LG 20EN33V, 22EN33V, 24EN33V, 24EN33VW User Guide

Download

Page 1

ENGLISH

OWNER’S MANUAL

LED LCD MONITOR

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD MONITOR MODEL

19EN33V 20EN33V 22EN33V 24EN33V 24EN33VW

www.lg.com

Page 2

ENGLISH

ENG

TABLE OF CONTENTS

3 ASSEMBLING AND PREPAR-

ING

3 Unpacking

4 Parts and buttons

5 Setting up the Monitor set

5 - Attaching the Stand Base

5 - Detaching the Stand Base

6 - Mounting on a table

6 - Using the cable holder

8 - Mounting on a wall

9 USING THE MONITOR SET

9 Connecting to a PC

9 - D-SUB connection

9 - DVI-D connection

9 - HDMI connection

11 CUSTOMIZING SETTINGS

12 Customizing Settings

12 - Menu Settings

13 - Picture

14 - Color

15 - Display

15 - Volume

16 - Others

17 MY KEY Setting

18 FUNC. Setting

18 - Picture Mode

19 - SUPER ENERGY SAVING

20 - DUAL DISPLAY

20 - DUAL WEB

21 - MY KEY Setting

22 TROUBLESHOOTING

24 SPECIFICATIONS

24 19EN33V

25 20EN33V

26 22EN33V

27 24EN33V/24EN33VW

28 Preset Modes (Resolution)

29 HDMI TIMING

29 Indicator

30 PROPER POSTURE

30 Proper posture for using the Monitor set.

Page 3

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

CD(Owner's Manual) /

Card

D-SUB Cable

DVI-D Cable

(This cable is not included

in all countries.)

ENGLISH

ENG

Power Cord AC-DC Adapter AC-DC Adapter

( Depending on the country ) ( Depending on the country )

Stand Body

Stand Base

CAUTION

Do not use any unapproved accessories to ensure the safety and product life span.

Any damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE

The accessories supplied with your product may vary depending on the model.

Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

Page 4

ENGLISH

ENG

ASSEMBLING AND PREPARING

Parts and buttons

Power Indicator

Lighting On: Turned on

Lighting Off: Turned off

Connection panel (See p.9)

(Power Button)

Button (See p.11)

Page 5

ASSEMBLING AND PREPARING

Setting up the Monitor set

Attaching the Stand Base

Place the Monitor set with the screen side

down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

Attach the

Tighten the screw to the right with a coin.

Stand Body Stand Base

to the monitor set.

Detaching the Stand Base

Place the Monitor set with the screen side

down on a flat and cushioned surface.

Pull out the

from the monitor set.

Turn the screw to the left with a coin. Pull out the

Stand Body

Stand Base

and

Stand Base

ENGLISH

ENG

Stand Body

Stand Base

Stand Body

Stand Base

CAUTION

This illustration depicts the general model of

connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding

only the stand base. The product may fall and get damaged or injure your foot.

Page 6

ASSEMBLING AND PREPARING

ENGLISH

ENG

Mounting on a table

Lift and tilt the Monitor set into its upright

position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

Press (Power) button on the bottom switch

panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

Connect the AC-DC Adapter and Power Cord

to a wall outlet.

Cable holder

Page 7

ASSEMBLING AND PREPARING

WARNING

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Do not touch or press the screen when adjusting the angle of the monitor.

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit

Connect the Kensington security system cable between the Monitor set and a table.

http://www.kensington.com

NOTE

ENGLISH

ENG

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

Front Rear

The Kensington security system is optional. You can obtain it from most electronics stores.

Page 8

ASSEMBLING AND PREPARING

ENGLISH

ENG

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

Please, Use the screw and wall mount interface

in accordance with VESA Standards.

If you use screw longer than standard, the

monitor might be damaged internally.

If you use improper screw, the product might be

damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

VESA compatible.

Please use VESA standard as below.

784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm

* Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

787.4 mm (31.0 inch) and above

* Please use VESA standard wall mount pad

and screws.

10 cm

Model

19EN33V

20EN33V

24EN33V

24EN33VW

22EN33V

VESA (A x B) Standard

screw Number of

screws

75 x 75 100 x 100

CAUTION

Disconnect the power cord first, and then

move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or

slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount

and contact the local dealer or qualified personnel. Do not over tighten the screws as this may

cause damage to the Monitor set and void your warranty. Use only screws and wall mounts that

meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

Use the screws that are listed on the VESA

standard screw specifications. The wall mount kit will include an installation

manual and necessary parts. The wall mount bracket is optional. You can

obtain additional accessories from your local dealer. The length of screws may differ depending

on the wall mount. Be sure to use the proper length. For more information, refer to the

instructions supplied with the wall mount.

Page 9

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

DVI-D connection

Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.

ENGLISH

ENG

NOTE

When using a D-Sub signal input cable

connector for Macintosh

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

HDMI connection

Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations.

NOTE

If you use HDMI PC, it can cause compatibility

problem.

Page 10

USING THE MONITOR SET

ENGLISH

ENG

CAUTION

Connect the signal

input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for

a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the

screen for a long period of time to prevent image burn. Use a screensaver if possible.

Self Image Setting Function

Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the " automatically. (Only supported in Analog Mode)

NOTE NOTE

When you want to use two PC in our Monitor,

please connect the signal cable(D-SUB/ DVI-D) respectively in Monitor set. If you turn the Monitor set on while it is cold,

the screen may flicker. This is normal. Some red, green, or blue spots may appear

on the screen. This is normal.

Self Image Setting

"Self Image Setting" Function.

This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)

‘AUTO’ Function.

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)

" Function is executed

Page 11

CUSTOMIZING SETTINGS

MY KEY

AUTO

INPUT

EXIT

FUNC.

CUSTOMIZING SETTINGS

Press the desired button on the bottom of the Monitor set.

Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Select

Exit

to leave the OSD menu.

Monitor set Buttons

ENGLISH

ENG

Button Description

Accesses the main menus.(See p.12)

(Power Button)

OSD Locked/OSD Unlocked

Use this button to enter MY KEY menu.For more information.(See p.17)

Use this button to enter Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB,MY KEY Setting menus.(See p.18)

When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)

The best display mode 19EN33V : 1366 x 768

You can choose the input signal.

• When two input signals are connected, you can select the input signal (D-SUB/DVI/

HDMI) you want.

• When only one signal is connected, it is automatically detected. The default setting is

D-SUB.

Exit

Exit the OSD(On Screen Display).

Turns the power on or off.

Power Indicator The power indicator stays red if the display is running properly

This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.

20EN33V : 1600 x 900 22EN33V/24EN33V/24EN33VW : 1920 x 1080

(On Mode). If the display is in Sleep Mode, the power indicator blinks red.

Page 12

ENGLISH

ENG

CUSTOMIZING SETTINGS

Customizing Settings

Menu Settings

Press

Set the options by pressing the ◄ or ► or ▼

to display the

button on the bottom of the Monitor set

OSD.

buttons.

Select the "

Next Menu

" button to enter the more

option settings.

Select

EXIT

to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu Analog Digital HDMI Description

Brightness

Contrast ● ● ●

Wide/Original

Reset

● ● ●

To adjust the brightness, contrast of the screen

Wide

Switch to full screen mode according to input image signal.

Original

Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9).

Restore all factory default settings. Press the immediately.

◄

, ►

buttons to reset

Menu > Next Menu Analog Digital HDMI Description

Picture Sharpness ● ● ●

Black Level ●

Over Scan ●

Color Gamma

Color Temp

Display Horizontal

Vertical

Clock

Phase

Volume

Others Language

Power Indicator

Analog:

Digital:

HDMI:

D-SUB(Analog signal) input.

DVI-D(Digital signal) input.

HDMI(Digital signal) input.

● ● ●

●

● ● ●

To adjust the clearness of the screen .

To set offset level

To improve the clarity and stability of the screen

To customize the color of the screen

To adjust the position of the screen

To improve the clarity and stability of the screen

●

To adjust the Volume

To customize the screen status for a user's operating environment

Page 13

Picture

Press

to display the

button on the bottom of the Monitor set

OSD.

CUSTOMIZING SETTINGS

ENGLISH

ENG

Select the "

option settings.

Enter to

Set the options by pressing the ◄ or ► or ▼

buttons.

Select

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Picture Description

Sharpness To adjust the clearness of the screen.

Black Level You can set the offset level. If you select 'High', the screen will be bright and if

Over Scan To select the range of output image for DTV timing in HDMI input.(only for HDMI

Next Menu

Picture

EXIT

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

you select ‘Low’, the screen will be dark.(only for HDMI input) * Offset?As the criteria for video signal, it is the darkest screen the monitor can show.

input)Recommend overscan function to turn on when connect AV equipment.

Page 14

ENGLISH

ENG

CUSTOMIZING SETTINGS

Color

Press

to display the

button on the bottom of the Monitor set

OSD.

Select the "

option settings.

Select

Enter to

Set the options by pressing the ◄ or ► or ▼

buttons.

Select

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Color Description

Gamma Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor,

Color Temp Custom

Next Menu

Color

by pressing the ► button.

Color

by pressing the ▼ button.

Exit

to leave the OSD menu.

" button to enter the more

high gamma values display whitish images and low gamma values display blackish images.

• Red:

Set your own red color levels.

• Green:

• Blue:

Select the screen color.

Warm: Medium: Cool:

Set your own green color levels.

Set your own blue color levels.

Set the screen to warm color temperature (more red).

Set the screen to medium color temperature.

Set the screen to cool color temperature (more blue).

Page 15

Display

Press

to display the

button on the bottom of the Monitor set

OSD.

CUSTOMIZING SETTINGS

ENGLISH

ENG

Select the "

option settings.

Select

Enter to

Set the options by pressing the ◄ or ► or ▼

buttons.

Select

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Display Description

Horizontal To move image left and right.

Vertical To move image up and down.

Clock To minimize any vertical bars or stripes visible on the screen background.The

Phase To adjust the focus of the display. This item allows you to remove any horizontal

Next Menu

Display

EXIT

by pressing the ► button.

Display

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

horizontal screen size will also change.

noise and clear or sharpen the image of characters.

Volume

Press

Select the "

Select

Enter to

Set the options by pressing the ◄ or ► buttons.

Select

Each option is explained below.

Volume To adjust the Volume of headphone/earphone.(Only for HDMI input)

button on the bottom of the Monitor set

to display the

option settings.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Menu > Next Menu > Volume Description

OSD.

Next Menu

Volume

EXIT

by pressing the ► button.

Volume

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

Page 16

CUSTOMIZING SETTINGS

ENGLISH

ENG

Others

Press

Select the "

Select

Enter to

Set the options by pressing the ◄ or ► or ▼

Select

Each option is explained below.

Language To choose the language in which the control names are displayed.

Power Indicator

button on the bottom of the Monitor set

to display the

option settings.

buttons.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Menu > Next Menu > Others Description

OSD.

Next Menu

Others

by pressing the ► button.

Others

Exit

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

Use this function to set the power indicator on the bottom side of the monitor to On or Off.If you set Off, it will go off. If you set On at any time, the power indicator will automatically be turned on.

Page 17

CUSTOMIZING SETTINGS

MY KEY Setting

Press

Set the options by pressing the ◄or►or▼buttons.

Select

Each option is explained below.

MY KEY

set to display the

Exit

button on the bottom of the Monitor

to leave the OSD menu.

MY KEY

OSD.

ENGLISH

ENG

MY KEY Description

MY KEY Setting MY KEY is short key. You can select one of FUNC. (Picture Mode, SUPER

Back Select Back to return MY KEY menu.

ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature.

Page 18

CUSTOMIZING SETTINGS

ENGLISH

ENG

FUNC. Setting

Picture Mode

Press

Enter to

Set the options by pressing the ◄ or ► buttons.

Select

FUNC.

button on the bottom of the Monitor set

to display the

upper menu or set other menu items, use the up

arrow( )button.

FUNC.

OSD.

Picture Mode

EXIT

to leave the OSD menu.To return to the

by pressing the ▼ button.

Each option is explained below.

Picture Mode Description

Custom It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

Text It is a mode that the screen is adjusted to the best for the textworks.

Photo It is a mode that the screen is adjusted to the best to view pictures.

Cinema It is a mode that the screen is adjusted to the best to view the videos.

Game It is a mode that the screen is adjusted to the best to play a game.

Picture Mode Description

Custom It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

Vivid 1 Adjusts the video image for the retail environment by enhancing the contrast, brightness, Colour,

Vivid 2

Standard Adjusts the image for the normal environment.

Cinema It is a mode that the screen is adjusted to the best to view the videos.

and sharpness.

Page 19

SUPER ENERGY SAVING

Press

FUNC.

display the

button on the bottom of the Monitor set to

FUNC.

OSD.

CUSTOMIZING SETTINGS

ENGLISH

ENG

Select

Enter to

Set the options by pressing the ◄ or ► or ▼buttons.

Select

Each option is explained below.

SUPER ENERGY SAVING Description

Off Disables SUPER ENERGY SAVING.

Reset Resets the values of total energy consumption reduction and CO2 emission reduction

SUPER ENERGY SAVING

button.

SUPER ENERGY SAVING

button.

Exit

to leave the OSD menu.To return to the

upper menu or set other menu items, use the up arrow

( ) button.

by pressing the ►

by pressing the ▼

Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function

estimates.

NOTE

TOTAL POWER REDUCTION

TOTAL CO2 REDUCTION

SAVING DATA(W/h)

SUPER SAVING 3 W/h 4 W/h 5 W/h 6 W/h

: How much power is saved while using the monitor.

: Change the TOTAL POWER REDUCTION to CO2.

470 mm

(18.5 inch)

508 mm

(20 inch)

546 mm

(21.5 inch)

(23.6 inch)

600 mm

Saving Data depends on the Panel. So,those values should be different from each panel and panel

vendor. LG calculated these values by using

(including broadcast video: IEC 62087)

SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING

function.

“broadcast video signal”

Page 20

ENGLISH

ENG

CUSTOMIZING SETTINGS

* Before using below functions, please install DUAL SMART SOLUTION programme.

DUAL DISPLAY

Press

Select

Enter to

Set the options by pressing the ◄ or ► buttons.

Select

Each option is explained below.

Clone By selecting Clone,user can use secondary monitor as done mode of primary monitor.

Extended By selecting Extended,user can use secondary monitor as extended mode of primary

Off If select Off,DUAL DISPLAY is off.

* Before using below functions, please install DUAL SMART SOLUTION programme.

FUNC.

button on the bottom of the Monitor set

to display the

upper menu or set other menu items, use the up

arrow ( ) button.

DUAL DISPLAY Description

FUNC.

OSD.

DUAL DISPLAY

Exit

to leave the OSD menu.To return to the

by pressing the ► button.

by pressing the ▼ button.

monitor.

DUAL WEB

Press

FUNC.

to display the

button on the bottom of the Monitor set

FUNC.

OSD.

Select

Enter to

Set the options by pressing the ◄ or ► buttons.

Select

Each option is explained below.

On Help user to browse web efficiently by dividing in half. Help to arrange and move

Off If select Off,DUAL WEB is off.

DUAL WEB

Exit

to leave the OSD menu.To return to the

upper menu or set other menu items, use the up

arrow ( ) button.

DUAL WEB Description

by pressing the ► button.

by pressing the ▼ button.

windowson screen. Help user to control dividedwindows ratio.

NOTE

When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD

appear and user should press dual button -> User can bring back to normal mode.

Page 21

MY KEY Setting

Press

FUNC.

set to display the

button on the bottom of the Monitor

FUNC.

OSD.

TROUBLESHOOTING

ENGLISH

ENG

Select

Enter to

Set the options by pressing the ◄ or ► buttons.

Select

Each option is explained below.

Picture Mode Picture Mode adjust the Monitor set for the best picture appearance.

SUPER ENERGY SAVING Enables SUPER ENERGY SAVING you can save energy with this energy-effcient

DUAL DISPLAY User can use Clone or Extended in another monitor.

DUAL WEB Help user to browse web efficiently by dividing in half and some other convenience in

MY KEY Setting

Exit

to leave the OSD menu.To return to

the upper menu or set other menu items, use

the up arrow ( ) button.

MY KEY Setting Description

by pressing the ► button.

by pressing the ▼ button.

function.

browsing dual pages.

Page 22

TROUBLESHOOTING

ENGLISH

ENG

TROUBLESHOOTING

Check the following before calling for service.

No image appears

Is the power cord of the display connected?

Is the power indicator light on?

Is the power on and the power indicator Red?

Is the power indicator flickering?

Do you see an "OUT OF RANGE" message on the screen?

Do you see a "NO SIGNAL" message on the screen?

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD LOCKED” when you push MENU button?

yCheck and see if the power cord is connected properly to the power

outlet.

yPress the Power button.

yAdjust the brightness and the contrast.

yIf the display is in power saving mode, try moving the mouse or

pressing any key on the keyboard to bring up the screen.

yTry to turn on the PC.

yThis message appears when the signal from the PC (video card) is

out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.

yWhen the monitor is on "No-Signal" in 5 minutes, the monitor goes to

DPM mode.

yYou can secure the current control settings, so that they cannot be

inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.

Display image is incorrect

Display Position is incorrect.

On the screen background, vertical bars or stripes are visible.

Any horizontal noise appearing in any image or characters are not clearly portrayed.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yCheck

Control Panel ► Display ► Settings

and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).

Page 23

TROUBLESHOOTING

CAUTION

Control Panel ► Display ► Settings

Check

changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the

screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned

above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

Display image is incorrect

The screen color is mono or abnormal.

The screen blinks.

yCheck if the signal cable is properly connected and use a screwdriver

to fasten if necessary. yMake sure the video card is properly inserted in the slot. ySet the color setting higher than 24 bits (true color) at

► Settings

yCheck if the screen is set to interlace mode and if yes, change it to the

recommend resolution.

and see if the frequency or the resolution were

Control Panel

ENGLISH

ENG

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Have you installed the display driver?

The screen is flickering.

Did you select the recommended resolution?

yBe sure to install the display driver from the display driver CD (or

diskette) that comes with your display. Or, you can also download the

driver from our web site: http://www.lg.com. yMake sure to check if the video card supports Plug&Play function.

yIf the selected resolution is HDMI

be flickering. Change the resolution to the recommended resolution

1080P

1080i

60/50 Hz, the screen may

Page 24

SPECIFICATIONS

ENGLISH

ENG

SPECIFICATIONS

19EN33V

Display Screen Type 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCDAnti-

Glare coating Visible diagonal size: 47.0 cm

Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch)

Sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic)

Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)

Input Form Separate Sync. Digital

Video Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)

Input Form RGB Analog (0.7 Vp-p/ 75 ohm),Digital

Resolution Max D-SUB(Analog) : 1366 x 768 @ 60 Hz

Recommend VESA 1366 x 768 @ 60 Hz

Plug & Play DDC 2B(Analog,Digital,HDMI)

Power Consumption

Power Input 19 V 1.2 A

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 1.9 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 18 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand 44.1 cm x 34.9 cm x 16.8 cm

Without Stand 44.1 cm x 27.5 cm x 5.5 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

19 V 1.3 A

56Hz to 61Hz(HDMI)

HDMI Connector

DVI/HDMI (Digital) : 1366 x 768 @ 60 Hz

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Page 25

SPECIFICATIONS

20EN33V

Display Screen Type

Pixel Pitch

Sync Input Horizontal Frequency

Vertical Frequency

Input Form

Video Input Signal Input

Input Form

Resolution Max

Recommend

Plug & Play

Power Consumption

Power Input

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

DDC 2B(Analog,Digital,HDMI)

On Mode : 20 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

19 V 1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand

Without Stand

2.3 kg

-5° to 20°

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

19 V 1.3 A

ENGLISH

ENG

50.8 cm (20 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 50.8 cm

0.276 mm x 0.276 mm (Pixel Pitch)

30 kHz to 83 kHz (Automatic)

56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz(HDMI)

Separate Sync. Digital

15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector

RGB Analog (0.7 Vp-p/ 75 ohm),Digital

D-SUB(Analog) : 1600 x 900 @ 60 Hz DVI/HDMI(Digital) : 1600 x 900 @ 60 Hz

VESA 1600 x 900 @ 60 Hz

47.4 cm x 36.6 cm x 16.8 cm

47.4 cm x 29.2 cm x 5.5 cm

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Page 26

SPECIFICATIONS

ENGLISH

ENG

SPECIFICATIONS

22EN33V

Display Screen Type

Pixel Pitch

Sync Input Horizontal Frequency

Vertical Frequency

Input Form

Video Input Signal Input

Input Form

Resolution Max

Recommend

Plug & Play

Power Consumption

Power Input

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

DDC 2B(Analog,Digital,HDMI)

On Mode : 23 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

19 V 1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand

Without Stand

2.6 kg

-5° to 20°

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

19 V 1.3 A

54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 54.6 cm

0.247 mm x 0.247 mm (Pixel Pitch)

30 kHz to 83 kHz (Automatic)

56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz(HDMI)

Separate Sync. Digital

15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI/HDMI(Digital) : 1920 x 1080 @ 60 Hz

VESA 1920 x 1080 @ 60 Hz

50.9 cm x 38.7 cm x 18.1 cm

50.9 cm x 31.3 cm x 5.5 cm

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Page 27

SPECIFICATIONS

24EN33V/24EN33VW

Display Screen Type

Pixel Pitch

Sync Input Horizontal Frequency

Vertical Frequency

Input Form

Video Input Signal Input

Input Form

Resolution Max

Recommend

Plug & Play

Power Consumption

Power Input

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

DDC 2B(Analog,Digital,HDMI)

On Mode : 25 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

19 V 1.6 A

Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT:

With Stand

Without Stand

2.8 kg

-5° to 20°

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

19 V 1.7 A

ENGLISH

ENG

60.0 cm (23.6 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 60.0 cm

0.272 mm x 0.272 mm (Pixel Pitch)

30 kHz to 83 kHz (Automatic)

56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz(HDMI)

Separate Sync. Digital

15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI/HDMI(Digital) : 1920 x 1080 @ 60 Hz

VESA 1920 x 1080 @ 60 Hz

55.6 cm x 41.7 cm x 18.1 cm

55.6 cm x 34.1 cm x 5.5 cm

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Page 28

ENGLISH

ENG

SPECIFICATIONS

Preset Modes (Resolution)

19EN33V

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

832 x 624 49.725 75 -/-

1024 x 768 48.363 60 -/-

1366 x 768 47.712 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

20EN33V

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 +/+

1152 x 864 67.500 75 +/+

1600 x 900 60.000 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

Page 29

SPECIFICATIONS

Preset Modes (Resolution)

22EN33V/24EN33V/24EN33VW

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 +/+

1152 x 864 67.500 75 +/+

1280 x 1024 63.981 60 +/+

1280 x 1024 79.976 75 +/+

1680 x 1050 65.290 60 -/+

1920 x 1080 67.500 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

ENGLISH

ENG

HDMI TIMING

Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz)

480P 31.50 60

576P 31.25 50

720P 37.50 50

720P 45.00 60

1080i 28.12 50

1080i 33.75 60

1080P 56.25 50

1080P 67.50 60 Recommend Mode

Indicator

Mode LED Color

On Mode Red

Sleep Mode Blinking Red

Off Mode Off

Page 30

PROPER POSTURE

ENGLISH

PROPER POSTURE

ENG

Proper posture for using the Monitor set.

allow you to view

Place your hands

keyboard, keeping

your arms bent at

horizontally outright.

Adjust the

Monitor set and

your posture to

images at the

optimal viewing

angle.

gently on the

the elbows and

Adjust the location of the Monitor set to avoid it reflecting light.

Page 31

Declaration of Conformity

Trade Name: LG Model : 19EN33VA,20EN33VA, 22EN33VA,24EN33VA Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534

*above information is only for USA FCC Regulatory

Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.

MODEL

SERIAL

ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA).

As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efﬁciency.

LG 20EN33V, 22EN33V, 24EN33V, 24EN33VW User Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

OWNER’S MANUAL

CONTENTS

ASSEMBLING AND PREPARING

Unpacking

Parts and buttons

Setting up the Monitor set

Attaching the Stand Base

Detaching the Stand Base

Mounting on a table

Using the cable holder

Mounting on a wall

USING THE MONITOR SET

Connecting to a PC

D-SUB connection

DVI-D connection

HDMI connection

CUSTOMIZING SETTINGS

CUSTOMIZING SETTINGS

Menu Settings

Picture

Color

Display

Volume

Others

MY KEY Setting

FUNC. Setting

Picture Mode

SUPER ENERGY SAVING

DUAL DISPLAY

DUAL WEB

MY KEY Setting

TROUBLESHOOTING

SPECIFICATIONS

19EN33V

20EN33V

22EN33V

24EN33V/24EN33VW

Preset Modes (Resolution)

HDMI TIMING

Indicator

PROPER POSTURE

Proper posture for using the Monitor set.