Please read this manual carefully before operating your TV
and retain it for future reference.
LY33**
LY34**
LY54**
LW33**
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
ENG
2 TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE INFORMATION
4 ASSEMBLING AND PREPARING
4 Unpacking
6 Separate Purchase
7 Parts and Button
8 - Using the Joystick button
9 Lifting and Moving the TV
10 Setting up the TV
10 - Attaching the stand
13 Mounting on a table
16 Mounting on a wall
18 Tidying cables
D-Sub 9-Pin Male
43 RS-232C Configurations
44 Communication Parameters
44 Command Reference List
45 Transmission / Receiving Protocol
WARNING
yIf you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yIf you ignore the caution message, you
may be slightly injured or the product
may be damaged.
33 MAINTENANCE
33 Cleaning your TV
33 - Screen, frame, cabinet and stand
33 - Power cord
34 TROUBLESHOOTING
NOTE
yThe note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION
3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays
DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC
and are used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others
available at [www.divx.com/patents].
ENGENGLISH
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
4
<
=
<
=
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you
are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
A
yUse a certified cable with the HDMI logo attached.
yIf you do not use a certified HDMI cable, the screen may not display or a connection error may
occur. (Recommended HDMI Cable Types)
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
B
*A
10 mm
*B
A
18 mm
ASSEMBLING AND PREPARING
5
ENGENGLISH
Remote control,
batteries (AAA)
(See p.30, 31, 32)
Power cord
(Depending on model)
Cable Managements
2EA
(Only LY34**, LY540*)
(See p.18)
Owner’s manualCable Holder
(Depending on model)
Stand Screws
4EA, M4 x L14
(Only 42/47/55/60LY34**,
42/47/55/60LY540*,
42/47/55LY541*)
(See p.10, 12)
Wall Mount Spacers
2EA
(
Only 42LY34**, 42LY54**)
(See p.17)
Stand Screws
4EA, M4 x L20
(Only 32LY34**, 32LY540*,
42/47/55LY541*
6EA, M4 x L20
(Only
32LY541*
(See p.10, 11, 12)
Stand Bases
(Only LY34**, LY540*)
(See p.10)
)
)
AC-DC Adaptor
(Only LY33**, LW33**)
(Depending on model &
country)
(See p.20)
or
Stand Base
(Only LY33**, LW33**)
(Depending on model & country)
(See p.10)
6
ENGLISH
ENG
ASSEMBLING AND PREPARING
Stand Base/Stand Body
(Only LY541*)
(See p.11, 12)
Rubbers
2EA
(Only LY541*)
(See p.13)
Screws for Stand Fixing
2EA
(Depending on model)
(See p.15)
Power Cord Holder/Screw
1EA
(Only 42/47/55LY541*)
(See p.18)
Washers for Stand Fixing
2EA
(Depending on model)
(See p.15)
Torx Plus Star-Head
Screws
2EA
(Only LY541*)
(See p.11, 12)
Nuts for Stand Fixing
2EA
(Depending on model)
(See p.15)
Separate Purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
LG Audio Device
ASSEMBLING AND PREPARING
Parts and Button
(*Images may vary depending on models.)
A type : LY34**, LY540*B type : 22/28LY33**, 24LW33**(Except for India)
Screen
Screen
7
ENGENGLISH
Speakers
Remote control and
intelligent sensors
1
(Only LY540H)
Power Indicator
Joystick button
C type : 22/28LY33**, 24LW33** (Only India)
Screen
Speakers
Remote Control Sensor
Power Indicator
Joystick Button
Speakers
Remote control sensor
2
Power Indicator
Joystick button
2
D type : LY541*
Screen
Speakers
Remote control and
2
intelligent sensors
Power Indicator
1
Joystick button
2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.
NOTE
yYou can set the power indicator light to on or off by selecting OPTION in the main menus.
8
ASSEMBLING AND PREPARING
Using the Joystick button
ENGLISH
You can simply operate the TV functions, pressing or moving the joystick button forward,backward,
ENG
left or right.
(*Images may vary depending on models.)
Basic Functions
Power On
Power Off
Volume
Control
Programmes
Control
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.
If you place your finger over the joystick button and move it
forward or backward, you can scrolls through the save
programmes you want.
NOTE
yWhen your finger over the joystick button and push it to the forward or backward, left or right, be
careful not to press the joystick button. If you press the joystick button first, you may not be able
to adjust the volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( , , , ) moving the joystick button up, down, left or right.
TV offTurns the power off.
Settings Accesses the main menu.
CloseClears on-screen displays and returns to TV viewing.
Input List Changes the input source.
ASSEMBLING AND PREPARING
9
Lifting and Moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.
CAUTION
yAvoid touching the screen at all times, as
this may result in damage to the screen.
yIt is recommended to move the TV in the
box or packing material that the TV originally
came in.
yBefore moving or lifting the TV, disconnect
the power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yWhen transporting a large TV, there should
be at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yDo not apply excessive pressure to cause
exing /bending of frame chassis as it may
damage screen.
CAUTION
yWhen handling the TV, be careful not to
damage the protruding joystick button.
(Depending on model)
ENGENGLISH
yHold the top and bottom of the TV frame
rmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
10
1
2
ASSEMBLING AND PREPARING
ENGLISH
Setting up the TV
ENG
Image shown may differ from your TV.
Attaching the stand
(Only LY34**, LY540*)
1
B Stand Base
2
(Only 22/28LY33**, 24LW33**)
1
A Stand Base
Stand Base
2
M4 x L14
(Only
42/47/55/60LY34**,
42/47/55/60LY540*)
M4 x L20
4EA
(Only 32LY34**,
32LY540*)
ASSEMBLING AND PREPARING
11
(Only 32LY541*)
1
Stand Base
2
4 EA
M4 x L20
Stand Body
3
M4 x L20
2EA
or
Torx Plus Star-Head Screws
2EA
Tighten the two Torx head screws
(supplied with TV) with a Torx Bit Driver
(not supplied with TV).
ENGENGLISH
12
ASSEMBLING AND PREPARING
(Only 42/47/55LY541*)
ENGLISH
ENG
1
4 EA
M4 x L20
3
M4 x L14
4EA
or
Stand Base
2
Stand Body
M4 x L14
2EA
Torx Plus Star-Head Screws
2EA
Tighten the two of these four screws
and the two Torx screws (supplied with
TV) to secure the TV. Tighten the two
Torx screws with a Torx Bit Driver (not
supplied with TV).
CAUTION
yWhen attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
yMake sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.) Do not use too
much force and over tighten the screws;
otherwise screw may be damaged and
not tighten correctly.
NOTE
yRemove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
yThe Rubber will protect the opening
from accumulating dust and dirt. When
installing the wall mounting bracket, use
the Rubber. (Only LY541*)
ASSEMBLING AND PREPARING
Mounting on a table
(Depending on Model)
1 Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yDo not place the TV near or on sources
of heat, as this may result in fire or other
damage.
10 cm
10 cm
13
ENGENGLISH
WARNING
yIf a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
Rubber
2EA
»Using cabinets or stands
recommended by the manufacturer
of the television.
»Only using furniture that can safely
support the television.
»Ensuring the television is not
overhanging the edge of the
supporting furniture.
»Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
»Not standing the televisions on cloth
or other materials placed between
the television and supporting
furniture.
»Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
14
ASSEMBLING AND PREPARING
Adjusting the angle of the TV to suit view
ENGLISH
ENG
(Only LY541*)
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
CAUTION
yWhen adjusting the angle of the product,
watch out for your fingers.
»Personal injury may occur if hands
or fingers are pinched. If the product
is tilted too much, it may fall, causing
damage or injury.
Attaching the TV to a desk
(Depending on model)
The TV should be attached to a desk so
it cannot be pulled in a forward/backward
direction, potentially causing injury or damaging
the product.
20˚20˚
A type )
4-Screws
(Not supplied with TV)
Stand
Desk
NOTE
yScrew : M5 x L (*L: Table depth + 8~10
mm)
ex) Table depth: 15 mm, Screw: M5 x L25
ASSEMBLING AND PREPARING
15
B type )
2-Screws for Stand Fixing,
2-Washers for Stand Fixing,
2-Nuts for Stand Fixing
(Supplied with TV)
Stand
Desk
Securing the TV to a wall
(Features may vary depending on models)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the at surface.
ENGENGLISH
CAUTION
yMake sure that children do not climb on
or hang on the TV.
NOTE
yUse a platform or cabinet that is strong
and large enough to support the TV
securely.
yBrackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.