<![endif]>ENGLISH
IPS LED MONITOR
Please read this manual carefully before operating your set and retain it for future reference.
IPS LED MONITOR MODEL
24MB56HQ
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
3 |
LICENSE |
21 |
-SUPER ENERGY SAVING |
||
|
|
22 |
-Picture Mode |
||
4 |
ASSEMBLING AND PREPAR- |
23 |
-SUPER RESOLUTION + |
||
24 |
-DUAL DISPLAY |
||||
|
ING |
24 |
-DUAL WEB |
||
4 |
Unpacking |
|
25 TROUBLESHOOTING |
||
5 |
Parts and buttons |
|
|||
6 |
Moving and Lifting the Monitor |
|
|
|
|
27 |
24MB56HQ |
||||
7 |
Setting up the Monitor set |
||||
28 |
Preset Modes (Resolution) |
||||
7 |
- Attaching the Stand Base |
||||
28 |
Indicator |
||||
7 |
- Detaching the stand base |
||||
|
|
|
|||
8 |
- Mounting on a table |
|
29 PROPER POSTURE |
||
8 |
- Using the cable holder |
|
|||
9 |
- Adjusting the stand height |
29 |
Proper posture for using the Monitor set. |
||
10 |
- Swivel stand |
|
|
|
10- Detaching the stand body
11- Mounting on a wall
12USING THE MONITOR SET
12Connecting to a PC
12- D-SUB connection
12- HDMI connection
13Connecting to AV Devices
13- HDMI connection
13Connecting to External Devices
13- Peripheral device connection
14CUSTOMIZING SETTINGS
15Customizing Settings
15- Menu Settings
16-Picture
17-Color
18-Display
18-Audio
19-Others
20READER Setting
21FUNC. Setting
LICENSE 3
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
<![endif]>ENGLISH
4 ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
CD(Owner's Manual) / |
D-SUB Cable |
|
(This cable is not included in all |
||
Card |
||
countries.) |
||
|
Power Cord |
AC-DC Adapter |
( Depending on the country )
HDMI Cable
(This cable is not included in all countries.)
or
AC-DC Adapter
( Depending on the country )
Stand Base |
One Screw |
Cable Holder |
CAUTION
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
ASSEMBLING AND PREPARING 5
<![endif]>ENGLISH
Power Indicator yyLighting On: Turned on yyLighting Off: Turned off
(Power Button)
Button (See p.14)
DC-IN |
HDMI IN |
H/P |
D-SUB IN |
19 |
Connection panel (See p.12 ~13)
<![endif]>ENGLISH
6 ASSEMBLING AND PREPARING
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.
yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.
yyBefore moving or lifting the monitor, disconnect the power cord and all cables.
yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself.
yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.
yyWhen moving the monitor, avoid any strong shock or vibrations to the product.
yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.
CAUTION
yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING 7
1Place the Monitor set with the screen side down on a flat and cushioned surface.
CAUTION
yyTo protect the screen from scratches, cover the surface with a soft cloth.
2Check the position (at the front and rear) of the stand body, then mount the stand base on the stand body as shown in the figure.
Stand Body
Stand Base
3Using a coin, turn the screw clockwise to secure the stand base.
1Place the monitor's screen face down.
To protect the screen from scratches, cover the surface with a soft cloth.
2Using a coin, turn the screw in the stand base counterclockwise. Detach the stand base from the stand body.
Stand Body
Stand Base
CAUTION
yyThe components appearing in the illustrations may look different from the actual product.
yyDo not carry the monitor upside-down as this may cause it to fall off its stand, resulting in damage or injury.
yyTo avoid damaging the screen when lifting or moving the monitor, only hold the stand or the plastic cover. This avoids putting unnecessary pressure on the screen.
yyOnly remove the tape and the locking pin when the monitor is mounted on the stand base and is in an upright position. Otherwise, the stand body may protrude, which may lead to injury.
<![endif]>ENGLISH
Stand Base
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
1Lift and tilt the Monitor set into its upright position on a table.
Leave a 10 cm (minimum) space from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
3Press (Power) button on the bottom switch panel to turn the power on.
CAUTION
Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
1Fix the Knob (Cable holder) to the Hole(Hingebody).
2Use one screw to fix the Cable Holder and monitor set.
3Close the Cable holder.
2Connect the AC-DC Adapter and Power Cord to a wall outlet.
DC-IN
19
or
DC-IN
19
|
ASSEMBLING AND PREPARING 9 |
|
WARNING |
Adjusting the stand height |
|
yyTo avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor's frame as illustrated below.
Do not touch or press the screen when adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.
NOTE
Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.
1Place the monitor mounted on the stand base in an upright position.
2Remove the tape attached at the bottom rear of the stand body, then pull out the locking pin.
Stand Body
Tape
Locking Pin
3 The height can be adjusted up to 110 mm.
110.0mm
CAUTION
yyOnce the pin is removed, it is not necessary to re-insert it to adjust the height.
WARNING
yyDo not put your finger between the screen and the base (chassis) when adjusting the screen's height.
<![endif]>ENGLISH
Front |
Rear |