LG 21FG6RG User Manual [ru]

P/NO : MFL42008501(CP-079A,REV. 02)

CONTENTS

Important Precautions 3

Location and function of controls 5

Remote control handset/ Front panel

Basic operation 7

On and Off / Programme selection Volume adjustment / Mute function On screen language selection (option)

On screen menus 8

Menu selection

Setting up TV stations 9

Auto programme tuning / Manual programme tuning Assigning a programme name / Fine tuning Programme edit / Deleting a programme /Copying a programme Moving a programme / Skipping a programme number Favourite programme / Callling The Programme Selecting programme in the programme table Paging thgrough a programme table

Picture adjustment 14

PSM/ /(Picture Status Memory) / Turbo picture Picture adjustment / Eye (option)

Sound adjustment (option) 16

SSM (Sound Status Memory) /Sound frequency adjustment (Equalizer) Balance adjustment / Sound output selection

Other functions 17

Blue back / AVL (Auto Volume Leveler) / Music Mode (option) / Time functions On/Off Time / On Time / Auto sleep / Sleep timer / On screen language selection (option) TV and AV modes (option) / Child lock

Connection of external equipment 21

Aerial socket / Audio Video in/out sockets (option) Euro scart socket (option) / Component in sockets (option) Headphone socket (option)

Troubleshooting check list 23

Important Precautions

This unit has been engineered and manufactured to assure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing. Keep it in an accessible place for future reference.

On Safety

The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is easily accessible after installation. Operate the TV set only from a power source indicated in the specifications of this manual or

listed on the TV set. If you are not sure what type of power supply you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

Hands must be dry when holding the power plug to avoid an electric shock.

Do not damage the power cord by disassembling, bending, pulling or heating up, it can cause fire or electric shock.

Make sure to completely insert the power plug. Insecure connections can cause fire.

Do not Open the TV set

There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the TV is not operating properly.

To Avoid Personal Injury :

Do not place the TV set on a sloping shelf unless properly secured.

Use only fixed wooden stand. The TV shall be positioned 5cm behind the front edge of an open fronted with 1cm free space along the sides top and 5cm depth behind the TV.

Do not try to roll a stand with small casters across thresholds or deep pile

carpets.

To Prevent Fire or Hazards:

Always turn the TV set OFF if you leave the room for more than a short period

of time. Never leave the TV set ON when leaving the house.

Keep children from dropping or pushing objects into the TV cabinet

openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this TV set.

During a lighting storm or when the TV set is to be left unattended for an

extended period of time, unplug it from the wall outlet and external socket.

Do not bring magnetic devices such as magnets or motors near the picture tube.

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the TV set where the power cord is subject to damage.

Power

This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.

Service

Do not attempt to service the TV set yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Aerial

ßµj  Ñ…Ý• º2³ h FYå` ¶j ìÿtóhÞ_Õ†ÿ} ÕŠ¬Í ‚¹7 Þ“¼Þ•ÏB•·öŽC¸ò⇓ß8í_ÝV} þ° e‡• ! s„ ËËmâLX×Lq õ©^±ðhë ø- aÔç™ ß8¨, á• ½r &mè• R{’ C#›ñ¥Z "’  È=¾pÈ} 2

Location

Do not use this TV near water such as near bathtub, washbowl, kitchen sink, laundary tub, in a wet basement, or near a swimming pool. TV set are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore,

The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table cloths, curtains, etc.

Never place the TV set in a built-in enclosure unless proper ventilation is provided. No naked flame source such as lighted candles should be placed on the TV. Never place the TV set near or over a radiator or heat source. Position your set so that no bright light or sunlight falls directly onto the screen.

On Cleaning

Unplug the TV set before cleaning the face of the TV screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the TV screen because overspray may cause electric shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

Caution:

stabilizer. Use of Inferior quality stabilizer may damage the set.

Please do not use stabilizer with TV set as this set has inbuilt voltage

Battery installation

The remote control handset is powered by two AA/AAA type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and - ) marked inside the compartment.

Note: To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the Remote control handset for an extended period of time.

15 13

Location and function of controls

All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set.

Remote control handset

Before you use the remote control handset, please install the batteries. See the previous page.

1. POWER

switches the set from On to standby or standby to On.

2. NUMBER BUTTONS

switches the set On from standby or directly select a Programme number.

3. MENU

POWER

PSM

EYE/*

ARC/*

MUTE

SSM

Q.VIEW

LIST

SLEEP

VOL

TV/AV

FAVOURITE

MM/*

TURBO PICTURE/*

I/II/*

selects a menu.

4. EYE/ (option)

switches the eye function On or Off.

5. / (Programme Up/Down) selects a programme or a menu item. switches the set On from standby.

(Volume Up/Down)

adjusts the volume. adjusts menu settings. OK accepts your selection or displays the current mode.

6. Q. VIEW returns to the previously viewed programme.

7. PSM (Picture Status Memory)

recalls your preferred picture setting.

8. TURBO PICTURE/*

Select turbo picture.

9. MUTE

switches the sound On or Off.

10. TV/AV

selects TV or AV mode.

clears the menu / text from the screen. switches the set On from Standby.

11. I/II/ (option)

selects the language during dual language broadcast. (option)

selects the sound output.

12. LIST

displays the programme table. press LIST key again to clear the LIST table from the screen.

13. SLEEP

sets the sleep timer.

14. SSM/* (option) (Sound Status Memory) recalls your preferred sound setting.

15. ARC/* (option) change picture format (Normal/Zoom).

16. FAVOURITE pressing each time this button will select a stored

favourite programme.

17. MM/* (option)

select music mode.

COLOURED BUTTONS : When Menu is On some of these buttons are used

for programme edit.

Remarks : 1. Some keys in remote can be non-functional, these keys are used in other models. 2. Keys marked * are non functional.

Location and function of controls

FRONT PANEL / SIDE PANEL (Option)

Shown below is a simplified representation of front or side panel,here shown may be somewhat different from your set.

Common

(L/MONO)-AUDIO-(R)

VIDEO

7 8

OK /

VOL

OK /

VOL

(Common)

AUDIO

L/MONO

VIDEO

1. MAIN POWER (ON/OFF)

ON/OFF

2 3

OK /

ON/OFF

OK /

4 5B

VOL VOL

FOR 21FD5 SERIES

FOR 21FE4 series

FOR 15Q9 SERIES

VOL

5B 5A

switches the set On or Off.

2. POWER/STANDBY INDICATOR Illuminates brightly when the set is in standby mode dims when the set is switched On

3. REMOTE CONTROL SENSOR

4. MENU selects a menu.

5A. OK /

It accepts your selection when it is in menu. Otherwise it selects input (TV or AV)

5B. (Volume Up/Down) adjusts the volume. adjusts menu settings. (Programme Up/Down) selects a programme or a menu item. switches On the set from standby.

6. AUDIO/VIDEO IN SOCKETS (AV) (option)

Connect the audio/video out sockets of external equipment to these sockets.

Note : a. If audio input is only L or R select L+L or R+R through I/II/* key on remote control. b. Avoid giving input at Lout or Rout socket on the back of the set.

7. HEADPHONE SOCKET (option) Connect the headphone plug to this socket.

8. EYE (option) adjusts picture according to the surrounding conditions.

On screen menus

The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed.

Menu selection

1. Press the MENU button and then button to display each menu.

2. Press the button and then button to select a menu item.

3. Press the button to display the sub menu or the pull-down menu.

4 Change the setting of an item in the sub or pull-down

menu with or .

POWER

PSM

EYE/*

SLEEP

VOL

TV/AV

FAVOURITE

MUTE

ARC/*

Q.VIEW

SSM

LIST

VOL

You can move to the higher level menu with OK button and to move to the lower level menu press the button.

Note :

a. In the AV mode the Programme Menu is not displayed. b. In mono models the Sound Menu does not appear. c. In sound menu woofer is optional (In some models)

Programme

Picture

Turbo Picture

Auto programme

Manual programme

I/II/*

TURBO PICTURE/*

Sound

MM/*

Time

Programme edit

Special

Basic operation

On and Off

1. Press the main power button to switch the set On.

2. If the set is in standby mode, press the POWER, TV/AV or

NUMBER buttons on the remote control handset to switch it On

fully.

3. Press the POWER button on the remote control handset.

The set reverts to standby mode.

4. Press the main power button again to switch the set Off.

Note : while the set is switched On and mains plug is disconnected, if mains plugged again then set will switch to standby or power On.

POWER

PSM

EYE/*

SLEEP

VOL

TV/AV

FAVOURITE

MUTE

ARC/*

Q.VIEW

SSM

LIST

Programme selection

You can select a programme number with the or NUMBER Buttons.

Volume adjustment

Press the button to adjust the volume.

Quick view Press the Q.VIEW button to view the last programme

Mute function

Press the MUTE button. The sound is switched Off and the display appears. You can cancel it by pressing the MUTE, , SSM button.

On screen language selection (option)

VOL

The menu can be displayed on the screen in desired language. First select your language.

1. Press the Menu button and then button to select the special menu.

2. Press the button after selecting language by pressing button.

3. Press the button to selects the desired language.

All the On screen display will appear in the selected language.

4. Press the MENU button to return to normal TV viewing.

MM/*

TURBO PICTURE/*

I/II/*

+ 16 hidden pages