LG 24MN43D-PH Owner’s Manual

ENGLISH

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your TV and retain it for future reference.

22MN43D 24MN43D

www.lg.com

ENGLISH

TABLE OF CONTENTS

3 LICENSES

4 INSTALLATION PROCEDURE

5 ASSEMBLING AND PREPARING

5 Unpacking 7 Parts and buttons 9 Lifting and moving the TV 10 Setting up the TV 10 - Attaching the Stand 12 - Mounting on a table 13 - Tidying cables 13 - Using the Kensington security system 14 - Detaching the Stand 15 - Mounting on a wall

17 WATCHING TV

31 CUSTOMIZING SETTINGS

31 Accessing main menus

32 USING THE USER GUIDE

32 Accessing User Guide menu. 32 - Using the TV menu 32 - Using the Remote Control

33 MAINTENANCE

33 Cleaning Your TV 33 Screen and frame 33 Cabinet and stand 33 Power cord 34 Preventing “Image burn” or “Burn-in” on

your TV screen

35 TROUBLESHOOTING

17 Turning the TV on for the first time

19 MAKING CONNECTIONS

19 Connecting to an antenna or cable 20 Connecting to a HD receiver, DVD, VCR

player or Gaming device 20 - HDMI connection 21 - HDMI to DVI connection 22 - Component connection 23 - Composite connection 24 Connecting to a USB 25 Connecting to a PC 26 - HDMI connection 27 - HDMI to DVI connection 28 - RGB connection

29 REMOTE CONTROL

35 General

36 SPECIFICATIONS

40 KEY CODES

41 EXTERNAL CONTROL DEVICE

SETUP

41 USB to Serial converter with USB Cable 42 RS-232C with RS-232C Cable (Legacy) 42 - Customer Computer 42 - RS-232C configurations 43 Communication Parameters 43 Command reference list 44 Transmission / Receiving Protocol

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

ENGLISH

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274

INSTALLATION PROCEDURE

ENGLISH

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

Attach the stand to the TV.

Connect an external device to the TV.

NOTE

Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.



The available menus and options may differ from the input source or product model that you are



using. New features may be added to this TV in the future.



ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

NOTE

The accessories supplied with your product may vary depending on the model.



Product specifications or contents in this manual may be changed without prior notice due to



upgrade of product functions.

CAUTION

Do not use any pirated items to ensure the safety and product life span.



Any damages or injuries by using pirated items are not covered by the warranty.



NOTE

The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to



upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick



and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

ENGLISH

*A 10 mm *B 18 mm

ENGLISH

ASSEMBLING AND PREPARING

Remote control Batteries (AAA)

(See p.29, See p.30)

Stand Body

(See p.10, See p. 14)

Cards

Cable Tie

(See p.13)

Stand BaseCD (Owner's Manual)

(See p.10, See p. 14)

Power Cord

(See p.12)

AC-DC Adapter

(See p.12)

Parts and buttons

ASSEMBLING AND PREPARING

Remote Control Sensor

ENGLISH

Standby Light

Lighting On:



When Power is turned off

Lighting Off:



When Power is turned on

Touch Buttons

Touch button Description

Scrolls through the saved programmes.

Adjusts the volume level.

OK Selects the highlighted menu option or confirms an input.

SETTINGS Accesses the main menus, or saves your input and exits the menus.

INPUT Changes the input source.

/ I

Turns the power on or off.

NOTE

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

ENGLISH

ASSEMBLING AND PREPARING

AV IN

(MONO)

(PC)

RS-232C IN

(CONTROL & SERVICE)

Connection panel (See p.19)

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size.

CAUTION

Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images.

It is recommended to move the TV in the



box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect



the power cord and all cables. Hold the top and bottom of the TV frame



firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING

When holding the TV, the screen should face



away from you to prevent the screen from scratches.

When transporting the TV, do not expose the



TV to jolts or excessive vibration. When transporting the TV, keep the TV



upright, never turn the TV on its side, or tilt towards the left or right.

ENGLISH

Setting up the TV

ENGLISH

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

ASSEMBLING AND PREPARING

Place the TV with the screen side down on a

flat and cushioned surface.

Attach the Stand Base from the Stand Body by

turning the screw to the right with a Coin.

CAUTION

Lay a foam mat or soft protective cloth



on the surface to protect the screen from damage. When attaching the stand to the TV,



place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Attach the Stand Body from the TV.

CAUTION

Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.

CAUTION

Do not carry the monitor upside-down



as this may cause it to fall off its stand, resulting in damage or injury.

The illustration shows a general example of



installation and may look different from the actual product.

ASSEMBLING AND PREPARING

ENGLISH

Do not carry the monitor upside-down by



holding the stand body as this may cause it to fall off, resulting in damage or injury. The illustration shows a general example of



installation and may look different from the actual product.

Mounting on a table

ENGLISH

ASSEMBLING AND PREPARING

Lift and tilt the TV into its upright position on a

table.

Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm

Connect the AC-DC Adapter and Power Cord

to a wall outlet.

10 cm

WARNING

When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers.

CAUTION

Do not place the TV near or on sources of heat, as this may result in fire or other damage.

CAUTION

Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may

occur.

ASSEMBLING AND PREPARING

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the TV to suit your view.

+20-5

Front Rear

Using the Kensington security system

The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit

http://www.kensington.com

Connect the Kensington security system cable between the TV and a table.

ENGLISH

Tidying cables

Gather and bind the cables with the supplied cable tie.

NOTE

The Kensington security system is optional. You can obtain additional accessories from most electronics stores.

Detaching the Stand

ENGLISH

ASSEMBLING AND PREPARING

Place the TV with the screen side down on a

flat and cushioned surface.

CAUTION

Pull out the Stand Body from the TV.

Lay a foam mat or soft protective cloth



on the surface to protect the screen from damage. When detaching the stand to the TV,



place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Turn the screw to the left, and then pull out the

Stand Base from the Stand Body.

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

ASSEMBLING AND PREPARING

Please use VESA standard as below.

784.8 mm (30.9 inch) and under



* Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

787.4 mm (31.0 inch) and above



* Please use VESA standard wall mount pad

and screws.

VESA (A x B) 100 x 100 Standard screw M4 Number of screws 4 Wall mount bracket

(optional)

RW120

ENGLISH

10 cm

If you intend to mount the TV to a wall, attach Wall mounting interface (optional parts) to the back of the TV. When you install the TV using the wall mounting interface (optional parts), attach it carefully so it will not drop.

Please, Use the screw and wall mount interface

in accordance with VESA Standards.

If you use screw longer than standard, the TV

might be damaged internally.

If you use improper screw, the product might

be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

10 cm

VESA (A x B)



VESA compatible only with respect to screw

mounting interface dimensions and mounting screw specifications.

ENGLISH

ASSEMBLING AND PREPARING

CAUTION

Disconnect the power cord first, and then



move or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted



wall, it may fall and result in severe injury. Use an authorized LG wall mount and



contact the local dealer or qualified personnel. Do not over tighten the screws as this may



cause damage to the TV and void your warranty. Use the screws and wall mounts that meet



the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

Use the screws that are listed on the VESA



standard screw specifications. The wall mount kit includes an installation



manual and necessary parts. The wall mount bracket is optional. You can



obtain additional accessories from your local dealer. The length of screws may differ depending



on the wall mount. Be sure to use the proper length. For more information, refer to the instructions



supplied with the wall mount.

+ 36 hidden pages