Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ENGLISH
ENG
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
ASSEMBLING AND PREPARING
4
ENGLISH
ENG
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD(Owner's Manual) /
Card
Power Cord
( Depending on the country )
( This cable is not included in all
D-SUB Cable
countries. )
AC-DC Adapter
DVI-D Cable
( This cable is not included in all
countries. )
or
AC-DC Adapter
( Depending on the country )
Stand Body
Stand Base
( This cable is not included in all
HDMI Cable
countries. )
ASSEMBLING AND PREPARING
5
CAUTION
Do not use any unapproved accessories to ensure the safety and product life span.
y
Any damages or injuries by using unapproved accessories are not covered by the warranty.
y
NOTE
The accessories supplied with your product may vary depending on the model.
y
Product specifications or contents in this manual may be changed without prior notice due to upgrade
y
of product functions.
ENGLISH
ENG
ENGLISH
ENG
ASSEMBLING AND PREPARING
6
Parts and buttons
Power Indicator
On: power is on
y
Off: power is off
y
(Joystick Button)
NOTE
Connection panel (See p.13~15)
The joystick button is located at the bottom of the monitor.
y
ASSEMBLING AND PREPARING
7
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
Press the joystick button once with your finger to turn on the
monitor.
Press and hold the joystick button once with your finger to turn off
the monitor.
You can control the volume by moving the joystick button left/right.
◄/►
Power on
Power off
Volume
Control
ENGLISH
ENG
ASSEMBLING AND PREPARING
8
ENGLISH
ENG
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
It is advisable to place the monitor in the
y
original box or packing material before attempting to move it.
Before moving or lifting the monitor, discon-
y
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
y
firmly. Do not hold the panel itself.
When holding the monitor, the screen should
y
face away from you to prevent it being
scratched.
When moving the monitor, avoid any strong
y
shock or vibrations to the product.
When moving the monitor, keep it upright,
y
never turn the monitor on its side or tilt it
sideways.
CAUTION
As far as possible, avoid touching the moni-
y
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
ASSEMBLING AND PREPARING
9
Setting up the Monitor set
Attaching the Stand Base
Place the Monitor set with the screen side
1
down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
1
Attach the
2
2
Attach the
3
Tighten the screw to the right.
Stand Body
Stand Base
to the monitor set.
Stand Body
to
Detaching the Stand Base
ENGLISH
Place the Monitor set with the screen side
1
down on a flat and cushioned surface.
2
Pull out the
1
from the monitor set.
2
Turn the screw to the left.
3
Pull out the
Stand Body
.
Stand Base
Stand Body
Stand Base
and
.
Stand Base
ENG
Stand Body
Stand Base
Stand Body
Stand Base
CAUTION
Illustrations in this document represent typical pro-
y
cedures, so they may look different from the actual
product.
Do not carry the monitor upside down by just hold-
y
ing the stand base. This may cause the monitor to
fall off the stand and could result in personal injury.
When lifting or moving the monitor, do not touch
y
the monitor screen. The force applied to the monitor screen may cause damage to it.
If you use the monitor panel without the stand
y
base, its joystick button may cause the moni-tor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
ASSEMBLING AND PREPARING
10
ENGLISH
ENG
Mounting on a table
Lift and tilt the Monitor set into its upright
1
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Press the joystick button on the bottom of the
3
monitor to turn on the monitor.
CAUTION
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
Using the cable holder
Connect the AC-DC Adapter and Power Cord
2
to a wall outlet.
or
Cable holder
ASSEMBLING AND PREPARING
11
WARNING
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
When adjusting the angle, may cause damage
or abnormality over excessive force.
NOTE
Tilt from +20 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
FrontRear
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
http://www.kensington.com
.
ENGLISH
ENG
Do not touch or press the screen when
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure
your body.
Connect the Kensington security system cable
between the Monitor set and a table.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.
ENGLISH
ENG
ASSEMBLING AND PREPARING
12
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
10cm
10cm
VESA (A x B)
y
A
B
CAUTION
Disconnect the power cord first, and then
y
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
y
slanted wall, it may fall and result in severe
injury.
Use only an authorized LG wall mount
y
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the Monitor set and void
your warranty.
Use only screws and wall mounts that
y
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
Screw length from outer surface of back
y
cover should be under 8mm.
Wall mount Pad
Back Cover
If you use screw longer than standard, the
1
monitor might be damaged internally.
If you use improper screw, the product might be
2
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Model
Wall Mount
(A x B)
Standard
screw
Number of
screws
Wall Mount
Plate
(Optional)
22M47D24M47D
22M47VQ24M47VQ
22M47H24M47H
22M47HQ24M47HQ
23M47D
23M47VQ
23M47H
75 x 75
M4 x L10
4
RW120
Wall mount Pad
Back Cover
Standard screw
Max.8mm
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit will include an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
y
instructions supplied with the wall mount.
USING THE MONITOR SET
13
USING THE MONITOR SET
Connecting to a PC
Your Monitor set supports Plug & Play*.
y
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
DVI-D connection
Transmits a digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with a DVI cable as shown in the following
illustrations.
ENGLISH
ENG
NOTE
When using a D-Sub signal input cable
y
connector for Macintosh
Mac adapter
y
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
NOTE
If you use HDMI PC, it can cause compatibility
y
problem.
USING THE MONITOR SET
14
ENGLISH
CAUTION
Connect the signal input cable
y
and tighten it by turning the
screws clockwise.
Do not press the screen with
y
your finger for a long time as this may
result in temporary distortion on the screen.
Avoid displaying a fixed image on the
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
When you want to use two PC in our Monitor,
y
please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set.
If you turn the Monitor set on while it is cold,
y
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
y
on the screen. This is normal.
Connecting to AV Devices
HDMI connection
Transmits the digital video and audio signals from
your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as illustrated below.
NOTE
If you use HDMI PC, it can cause compatibility
y
problem.
USING THE MONITOR SET
15
Connecting to External Devices
Peripheral device connection
Connect peripheral devices to the monitor using
headphone ports.
(sold separately)
NOTE
Peripheral devices are sold separately.
y
Cables with angled plugs may have clear-
y
ance issues, use straight plugs when possible.
ENGLISH
ENG
Angle TypeStraight Type
NOTE
Headphones or speakers may not work nor-
y
mally, depending on the server PC settings.
INSTALLING LG MONITOR SOFTWARE
16
ENGLISH
ENG
INSTALLING THE LG MONITOR SOFTWARE
Installing The Screen Split
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
LG Monitor Software.
Set the default Web browser to Internet Explorer.
1
Click the "Screen Split" on the CD's main
2
screen. When the file download window appears, click the Run button. (The file download
window may vary depending on the operating
system and the Internet Explorer version, but
the installation procedures are same.)
Follow the instructions to proceed with the
3
installation.
Check "I accept the terms of the agreement" on
4
the License Agreement screen and then click
the [Next] button.
CAUTION
Service Pack 1 or higher is required for
y
Windows 7 & Windows 8.
The Screen Split installation starts as shown
5
below.
INSTALLING LG MONITOR SOFTWARE
When the installation is complete, restart your
6
system.
17
ENGLISH
ENG
NOTE
Screen Split: This program automatically
y
splits the program window as desired.
Monitor Selection only supported in
extend display.
This program supported Windows 7&
Windows 8.
NOTE
If you run Screen Split, the Screen Split icon [
] appears in the system tray at the right bottom of
the PC screen.
Right-click the Screen Split icon and select a
layout you want.
ENGLISH
ENG
CUSTOMIZING SETTINGS
18
CUSTOMIZING SETTINGS
Activating the Main Menu
Press the joystick button on the bottom of the monitor.
1
Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
2
Press the joystick button once more to exit the main menu.
3
Joystick Button
ButtonMenu StatusDescription
Power Indicator
Main menu disabled
Main menu enabled
Main menu disabled
◄
Main menu enabled
Main menu disabled
►
Main menu enabled
Main menu disabled
▲
Main menu enabled
Main menu disabled
▼
Main menu enabled
Main Menu Features
Enables the main menu.
Exits the main menu.
(Holding down the button to turn off the monitor: You can turn off
the monitor this way at any time, including when the OSD is on.)
22M47VQ
23M47VQ
23M47H
24M47VQ
24M47H
24M47HQ
22M47H
22M47HQ
Adjusts the monitor volume level.
22M47D 23M47D 24M47D
Enables the navigation OSD.
Enters the menu features.
22M47VQ
23M47VQ
23M47H
24M47VQ
24M47H
24M47HQ
22M47H
22M47HQ
Adjusts the monitor volume level.
22M47D 23M47D 24M47D
Enables the navigation OSD.
Operates the Input change.
Enables the main menu.
Enters the reader feature.
Enables the main menu.
Turns off the monitor.
Main MenuDescription
Menu
Picture Mode
Configures the screen settings.
Select picture mode to achieve the best display effect.
You can choose the input signal.
• When two input signals are connected, you can select the input
Input
signal (D-SUB/DVI-D/HDMI) you want.
• When only one signal is connected, it is automatically detected.
The default setting is D-SUB.
Monitor off
Exit
Turns off the monitor.
Exits the main menu.
CUSTOMIZING SETTINGS
19
Customizing settings
Menu Settings
-Quick Settings
To view the
1
OSD menu
, press the
bottom of the monitor and then enter the
Quick Settings >
Go to
2
Configure the options following the instructions that appear in the
3
Brightness
bottom right corner.
To return to the upper menu or set other menu items, move the
4
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until you
5
exit.
Each option is described below.
Menu > Quick SettingsDescription
Brightness
Contrast
Volume
22M47VQ
23M47VQ
22M47H
23M47H
22M47HQ
24M47VQ
24M47H
24M47HQ
Adjusts the color contrast and brightness of the screen.
Adjusts the volume.
Jog joystick button down (
y
enable/disable the Mute function.
RatioAdjusts the screen ratio.
WideDisplays the video in wide-screen, regardless of the video signal input.
OriginalDisplays a video according to the input video signal aspect ratio.
SMART ENERGY
SAVING
High
Low
OffDisables SMART ENERGY SAVING .
joystick button
Menu
at the
.
by moving the joystick.
NOTE
) in the Volume menu will
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient
function.
Enables SMART ENERGY SAVING you can save energy with this energy- low
efficient function.
ENGLISH
ENG
NOTE
The display may look the same for Wide, Original options at the recommended resolution (1920 x
y
1080).
The ratio is disabled in the interlaced signal.
y
CUSTOMIZING SETTINGS
20
ENGLISH
ENG
NOTE
TOTAL POWER REDUCTION
y
TOTAL CO2 REDUCTION
y
SAVING DATA(W/h)
y
SMART SAVING (High)
SMART SAVING (Low)
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y
vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
LG calculated these values by using
y
(including broadcast video: IEC 62087)
SMART SAVING refers to how much power can be saved using the SMART ENERGY SAVING
y
function.
If option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and
y
Reader Mode and Color Wizard will automatically be Off.
: How much power is saved while using the monitor.
: Change the TOTAL POWER REDUCTION to CO2.
546 mm
(21.5 inch)
4 W/h4 W/h4 W/h
2 W/h2 W/h2 W/h
584 mm
(23 inch)
“broadcast video signal”
600 mm
(23.6 inch)
-Picture
To view the
1
OSD menu
, press the
the bottom of the monitor and then enter the
Picture
Go to
2
Configure the options following the instructions that
3
by moving the joystick.
appear in the bottom right corner.
To return to the upper menu or set other menu items,
4
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
5
to ◄ until you exit.
Each option is described below.
joystick button
Menu
at
.
CUSTOMIZING SETTINGS
21
ENGLISH
ENG
Menu > Picture Description
Picture ModeCustomAllows the user to adjust each element. The color mode of the main menu can be ad-
Reader 1It is a mode that the screen is adjusted to the best for the newspaper. If you want
Reader 2It is a mode that the screen is adjusted to the best for the cartoon. If you want screen
PhotoOptimizes the screen to view photos.
CinemaOptimizes the screen to improve the visual effects of a video.
GameOptimizes the screen for gameplay.
Color wizardRed
weakness
Green
weakness
OffIt is a mode that Color Wizard mode is off.
justed.
screen more bright, you can control brightness in Menu OSD.
more bright, you can control brightness in Menu OSD.
It is a mode for user who has inability to see red color. It make color weakness user
can easily distinguish red colors.
It is a mode for user who has inability to see green color. It make color weakness user
can easily distinguish green colors.
CUSTOMIZING SETTINGS
22
P ict u re
Adjust
PictureSUPER RESOLU-
TION+
ENGLISH
ENG
SharpnessAdjusts the sharpness of the screen.
Black Level
22M47VQ
23M47VQ
22M47H
23M47H
22M47HQ
Response Time
22M47VQ
23M47VQ 24M47VQ
22M47HQ
Over Scan
22M47VQ
23M47VQ
22M47H
23M47H
22M47HQ
ColorGammaSet your own gamma value. : Gamma 0, Gamma 1, Gamma 2, Off on
Color TempSelects the factory default picture color.
Six ColorMeets the user requirements for colors through adjusting the color and
ResetReturns the color settings to the default settings.
DisplayHorizontal To move image left and right.
Vertical To move image up and down.
ClockTo minimize any vertical bars or stripes visible on the screen background.The horizontal screen
PhaseTo adjust the focus of the display. This item allows you to remove any horizontal noise and clear
size will also change.
or sharpen the image of characters.
24M47VQ
24M47H
24M47HQ
24M47HQ
24M47VQ
24M47H
24M47HQ
HighOptimized picture quality is displayed when a user wants
crystal clear images. It is effective forhigh quality video or
game.
MiddleThe optimized picture quality is displayed when a user
wants images between low and highmodes for comfortable
viewing. It is effective for UCC or SD video.
LowThe optimized picture quality is displayed when a user
wants smooth and natural images. It iseffective for slowmoving pictures or still images.
OffSelect this option for everyday viewing. SUPER
RESOLUTION+ is turned off in this mode.
Sets the offset level (for HDMI only).
yOffset:
as a reference for a video signal, this is the darkest color
the monitor can display.
HighThe picture of the screen gets brighter.
LowThe picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the
screen. For a normal environment, it is recommended that you use
Normal. For a fast-moving picture, it is recommended that you use
High.
Setting to High may cause image sticking.
HighSets the response time to High.
MiddleSets the response time to Middle.
LowSets the response time to Low.
OffSets the response time to Off.
To select the range of output image for DTV timing in HDMI input.
(only for HDMI input)Recommend overscan function to turn on when
connect AV equipment.
the monitor, high gamma values display whitish images and low
gamma
values display blackish images.
If user don't want adjusted gamma, user can select Gamma off.
Warm:
Sets the screen color to a reddish tone.
Medium:
Cool:
Sets the screen color between a red and blue tone.
Sets the screen color to a bluish tone.
Custom
Red
Green
You can customize the picture color using Red, Green,
and Blue colors.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the
value, the more saturated and dark the colors become.
-General
.
General
OSD menu
, press the
by moving the joystick.
To view the
1
ton
at the bottom of the monitor and then enter the
Menu
Go to
2
Configure the options following the instructions that
3
appear in the bottom right corner.
To return to the upper menu or set other menu items,
4
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
5
to ◄ until you exit.
joystick but-
CUSTOMIZING SETTINGS
23
ENGLISH
ENG
Each option is described below.
Menu > GeneralDescription
LanguageTo choose the language in which the control names are displayed.
Power LEDTurns the power indicator on the front side of the monitor on/off.
OnThe power indicator is automatically turned on.
OffThe power indicator is automatically turned on.
Automatic Standby
22M47VQ
23M47VQ
23M47H
24M47VQ
24M47H
24M47HQ
The monitor will automatically switch to standby mode after a certain period.
your computer is set to the following.
22M47H
22M47HQ
ResolutionUser can set the desired resolution.This option is enabled only when the screen resolution on
NOTE
The function is enabled only when the screen resolution on your computer is set to the
following, except that the PC output wrong resolution.
1024x768, 1280x768, 1360x768, 1366x768,Off
1280x960, 1600x900,Off
1440x900, 1600x900,Off
OSD LockPrevents incorrect key input.
OnKey input is disabled.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input, and General are disabled.
OffKey input is enabled.
ENGLISH
ENG
CUSTOMIZING SETTINGS
24
-Auto Configuration
To view the
1
bottom of the monitor and then enter the
Go to
2
Configure the options following the instructions that appear in the
3
bottom right corner.
To return to the upper menu or set other menu items, move the
4
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
5
you exit.
OSD menu
Auto Configuration
, press the
by moving the joystick.
joystick button
Menu
.
at the
Each option is described below.
Menu > Auto ConfigurationDescription
Do you want to Auto confuguration?
YesOperate the Auto configuration for optimal display in D-SUB.
CancelCancel the select.
NOTE
This function will be enable only in analog input.
y
-Reset
To view the
1
ton
at the bottom of the monitor and then enter the
Menu
Go to
2
Configure the options following the instructions that
3
appear in the bottom right corner.
To return to the upper menu or set other menu items,
4
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
5
to ◄ until you exit.
Each option is described below.
Menu > ResetDescription
Do you want to reset your settings?
ResetReturns to the default settings.
CancelCancel the select.
OSD menu
.
Reset
by moving the joystick.
, press the
joystick but-
CUSTOMIZING SETTINGS
25
ENGLISH
ENG
ENGLISH
ENG
CUSTOMIZING SETTINGS
26
-Picture mode
Press the joystick button on the bottom of the monitor.
1
Picture mode
Go to
2
Configure the options following the instructions that appear in the
3
bottom.
by moving the joystick button to ▲.
Each option is described below.
Menu >
Picture Mode
Picture ModeCustomAllows the user to adjust each element. The color mode of the main menu can be
adjusted.
Reader 1It is a mode that the screen is adjusted to the best for the newspaper. If you want
screen more bright, you can control brightness in Menu OSD.
Reader 2It is a mode that the screen is adjusted to the best for the cartoon. If you want
screen more bright, you can control brightness in Menu OSD.
PhotoOptimizes the screen to view photos.
CinemaOptimizes the screen to improve the visual effects of a video.
GameOptimizes the screen for gameplay.
Description
NOTE
If option of Picture Mode is non-Custom , SMART ENERGY SAVING and Color Wizard will
y
automatically be Off.
TROUBLESHOOTING
27
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
Is the power indicator light on?
Is the power indicator flickering?
Do you see an "OUT OF RANGE"
message on the screen?
Do you see a "NO SIGNAL"
message on the screen?
Can 't you control some functions in OSD?
Do you see “OSD LOCKED” when
you push MENU button?
Can't you select some menu in
OSD?
yCheck and see if the power cord is connected properly to the power
outlet.
yPress the Power button.
yIf the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
yTry to turn on the PC.
yThis message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
yWhen the monitor is on "No-Signal" in 5 minutes, the monitor goes to
DPM mode.
yYou can secure the current control settings, so that they cannot be
inadvertently changed.
yYou can unlock the OSD controls at any time by entering the OSD
lock menu and changing items to off.
ENGLISH
ENG
Display image is incorrect
Display Position is incorrect.
On the screen background, vertical
bars or stripes are visible.
Any horizontal noise appearing in
any image or characters are not
clearly portrayed.
yEnter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yEnter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yEnter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yCheck Control Panel ► Display ► Settings and adjust the display to
the recommended resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits (true color).
ENGLISH
ENG
TROUBLESHOOTING
28
CAUTION
Control Panel ► Display ► Settings
Check
y
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
y
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
y
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect
The screen color is mono or
abnormal.
yCheck if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
yMake sure the video card is properly inserted in the slot.
ySet the color setting higher than 24 bits (true color) at
► Settings
The screen blinks.
yCheck if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
and see if the frequency or the resolution were
Control Panel
.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
yBe sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yMake sure to check if the video card supports Plug&Play function.
22M47VQ
22M47H
22M47HQ
23M47VQ
23M47H
The screen is flickering.
Did you select the recommended
resolution?
24M47VQ
24M47H
24M47HQ
yIf the selected resolution is HDMI
1080i
60/50 Hz, the screen may
be flickering. Change the resolution to the recommended resolution
1080P
.
SPECIFICATIONS
29
SPECIFICATIONS
22M47D22M47VQ22M47H
DisplayScreen Type54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD
Pixel Pitch0.248 mm x 0.248 mm (Pixel Pitch)
ResolutionMax1920 x 1080 @ 60 Hz
RecommendVESA 1920 x 1080 @ 60 Hz
Power
Consumption
Power Input19 V 1.2 A
AC-DC Adapter
Dimensions
(Width x Height x
Depth)
Weight2.6 kg
Tilt Range-5° to 20°
Environmental
conditions
Stand BaseAttached ( ), Detached (O)
Power cordWall-outlet type
On Mode : 20 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT:
With Stand51.0 cm x 40.9 cm x 19.5 cm
Without Stand51.0 cm x 31.4 cm x 6.8 cm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
19 V 1.3 A
22M47HQ
Anti-Glare coating
Visible diagonal size: 54.6 cm
10°C to 35 °C
10 % to 80 %
-20°C to 60 °C
5 % to 90 % non-Condensing
ENGLISH
ENG
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
ENGLISH
ENG
SPECIFICATIONS
30
Sync InputHorizontal
Frequency
30 kHz to 83 kHz
(Automatic)
30 kHz to 61 kHz
(Automatic)
Vertical
Frequency
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI-D)
56 Hz to 61 Hz (HDMI)
Input FormSeparate Sync.
Digital
Video InputSignal Input 15 pin D-SUB
Connector
DVI-D Connector
(Digital)
HDMI Connector
Input FormRGB Analog (0.7 Vp-p/
75 ohm)
Digital
Plug & PlayDDC 2B(Analog)
DDC 2B(Digital)
DDC 2B(HDMI)
22M47D 22M47H 22M47HQ 22M47VQ
●●●●
●●●●
●●
●●●
●●●●
●●●●
●●●●
●●
●●●
●●●●
●●●●
●●●●
●●
●●●
SPECIFICATIONS
SPECIFICATIONS
31
23M47D23M47VQ23M47H
DisplayScreen Type58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-
Glare coating
Visible diagonal size: 58.4 cm
Pixel Pitch0.265 mm x 0.265 mm (Pixel Pitch)
ResolutionMax1920 x 1080 @ 60 Hz
RecommendVESA 1920 x 1080 @ 60 Hz
Power
Consumption
Power Input19 V 1.3 A
AC-DC Adapter
Dimensions
(Width x Height x
Depth)
Weight2.8 kg
Tilt Range-5° to 20°
Environmental
conditions
Stand BaseAttached ( ), Detached (O)
Power cordWall-outlet type
On Mode : 21 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT:
With Stand54.5 cm x 42.9 cm x 19.7 cm
Without Stand54.5 cm x 32.5 cm x 6.8 cm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
19 V 1.3 A
10°C to 35 °C
10 % to 80 %
-20°C to 60 °C
5 % to 90 % non-Condensing
ENGLISH
ENG
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
ENGLISH
ENG
SPECIFICATIONS
32
Sync InputHorizontal
Frequency
30 kHz to 83 kHz
(Automatic)
30 kHz to 61 kHz
(Automatic)
Vertical
Frequency
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI-D)
56 Hz to 61 Hz (HDMI)
Input FormSeparate Sync.
Digital
Video InputSignal Input 15 pin D-SUB
Connector
DVI-D Connector
(Digital)
HDMI Connector
Input FormRGB Analog (0.7 Vp-p/
75 ohm)
Digital
Plug & PlayDDC 2B(Analog)
DDC 2B(Digital)
DDC 2B(HDMI)
23M47D 23M47H 23M47VQ
●●●
●●●
●●
●●
●●●
●●●
●●●
●●
●●
●●●
● ●●
●●●
●●
●●
SPECIFICATIONS
33
SPECIFICATIONS
24M47D24M47VQ24M47H24M47HQ
DisplayScreen Type60.0 cm (23.6 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 60.0 cm
Pixel Pitch0.272 mm x 0.272 mm (Pixel Pitch)
ResolutionMax1920 x 1080 @ 60 Hz
RecommendVESA 1920 x 1080 @ 60 Hz
Power
Consumption
Power Input19 V 1.3 A
AC-DC Adapter
Dimensions
(Width x Height x
Depth)
Weight2.8 kg
Tilt Range-5° to 20°
Environmental
conditions
Stand BaseAttached ( ), Detached (O)
Power cordWall-outlet type
On Mode : 22 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT:
With Stand55.7 cm x 43.8 cm x 19.7 cm
Without Stand55.7 cm x 34.2 cm x 6.8 cm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
19 V 1.3 A
10°C to 35 °C
10 % to 80 %
-20°C to 60 °C
5 % to 90 % non-Condensing
ENGLISH
ENG
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
ENGLISH
ENG
SPECIFICATIONS
34
Sync InputHorizontal
Frequency
30 kHz to 83 kHz
(Automatic)
30 kHz to 61 kHz
(Automatic)
Vertical
Frequency
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI-D)
56 Hz to 61 Hz (HDMI)
Input FormSeparate Sync.
Digital
Video InputSignal Input 15 pin D-SUB
Connector
DVI-D Connector
(Digital)
HDMI Connector
Input FormRGB Analog (0.7 Vp-p/
75 ohm)
Digital
Plug & PlayDDC 2B(Analog)
DDC 2B(Digital)
DDC 2B(HDMI)
24M47D 24M47H 24M47HQ 24M47VQ
●●●●
●●●●
●●
●●●
●●●●
●●●●
●●●●
●●
●●●
●●●●
●●●●
●●●●
●●
●●●
Preset Modes (Resolution)
D-SUB/DVI-D Timing
SPECIFICATIONS
35
ENGLISH
ENG
Display Modes (Resolution)
720 x 40031.46870-/+
640 x 48031.46960-/-
640 x 48037.50075-/-
800 x 60037.87960+/+
800 x 60046.87575+/+
1024 x 76848.36360-/-
1024 x 76860.02375+/+
1152 x 86467.50075+/+
1280 x 102463.98160+/+
1280 x 102479.97675+/+
1680 x 105065.29060-/+
1920 x 108067.50060+/+Recommend Mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
HDMI Timing
22M47VQ22M47H22M47HQ
Factory support mode
(Preset Mode)
480P31.5060O
576P31.2550O
720P37.5050O
720P45.0060O
1080P56.2550O
1080P67.5060
23M47VQ
Horizontal
Frequency(kHz)
23M47H
24M47H
Vertical
Frequency(Hz)
24M47HQ 24M47VQ
HDMI
O
Recommend Mode
Indicator
ModeLED Color
On ModeWhite (Only 15 seconds)
Sleep ModeBlinking White
Off ModeOff
PROPER POSTURE
36
ENGLISH
ENG
horizontally outright.
PROPER POSTURE
Proper posture for using the Monitor set.
Adjust the
Monitor set and
your posture to
allow you to view
images at the
optimal viewing
angle.
Place your hands
gently on the
keyboard, keeping
your arms bent at
the elbows and
Adjust the location of the
Monitor set to avoid it
reflecting light.
Declaration of Conformity
Trade Name: LG
Model : 22M47D,22M47VQ,22M47H,22M47HQ,
23M47D,23M47VQ,23M47H,
24M47D,24M47VQ,24M47H,24M47HQ
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE
U. S. A.,Inc. has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.