LG 22LU50FD, 47LH50YD Owner’s Manual
<![endif]>ENGLISH
LCD TV
OWNER’S MANUAL
LCD TV MODELS
22LU5*** 42LH5***
26LU5*** 47LH5*** 32LH2*** 42LH9***
37LH2*** 47LH9***
42LH2*** 42SL8***
32LH4*** 47SL8***
37LH4*** 55SL8***
42LH4***
47LH4***
55LH4***
Please read this manual carefully before operating your TV.
Retain it for future reference.
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this information.
To your dealer when requiring any service.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
Owner's |
|
|
|
|
|
Manual |
|
|
|
|
|
|
POWER |
|
|
|
|
|
AV MODE |
ENERGYSAVING |
|
|
|
|
MUTE |
|
or |
|
or |
|
LIST |
Q.VIEW |
|
EXIT |
|
Owner’s Manual |
Batteries |
|
|
|
|
|
MENU |
RETURN / EXIT |
|
|
|
|
Q.MENU INFO GUIDE MARK |
|
|
|
|
|
|
FAV |
|
TEXT T.OPT SUBTITLE |
|
|
|
|
|
|
|
Power Cord
Remote Control
POWER ON/OFF
TV/RAD
MARK
FAV
EXIT
AV MODE
RATIO
This item is not included for all models.
Polishing Cloth
Polishing cloth for use on the screen.
*Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
Do not use excessive force. This may cause scratching or discolouration.
Only 22/26LU5***
x 2 |
x 3 |
(Only 22LU5***) |
(Only 26LU5***) |
Only 32/37/42LH2***, 32/37/42/47/55LH4***, 42/47LH5***, 42/47LH9***
(Except 55LH4***)
|
or |
Bolts for stand assembly |
Protection cover |
(Refer to p.10) |
(Refer to p.13) |
Wall Mounting Bracket(Separate purchase) |
|
||||
RW120 |
|
RW230 |
AW-47LG30M |
||
(22LU5 |
) |
(26LU5 |
***, |
32LH2 |
(32/37/42LH2***, |
*** |
|
|
*** |
32/37/42/47LH4*** , |
|
|
|
32LH4***) |
|||
|
|
|
|
|
42/47LH5***, |
|
|
|
|
|
42/47LH9***) |
(Only 26LU5***, 32/37/42LH2***
32/37/42LH4***, 42LH5***, 42LH9***)
1-screw for stand fixing (Refer to p.11)
AW-55LH40M
(55LH4*** ) |
<![endif]>ACCESSORIES
1
CONTENTS
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
|
PREPARATION |
|
| <![if ! IE]> <![endif]>CONTENTS |
Attaching the TV to a desk . . . . . . . . . . . . . . . . . |
. 11 |
|
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . |
. 4 |
|
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . |
7 |
|
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
Detaching Stand . . . . . . . . . . . . . . . . . . . . . . . . . |
11 |
|
Back Cover for Wire Arrangement . . . . . . . . . . . . |
12 |
|
Not Using the desk-type stand . . . . . . . . . . . . . . . |
13 |
|
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
13 |
|
Kensington Security System . . . . . . . . . . . . . . . . . |
13 |
|
Careful installation advice . . . . . . . . . . . . . . . . . |
14 |
|
Desktop Pedestal Installation . . . . . . . . . . . . . . . |
14 |
|
Wall Mount: Horizontal Installation . . . . . . . . . . . . |
15 |
|
Antenna or Cable Connection . . . . . . . . . . . . . . . |
16 |
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . 17
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Digital Audio Out Setup . . . . . . . . . . . . . . . . . . . . 25
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . 26
Usb Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
- Screen Setup for PC Mode . . . . . . . . . . . . . . .32
Software Update . . . . . . . . . . . . . . . . . . . . . . . . |
. . .52 |
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 53 |
Selecting the Programme List . . . . . . . . . . . . . . |
. . 54 |
Favourite Programme Setup . . . . . . . . . . . . . . . |
. . 55 |
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 56 |
MHEG Guide . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 57 |
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 57 |
Simple manual . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 58 |
. . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 59 |
AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 62 |
Initializing (Reset to original factory settings) |
. . .63 |
TO USE A BLUETOOTH
Precautions when using the Bluetooth . . . . . . . . 64 Setting the Bluetooth . . . . . . . . . . . . . . . . . . . . . . 65 Set TV PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Bluetooth headset
- Connecting a new Bluetooth headset . . . . . . .67 - Connecting to Bluetooth headset already registered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 - Disconnecting the Bluetooth headset during use . . .68 - When requesting to connect to TV from the Bluetooth headset . . . . . . . . . . . . . . . . . . . . . . . .68
Managing Registered Bluetooth device . . . . . . . . 69 My Bluetooth Information. . . . . . . . . . . . . . . . . . . .70 Receiving Photos from external Bluetooth device . . . . .71 Listening to the Musics from external Bluetooth device . . . .71
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions . . . . . . . . . . . . |
. . . 36 |
Turning on the TV . . . . . . . . . . . . . . . . . . . . . . |
. . .42 |
Programme Selection . . . . . . . . . . . . . . . . . . . |
. . . 42 |
Volume Adjustment . . . . . . . . . . . . . . . . . . . . |
. . . 42 |
Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . 43 |
On-Screen Menus Selection and Adjustment |
. . . 44 |
Auto Programme Tuning . . . . . . . . . . . . . . . . . |
. . . 45 |
Manual Programme Tuning (In Digital Mode) |
. . . 46 |
Manual Programme Tuning (In Analogue Mode) |
. . 47 |
Programme Edit . . . . . . . . . . . . . . . . . . . . . . . . |
. . . 49 |
Booster (In Digital Mode) . . . . . . . . . . . . . . . . |
. . . 51 |
TO USE A USB DEVICE
When connecting a USB device . . . . . . . . . . . . . . 72 Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 DivX Registration Code . . . . . . . . . . . . . . . . . . . . .84 Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
2
EPG (ELECTRONIC PROGRAMME |
|
GUIDE) (IN DIGITAL MODE) |
|
Switch on/off EPG ...................................................... |
86 |
Select a Programme.................................................... |
86 |
Button Function in NOW/NEXT Guide Mode....... |
86 |
Button Function in 8 Day Guide Mode.................. |
87 |
Button Function in Date Change Mode................ |
87 |
Button Function in Extended Description Box......... |
88 |
Button Function in Remind Setting Mode......................... |
88 |
Button Function in Schedule List Mode................ |
88 |
PICTURE CONTROL |
|
Picture Size (Aspect Ratio) Control ...................... |
89 |
Picture Wizard................................................................ |
91 |
Energy Saving ................................................................ |
92 |
Preset Picture Settings |
|
- Picture Mode-Preset............................................ |
93 |
Manual Picture Adjustment |
|
- Picture Mode-User option................................. |
94 |
Picture Improvement Technology........................... |
95 |
Expert Picture Control............................................... |
96 |
Picture Reset ................................................................ |
99 |
LED Local Dimming..................................................... |
99 |
Power Indicator........................................................... |
100 |
Demo Mode................................................................ |
101 |
Mode Setting............................................................... |
102 |
SOUND & LANGUAGE CONTROL |
|
Auto Volume Leveler................................................. |
103 |
Clear Voice II ............................................................... |
104 |
Preset Sound Settings - Sound Mode................. |
105 |
Sound Setting Adjustment -User Mode .............. |
106 |
SRS TruSurround XT ................................................. |
106 |
Balance......................................................................... |
107 |
TV Speakers On/ Off Setup.................................... |
108 |
Selecting Digital Audio Out .................................... |
109 |
Audio Reset................................................................... |
110 |
I/II |
|
- Stereo/Dual Reception (In Analogue Mode |
|
Only).......................................................................... |
111 |
- NICAM Reception (In Analogue Mode Only).... |
112 |
- Speaker Sound Output Selection................... |
112 |
Country/Area Selection.................................................. |
113 |
Language Selection (In Digital Mode only)........ |
114 |
TIME SETTING |
|
Clock Setup ................................................................. |
115 |
Auto On/ Off Time Setting ..................................... |
116 |
Sleep Timer Setting ................................................... |
117 |
PARENTAL CONTROL / RATINGS |
|
Set Password & Lock System.................................. |
118 |
Block Programme ....................................................... |
119 |
External Input Blocking............................................. |
120 |
Key Lock....................................................................... |
121 |
DIGITAL TELETEXT |
|
Teletext within Digital Service................................ |
122 |
Teletext in Digital Service........................................ |
123 |
APPENDIX |
|
Troubleshooting......................................................... |
124 |
Maintenance .............................................................. |
126 |
Product Specifications............................................. |
127 |
IR Codes ...................................................................... |
130 |
External Control Device Setup .............................. |
132 |
Open Source Software Notice............................... |
139 |
Open Source License ............................................... |
140 |
<![endif]>CONTENTS
3
PREPARATION
<![endif]>PREPARATION
FRONT PANEL CONTROLS
CAUTION
G When the TV cannot be turned on with the remote control, press the main power button on the TV. (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control).
GDo not step on the glass stand or subject it to any impact.
It may break, causing possible injury from fragments of glass, or the TV may fall.
GDo not drag the TV. The floor or the product may be damaged.
■Image shown may differ from your TV.
32/37/42LH2***
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
P |
PROGRAMME |
|
VOLUME |
OK |
OK |
|
|
MENU |
MENU |
|
|
INPUT |
INPUT |
|
POWER |
|
|
Main Power Switch
4
■ Image shown may differ from your TV.
32/37/42/47/55LH4***, 42/47LH5***
PROGRAMME
P
VOLUME
OK
OK
MENU
MENU
INPUT
INPUT
POWER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding conditions.
Power/Standby Indicator |
ON |
OFF |
|
• Illuminates red in standby mode. |
|
• Illuminates blue when the TV is switched on.
Main Power Switch
Only 42/47LH9***
SPEAKER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
Power/Standby Indicator
•Illuminates red in standby mode.
•Illuminates white when the TV is switched on.
P 
PROGRAMME
VOLUME
OK
OK
MENU
MENU
INPUT
POWER
Main Power Switch
<![endif]>PREPARATION
5
PREPARATION
■ Image shown may differ from your TV.
<![endif]>PREPARATION
22/26LU5*** |
Only 26LU5*** |
Only 22LU5*** |
|
|
|
|
|
PROGRAMME |
POWER INPUT |
MENU |
OK |
VOLUME |
PROGRAMME |
||
|
|
|
|
|
P |
|
INPUT MENU |
OK |
|
|
P |
VOLUME |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OK |
|
|
|
|
|
OK |
|
|
|
|
|
|
|
MENU |
|
|
|
|
|
MENU |
|
|
|
|
|
|
|
INPUT |
|
|
|
|
|
INPUT |
|
|
|
|
|
|
|
POWER |
|
|
|
|
|
|
Main |
|
|
|
|
|
ON |
Power |
|
|
|
|
|
|
|
|
Remote Control Sensor |
OFF |
Switch |
|||
|
|
|
||||
Power/Standby Indicator |
|
|
|
|||
Illuminates red in standby mode. |
|
|
|
|||
Illuminates white when the TV is switched on. |
|
|
||||
6
BACK PANEL INFORMATION
■ Image shown may differ from your TV.
Only 22/26LU5***
ON
1
OFF
|
2 |
3 |
4 |
5 |
6 |
7 |
8 |
|
|
USB IN |
|
AUDIO OUT |
|
|
|
|
|
SERVICE |
|
|
RS-232C |
|
|
|
|
|
RGB IN (PC) |
|
|
||
|
|
|
|
(CONTROL&SERVICE) |
|
||
|
2 |
|
AUDIO IN |
VIDEO |
L(MONO) AUDIO |
|
|
|
|
|
(RGB/DVI) |
|
|||
|
1(DVI) |
|
|
|
|
<![if ! IE]> <![endif]>INAV |
|
|
|
|
|
|
|
|
|
|
|
IN |
|
|
|
|
|
|
|
|
|
VIDEO |
|
AUDIO |
CABLE |
|
|
|
9 |
|
|
10 |
12 |
1 |
|
|
|
|
|
|
|
|
This TV operates on an AC power. The voltage is |
||||||
|
indicated on the Specifications page. Never |
||||||
|
attempt to operate the TV on DC power. |
|
|||||
2 |
HDMI Input |
|
|
|
|
|
|
|
Connect an HDMI signal to HDMI IN. |
|
|||||
|
Or DVI (VIDEO) signal to HDMI/DVI port with DVI |
||||||
|
to HDMI cable. |
|
|
|
|
||
3 |
SERVICE ONLY PORT |
|
|
|
|||
4RGB/DVI Audio Input
Connect the audio from a PC or DTV.
5RGB IN Input
Connect the output from a PC.
6OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
Only 26LU5***
2
<![if ! IE]><![endif]>
3IN
10
|
|
|
|
|
AV IN2 |
|
|
|
Only 26LU5*** |
|
|
|
|
||
2 |
3 |
4 |
5 |
6 |
7 |
|
8 |
|
USB IN |
|
|
OUT |
|
|
|
|
SERVICE ONLY |
|
|
RS-232C IN |
|
|
|
|
|
RGB IN (PC) |
|
|
|
||
|
|
|
(CONTROL&SERVICE) |
|
|
||
|
|
AUDIO IN |
|
|
L(MONO) AUDIO R |
|
|
|
|
(RGB/DVI) |
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>IN1AV |
|
|
|
IN |
|
|
|
|
|
|
|
|
|
VIDEO |
|
AUDIO |
|
CABLE |
|
|
9 |
|
|
10 |
1 |
12 |
PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Component Input
Connect a component video/audio device to these jacks.
Audio/Video Input
Connect audio/video output from an external device to these jacks.
Antenna Input
Connect RF antenna to this jack.
12
Connect cable signals to this jack.
<![endif]>PREPARATION
7
PREPARATION
■ Image shown may differ from your TV.
Only 32/37/42LH2***, |
|
|
Only 32/37 |
Only 32/37/42 |
Only 42/ |
||
32/37/42/47/55LH4***, 42/47LH5*** |
|||||||
/42LH2*** |
/47/55LH4*** |
47LH5*** |
|||||
| <![if ! IE]> <![endif]>PREPARATION |
|
|
|
11 |
13 |
13 |
|
1 |
|
|
2 |
2 |
2 |
||
|
|
|
<![if ! IE]> <![endif]>ServiceOnly IN 3 |
<![if ! IE]> <![endif]>IN 3 |
<![if ! IE]> <![endif]>IN 4 |
||
Only 42/47LH5*** |
|
|
|
|
|
|
|
2 |
3 |
4 |
5 |
|
|
|
|
|
|
|
OPTICAL |
|
|
|
|
|
|
|
AUDIO OUT |
|
|
|
|
RGB (PC) (CONTROL&SERVICE)
|
AUDIO IN |
|
|
|
12 |
12 |
12 |
|
VIDEO |
L/MONO AUDIO |
R |
<![if ! IE]> <![endif]>AV |
|
|
|
|
/DVI IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
(RGB/DVI) |
|
|
|
|
|
|
/DVI IN |
|
|
|
|
|
|
|
|
2 |
|
|
AV IN2 |
AV |
|
AV IN2 |
2 |
2 |
|
|
|
|||
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
1(DVI) |
1(DVI) |
AUDIO |
|
|
|
|
|
VIDEO |
|
|
|
|
|
||
|
|
|
|
|
|
||
|
COMPONENT IN |
|
IN CABLE IN |
|
|
|
|
8
1
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2 HDMI Input
Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
3RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4RGB IN Input
Connect the output from a PC.
5OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
6RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
8
910
7
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external device to these jacks.
Component Input
Connect a component video/audio device to these jacks.
Antenna Input
Connect RF antenna to this jack.
Cable Input
Connect cable signals to this jack.
SERVICE ONLY PORT
Audio/Video Input
Connect audio/video output from an external device to these jacks.
13 USB IN Input
Connect USB storage device to this jack.
■ Image shown may differ from your TV.
Only 42/47LH9***
1 |
|
|
|
|
2 |
|
|
|
|
OPTICAL |
|
|
|
|
AUDIO OUT |
|
|
|
|
AUDIO IN |
|
|
|
|
VIDEO |
L/MONO AUDIO |
R |
<![if ! IE]> <![endif]>AV |
|
/DVI IN |
|
|
|
|
|
|
|
|
|
(RGB/DVI) |
|
|
|
|
3 |
|
|
|
|
2 |
|
|
|
|
2 |
|
|
|
|
1 |
|
|
|
|
1(DVI) |
AUDIO |
|
|
|
VIDEO |
|
|
|
|
COMPONENT IN |
|
ANTENNA IN |
CABLE IN |
|
8 |
|
|
9 |
10 |
1 |
|
|
7 |
|
11
<![if ! IE]><![endif]>4
2
12
AV IN2
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2 HDMI Input
Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
3RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4RGB IN Input
Connect the output from a PC.
5OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
6RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external device to these jacks.
Component Input
Connect a component video/audio device to these jacks.
Antenna Input
Connect RF antenna to this jack.
Cable Input
Connect cable signals to this jack.
USB IN Input
Connect USB storage device to this jack.
Audio/Video Input
Connect audio/video output from an external device to these jacks.
<![endif]>PREPARATION
9
PREPARATION
<![endif]>PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
Only 22/26LU5***
1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Only 32/37/42LH2***, 32/37/42/47LH4***, 42/47LH5***, 42/47LH9***
1 |
the TV screen side down on a cushioned |
|
|
|
the screen from damage. |
2 Fix the 2 or 3 bolts securely using the holes as |
2 |
TV as shown. |
shown. |
3 |
|
|
|
|
|
securely using the holes in the |
|
TV. |
|||||
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
ATTACHING THE TV TO A DESK
Only 26LU5***, 32/37/42LH2***, 32/37/42LH4***, 42LH5***, 42LH9***
■ Image shown may differ from your TV.
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
1-Screw (provided as parts of the product)
Stand |
Desk
DETACHING STAND
■ Here shown may be somewhat different from your TV.
Only 22/26LU5***
1Carefully place the TV screen ioned surface to protect the
2 |
Loose |
bolts and then |
|
TV. |
|
(Only 26LU5***)
3 Loose |
bolts and then |
|
||||||||||
Base |
T V. |
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
! WARNING
G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
Cover Base
(Only 26LU5***)
4Detach the Stand Body from T V.
Stand Body
<![endif]>PREPARATION
11
PREPARATION
<![endif]>PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■ Here shown may be somewhat different from your TV.
Only 32/37/42LH2***, |
Only 22/26LU5*** |
32/37/42/47/55LH4***, |
After Connecting the cables as necessary, install |
42/47LH5***, 42/47LH9*** |
CABLE HOLDER as shown and bundle the cables. |
|
1
External Equipment Setup section of the manual.
2 |
MENT CLIP as |
|
CABLE MANAGEMENT CLIP
3CABLE MANAGEMENT CLIP as
! NOTE
G Do not hold the CABLE MANAGEMENT CLIP when moving the TV.
-If the TV is dropped, you may be injured or the TV may be damaged.
12
NOT USING THE DESK-TYPE STAND
■ Here shown |
your TV. |
When installing |
use the |
Only 32/37/42LH2***,32/37/42/47/55LH4***,
42/47LH5***
Insert the PROTECTION COVER into the TV until clicking sound.
Only 42/47LH9***
After removing the protection paper from the protection cover, adhere it to the TV as shown.
SWIVEL STAND
(Except for 22/26LU5***)
■This feature is not available for all models.
■After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.
! NOTE
GThe following model is a fixed stand type model without the Tilt and Swivel features so excessive pressure may damage the set.
- 22/26LU5***
KENSINGTONSECURITYSYSTEM
■This feature is not available for all models.
■Image shown may differ from your TV.
The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a.If the TV feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with TV.
b.Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.
c.Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
<![endif]>PREPARATION
13
PREPARATION
<![endif]>PREPARATION
CAREFUL INSTALLATION ADVICE
A You should purchase necessary components to fix the TV safety and secure to the wall on the market.
A Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
1 |
|
1 |
|
2 |
2 |
|
|
1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
3
3Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
GWhen moving the TV undo the cords first.
GUse a platform or cabinet strong and large enough to support the size and weight of the TV.
GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
AThe TV can be installed in various ways such as on a wall, or on a desktop etc.
AThe TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOPPEDESTALINSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
4 inches |
4 inches |
|
14
WALL MOUNT: HORIZONTAL INSTALLATION
A We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.
A We recommend that you purchase a wall mounting bracket which supports VESA standard.
A LG recommends that wall mounting be performed by a qualified professional installer
! NOTE
GShould Install wall mount on a solid wall perpendicular to the floor
GShould use a special wall mount, if you want to install it to ceiling or slanted wall.
GThe surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.
GInstalling screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount.
GLG is not liable for any accidents or damage to property or TV due to incorrect installation:
-Where a non-compliant VESA wall mount is used.
-Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.
-Not following the recommended Installation method.
4 inches |
4 inches |
|
4 inches |
4 inches |
4 inches
A |
B |
Model |
VESA |
Standard |
Quantity |
||
|
(A * B) |
Screw |
|
|
|
26LU5*** |
200 * 100 |
M4 |
4 |
|
|
22LU5*** |
100 |
* 100 |
M4 |
4 |
|
42LH2*** |
200 |
* 200 |
M6 |
4 |
|
37LH2*** |
200 |
* 200 |
M6 |
4 |
|
32LH2*** |
200 * 100 |
M4 |
4 |
|
|
55LH4*** |
400 |
* 400 |
M6 |
4 |
|
47LH4*** |
200 |
* 200 |
M6 |
4 |
|
42LH4*** |
200 |
* 200 |
M6 |
4 |
|
37LH4*** |
200 |
* 200 |
M6 |
4 |
|
32LH4*** |
200 * 100 |
M4 |
4 |
|
|
42LH5*** |
200 |
* 200 |
M6 |
4 |
|
47LH5*** |
200 |
* 200 |
M6 |
4 |
|
42LH9*** |
200 |
* 200 |
M6 |
4 |
|
47LH9*** |
200 |
* 200 |
M6 |
4 |
|
|
|
|
|
|
|
<![endif]>PREPARATION
15
PREPARATION
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA OR CABLE CONNECTION
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
| <![if ! IE]> <![endif]>PREPARATION |
ON |
OFF |
|
|
Wall |
Multi-family Dwellings/Apartments |
|
(Connect to wall antenna socket) |
||
Antenna |
||
|
||
Socket |
|
RF Coaxial Wire (75 ohm)
UHF
Antenna |
Signal |
|
|
|
Amplifier |
|
ANTENNA IN |
|
VHF |
■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.
■If signal needs to be split for two TVs, use an antenna signal splitter for connection.
16
EXTERNAL EQUIPMENT SETUP
■To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47/55LH4*** models.
■Image shown may differ from your TV.
HD RECEIVER SETUP
■This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a component cable |
|
|
<![if ! IE]> <![endif]>EXTERNAL |
|
|
TV. |
|
|
|
1 |
Connect the video outputs (Y, PB, PR) of the digital set |
|
|
|
top box to the COMPONENT IN VIDEO jacks on the |
|
|
|
|
|
2 |
|
|
|
|
|
|
<![if ! IE]> <![endif]>EQUIPMENT |
|
|
the digital set-top box to |
1 |
|
|
|
|
|
||
|
VIDEO |
AUDIO |
|
|
|
|
|
||
|
the COMPONENT IN AUDIO jacks on the TV. |
COMPONENT IN |
|
|
|
Turn on the digital set-top box. |
|
|
<![if ! IE]> <![endif]>SETUP |
|
(Refer to the owner’s manual for the digital set-top box.) |
|
|
|
|
|
|
|
|
|
Select Component1 input source using the INPUT |
|
|
|
1 |
2 |
If connected to COMPONENT IN 2, select
Component2 input source.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal |
Component |
HDMI |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
480i/576i |
O |
X |
|
|
|
|
|
|
|
|
|
|
|
|
480p/576p |
O |
O |
|
|
|
|
|
|
|
|
|
|
|
|
720p/1080i |
O |
O |
|
|
|
|
|
|
|
|
|
|
|
|
1080p |
O |
O |
|
|
|
|
|
|
|
|
|
|
|
|
(50/60Hz only) |
(24Hz/30Hz/50Hz/60Hz) |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
EXTERNAL EQUIPMENT SETUP
<![endif]>SETUP EQUIPMENT EXTERNAL
Connecting a set-top box with an HDMI cable |
|
|
|
||
|
Connect the digital set-top box to HDMI/DVI IN 1, |
/DVI IN |
2 |
|
|
1 |
2 |
Y |
PB |
||
DMI IN 2, HDMI IN 3(Except for 22LU5***) or |
|||||
|
|||||
|
|
1 |
|
||
|
DMI IN 4(Only 42/47LH5***, 42/47LH9***, |
1(DVI) |
VID |
||
|
|
||||
|
42/47/55SL8***) jack on the TV. |
|
|
CO |
|
|
|
|
|
||
top box.
Refer to the owner’s manual for the digital set-top box.)
Select HDMI1, HDMI2, HDMI3(Except for 22LU5***)
HD
1
on the remote control.
! NOTE
G Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI version 1.3,
flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
Connecting with an HDMI to DVI cable |
|
/DVI IN |
(RGB/DVI) |
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
2 |
|
|
|
|
|
|
Y |
PB |
PR |
|
|
1(DVI) |
|
1 |
|
|
1 |
Connect the digital set-top box to HDMI/DVI IN |
1 |
|
COMPON |
||
|
|
|||||
|
|
|
|
|
VIDEO |
|
|
jack on the TV. |
|
|
|
|
|
|
output of the digital set-top box to |
|
|
|
|
|
|
/DVI) jack on the TV. |
|
|
|
|
|
|
|
|
1 |
2 |
|
|
|
Turn on the digital set-top box. (Refer to the owner’s |
|
|
|
|
|
|
manual for the digital set-top box.) |
|
|
|
|
|
|
Select HDMI1 input source using the INPUT button |
|
|
|
|
|
|
on the remote control. |
|
|
|
|
|
18
DVD SETUP |
|
|
|
Connecting with a component cable |
|
|
|
1 |
Connect the video outputs (Y, PB, PR) of the DVD to the |
2 |
|
|
COMPONENT IN VIDEO jacks on the TV. |
|
|
|
the audio outputs of the DVD to the |
1 |
|
|
VIDEO |
AUDIO |
|
|
PONENT IN AUDIO jacks on the TV. |
||
|
COMPONENT IN |
|
|
Turn on the DVD player, insert a DVD.
Select Component1 input source using the INPUT button on the remote control.
1 |
2 |
Refer to the DVD player's manual for operating instructions.
<![endif]>SETUP EQUIPMENT EXTERNAL
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV |
Y |
PB |
PR |
|
|
|
|
|
|
|
|
|
Y |
PB |
PR |
Video output ports |
Y |
B-Y |
R-Y |
on DVD player |
Y |
Cb |
Cr |
|
Y |
Pb |
Pr |
|
|
|
|
19
EXTERNAL EQUIPMENT SETUP
<![endif]>SETUP EQUIPMENT EXTERNAL
Connecting with a S-Video cable
Connect the S-VIDEO output of the DVD to the S -
1VIDEO input on the TV.
the audio outputs of the DVD to the AUDIO jacks on the TV.
Turn on the DVD player, insert a DVD.
Select AV1 input source using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
AUDIO IN |
VIDEO |
L/MONO AUDIO R |
RGB/DVI) |
|
<![if ! IE]> <![endif]>IN1AV |
|
|
2
Y 
PR L
1 |
|
|
|
|
|
|
AUDIO |
|
ANTENNA IN |
1 |
|
2 |
|
|
S-VIDEO |
VIDEO |
L |
R |
ANT IN |
|
|
|
|
|
OUTPUT |
ANT OUT |
|||
SWITCH |
|
|||
20
Connecting the HDMI cable
1Connect the HDMI output of the DVD to the HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3(Except for 22LU5***) or HDMI IN 4(Only 42/47LH5***, 42/47LH9***, 42/47/55SL8***) jack on the TV.
42/47/55SL8***) input source using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
!NOTE
G The TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
|
(RGB/DVI) |
|
|
/DVI IN |
2 |
|
|
2 |
Y |
PB |
PR |
1(DVI) |
1 |
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
COMPONE |
|
1 EXTERNALEQUIPMENT 
SETUP
21
EXTERNAL EQUIPMENT SETUP
<![endif]>SETUP EQUIPMENT EXTERNAL
VCR SETUP
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable
O AUDIO |
|
|
|
| <![if ! IE]> <![endif]>1 INAV |
|
|
|
R |
ANT OUT S-VIDEO VIDEO L R |
|
ANT OUT S-VIDEO VIDEO L R |
|
|
|
|
|
1 |
|
1 |
AUDIO |
CABLE IN |
|
ANTENNA IN CABLE IN |
ANTENNA IN |
or |
||
|
|
|
|
|
OUTPUT |
|
OUTPUT |
|
SWITCH |
|
SWITCH |
|
Wall Jack |
|
Wall Jack |
|
2 |
|
2 |
|
Antenna |
|
Antenna |
1Connect the ANT OUT socket of the VCR to the ANTENNA IN/CABLE IN socket on the TV.
the antenna cable to the ANT IN socket of the VCR.
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
22
Connecting with a RCA cable
1 |
and |
|
Left |
= white, and Audio Right = red)
2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
3Select AV1 input source using the INPUT button on the
If connected to AV IN 2, select AV2 input source.
AUDIO IN |
VIDEO |
L/MONO AUDIO R |
(RGB/DVI) |
|
<![if ! IE]> <![endif]>IN1AV |
|
|
2 
Y PB PR
1 |
|
|
VIDEO |
AUDIO |
ANTENNA IN |
COMPONENT IN
1
! NOTE
G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
S-VIDEO VIDEO |
L |
R |
ANT IN |
OUTPUT |
|
|
ANT OUT |
SWITCH |
|
|
|
<![endif]>SETUP EQUIPMENT EXTERNAL
23
EXTERNAL EQUIPMENT SETUP
<![endif]>SETUP EQUIPMENT EXTERNAL
Connecting with a S-Video cable
1 |
Connect the S-VIDEO output of the VCR to the S |
- |
|
VIDEO input on the TV set. The picture quality |
is AUDIO IN |
||
|
|||
|
improved; compared to normal composite (RCA cable) |
||
|
input. |
(RGB/DVI) |
|
|
|
||
|
|
2 |
|
|
outputs of the VCR to the AUDIO |
||
|
TV. |
Y |
|
|
1 |
||
|
|
||
VCR. (Refer to the VCR owner’s manual.)
Select AV1 input source with using the INPUT button on the remote control.
! NOTE
GIf both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.
VIDEO L/MONO AUDIO
P 
R L
1 |
AUDIO |
2 |
R AV
<![if ! IE]><![endif]>IN1
ANTENNA IN
S-VIDEO VIDEO |
L |
R |
ANT IN |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTPUT |
ANT OUT |
SWITCH |
|
24
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
1Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
cable to the digiequipment.
Set the “TV Speaker option - Off ” in the AUDIO
ment instruction manual for operation.
CAUTION
|
|
DIGITAL |
|
|
|
OUT |
|
|
|
RS-232C IN |
|
|
|
(CONTROL & SERVICE) |
|
AUDIO IN |
|
/MONO AUDIO |
|
(RGB/DVI) |
|
|
<![if ! IE]> <![endif]>1 INAV |
|
|
|
|
|
|
1 |
|
2 |
|
|
|
Y |
PB PR |
L |
R |
1 |
|
2 |
|
|
|
|
|
|
VIDEO |
AUDIO |
ANTENNA IN |
COMPONENT IN
GDo not look into the optical output port. Looking at the laser beam may damage your vision.
<![endif]>SETUP EQUIPMENT EXTERNAL
25
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
<![endif]>SETUP EQUIPMENT EXTERNAL
VIDEO L R
<![if ! IE]><![endif]>
IN 4
1
AV IN2
or
Camcorder
OPTICAL DIGITAL
AUDIO OUT
|
|
RS-232C IN |
|
|
(CONTROL & SERVICE) |
AUDIO IN |
VIDEO |
L/MONO AUDIO R |
(RGB/DVI) |
|
<![if ! IE]> <![endif]>IN1AV |
|
|
VIDEO L/MONO AUDIO R
2 |
|
|
|
Y |
PB |
|
|
1 |
|
|
|
|
VIDEO |
ANTENNA IN |
CABLE IN |
|
COMPONENT |
|
|
Video Game Set
VIDEO L R
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
1 |
O/VIDEO jacks between TV and external equipment. Match the jack colours . |
||||
|
(Video = yellow, Audio Left = white, and Audio Right = red) |
||||
2Select AV1 input source with using the INPUT button on the remote control. If connected to AV IN 2, select AV2 input source.
3Operate the corresponding external equipment. Refer to external equipment operating guide.
26
USB SETUP (Except for 22/26LU5***, 32/37/42LH2***)
1
<![if ! IE]><![endif]>
IN 3
1 Connect USB device to the USB IN jacks on the TV.
<![endif]>SETUP EQUIPMENT EXTERNAL
27
EXTERNAL EQUIPMENT SETUP
<![endif]>SETUP EQUIPMENT EXTERNAL
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable |
|
|
|
|
|
|
|
|
(PC) |
|
RS-232C IN |
|
|
|
(CONTROL & SERV |
||
1 |
Connect the RGB output of the PC to the RGB |
IN |
|
|
|
(PC) jack on the TV. |
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO IN |
OPTICAL DIGITAL |
|
|
|
|
(RGB/DVI) |
|
|
VI |
|
|
|
|
|
|
|
audio output to the AUDIO IN |
|
|
|
|
|
the TV. |
2 |
|
|
|
|
|
PB |
|
L |
R |
|
|
1 |
|
|
|
|
Turn on the PC and the TV. |
VIDEO |
|
AUDIO |
|
|
COMPONENT IN |
|
|||
|
|
|
|||
|
|
2 |
|
|
|
Select RGB input source using the INPUT button on the remote control.
AUDIO RGB OUTPUT
28
Loading...