specifications contained in this manual are subject to change

to improve the performance of the product.

• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer

from which you purchased the product.

• The power cord provided may differ depending upon the region.

Supported Drivers and Software

You can download and install the latest version from the LGE website (

Drivers and Software Installation Priority

Monitor Driver Recommended

OnScreen Control Recommended

Dual Controller Optional

www.lg.com

ENGLISH

Product and Button Description

ENGLISH

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.

• Place the monitor in the original box or packing material before attempting to move it.

• Before moving or lifting the monitor, disconnect the power cord and all other cables.

• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

• When holding the monitor, the screen should face away from you to prevent it from being scratched.

• When transporting the monitor, do not expose the monitor to shock or excessive vibration.

• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

Power Indicator

• Lighting On : Turned on

• Lighting Off : Turned off

(Power Button)

Button

CAUTION

• Avoid touching the monitor screen as much as possible.

- This may result in damage to the screen or some of the pixels used to create images.

• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become

unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

Installing on a Table

• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from

the wall to ensure sufficient ventilation.

Adjusting the Stand Height

1 Place the monitor mounted on the stand base in an upright position. 2 Handle the monitor with both hands for safety.

ENGLISH

100 mm

CAUTION

• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.

• Make sure to use the power cord that is provided in the product package and connect it to a grounded power

outlet.

• If you need another power cord, please contact your local dealer or the nearest retail store.

Max. 130.0 mm

WARNING

• When adjusting the screen height, do not place your hand on the stand body to avoid injur y to your fingers.

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfor table viewing experience.

WARNING

• To avoid injur y to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as

illustrated below.

• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Pivot Feature

The pivot feature allows the monitor to rotate 90° clockwise and -90° counter clockwise.

1 Raise the monitor to the maximum height.

ENGLISH

4 Complete the installation by rotating the monitor 90° clockwise and -90° counter clockwise as shown

below.

2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.

3 Rotate the monitor 90° clockwise and -90° counter clockwise as shown in the figure.

NOTE

• Auto Pivot feature of the display is not supported.

• The screen can be rotated easily using the screenpivot shortcut key provided with your Windows operating

system. Note that some Windows versions and some graphics card drivers may use different settings for the screen pivot key or may not support the pivot key at all.

• Windows screen pivot shortcut keys

- 0°: Ctrl + Alt + Up arrow key (↑)

- 90°: Ctrl + Alt + Left arrow key (←)

- 180°: Ctrl + Alt + Down arrow key (↓)

- 270°: Ctrl + Alt + Right arrow key (→)

Head Head

Stand Stand

WARNING

• To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the

stand does not make contact with the monitor.

Swivel stand

• Image shown may differ from your Monitor set.

1 Swivel 355 degrees and adjust the angle of the Monitor set to suit your view.

Using the cable holder

Arrange the cables using the cable holder as shown in the illustration.

ENGLISH

cable holder

Using the Kensington Lock

The Kensington security system connector is located at the back of the Monitor set. For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website

at http://www.kensington.com.

ENGLISH

Connect the monitor to a table using the Kensington security system cable.

Installing the Wall Mount Plate

This monitor meets the specifications for the wall mount plate or other compatible devices.

NOTE

• The wall mount plate is sold separately.

• For more information on installation, refer to the wall mount plate’s installation guide.

• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the

screen.

• Remove the stand before installing the monitor on a wall mount by performing the stand attachment in

reverse.

Installing on the Wall

Install the monitor at least 100mm away from the wall and leave about 100mm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

100 mm

NOTE

• The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

• The left or right side of the monitor head can be slightly rotated up or down (up to 3°). Adjust the horizontal

level of the monitor head.

Monitor head

100 mm

+ 17 hidden pages