* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV and retain
it for future reference.
22MA33A22MA33B
24MN33A24MN33B
26MA33A28MN30A
29MN33A
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3 LICENSES
4 INSTALLATION PROCEDURE
5 ASSEMBLING AND PREPARING
5 Unpacking
7 Parts and buttons
10 Lifting and moving the TV
11 Setting up the TV
11 - Attaching the Stand Base
11 - Detaching the Stand Base
13 - Mounting on a table
14 - Using the Kensington security system
14 - Tidying cables
14 - Mounting on a wall
16 MAKING CONNECTIONS
16 Connecting an antenna
17 Connecting to a HD receiver, DVD, VCR
17 - HDMI connection
18 - Composite connection
19 Connecting to a USB
20 Connecting to a PC
20 - RGB connection
21 Audio System connection
21 - External Stereo Connection
player or Gaming device
27 ENTERTAINMENT
27 Connecting USB storage devices
28 Browsing files
29 Viewing photos
30 Listening to music
31 Viewing movies
33 DivX® VOD Guide
40 - Page selection
40 - Programming a colour button in LIST
mode
40 Fastext
40 - Page selection
40 Special Teletext Function
22 REMOTE CONTROL
23 WATCHING TV
23 Turning the TV on for the first time
23 Watching TV
23 Managing programmes
23 - Automatically setting up programme
24 - Manually setting up programme
25 - Editing your programme list
25 - Selecting a programme on the programme
list
25 Using additional options
25 - Adjusting aspect ratio
26 - Using the input list
41 MAINTENANCE
41 Cleaning Your TV
41 Screen and frame
41 Cabinet and stand
41 Power cord
42 TROUBLESHOOTING
42 General
43 SPECIFICATIONS
LICENSES
3
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software tools to convert your files into
DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
ENGLISH
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710;
7,519,274
4
INSTALLATION PROCEDURE
ENGLISH
INSTALLATION PROCEDURE
1
2
3
Open the package and make sure all the accessories are included.
Attach the stand to the TV.
Connect an external device to the TV.
NOTE
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y
The available menus and options may differ from the input source or product model that you are using.
y
New features may be added to this TV in the future.
y
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product. The illustrations in this manual may differ from the actual product and accessories.
NOTE
The accessories supplied with your product may vary depending on the model.
y
Product specifications or contents in this manual may be changed without prior notice due to upgrade of
y
product functions.
CAUTION
Do not use any pirated items to ensure the safety and product life span.
y
Any damages or injuries by using pirated items are not covered by the warranty.
y
NOTE
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to upgrade of product
y
functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm
y
width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your
TV’s USB port.
ENGLISH
B
A
B
*A 10 mm
*B
18 mm
A
6
ENGLISH
ASSEMBLING AND PREPARING
Remote control /
Batteries (AAA)
(See p.22)(See p.11)
CD (Owner's Manual) /
Cards
Stand Base
or
Power CordAC-DC Adapter
(Depending on the country)
(See p.13)(See p.13)(See p.13)
AC-DC Adapter
(Depending on the country)
D-SUB Cable
(Depending on the country)
(See p.20)
Cable Tie
(See p.14)
ASSEMBLING AND PREPARING
7
Parts and buttons
22MA33A 24MN33A 26MA33A 29MN33A
USB IN
5 V 0.5 A
HDMI IN
RGB IN (PC)
OK
SETTINGS
(Depending on the country)
Remote Control
Sensor
Standby Light
Lighting On: Turned off
y
Lighting Off: Turned on
y
INPUT
Touch Buttons
ENGLISH
DC-IN
(19 V )
VIDEO
L/MONO
AV IN
AUDIO
L
R
AUDIO OUT
R
Connection panel (See p.16)
Touch buttonDescription
Scrolls through the saved programmes.
Adjusts the volume level.
OKSelects the highlighted menu option or confirms an input.
SETTINGSAccesses the main menus, or saves your input and exits the menus.
INPUTChanges the input source.
/ I
Turns the power on or off.
NOTE
All of the bottoms are touch sensitive and can be operated through simple touch with your finger.
8
ASSEMBLING AND PREPARING
ENGLISH
22MA33B 24MN33B
Remote Control
Sensor
Standby Light
Lighting On :
y
When Power is turned off
Lighting Off :
y
When Power is turned on
OK
SETTINGS
INPUT
Touch Buttons
DC-IN
(19 V )
HDMI IN
VIDEO
RGB IN (PC)
L/MONO
AUDIO
AV IN
R
L
AUDIO OUT
R
(Depending on the country)
Connection panel (See p.16)
Touch buttonDescription
Scrolls through the saved programmes.
Adjusts the volume level.
OKSelects the highlighted menu option or confirms an input.
SETTINGSAccesses the main menus, or saves your input and exits the menus.
INPUTChanges the input source.
/ I
Turns the power on or off.
NOTE
All of the bottoms are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING
9
28MN30A
OK
SETTINGS
Standby Light
INPUT
Remote Control Sensor
Lighting On :
y
When Power is turned off
Lighting Off :
y
When Power is turned on
ENGLISH
Touch Buttons
DC-IN
(19 V )
HDMI IN
VIDEO
RGB IN (PC)
L/MONO
AUDIO
AV IN
R
L
AUDIO OUT
R
(Depending on the country)
Connection panel (See p.16)
Touch buttonDescription
Scrolls through the saved programmes.
Adjusts the volume level.
OKSelects the highlighted menu option or confirms an input.
SETTINGSAccesses the main menus, or saves your input and exits the menus.
INPUTChanges the input source.
/ I
Turns the power on or off.
NOTE
All of the bottoms are touch sensitive and can be operated through simple touch with your finger.
10
ASSEMBLING AND PREPARING
ENGLISH
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged and for
save transportation regardless of its type and size.
CAUTION
Avoid touching the screen at all times, as this may
result in damage to the screen or some of the
pixels used to create images.
It is recommended to move the TV in the box or
y
packing material that the TV originally came in.
Before moving or lifting the TV, disconnect the
y
power cord and all cables.
Hold the top and bottom of the TV frame firmly.
y
Make sure not to hold the transparent part,
speaker, or speaker grill area.
When holding the TV, the screen should face
y
away from you to prevent the screen from
scratches.
When transporting the TV, do not expose the TV
y
to jolts or excessive vibration.
When transporting the TV, keep the TV upright,
y
never turn the TV on its side, or tilt towards the
left or right.
ASSEMBLING AND PREPARING
11
Setting up the TV
Image shown may differ from your TV.
Attaching the Stand BaseDetaching the Stand Base
1
Stand Base
1
Stand Base
NOTE
When Detaching the stand from TV, Detach the
y
stand with lifting up the lever in the direction of the
arrow.
ENGLISH
2
CAUTION
Lay a foam mat or soft protective cloth on the
y
surface to protect the screen from damage.
When attaching the stand to the TV set, place the
y
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
2
CAUTION
Lay a foam mat or soft protective cloth on the
y
surface to protect the screen from damage.
When Detaching the stand to the TV set, place the
y
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
12
ASSEMBLING AND PREPARING
ENGLISH
CAUTION
Do not carry the TV upside-down as this may
y
cause it to fall off its stand, resulting in damage or
injury.
The illustration shows a general example of
y
installation and may look different from the actual
product.
ASSEMBLING AND PREPARING
13
Mounting on a table
Lift and tilt the TV into its upright position on a
1
table.
Leave a 10 cm (4 inches) (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Connect the AC-DC Adapter and Power Cord
2
to a wall outlet.
or
ENGLISH
CAUTION
Disconnect the power cord first, and then move or
install the TV. Otherwise electric shock may occur.
CAUTION
Do not place the TV near or on sources of heat, as
this may result in fire or other damage.
14
ASSEMBLING AND PREPARING
ENGLISH
Using the Kensington security
system
The Kensington security system connector is located
at the back of the TV. For more information of
installation and using, refer to the manual supplied
with the Kensington security system or visit
kensington.com
Connect the Kensington security system cable between
the TV and a table.
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed installation
instructions are available from your dealer, see the
.
http://www.
optional Tilt Wall Mounting Bracket Installation and Setup
Guide.
10 cm
10 cm
10 cm
10 cm
NOTE
The Kensington security system is optional. You can
obtain additional accessories from most electronics
stores.
Tidying cables
Gather and bind the cables with the supplied cable tie.
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of the TV.
When you install the TV using the wall mounting interface
(optional parts), attach it carefully so it will not drop.
Please, Use the screw and wall mount interface
1
in accordance with VESA Standards.
If you use screw longer than standard, the TV
2
might be damaged internally.
If you use improper screw, the product might
3
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
VESA compatible only with respect to screw
4
mounting interface dimensions and mounting
screw specifications.
ASSEMBLING AND PREPARING
A
B
15
Please use VESA standard as below.
5
784.8 mm (30.9 inch) and under
y
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
787.4 mm (31.0 inch) and above
y
* Please use VESA standard wall mount pad and
screws.
VESA (A x B)100 x 100
Standard screwM4
Number of screws4
Wall mount bracket
(optional)
VESA (A x B)
y
RW120
CAUTION
Disconnect the power cord first, and then move or
y
install the TV. Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall, it
y
may fall and result in severe injury.
Use an authorized LG wall mount and contact the
y
local dealer or qualified personnel.
Do not over tighten the screws as this may cause
y
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
y
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
ENGLISH
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation manual
y
and necessary parts.
The wall mount bracket is optional. You can obtain
y
additional accessories from your local dealer.
The length of screws may differ depending on the
y
wall mount. Be sure to use the proper length.
For more information, refer to the instructions
y
supplied with the wall mount.
16
MAKING CONNECTIONS
ENGLISH
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more information
about an external device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, camcorders
or cameras, gaming devices, and other external devices.
Connecting an antenna
Connect an antenna, cable or cable box to watch TV referring to the following. The illustrations may differ from the actual
accessories and an RF cable is optional.
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the
y
TV through a DVD recorder or VCR. For more information about recording, refer to the manual supplied with the
connected device.
The external device connection may differ from the model.
y
Connect external devices to the TV regardless of the order of the TV port.
y
Wall Antenna Socket
NOTE
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
y
amplifier properly to improve the image quality.
If the image quality is poor with an antenna
y
connected, aim the antenna to the proper
direction.
Visit
http://AntennaWeb.org
y
about the antenna and cable connection.
for more information
(Depending on the country)
(Not Provided)
Outdoor Antenna
yy
CAUTION
Make sure not to bend the copper wire of the RF
y
cable.
Copper wire
Complete all connections instructions between
y
devices, and then connect the power cord to the
power outlet to prevent damages to your TV.
VHF Antenna
UHF Antenna
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.