Setting up TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the
D
/
E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note : In some models up to 200 TV stations can be stored.
Auto programme tuning
All stations that can be received are stored by this method. It is rec-
ommended that you use auto programme during installation of this set.
1. Press the MENU button to select the Station menu.
2. Press the
G
button and then
D
/
E
button to select Auto prog..
3. Press the
G
button to display the Auto prog. menu.
4. Press the
G
button. Select a TV system with the
D
/
E
button
on the
System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I : (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
5. Press the OK or
F
button.
6. Press the
D
/
E
button to select Storage.
7.
Press the
G
button. Select the beginning programme number
with the
F
/
G
button or NUMBER buttons on the Storage
from
pull-down menu. Any number under 10 is entered with a
numeric ‘
0’ (or
‘00’
) in front of it, i.e. ‘05’ (or
‘005’
) for 5.
8. Press the OK button.
9. Press the
D
/
E
button to select Normal or Turbo.
Option: In some models, you can only select Start.
Note :
a.
Turbo is faster than Normal and in some models, these
searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the
Manual menu.
10. Press the
G
button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the
Prog. edit menu
appears on the screen. See the ‘Programme edit’ section to edit
the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.