LG 22LV2500UA Users manual

Order Number : GETEC-C1-11-016 FCC Part 15 subpart B Test Report Number : GETEC-E3-11-006 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: LED LCD TV/Monitor

FCC ID.: BEJ22LV2500UA

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

ENGLISH

ENG

registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license.”

OWNER’S MANUAL

LED LCD TV / LCD TV / PLASMA TV

Please read this manual carefully before operating the set and retain it for future reference.

LED LCD TV MODELS

19LV2500 22LV2500 26LV2500 32LV2500

32LV3520

32LV3500 37LV3500 42LV3500 47LV3500 55LV3500

42LV3520

P/NO : SAC34134216 (1012-REV01)

LCD TV MODELS

22LK330 26LK330 32LK330 32LK430 42LK430

32LK450 37LK450 42LK450 47LK450 42LK520 47LK520 55LK520

PLASMA TV MODELS

42PW340 50PW340 42PW350 50PW350

42PW350U 50PW350U 42PW350R

50PW350R 50PZ200 60PZ200

www.lg.com

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

NOTE

Plasma

: Plasma TV

y

Image shown may differ from your TV.

y

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

y

LCD

: LED LCD TV, LCD TV

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

Read these instructions. Keep these instructions. Heed all warning. Follow all instruction.

Do not use this apparatus near water.

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

- TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

y

Clean only with dry cloth.

y

Do not block any ventilation openings. Install

y

in accordance with the manufacturer’s instructions.

Do not install near any heat sources such

y

as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the

y

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

ENGLISH

ENG

ENGLISH

ENG

Protect the power cord from being walked on

y

or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified

y

by the manufacturer.

Use only with a cart, stand, tripod, bracket,

y

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning

y

storms or when unused for long periods of time.

Refer all servicing to qualified service

y

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Never touch this apparatus or antenna during

y

a thunder or lightning storm.

When mounting a TV on the wall, make sure

y

not to install the TV by hanging the power and signal cables on the back of the TV.

Do not allow an impact shock or any objects

y

to fall into the product, and do not drop anything onto the screen.

CAUTION concerning the Power Cord

y

(Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

- To reduce the risk of fire or

Warning

y

electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

IMPORTANT SAFETY INSTRUCTIONS

Do not expose to dripping or splashing and

y

do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

Grounding

y

Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit Breaker

DISCONNECTING DEVICE FROM THE MAIN

y

POWER

The power outlet must remain readily accessed in the event the device needs to be unplugged.

As long as this unit is connected to the AC

y

wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

Do not attempt to modify this product in any

y

way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

ANTENNAS Outdoor antenna grounding

y

(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the

U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Ground Clamp

Electric Service

Equipment

Ground Clamp

Cleaning

y

NEC: National Electrical Code

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

Moving

y

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

Ventilation

y

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

If you smell smoke or other odors coming

y

from the TV, unplug the power cord contact an authorized service center.

Do not press strongly upon the panel with

y

hand or sharp object such as nail, pencil or pen, or make a scratch on it.

Keep the product away from direct sunlight.

y

ENGLISH

ENG

ENGLISH

ENG

Dot Defect

y

The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

Generated Sound

y

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

Viewing 3D Imaging (For 3D TV)

y

- When viewing 3D imaging, watch the TV from an effective viewing angle and within the appropriate distance. If you exceed this viewing angle or distance, you may not be able to view the 3D imaging. Furthermore, the 3D imaging may not display if it is viewed while you are lying down.

- If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.

- Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.

- Pregnant woman, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.

- Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.

- Please prevent children under the age of 5 from watching 3D TV. It may affect their vision development.

- Warning for photosensitization seizure: Some viewers may experience a seizure or epilepsy when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV.

Also certain symptoms can occur in

unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV.

Risk of photosensitization seizure can be

reduced with the following actions.

- Take frequent breaks from watching 3D TV.

- For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures.

- Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV.

- Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time.

- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.

- Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving.

LCD

y

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

DISPOSAL

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

(Hg lamp only used in LCD TVs)

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

TABLE OF CONTENTS

ENGLISH

ENG

2 LICENSES

3 IMPORTANT SAFETY IN-

STRUCTIONS

8 TABLE OF CONTENTS

10 ASSEMBLING AND PREPARING

10 Unpacking 13 Optional Extras 14 Parts and buttons 21 Lifting and moving the TV 21 Setting up the TV 21 - Attaching the stand

ENGLISH

ENG

27 - Mounting on a table 29 - Mounting on a wall 30 - Tidying cables

31 REMOTE CONTROL

34 WATCHING TV

34 Connecting to an antenna or cable 34 - Connecting an antenna or basic cable 34 - Connecting a cable box 35 Turning the TV on for the first time 36 Watching TV 36 Managing channels 36 - Setting up channels 37 - Using favorite channels 38 - Checking current program info 40 Using additional options 40 - Adjusting aspect ratio 41 - Changing AV modes 41 - Using the input list 42 - Locking the buttons on the TV (Child

Lock)

42 Using the quick menu 43 Using the customer support 43 - Testing the Picture / Sound 43 - Using the product or service informa-

tion

44 3D IMAGING (FOR 3D TV)

44 3D Technology 45 - When using 3D Glasses 45 - 3D Imaging 46 Viewing 3D Imaging

Viewing Range

48 ENTERTAINMENT

48 - Connecting USB storage devices 49 - Browsing files 51 - Viewing Videos 54 - DivX registration code 55 - Viewing Photos 57 - Listening to music

59 CUSTOMIZING TV SETTINGS

59 The Main Menus

60 Customizing Settings 60 - CHANNEL Settings 61 - PICTURE Settings 65 - AUDIO Settings 66 - TIME Settings 67 - LOCK Settings 69 - OPTION Settings

71 MAKING CONNECTIONS

72 Connection Overview 73 Connecting to a HD receiver, DVD, or

VCR player 73 - HDMI 73 - DVI to HDMI Connection 74 - Component Connection

Connection

TABLE OF CONTENTS

ASSEMBLING AND PREPARING

74 - Composite Connection 75 - RGB Connection 75 Connecting to an

Audio System

75 - Digital optical audio connection 76 Connecting to a USB

LCD

76 Connecting to a Headphone ( 76 SIMPLINK

Connection

)

76 - Activating and Using the SIMPLINK

menus

78 MAINTENANCE

78 Cleaning Your TV 78 - Screen and frame 78 - Cabinet and stand 78 - Power cord 78 Preventing “Image burn” or “Burn-in” on

your TV screen

79 TROUBLESHOOTING

81 SPECIFICATIONS

87 IR CODES

ENGLISH

ENG

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

AV MODE

INPUT

ENERGY

SAVING

123

456

7809

FLASHBK

LIST

MARK

FAV

P A G

CHVOL

MUTE

INFO

Q.MENU

ENTER

EXIT

BACK

L/R SELECT

FREEZE

RATIO

Remote control and batteries (AAA) Owner’s manual CD

ENGLISH

ENG

Polishing cloth

(Depending on model)

1 Gently wipe the spots on the cabinet with the polishing cloth.

89 EXTERNAL CONTROL DEVICE

SETUP

96 OPEN SOURCE LICENSE

ASSEMBLING AND PREPARING

PW340, PW350, PW350U, PW350R, PZ200 series

(Other models)

x 4

M4 x 26

M5 x 14.5

x 3

(For 60PZ200)

x 4

M4 x 28

M5 x 25

x 3

Screw for assembly Cable holder Power Cord holder

(For 42PW340, 42PW350)

x 2

(For 50PW340, 50PW350)

x 3

Power Cord Protection cover Ferrite core

Protection cover tape

LV3500 series

(For 32LV3500)

x 8

M4 x 12

Screw for assembly Composite gender cable Cable holder Screw for fixing

ENGLISH

ENG

ENGLISH

ENG

26/32LK330, LK430, LK450, LK520 series

(Except 47LK450,

47/55LK520)

x 8

M4 x 20

Screw for assembly Screw for fixing Protection cover Power Cord

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

NOTE

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

y

upgrade of product functions. How to use the ferrite core

y

- (For PW340, PW350 series) Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.

Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

[to an External device]

- (For 42PW340, 42PW350) Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.

[to a wall plug]

10 mm (+/-5 mm)

[to the TV]

LV2500 series

x 2

M4 x 16

M4 x 6

Screw for assembly Cable holder

22LK330

Cable holder Protection cover Power Cord

- (For 50PW340, 50PW350) Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to a wall plug]

LCD

(

) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

y

10 mm (+/-5 mm)

[to the TV]

(0.39 inches) thick and 18 mm (0.7 inches) width.

*A 10 mm (0.39 inches) *B

18 mm (0.7 inches)

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV.

3D Glasses

D-sub 15 pin signal cable

(AG-S230, AG-S250, AG-S270)

1 When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable

with a ferrite core to maintain standards compliance for the product.

ENGLISH

ENG

Parts and buttons

PW340, PW350, PW350U, PW350R, PZ200 series

Side Connection panel

ENGLISH

ENG

USB input

HDMI input

AV (Audio and Video) input

AUDIO

L/MONO

VIDEO

AV IN 2

REMOTE

CONTROL IN

USB ININ 3

/DVI IN

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

VIDEO

RGB IN (PC)

Screen

Remote control and intelligent

sensors

Speakers

HOME

INPUT

ENTER

AV IN 1

L/MONO

AUDIO

AUDIO IN (RGB/DVI)

VIDEO

AUDIO

COMPONENT IN

VOL

ANTENNA

/CABLE

Touch buttons

Rear Connection panel (See p.71)

Turns the power on or off.

Description

Touch button

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

ASSEMBLING AND PREPARING

32LV2500, LV3500 series

/ DVI IN

LAN

OPTICAL DIGITAL

AUDIO OUT

RS-232C IN

Screen

Speakers

(RGB/DVI)

AUDIO IN

AV IN 1

VIDEO

RGB IN (PC)

L/MONO

AUDIO

(CONTROL & SERVICE)

VOL

COMPONENT IN

VIDEO

AUDIO

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/ CABLE IN

ENTER

ANTENNA /

CABLE IN

19/22/26LV2500

(RGB/DVI) AUDIO IN

VIDEO

L/MONO

AUDIO

AV IN

Screen

Speakers

VOL

ENTER

COMPONENT IN

VIDEO

AUDIO

HOME

ANTENNA

INPUT

CABLE

Rear Connection panel (See p.71)

Remote control and intelligent

sensors

Power indicator

Touch buttons

Side Connection panel

Remote control and intelligent

sensors

USB input

USB IN

Power indicator

Headphone

ENGLISH

ENG

output

DC-IN

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN(CONTROL & SERVICE)

INPUT

HOME

Touch buttons

USB IN

IN 3

H/P

AV IN 2

VIDEO / AUDIO

Rear Connection panel (See p.71)

ENGLISH

ENG

Touch button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

Touch button

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

ASSEMBLING AND PREPARING

LK450 series

Side Connection panel

USB input

HDMI input

Headphone output

AV (Audio and Video) input

USB IN

IN 3

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

(RGB/DVI) AUDIO IN

AV IN 1

VIDEO

L/MONO

AUDIO

Screen

COMPONENT IN

VIDEO

AUDIO

Speakers

VOL

ENTER

ANTENNA /

CABLE IN

LK330 series

(For 22LK330)

ANTENNA /

CABLE IN

Buttons

Screen

(For 26/32LK330)

VOL

ENTER

HOME

INPUT

Remote control and intelligent

Power indicator

Rear Connection panel (See p.71)

sensors

Buttons

VOL

COMPONENT IN

VIDEO

AUDIO

HOME

INPUT

(RGB/DVI) AUDIO IN

RGB IN (PC)

(CONTROL & SERVICE)

ENTER

Speakers

AV IN 1

VIDEO

L/MONO

AUDIO

Side Connection panel

USB input

Remote control and intelligent

sensors

Power indicator

HDMI input

Headphone

ENGLISH

ENG

output

AV (Audio and Video) input

INPUT

HOME

Touch buttons

Rear Connection panel (See p.71)

ENGLISH

ENG

USB IN

IN 3

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RS-232C IN

Touch button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

Button

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

ASSEMBLING AND PREPARING

LK430 series

Side Connection panel

USB input

HDMI input

Headphone output

AV (Audio and Video) input

USB IN

IN 3

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

Screen

(RGB/DVI) AUDIO IN

Speakers

AV IN 1

VIDEO

L/MONO

AUDIO

COMPONENT IN

VIDEO

AUDIO

LK520 series

Side Connection panel

VOL

ENTER

HOME

INPUT

Remote control and intelligent

sensors

Power indicator

ANTENNA /

CABLE IN

Rear Connection panel (See p.71)

Buttons

ENGLISH

ENG

ENGLISH

ENG

USB input

HDMI input

Headphone output

AV (Audio and Video) input

USB IN

IN 3

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

Screen

(RGB/DVI) AUDIO IN

Speakers

AV IN 1

VIDEO

L/MONO

AUDIO

COMPONENT IN

VIDEO

AUDIO

VOL

ENTER

HOME

INPUT

Remote control and intelligent

sensors

Buttons

Power indicator

ANTENNA /

CABLE IN

Rear Connection panel (See p.71)

Button

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

Button

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size.

CAUTION

Avoid touching the screen at all times, as

y

this may result in damage to the screen.

It is recommended to move the TV in the

y

box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect

y

the power cord and all cables. When holding the TV, the screen should face

y

away from you to prevent damage.

Hold the top and bottom of the TV frame

y

firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

When transporting a large TV, there should

y

be at least 2 people. When transporting the TV by hand, hold the

y

TV as shown in the following illustration.

Setting up the TV

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

Attaching the stand

PW340, PW350, PW350U, PW350R, PZ200 series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from damage. Make sure against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

Model Screw for

42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200

60PZ200 M4 x 25 3

no objects press

assembly

M5 x 14.5 3

Number of screws

ENGLISH

ENG

ENGLISH

ENG

Secure the TV and the stand with the 4

screws.

Model Screw for

42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200

60PZ200 M4 x 28 4

assembly

M4 x 26 4

Number of screws

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over tighten.

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 4 screws and pull the stand away

from the TV.

Model Screw for

42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200

60PZ200 M4 x 28 4

Push the supplied protection cover into the

opening at the bottom of the TV until it locks in place.

Attach the protection cover tape.

- This will protect the opening from accumulating dust and dirt.

- When installing the wall mounting bracket, use the Protection cover.

assembly

M4 x 26 4

Number of screws

Protection cover tape

When transporting the TV, do not expose the

y

TV to jolts or excessive vibration. When transporting the TV, keep the TV

y

upright, never turn the TV on its side or tilt towards the left or right.

Protection cover

ASSEMBLING AND PREPARING

LV3500 series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

Model Screw for

32/37/42/47/55 LV3500

Secure the TV and the stand with the 4

assembly

M4 x 12 4

screws.

Model Screw for

32/37/42/47/55 LV3500

assembly

M4 x 12 4

Number of screws

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 4 screws and pull the stand away

from the TV.

Model Screw for

32/37/42/47/55 LV3500

assembly

M4 x 12 4

Number of screws

ENGLISH

ENG

ENGLISH

ENG

LV2500 series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

Model Screw for

19/22/26/32 LV3500

Secure the TV and the stand with the 2

assembly

M4 x 6 1

screws.

Model Screw for

19/22/26/32 LV3500

assembly

M4 x 16 2

Number of screws

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 2 screws and pull the stand away

from the TV.

Model Screw for

19/22/26/32 LV3500

assembly

M4 x 16 2

Number of screws

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over tighten.

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over tighten.

ASSEMBLING AND PREPARING

22LK330

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the TV as shown.

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the screws and pull the stand away

from the TV.

Push the supplied protection cover into the

opening at the bottom of the TV until it locks in place.

This will protect the opening from accumulating dust and dirt. When installing the wall mounting bracket, use the Protection cover.

Protection cover

ENGLISH

ENG

26/32LK330, LK430, LK450, LK520 series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

ENGLISH

ENG

Model Screw for

22/26LK330 32/42LK430 32/37/42/47 LK450 42/47/55LK520

Secure the TV and the stand with the 4

screws.

Model Screw for

22/26LK330 32/42LK430 32/37/42/47 LK450 42/47/55LK520

assembly

M4 x 20 4

assembly

M4 x 20 4

Number of screws

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 4 screws and pull the stand away

from the TV.

Model Screw for

22/26LK330 32/42LK430 32/37/42/47 LK450 42/47/55LK520

Push the supplied protection cover into the

opening at the bottom of the TV until it locks in place.

This will protect the opening from accumulating dust and dirt. When installing the wall mounting bracket, use the Protection cover.

assembly

M4 x 20 4

Number of screws

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over tighten.

Protection cover

ASSEMBLING AND PREPARING

Mounting on a table

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm

(4 inches)

10 cm

Connect the power cord to a wall outlet.

CAUTION

Do not place the TV near or on sources

y

of heat, as this may result in fire or other damage.

NOTE

Swivel 20 degrees to the left or right and

y

adjust the angle of the TV to suit your view.

10 cm

2020

Securing the TV to a table

(For 26/32LK330, 32/42LK430, 32/37/42LK450, 42LK520, 32LV3500)

Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.

WARNING

To prevent TV from falling over, the TV

y

should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.

ENGLISH

ENG

Securing the TV to a wall (optional)

Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

Mount the wall brackets with the bolts to the

ENGLISH

ENG

wall. Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets tightly

with a sturdy rope. Make sure to keep the rope horizontal with the

flat surface.

CAUTION

Make sure that children do not climb on or

y

hang on the TV.

NOTE

Use a platform or cabinet that is strong and

y

large enough to support the TV securely. Brackets, bolts and ropes are optional. You

y

can obtain additional accessories from your local dealer.

Using the Kensington security system (optional)

The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the TV and a table.

NOTE

The Kensington security system is optional.

y

You can obtain additional accessories from your local dealer.

ASSEMBLING AND PREPARING

Mounting on a wall

Attach an optional wall mount at the rear of the TV carefully and install the wall mount on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.

10 cm

(4 inches)

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model 42/50PW340

VESA (A x B) 400 x 400 600 x 400 Standard screw M6 M8 Number of screws 44 Wall mount bracket

(optional)

Model 19/22/26LV2500

VESA (A x B) 100 x 100 200 x 100 Standard screw M4 M4 Number of screws 44 Wall mount bracket

(optional)

42/50PW350 42/50PW350U 42/50PW350R 50PZ200

PSW400B, PSW400BG, DSW400BG

22/26LK330

LSW100B, LSW100BG

10 cm

60PZ200

PSW600B

32LV2500 32LV3500 32LK330 32LK430 32LK450

LSW100B, LSW100BG

Model 37LV3500

VESA (A x B) 200 x 200 400 x 400 Standard screw M6 M6 Number of screws 44 Wall mount bracket

(optional)

42LK430 37/42/47LK450 42/47LK520

LSW200B, LSW200BG

CAUTION

Disconnect the power first, and then move

y

or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted

y

wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may

y

cause damage to the TV and void your warranty. Use the screws and wall mounts that meet

y

the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

Use the screws that are listed on the VESA

y

standard screw specifications. The wall mount kit includes an installation

y

manual and necessary parts. The wall mount bracket is optional. You can

y

obtain additional accessories from your local dealer. The length of screws may differ depending

y

on the wall mount. Make sure to use the proper length. For more information, refer to the manual

y

supplied with the wall mount.

42/47/55LV3500 55LK520

LSW400B, LSW400BG, DSW400BG

ENGLISH

ENG

Tidying cables

PW340, PW350, PW350U, PW350R, PZ200 series

Install the power cord holder and power cord.

It will help prevent the power cable from being removed by accident.

(Other models)

Power cord holder

Gather and bind the cables with the cable

holder.

ENGLISH

ENG

CAUTION

Do not move the TV by holding the cable

y

holder and power cord holder, as the cable holders may break, and injuries and damage to the TV may occur.

(For 60PZ200)

Cable holder

22LK330, LV2500, LV3500 series

Gather and bind the cables with the cable

holder.

Cable holder

26/32LK330, LK430, LK450, LK520 series

Gather and bind the cables with the cable

management clip.

Fix the cable management clip firmly to the TV.

Cable management clip

REMOTE CONTROL

ENERGY

123

456

7809

SAVING

AV MODE

INPUT

LIST

FLASHBK

ENERGY

123

456

7809

SAVING

AV MODE

INPUT

LIST

FLASHBK

REMOTE CONTROL

The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching

and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.

y

Make sure to point the remote control at the remote control sensor on the TV.

POWER Turns the TV on or off.

ENERGY SAVING (See p.61) Adjusts the Energy Saving settings.

AV MODE (See p.41) Selects an AV mode.

INPUT (See p.41) Rotates through inputs. Also switches the TV on from standby.

TV Returns to the last TV channel.

Alphanumeric buttons Enters letters and numbers.

LIST (See p.37) Accesses the saved channel list.

- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.

FLASHBK Alternates between the two last channels selected (pressing repeatedly); Selects a channel on the currently selected channel list.

ENGLISH

ENG

ENGLISH

ENG

INFO

BACK

MARK

FAV

MUTE

Home

ENTER

MARK

FAV

RATIO

MUTE

Home

ENTER

CHVOL

Q.MENU

EXIT

CHVOL

Q.MENU

EXIT

VOL

P A G E

Adjusts the volume level.

MARK Selects a menu or option. FAV (See p.37) Accesses your favorite channel list.

3D (See p.44) Used for viewing 3D video.

MUTE Mutes all sounds.

CH Scrolls through the saved channels. PAGE Moves to the previous or next screen.

VOL Adjusts the volume level.

MARK Selects a menu or option. FAV (See p.37) Accesses your favorite channel list.

RATIO (See p.40) Resizes an image.

MUTE Mutes all sounds.

CH Scrolls through the saved channels. PAGE Moves to the previous or next screen.

REMOTE CONTROL

WATCHING TV

INFO

BACK

Home

ENTER

Q.MENU

EXIT

3D SETTING

INFO (See p.38) Views the information of the

Home Accesses the main menus, or saves your input and exit the menus.

Q. MENU (See p.42) Accesses the quick menu.

Navigation buttons (up/down/left/right) Scrolls through menus or options.

BACK Allows the user to move back one step in an interactive application or other user interaction function.

SIMPLINK (See p.76) Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.

EXIT Clears all on-screen displays and returns to TV viewing.

Colored buttons These access special functions in some menus.

3D SETTING ( Used for viewing 3D video.

Plasma

) (See p.46)

current program.

ENGLISH

ENG

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV referring to the following. The illustrations may differ from the actual items and a RF cable is optional.

Connecting an antenna or basic cable

Connect the TV to a wall antenna socket with a RF cable (75 Ω).

ENGLISH

ENG

Connecting a cable box

Connect the TV to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 Ω).

FREEZE

RATIO

Control buttons Controls the SIMPLINK compatible devices (USB,SIMPLINK).

Plasma

FREEZE ( Freezes the current frame ( Simplink.).

RATIO (See p.40) Resizes an image.

)

Not supported when using USB Mode and

NOTE

Use a signal splitter to use more than 2 TVs.

y

If the image quality is poor, install a signal

y

amplifier properly to improve the image quality. If the image quality is poor with an antenna

y

connected, aim the antenna to the proper direction. Visit http://lgknowledgebase.com for more

y

information about the antenna and cable connection. Search for antenna.

CAUTION

Make sure not to bend the copper wire of

y

the RF cable.

Copper wire

Complete all connections between devices,

y

and then connect the power cord to the power outlet to prevent damage to your TV.

Turning the TV on for the first time

When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.

Connect the power cord to a power outlet.

The Power indicator turns red and the TV switches to Standby mode.

In Standby mode, press

TV on. The Initial setting screen appears if you turn

the TV on for the first time.

NOTE

You can also access

y

accessing

Follow the on-screen instructions to customize

your TV settings according to your preferences.

Language

OPTION

in the main menu.

Mode Setting

Power Indicator

(LED LCD TV)

Time Zone

Auto Tuning

NOTE

To display images in the best quality for

y

your home environment, select

Use Store Demo

y

environment. If you select

y

customized settings will switch the default settings of minutes.

Power Indicator

y

Store Demo mode.

is suitable for the retail

Store Demo

feature is

to turn the

POWER

Home Use

Home

, any

back to

disabled in

for

in 3

Initial Setting

Selects a language to display.

Selects the home environment.

Sets the power indicator.

Selects the time zone and daylight saving.

Scans and saves available channels automatically.

Store Demo

WATCHING TV

When the basic settings are complete,

press

ENTER

NOTE

If you do not complete the Initial setting,

y

it will appear whenever the TV turns on. Disconnect the power cord from the

y

power outlet when you do not use the TV for a long period of time.

To turn the TV off, press

POWER

ENGLISH

ENG

Watching TV

ENGLISH

ENG

WATCHING TV

In Standby mode, press

on.

Press

Control the TV using the following buttons

while you are watching TV.

CH (^, v)

LIST

0 - 9

VOL (+, -) MUTE AV MODE

Q.MENU

FLASHBK

RATIO

FREEZE

1 The Lock icon (ᯢ) appears in front of a

channel blocked with parental control.

2 Each

sound settings. If you select and sound settings will be restored to the previously customized settings.

To turn the TV off, press

The TV switches to Standby mode.

and select TV.

INPUT

Button Description

Scrolls through saved channels. Selects a channel on the saved

channel list. Selects a channel by entering

numbers. Adjusts the volume level. Mutes all sounds.

Selects an AV mode (See p.41). Accesses the quick menus

(See p.42). Alternates between the last two

channels selected. Resizes an image (See p.40). Freezes the current frame while you

are watching TV (

has the optimized image and

AV mode

POWER

to turn the TV

Plasma

, the image

Off

Managing channels

Setting up channels

Storing channels

To store channels automatically,

Press

Press the Navigation buttons to scroll to

CHANNEL

Press the Navigation buttons to scroll to

Tuning

Select

The TV scans and saves available channels automatically.

When you are finished, press

When you return to the previous menu, press

BACK

To store channels manually,

Press

Press the Navigation buttons to scroll

CHANNEL

Press the Navigation buttons to scroll to

Manual Tuning

Scroll through the channel types, and then add

or delete channels.

When you are finished, press

When you return to the previous menu, press

BACK

If the TV scans a blocked channel, you will

y

be prompted to enter your password to keep the channel scanned. You can store up to 1000 channels. The

y

number of channels that you can store differs depending on the broadcasting signal environment. The channels are stored in the order of

y

TV, Cable DTV

to access the main menus.

Home

and press

Start

ENTER

to start automatic tuning.

ENTER

NOTE

If the TV scans and saves channels,

y

the previously saved channels will be overwritten.

EXIT

to access the main menus.

Home

and press

ENTER

EXIT

NOTE

and

Cable TV

Auto

DTV

WATCHING TV

Editing your channel list

Press

Press the Navigation buttons to scroll to

CHANNEL

Press the Navigation buttons to scroll to

Channel Edit

Edit channels using the following buttons.

^, v,

ENTER

CH (^, v)

Blue button

FAV

Q.MENU

Yellow button

When you are finished, press

When you return to the previous menu, press

BACK

Selecting a channel on the channel list

Press

- To move to the previous or next page, press

- To tune to the "

Edit

Select a channel you want and press

to access the main menus.

Home

and press

Button Description

Highlights the channel type.

Scrolls through channel types or

channels. Selects the highlighted channel to

view. Moves to the previous or next

page. Adds or deletes a channel.

The deleted channel displays in blue.

Registers or cancels the current channel in favorite channel list.

Selects your desired favorite channel group.

Blocks or unblocks a channel.

to access the channel list.

LIST

, v).

(

, press

Blue

CHANNEL

button.

ENTER

EXIT

menu -

Channel

ENTER

Using favorite channels

Add the channels that you watch frequently to the favorite list.

Setting up your favorite list

Select a channel to add to the favorite list.

Press

Press the Navigation buttons to select your

desired favorite channel group.

Press the

the current channel in favorite channel list. Press the

Press the Navigation buttons to scroll to

Favorite

Press

the favorite list.

When you are finished, press

You can also setup Favorite List in the

y

CHANNEL

Selecting a channel on the favorite list

Press

- To move to the previous or next page, press

Select a channel you want and press

FAV

Yellow

button to move to

Blue

to add the selected channel to

ENTER

NOTE

menu -

to access the favorite list.

FAV

, v).

(

button to register or cancel

Channel Edit

EXIT

ENTER

Checking current program info

Press The following information appears at the top of the screen.

Banner information Program title Current timeEnd time

᯦'79

ᱏ᯻

Multilingual

ENGLISH

ENG

ENGLISH

ENG

Dolby Digital

Caption

Aspect ratio

Resolution

Rating

to view the information of the currently program while you are watching.

ENTER

%ULHI,QIR7LWOH7HVW





$0 $0

&11

Icon Description

1H[W$01HZV

Start time

᯵

᯸

᯿

ᰆ

ᰇ

L S S L

S

ᯢ

Progress bar

The program contains two or more audio language services. You can change the

audio language

The program contains a Dolby Digital audio signal in TV and HDMI input sources.

The program contains one or more language caption services. You can change the

caption language

The original aspect ratio of the video is 4:3. The original aspect ratio of the video is 16:9 (wide).

The video resolution is 720 x 480i. The video resolution is 720 x 480p. The video resolution is 1280 x 720p. The video resolution is 1920 x 1080i. The video resolution is 1920 x 1080p.

The program contains Rating information. See "LOCK Settings" on p.67.

using the quick menu.

᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69

6XQ)HE$0

NOTE

The Lock icon (ᯢ) appears in front of a

y

channel blocked with parental control. If you select the blocked channel, you will be

y

prompted to enter your password.

WATCHING TV

᯦'79&11

%ULHI,QIR7LWOH7HVW

$0

1RLQIRUPDWLRQ 6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ ZLWKUHJXODUDQGVSHFLDOJXHVWV 6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ

Button Description

INFO

< or >

^ or v

Shows current channel information. Shows previous or next channel

information. Changes a channel.

᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69

$0

ᯱ

ᯐ&K&KDQJH۽1H[Wᯙ:DWFK

ᯕ8S

ᯕ'RZQ

WATCHING TV

Using additional options

Adjusting aspect ratio

Resize an image to view at its optimal size by pressing

You can also change the image size by

y

pressing

Ratio

The available ratio varies depending on the

y

input source.

16:9

while you are watching TV.

RATIO

NOTE

or accessing

Q. MENU

in the

: Resizes images to fit the screen width.

PICTURE

menu.

Aspect

: Resizes images to the previous standard

4:3

4:3.

: Formats an image to fit the screen

Zoom

width. The top and bottom of the image may not appear.

ENGLISH

ENG

ENGLISH

ENG

Just Scan

size without

: Displays video images in the original

cutting off the edges.

NOTE

If you select

y

image noises at the edge

screen.

The input sources: DTV, Component,

y

HDMI-DTV, and DVI-DTV (720p/1080i/1080p) support Just Scan.

Set By Program

aspect ratio

Just Scan

: Displays images in the same

as the original image.

, you may see

or edges of the

NOTE

If you access, menus,

Press

y

vertically. Press

y

or down.

Cinema Zoom

cinemascope ratio, 2.35:1.

To change the ratio of the cinema zoom,

y

press To move the zoom focus up or down,

y

press

Aspect Ratio

or > to stretch an image

or v to move the zoom focus up

: Formats an image to the

or > and its range is from 1 to 16.

or v.

in the

NOTE

If you enlarge or reduce an image, the

y

image may be distorted.

Quick

+ 46 hidden pages