OWNER’S MANUAL
Colour Television
Please read this manual carefully before operating your set. Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this information to your dealer when you require service.
Model number |
: |
Serial number |
: |
P/NO :MFL67059805-EN (CW81C)(1011-REV00) |
www.lg.com |
Contents
Installation.......................................................... |
2 |
|
Connection of external equipment.................. |
2 |
|
Location and function of controls................... |
2 |
|
Basic |
operation................................................. |
4 |
Other |
functions................................................. |
4 |
On screen menus.............................................. |
5 |
Setting up TV stations....................................... |
5 |
Picture adjustment............................................. |
6 |
Time setting........................................................ |
6 |
Sound adjustment (option)............................... |
6 |
Troubleshooting check list................................ |
7 |
Installation
Power |
electric shock. |
This set operates on an AC mains supply, the volt- |
Service |
age is as indicated on the label on the back cover. Never remove the back cover of the set as this
Never apply DC power to the set. In the event of |
can expose you to very high voltage and other |
thunderstorms or powercuts, please pull out the |
hazards. If the set does not operate properly, |
aerial and mains plugs. |
unplug it and call your dealer. |
Press the POWER button on the front panel or side |
Aerial |
panel to turn off the TV when the TV set is not being |
Connect the aerial cable to the socket on the back |
used for a long time.It is recommended to remove the |
cover. For the best reception an outdoor aerial |
plug from the wall outlet(Power point). |
should be used. |
Disconnecting device from mains |
Location |
Mains plug is the disconnecting device. The plug |
Position your set so that no bright light or sunlight |
must remain readily operable. |
falls directly onto the screen. Care should be |
Warning |
taken not to expose the set to any unnecessary |
To prevent fire or shock hazard, do not expose the |
vibration, moisture, dust or heat. Also ensure that |
set to rain or moisture. |
the set is placed in a position to allow a free flow |
Do not place anything containing liquid on top of |
of air. Do not cover the ventilation openings on the |
the set, this may cause a fire or could give an |
back cover. |
Connection of external equipment
Aerial socket
1.Connect the RF out socket of the VCR to the aerial socket on the back of the set.
2.Connect the aerial cable to the RF aerial in socket of the VCR.
3.Store the VCR channel on the programme
number 0 using the ‘Manual programme tuning’ section.
4.Select the programme number where the VCR channel is stored.
5.Press the PLAY button on the VCR.
Audio/Video in/out sockets (option)
1.Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set.
2.If the VCR is connected to the AV sockets on the set, press the TV/AV button to select AV
(or AV1), or AV 2.
3.Press the PLAY button on the VCR.
You can also record programmes received by the TV on video tape via audio/video out
sockets.
Component in sockets (option)
1.Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the DVD player to the COMPONENT INPUT sockets (Y PB PR) on the set.
2.Connect the audio cable from the DVD player to AUDIO IN sockets of AV (or AV1).
3.Press the TV/AV button to select COMPONENT.
4.Press the PLAY button on the DVD player.
The COMPONENT playback picture appears on the screen.
Headphone socket (option)
You can listen to the sound through the headphones. To adjust the headphone volume, press
the F / G button.
If you press the MUTE button, the sound from the headphone’s is switched off.
Location and function of controls
Front panel
-MAIN POWER (ON/OFF) switches the set on or off.
-POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby mode.
dims when the set is switched on.
-REMOTE CONTROL SENSOR
Note : Only use the supplied remote control handset. (When you use others, they will not be able to function.)
-MENU
selects a menu.
-OK
accepts your selection or displays the current
mode.
F / G (Volume Down/Up) adjusts the volume. adjusts menu settings.
D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby.
2
|
|
|
|
Location and function of controls |
|
|||
Remote control handset |
|
|
||||||
Before you use the remote control handset, please install the bat- |
|
|
||||||
teries. See the next page. |
1 |
|
||||||
1. |
POWER |
|
|
|
||||
|
switches the set on from standby or off to standby. |
8 |
|
|||||
2. |
NUMBER BUTTONS |
5 |
||||||
|
||||||||
|
switches the set on from standby or directly select a number. |
|
||||||
|
|
|
||||||
3. |
MENU |
|
|
|
|
10 |
||
|
selects a menu. |
|
|
|
||||
4. |
D / E (Programme Up/Down) |
|
|
|||||
|
selects a programme or a menu item. |
|
|
|||||
|
switches the set on from standby. |
2 |
|
|||||
|
scans programmes automatically. |
|
||||||
|
F / G (Volume Up/Down) |
|
|
|||||
|
adjusts the volume. |
|
|
|||||
|
adjusts menu settings. |
|
|
|||||
|
OK |
|
|
|
|
3 |
9 |
|
|
accepts your selection or displays the current mode. |
|
|
|||||
5. |
Q.VIEW |
|
|
|
|
|||
|
returns to the previously viewed programme. |
|
|
|||||
6. |
EYE/ |
|
(option) |
|
|
|
||
|
switches* |
the eye function on or off. |
4 |
|
||||
7. |
SLEEP (option) |
|
|
|||||
|
sets the sleep timer. |
|
|
|||||
8. |
MUTE |
|
|
|
|
|
||
|
switches the sound on or off. |
|
|
|||||
9. |
TV/AV |
|
|
|
|
12 |
||
|
selects TV or AV mode. |
|
||||||
|
switches the set on from standby. |
7 |
6 |
|||||
10. |
LIST/ |
|
(option) |
|
||||
|
displays* |
the programme table. |
11 |
|
||||
11. |
FAVOURITE / |
(option) |
|
|
||||
|
selects a favorite* programme. |
|
|
|||||
12. |
I/II/ |
(option) |
|
|
|
|||
|
selects* |
the language during dual language broadcast. |
|
|
||||
|
selects the sound output. |
|
|
|||||
* : No function |
|
|
|
|||||
Battery installation |
|
|
||||||
The remote control handset is powered by AAA type batteries. To |
|
|
||||||
load the batteries, turn the remote control handset over and open |
or |
|
||||||
the battery compartment. Install batteries as indicated by the |
|
|||||||
|
|
|||||||
polarity symbols ( + and - ) marked inside the compartment. |
|
|
||||||
Note : To avoid damage from possible battery leakage, remove |
|
|
||||||
the batteries if you do not plan to use the remote control handset |
|
|
||||||
for an extended period of time. |
|
|
3