LG 22MB65PY, 24MB65PY, 23MB35PY, 27MB65PY, 24mb35py Owner's Manual

www.lg.com

OWNER’S MANUAL

IPS LED MONITOR
(LED LCD MONITOR)

22MB65PY
24MB65PY

Please read this manual carefully before operating
your set and retain it for future reference.

IPS LED(LED LCD) MONITOR MODEL

ENGLISH

2

ENG

ENGLISH

TABLE OF CONTENTS

CONTENTS

3 ASSEMBLING AND PREPAR-

ING

3 Unpacking

4 Parts and buttons

5 Setting up the Monitor set

5 - Attaching the Stand Base

5 - Detaching the stand base

6 - Detaching the stand body

6 - Using the cable holder

7 - Mounting on a table

7 - Adjusting the angle

8 - Adjusting the stand height

8 - Using the Kensington locking device

9 - Swivel stand

9 - Using the Pivot function

10 - Mounting on a wall

11 USING THE MONITOR SET

11 Connecting to a PC

11 - D-SUB connection

11 - DVI-D connection

13 - Peripheral device connection

14 CUSTOMIZING SETTINGS

15 Customizing Settings

15 - Menu Settings

16 - Picture

17 - Color

18 - Display

18 - Audio

19 - Others

20 READER SETTING

21 SUPER ENERGY SAVING SET-

TING

22 TROUBLESHOOTING

24 SPECIFICATIONS

24 22MB65PY

25 24MB65PY

26 Preset Modes (Resolution)

27 Indicator

28 PROPER POSTURE

28 Proper posture for using the Monitor set.

3

ENG

ENGLISH

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.

y

Do not use any unapproved accessories to ensure the safety and product life span.

y

Any damages or injuries by using unapproved accessories are not covered by the warranty.

y

The accessories supplied with your product may vary depending on the model.

y

Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.

CAUTION

NOTE

Stand Base

CD(Owner's Manual) /

Card

D-SUB Cable

(This cable is not included in all

countries.)

( Depending on the country )

( Depending on the country )

Power Cord

DVI-D Cable

(This cable is not included in all

countries.)

One Screw

Cable Holder

USB Cable

Audio Cable

4

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

(Power Button)

Power Indicator

y

LED On : Power is on

y

LED Off: Power is off

Front Side Buttons

Input Connectors (See p.11 to 13)See p.11 to 13) to 13)13))

5

ENG

ENGLISH

ASSEMBLING AND PREPARING

Setting up the Monitor set

Attaching the Stand Base

1

Place the Monitor set with the screen side

down on a flat and cushioned surface.

Stand Base

Stand Body

Stand Base

Stand Body

y

To protect the screen from scratches, cover
the surface with a soft cloth.

3

Using a coin, turn the screw clockwise to se-

cure the

stand base.

2

Check the

position (at the front and rear)

of

the stand body, then mount the

stand base

on

the

stand body

as shown in the figure.

CAUTION

Stand Base

y

The components appearing in the illustra­tions may look different from the actual prod­uct.

y

Do not carry the monitor upside-down as this
may cause it to fall off its stand, resulting in
damage or injury.

y

To avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec­essary pressure on the screen.

y

Only remove the tape and the locking pin
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.

Detaching the stand base

1

Place the monitor's screen face down.

To protect the screen from scratches, cover the
surface with a soft cloth.

2

Using a coin, turn the screw in the stand base

counterclockwise. Detach the

stand base

from

the

stand body

.

CAUTION

6

ENG

ENGLISH

ASSEMBLING AND PREPARING

Detaching the stand body

1

Place the monitor's screen face down. To

protect the screen from scratches, cover the
surface with a soft cloth.

2

Using a screwdriver, remove the four screws

and detach the stand from the monitor.

Using the cable holder

Fix the Knob (Cable holder) to the
Hole(Hingebody).

1

2

3

Use one screw to fix the Cable Holder and
monitor set.

Close the Cable holder.

7

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1

Lift the monitor and place it on the table in an

upright position.

Install at least

10 cm

away from the wall to

ensure sufficient ventilation.

10 cm

10 cm

10 cm

10 cm

Adjusting the angle

1

Place the monitor mounted on the stand base

in an upright position.

2

Adjust the angle of the screen. The angle of

the screen can be adjusted up to 5° forwards
and 20° backwards for a comfortable viewing
experience.

y

To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.

y

Be careful not to touch or press the screen
area when adjusting the angle of the monitor.

WARNING

2

3

Press the (Power) button on the front of the

monitor to turn on the monitor.

y

Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.

CAUTION

Front SideRear Side

1

2

Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
(Before connect please check the “ON/OFF”
knob in “O” state).

Press the “ON/OFF” knob in “ ” state
(Open the power).

8

ENG

ENGLISH

ASSEMBLING AND PREPARING

Using the Kensington locking
device

The connector for the Kensington lock is located
on the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.

Connect the monitor to the table with the Kensing-

ton lock cable.

y

Using the Kensington lock is optional. The
accessories can be purchased at your local
electronics store.

NOTE

Adjusting the stand height

1

Place the monitor mounted on the stand base

in an upright position.

2

Remove the

tape

attached at the bottom rear

of the

stand body,

then pull out the

locking

pin.

Tape

Locking Pin

Stand Body

y

Once the pin is removed, it is not necessary
to re-insert it to adjust the height.

3

The height can be adjusted up to

120 mm

.

y

Do not put your finger be­tween the screen and the
base (chassis) when adjust­ing the screen's height.

CAUTION

WARNING

120.0mm

9

ENG

ENGLISH

ASSEMBLING AND PREPARING

Swivel stand

y

Image shown may differ from your Monitor
set.

1

Swivel 355 degrees and adjust the angle of the

Monitor set to suit your view.

1

Lift the monitor to its highest height to utilize

the Pivot function.

Using the Pivot function

The pivot function allows you to rotate the screen
90 degrees clockwise.

2

Landscape & Portrait : You can rotate the panel

90° clockwise. Please be cautious and avoid
contact between the monitor head and the
Stand Base when rotating the screen to access
the Pivot function. If the monitor head touches
the Stand Base, then the Stand Base could
crack.

Head
section

Stand
section

3

Be careful with the cables when rotating the

screen.