SAFETY INSTRUCTIONS
• Please read these safety precautions carefully before using the product.
ENGLISH
• In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.
WARNING
CAUTION
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
If you ignore the caution message, you may be slightly injured or the product may be damaged.
PRECAUTION IN INSTALLING THE PRODUCT
WARNING
Keep away from heat sources like electrical
heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Do not use the product in damp place such as
a bathroom or any place where it is likely to get
wet.
- This may cause a fire or could give an electric
shock.
If you can smell smoke or other odors or hear
a strange sound unplug the power cord and
contact the service center.
- If you continue to use without taking proper
measures, electrical shock or fire can occur.
CAUTION
Install the product on a flat and stable place
that has no risk of dropping the product.
- If the product is dropped, you may be
injured or the product may be broken.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in installation such as bookcase or rack.
- Ventilation required.
ELECTRICAL POWER RELATED PRECAUTIONS
WARNING
Make sure to connect the power cable to the
grounded current.
- You may be electrocuted or injured.
Do not touch the power plug with wet hands.
Additionally, it the cord pin is wet or covered
with dust, dry the power plug completely or
wipe dust off.
- You may be electrocuted due to excess
moisture.
During a thunder or lightning storm, unplug
the power cable or signal cable.
- You may be electrocuted or a fire can break
out.
CAUTION
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off
this unit by SWITCH.
PRECAUTIONS IN MOVING THE PRODUCT
WARNING
Make sure to turn off the product.
Make sure to remove all cables before mov-
ing the product.
- You may be electrocuted or the product
can be damaged.
CAUTION
Do not shock the product when moving it.
- You may be electrocuted or the product
can be damaged.
Make the panel face forward and hold it
with both hands to move.
- If you drop the product, the damaged
product can cause electric shock or fire.
Contact with the service center for repair.
PRECAUTIONS IN USING THE PRODUCT
WARNING
Do not disassemble, repair or modify the
product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN /
BURN-IN” ON YOUR TELEVISION SCREEN
-
When a fixed image (e.g. logos, screen menus, video game,
computer display and teletext pages) is displayed on the television for an extended period it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or
“burn-in”. Image burn is not covered under the manufacturer’s
warranty.
-
In order to prevent image burn, avoid displaying a fixed image on
your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
-
Image burn can also occur on the letterboxed areas of your
television if you use the 4:3 aspect ratio setting for an extended
period.
2
PREPARATION
ENGLISH
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
(Except 32LV2***)
Owner’s Manual
Power Cord
Remote Control
Batteries
(AAA)
Only 26/32LK3**, 32/42LK4**
This item is not included for all models.
Polishing Cloth
Polishing cloth for use on the screen.
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
Do not use excessive force. This may
cause scratching or discolouration.
1-screw for stand fixing
(Only 26/32LK3**, 32/42LK4**,
32LV2***)
Only 22LK3**
Protection cover
Wall Mounting Bracket (Separate purchase)
LSW100B or LSW100BG
Only 19/22/26LV2***
M4 x 16
Bolts for stand
assembly
Cable Holder
(Only 22LK3**,
19/22/26LV2***)
x 2
AC/DC Adaptor
LSW200B or LSW200BG
x 8
M4 x 20
Bolts for stand
assembly
Only 32LV2***
M4 x 14
Bolts for stand
assembly
or
Protection cover
x 8
(19/22/26/32LV2***,
22/26/32LK3**, 32LK4**)
(42LK4**)
4
FRONT PANEL CONTROLS
P
INPUT
HOME
OK
P
INPUT
HOME
OK
NOTE
► The energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.
CAUTION
► Do not step on the glass stand or subject it to any impact.
It may break, causing possible injury from fragments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
■ Image shown may differ from your TV.
Only 22/26/32LK3**
Only 22LK3**
ENGLISH
POWER
INPUT
HOME
OK
VOLUME
PROGRAMME
INPUT
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.)
HOME
SPEAKER
OK
Remote Control Sensor
P
Only 26/32LK3**
P
OK
OK
HOME
HOME
INPUT
INPUT
POWER
PROGRAMME
VOLUME
5
PREPARATION
ENGLISH
BACK PANEL INFORMATION
■ Image shown may differ from your TV.
Only 22LK3**
1
Only 26/32LK3**
10
10
7
1
AV IN2
4
2
3
5
6 7
4
2
3
5
6 7
8
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
3
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
4
RGB Input
Connect the output from a PC.
5
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
9
6
RGB/DVI Audio Input
8
9
Connect the audio from a PC.
7
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
8
Component Input
Connect a component video/audio device to these
jacks.
9
Antenna Input
Connect RF antenna to this jack.
10
USB Input
Connect USB storage device to this jack.
8