LG 19EN33S, 24EN33S, 23EN33S, 19EN33SW, 22EN33S User Manual

ENGLISH

OWNER’S MANUAL

LED LCD MONITOR

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD MONITOR MODEL

19EN33S 19EN33SW 20EN33SS 20EN33S

22EN33S 23EN33S 24EN33S

www.lg.com

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

ENGLISH

ENG

TABLE OF CONTENTS

2

ASSEMBLING AND PREPARING

3

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

CD(Owner's Manual) /

Card

D-SUB Cable

or

ENGLISH

ENG

Power Cord AC-DC Adapter AC-DC Adapter

( Depending on the country ) ( Depending on the country )

Stand Body

Stand Base

CAUTION

Do not use any unapproved accessories to ensure the safety and product life span.

y

Any damages or injuries by using unapproved accessories are not covered by the warranty.

y

NOTE

The accessories supplied with your product may vary depending on the model.

y

Product specifications or contents in this manual may be changed without prior notice due to upgrade

y

of product functions.

ENGLISH

ENG

ASSEMBLING AND PREPARING

4

Parts and buttons

Power Indicator

Lighting On: Turned on

y

Lighting Off: Turned off

y

Connection panel (See p.9)

(Power Button)

Button (See p.11)

ASSEMBLING AND PREPARING

5

Setting up the Monitor set

Attaching the Stand Base

Place the Monitor set with the screen side

1

down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

1

Attach the

2

Attach the

2

Tighten the screw to the right with a coin.

3

Stand Body Stand Base

to the monitor set.

.

Detaching the Stand Base

Place the Monitor set with the screen side

1

down on a flat and cushioned surface.

2

1

Pull out the from the monitor set.

2

Turn the screw to the left with a coin. Pull out the

3

Stand Body

Stand Base

and

.

Stand Base

ENGLISH

ENG

Stand Body

Stand Base

Stand Body

Stand Base

ASSEMBLING AND PREPARING

6

ENGLISH

ENG

Mounting on a table

Lift and tilt the Monitor set into its upright

1

position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

Press (Power) button on the bottom switch

3

panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

Connect the AC-DC Adapter and Power Cord

2

to a wall outlet.

or

Cable holder

ASSEMBLING AND PREPARING

7

WARNING

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Do not touch or press the screen when adjusting the angle of the monitor.

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit

Connect the Kensington security system cable between the Monitor set and a table.

http://www.kensington.com

.

NOTE

ENGLISH

ENG

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

Front Rear

The Kensington security system is optional. You can obtain it from most electronics stores.

ASSEMBLING AND PREPARING

8

ENGLISH

ENG

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

Please, Use the screw and wall mount interface

1

in accordance with VESA Standards.

10 cm

Model

19EN33S

20EN33S

22EN33S19EN33SW

20EN33SS 23EN33S

VESA (A x B) 75 x 75 Standard screw M4 Number of screws 4

Model

VESA (A x B) 100 x 100 Standard screw M4 Number of screws 4

24EN33S

CAUTION

Disconnect the power cord first, and then

y

move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or

y

slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount

y

and contact the local dealer or qualified personnel. Do not over tighten the screws as this may

y

cause damage to the Monitor set and void your warranty. Use only screws and wall mounts that

y

meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

If you use screw longer than standard, the

2

monitor might be damaged internally.

If you use improper screw, the product might be

3

damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

VESA compatible.

4

Please use VESA standard as below.

5

784.8 mm (30.9 inch) and under

y

* Wall Mount Pad Thickness : 2.6 mm

* Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

787.4 mm (31.0 inch) and above

y

* Please use VESA standard wall mount pad

and screws.

NOTE

Use the screws that are listed on the VESA

y

standard screw specifications. The wall mount kit will include an installation

y

manual and necessary parts. The wall mount bracket is optional. You can

y

obtain additional accessories from your local dealer. The length of screws may differ depending

y

on the wall mount. Be sure to use the proper length. For more information, refer to the

y

instructions supplied with the wall mount.

USING THE MONITOR SET

9

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports Plug & Play*.

y

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

NOTE

When using a D-Sub signal input cable

y

connector for Macintosh

Mac adapter

y

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

ENGLISH

ENG

USING THE MONITOR SET

10

ENGLISH

ENG

CAUTION

Connect the signal input cable

y

and tighten it by turning the screws clockwise. Do not press the screen with your

y

finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the

y

screen for a long period of time to prevent image burn. Use a screensaver if possible.

NOTE

If you turn the Monitor set on while it is cold,

y

the screen may flicker. This is normal. Some red, green, or blue spots may appear

y

on the screen. This is normal.

Self Image Setting Function

Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the " automatically. (Only supported in Analog Mode)

Self Image Setting

" Function is executed

NOTE

"Self Image Setting" Function.

y

This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)

‘AUTO’ Function.

y

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)

CUSTOMIZING SETTINGS

MENU

MY KEY

AUTO

INPUT

EXIT

FUNC.

11

CUSTOMIZING SETTINGS

Press the desired button on the bottom of the Monitor set.

1

Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.

2

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Select

3

EXIT

to leave the OSD menu.

Monitor set Buttons

ENGLISH

ENG

Button Description

Accesses the main menus.(See p.12)

(Power Button)

OSD Locked/OSD Unlocked

Use this button to enter MY KEY menu.For more information.(See p.17)

Use this button to enter Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB,MY KEY Setting menus.(See p.18)

When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)

The best display mode

EXIT

EXIT the OSD(On Screen Display).

Turns the power on or off.

Power Indicator

This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.

19EN33S 1366 x 768 19EN33SW 1440 x 900 20EN33S/20EN33SS 1600 x 900 22EN33S/23EN33S/24EN33S 1920 x 1080

The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red.

ENGLISH

ENG

CUSTOMIZING SETTINGS

12

Customizing Settings

Menu Settings

Press

1

Set the options by pressing the ◄ or ► or ▼

2

MENU

to display the

button on the bottom of the Monitor set

Menu

OSD.

buttons.

Select the "

3

Next Menu

" button to enter the more

option settings.

Select

4

EXIT

to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu Description

Brightness

Contrast

Wide/Original Wide

Reset

To adjust the brightness, contrast of the screen

Switch to full screen mode according to input image signal.

Original

Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9).

Restore all factory default settings. Press the

buttons to reset immediately.

, ►

◄

Menu > Next Menu Description

Picture

Color Gamma

Display Horizontal

Others Language

Sharpness

Color Temp

Vertical

Clock

Phase

Power Indicator

To adjust the clearness of the screen .

To customize the color of the screen

To adjust the position of the screen

To improve the clarity and stability of the screen

To customize the screen status for a user's operating environment

Picture

Press

1

to display the

MENU

button on the bottom of the Monitor set

Menu

OSD.

CUSTOMIZING SETTINGS

13

ENGLISH

ENG

Select the "

2

option settings.

Enter to

3

Set the options by pressing the ◄ or ► or ▼

4

buttons.

Select

5

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Picture Description

Sharpness

Next Menu

Picture

EXIT

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

To adjust the clearness of the screen.

ENGLISH

ENG

CUSTOMIZING SETTINGS

14

Color

Press

1

MENU

to display the

button on the bottom of the Monitor set

Menu

OSD.

Select the "

2

option settings.

Select

3

Enter to

4

Set the options by pressing the ◄ or ► or ▼

5

buttons.

Select

6

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Color Description

Gamma

Color Temp Custom

Next Menu

Color

by pressing the ► button.

Color

by pressing the ▼ button.

EXIT

to leave the OSD menu.

" button to enter the more

Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images.

• Red:

Set your own red color levels.

• Green:

• Blue:

Select the screen color.

Warm: Medium: Cool:

Set your own green color levels.

Set your own blue color levels.

Set the screen to warm color temperature (more red).

Set the screen to medium color temperature.

Set the screen to cool color temperature (more blue).

Display

Press

1

to display the

MENU

button on the bottom of the Monitor set

Menu

OSD.

CUSTOMIZING SETTINGS

15

ENGLISH

ENG

Select the "

2

option settings.

Select

3

Enter to

4

Set the options by pressing the ◄ or ► or ▼

5

buttons.

Select

6

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

Menu > Next Menu > Display Description

Horizontal

Vertical

Clock

Phase

Next Menu

Display

EXIT

by pressing the ► button.

Display

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

To move image left and right.

To move image up and down.

To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.

To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

CUSTOMIZING SETTINGS

16

ENGLISH

ENG

Others

Press

1

Select the "

2

Select

3

Enter to

4

Set the options by pressing the ◄ or ► or ▼

5

Select

6

Each option is explained below.

Language

Power Indicator

MENU

button on the bottom of the Monitor set

to display the

option settings.

buttons.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Menu > Next Menu > Others Description

Menu

OSD.

Next Menu

Others

by pressing the ► button.

Others

EXIT

to leave the OSD menu.

" button to enter the more

by pressing the ▼ button.

To choose the language in which the control names are displayed.

Use this function to set the power indicator on the bottom side of the monitor to On or Off.If you set Off, it will go off. If you set On at any time, the power indicator will automatically be turned on.

CUSTOMIZING SETTINGS

17

MY KEY Setting

Press

1

Set the options by pressing the ◄or►or▼buttons.

2

Select

3

Each option is explained below.

MY KEY

set to display the

EXIT

button on the bottom of the Monitor

to leave the OSD menu.

MY KEY

OSD.

ENGLISH

ENG

MY KEY Description

MY KEY Setting

Back

MY KEY is short key. You can select one of FUNC. (Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature.

Select Back to return MY KEY menu.

CUSTOMIZING SETTINGS

18

ENGLISH

ENG

FUNC. Setting

Picture Mode

Press

1

Enter to

2

Set the options by pressing the ◄ or ► buttons.

3

Select

4

Each option is explained below.

Custom

Text

Photo

Cinema

Game

FUNC.

button on the bottom of the Monitor set

to display the

upper menu or set other menu items, use the up

arrow( )button.

Picture Mode Description

FUNC.

OSD.

Picture Mode

EXIT

to leave the OSD menu.To return to the

by pressing the ▼ button.

It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

It is a mode that the screen is adjusted to the best for the textworks.

It is a mode that the screen is adjusted to the best to view pictures.

It is a mode that the screen is adjusted to the best to view the videos.

It is a mode that the screen is adjusted to the best to play a game.

SUPER ENERGY SAVING

Press

1

FUNC.

display the

button on the bottom of the Monitor set to

FUNC.

OSD.

CUSTOMIZING SETTINGS

19

ENGLISH

ENG

Select

2

Enter to

3

Set the options by pressing the ◄ or ► or ▼buttons.

4

Select

5

Each option is explained below.

SUPER ENERGY SAVING Description

On

Off

Reset

SUPER ENERGY SAVING

button.

SUPER ENERGY SAVING

button.

EXIT

to leave the OSD menu.To return to the

upper menu or set other menu items, use the up arrow

( ) button.

by pressing the ►

by pressing the ▼

Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function

Disables SUPER ENERGY SAVING.

Resets the values of total energy consumption reduction and CO2 emission reduction estimates.

NOTE

TOTAL POWER REDUCTION

y

TOTAL CO2 REDUCTION

y

SAVING DATA(W/h)

y

470 mm

(18.5 inch)

SUPER SAVING

: How much power is saved while using the monitor.

: Change the TOTAL POWER REDUCTION to CO2.

482 mm

(19 inch)

3 W/h 3 W/h 4 W/h 4 W/h 5 W/h 6 W/h 6 W/h

494 mm

(19.5 inch)

508 mm

(20 inch)

(21.5 inch)

546 mm

584 mm

(23 inch)

600 mm

(23.6 inch)

Saving Data depends on the Panel. So,those values should be different from each panel and panel

y

vendor. LG calculated these values by using

y

(including broadcast video: IEC 62087)

SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING

y

function.

“broadcast video signal”

ENGLISH

ENG

CUSTOMIZING SETTINGS

20

* Before using below functions, please install DUAL SMART SOLUTION programme.

DUAL DISPLAY

Press

1

Select

2

Enter to

3

Set the options by pressing the ◄ or ► buttons.

4

Select

5

Each option is explained below.

Clone

Extended

Off

* Before using below functions, please install DUAL SMART SOLUTION programme.

FUNC.

to display the

upper menu or set other menu items, use the up

arrow ( ) button.

DUAL DISPLAY Description

button on the bottom of the Monitor set

FUNC.

OSD.

DUAL DISPLAY

EXIT

to leave the OSD menu.To return to the

by pressing the ► button.

by pressing the ▼ button.

By selecting Clone,user can use secondary monitor as done mode of primary monitor.

By selecting Extended,user can use secondary monitor as extended mode of primary monitor.

If select Off,DUAL DISPLAY is off.

DUAL WEB

Press

1

FUNC.

to display the

button on the bottom of the Monitor set

FUNC.

OSD.

Select

2

Enter to

3

Set the options by pressing the ◄ or ► buttons.

4

Select

5

Each option is explained below.

On

Off

DUAL WEB

EXIT

upper menu or set other menu items, use the up

arrow ( ) button.

DUAL WEB Description

by pressing the ► button.

by pressing the ▼ button.

to leave the OSD menu.To return to the

Help user to browse web efficiently by dividing in half. Help to arrange and move windowson screen. Help user to control dividedwindows ratio.

If select Off,DUAL WEB is off.

NOTE

When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD

y

appear and user should press dual button -> User can bring back to normal mode.

MY KEY Setting

Press

1

FUNC.

set to display the

button on the bottom of the Monitor

FUNC.

OSD.

CUSTOMIZING SETTINGS

21

ENGLISH

ENG

Select

2

Enter to

3

Set the options by pressing the ◄ or ► buttons.

4

Select

5

Each option is explained below.

Picture Mode

SUPER ENERGY SAVING

DUAL DISPLAY

DUAL WEB

MY KEY Setting

EXIT

to leave the OSD menu.To return to

the upper menu or set other menu items, use

the up arrow ( ) button.

MY KEY Setting Description

by pressing the ► button.

by pressing the ▼ button.

Picture Mode adjust the Monitor set for the best picture appearance.

Enables SUPER ENERGY SAVING you can save energy with this energy-effcient function.

User can use Clone or Extended in another monitor.

Help user to browse web efficiently by dividing in half and some other convenience in browsing dual pages.

SPECIFICATIONS

22

ENGLISH

ENG

TROUBLESHOOTING

Check the following before calling for service.

No image appears

Is the power cord of the display connected?

Is the power indicator light on?

Is the power on and the power indicator Red?

Is the power indicator flickering?

Do you see an "OUT OF RANGE" message on the screen?

Do you see a "NO SIGNAL" message on the screen?

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD LOCKED” when you push MENU button?

yCheck and see if the power cord is connected properly to the power

outlet.

yPress the Power button.

yAdjust the brightness and the contrast.

yIf the display is in power saving mode, try moving the mouse or

pressing any key on the keyboard to bring up the screen.

yTry to turn on the PC.

yThis message appears when the signal from the PC (video card) is

out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.

yWhen the monitor is on "No-Signal" in 5 minutes, the monitor goes to

DPM mode.

yYou can secure the current control settings, so that they cannot be

inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.

Display image is incorrect

Display Position is incorrect.

On the screen background, vertical bars or stripes are visible.

Any horizontal noise appearing in any image or characters are not clearly portrayed.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yPress the

AUTO

button to automatically adjust your display image to

the ideal setting.

yCheck

Control Panel ► Display ► Settings

and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).

SPECIFICATIONS

CAUTION

Control Panel ► Display ► Settings

Check

y

changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the

y

screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned

y

above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

Display image is incorrect

The screen color is mono or abnormal.

The screen blinks.

yCheck if the signal cable is properly connected and use a screwdriver

to fasten if necessary. yMake sure the video card is properly inserted in the slot. ySet the color setting higher than 24 bits (true color) at

► Settings

yCheck if the screen is set to interlace mode and if yes, change it to the

recommend resolution.

and see if the frequency or the resolution were

Control Panel

.

23

ENGLISH

ENG

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Have you installed the display driver?

yBe sure to install the display driver from the display driver CD (or

diskette) that comes with your display. Or, you can also download the

driver from our web site: http://www.lg.com. yMake sure to check if the video card supports Plug&Play function.

SPECIFICATIONS

24

ENGLISH

ENG

SPECIFICATIONS

19EN33S

Display Screen Type

Pixel Pitch

Sync Input Horizontal Frequency

Vertical Frequency

Input Form

Video Input Signal Input

Input Form

Resolution Max

Recommend

Plug & Play

Power Consumption

Power Input

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

DDC 2B(Analog)

On Mode : 18 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

19 V 1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand

Without Stand

1.9 kg

-5° to 20°

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

19 V 1.3 A

TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating

47.0 cm visible diagonal (18.5 inch)

0.3 mm x 0.3 mm (Pixel Pitch)

30 kHz to 61 kHz (Automatic)

56Hz to 75Hz (D-SUB)

Separate Sync.

15 pin D-SUB Connector

RGB Analog (0.7 Vp-p/ 75 ohm)

D-SUB(Analog) : 1366 x 768 @ 60 Hz

VESA 1366 x 768 @ 60 Hz

44.1 cm x 34.9 cm x 16.8 cm

44.1 cm x 27.5 cm x 5.5 cm

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

25

SPECIFICATIONS

19EN33SW

Display Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display)

Panel,Anti-Glare coating

48.2 cm visible diagonal (19 inch)

Pixel Pitch 0.283 mm x 0.283 mm (Pixel Pitch)

Sync Input Horizontal Frequency 30 kHz to 71 kHz (Automatic)

Vertical Frequency 56Hz to 75Hz (D-SUB)

Input Form Separate Sync.

Video Input Signal Input 15 pin D-SUB Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Resolution Max D-SUB(Analog) : 1440 x 900 @ 75 Hz

Recommend VESA 1440 x 900 @ 60 Hz

Plug & Play DDC 2B(Analog)

Power Consumption

Power Input 19 V 1.2 A

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 2.0 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 13 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand 44 cm x 37.4 cm x 16.8 cm

Without Stand 44 cm x 30 cm x 5.7 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

19 V 1.3 A

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

ENGLISH

ENG

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

26

ENGLISH

ENG

SPECIFICATIONS

20EN33SS

Display Screen Type

Pixel Pitch

Sync Input Horizontal Frequency

Vertical Frequency

Input Form

Video Input Signal Input

Input Form

Resolution Max

Recommend

Plug & Play

Power Consumption

Power Input

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

DDC 2B(Analog)

On Mode : 20 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

19 V 1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A, manufactured by LG Innotek Co,,Ltd or Type PSAB-L202B, manufactured by LG Innotek Co,,Ltd or Type PSAB-L202C, manufactured by LG Innotek Co,,Ltd or Type PSAB-L202D, manufactured by LG Innotek Co,,Ltd

OUTPUT:

With Stand

Without Stand

2.2 kg

-5° to 20°

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

Attached ( ). Detached (O)

Wall-outlet type

19 V 1.3 A

TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating

49.4 cm visible diagonal (19.5 inch)

0.271 mm x 0.262 mm (Pixel Pitch)

30 kHz to 83 kHz (Automatic)

56Hz to 75Hz (D-SUB)

Separate Sync.

15 pin D-SUB Connector

RGB Analog (0.7 Vp-p/ 75 ohm)

D-SUB(Analog) : 1600 x 900 @ 60 Hz

VESA 1600 x 900 @ 60 Hz

46.3 cm x 35.7 cm x 16.8 cm

46.3 cm x 28.6 cm x 5.7 cm

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

27

SPECIFICATIONS

20EN33S

Display Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display)

Panel,Anti-Glare coating

50.8 cm visible diagonal (20 inch)

Pixel Pitch 0.276 mm x 0.276 mm (Pixel Pitch)

Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)

Vertical Frequency 56Hz to 75Hz (D-SUB)

Input Form Separate Sync.

Video Input Signal Input 15 pin D-SUB Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Resolution Max D-SUB(Analog) : 1600 x 900 @ 60 Hz

Recommend VESA 1600 x 900 @ 60 Hz

Plug & Play DDC 2B(Analog)

Power Consumption

Power Input 19 V 1.2 A

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 2.3 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ), Detached (O)

Power cord Wall-outlet type

On Mode : 20 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand 47.4 cm x 36.6 cm x 16.8 cm

Without Stand 47.4 cm x 29.2 cm x 5.5 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

19 V 1.3 A

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

ENGLISH

ENG

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

28

ENGLISH

ENG

SPECIFICATIONS

22EN33S

Display Screen Type

Pixel Pitch

Sync Input Horizontal Frequency

Vertical Frequency

Input Form

Video Input Signal Input

Input Form

Resolution Max

Recommend

Plug & Play

Power Consumption

Power Input

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

DDC 2B(Analog)

On Mode : 23 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

19 V 1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2,manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A,manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B,manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C,manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D,manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand

Without Stand

2.6 kg

-5° to 20°

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

19 V 1.3 A

TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating

54.6 cm visible diagonal (21.5 inch)

0.248 mm x 0.248 mm (Pixel Pitch)

30 kHz to 83 kHz (Automatic)

56Hz to 75Hz (D-SUB)

Separate Sync.

15 pin D-SUB Connector

RGB Analog (0.7 Vp-p/ 75 ohm)

D-SUB(Analog) : 1920 x 1080 @ 60 Hz

VESA 1920 x 1080 @ 60 Hz

50.9 cm x 38.7 cm x 18.1 cm

50.9 cm x 31.3 cm x 5.5 cm

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

29

SPECIFICATIONS

23EN33S

Display Screen Type

Pixel Pitch

Sync Input Horizontal Frequency

Vertical Frequency

Input Form

Video Input Signal Input

Input Form

Resolution Max

Recommend

Plug & Play

Power Consumption

Power Input

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

DDC 2B(Analog)

On Mode : 24 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

19 V 1.3 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type PSAB-L203A,manufactured by LG Innotek Co.,Ltd or Type PSAB-L202B,manufactured by LG Innotek Co.,Ltd or Type PSAB-L202C,manufactured by LG Innotek Co.,Ltd or Type PSAB-L202D,manufactured by LG Innotek Co.,Ltd

OUTPUT:

With Stand

Without Stand

2.9 kg

-5° to 20°

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

19 V 1.3 A

ENGLISH

ENG

TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating

58.4 cm visible diagonal (23 inch)

0.265 mm x 0.265 mm (Pixel Pitch)

30 kHz to 83 kHz (Automatic)

56 Hz to 75 Hz (D-SUB)

Separate Sync.

15 pin D-SUB Connector

RGB Analog (0.7 Vp-p/ 75 ohm)

D-SUB(Analog) : 1920 x 1080 @ 60 Hz

VESA 1920 x 1080 @ 60 Hz

54.4 cm x 40.6 cm x 18.1 cm

54.4 cm x 33.2 cm x 5.5 cm

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

30

ENGLISH

ENG

SPECIFICATIONS

24EN33S

Display Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display)

Panel,Anti-Glare coating

60.0 cm visible diagonal (23.6 inch)

Pixel Pitch 0.272 mm x 0.272 mm (Pixel Pitch)

Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)

Vertical Frequency 56 Hz to 75 Hz (D-SUB)

Input Form Separate Sync.

Video Input Signal Input 15 pin D-SUB Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

Plug & Play DDC 2B(Analog)

Power Consumption

Power Input 19 V 1.3 A

AC-DC Adapter

Dimensions (Width x Height x Depth)

Weight 2.8 kg

Tilt Range -5° to 20°

Environmental conditions

Stand Base Attached ( ). Detached (O)

Power cord Wall-outlet type

On Mode : 25 W(Typ.)

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W

Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT:

With Stand 55.6 cm x 41.7 cm x 18.1 cm

Without Stand 55.6 cm x 34.1 cm x 5.5 cm

Operating Temperature Operating Humidity

Storage Temperature Storage Humidity

19 V 1.7 A

10°C to 35 °C 10 % to 80 %

-20°C to 60 °C 5 % to 90 % non-Condensing

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

Preset Modes (Resolution)

19EN33S

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

832 x 624 49.725 75 -/-

1024 x 768 48.363 60 -/-

1366 x 768 47.712 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

19EN33SW

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 -/-

1440 x 900 55.500 60 +/-

1440 x 900 55.935 60 -/+ Recommend Mode

1440 x 900 70.635 75 -/+

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

31

ENGLISH

ENG

20EN33S/20EN33SS

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 +/+

1152 x 864 67.500 75 +/+

1600 x 900 60.000 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

ENGLISH

ENG

SPECIFICATIONS

32

22EN33S/23EN33S/24EN33S

Display Modes (Resolution)

720 x 400 31.468 70 -/+

640 x 480 31.469 60 -/-

640 x 480 37.500 75 -/-

800 x 600 37.879 60 +/+

800 x 600 46.875 75 +/+

1024 x 768 48.363 60 -/-

1024 x 768 60.023 75 +/+

1152 x 864 67.500 75 +/+

1280 x 1024 63.981 60 +/+

1280 x 1024 79.976 75 +/+

1680 x 1050 65.290 60 -/+

1920 x 1080 67.500 60 +/+ Recommend Mode

Horizontal Frequency(kHz)

Vertical Frequency(Hz)

Polarity(H/V)

Indicator

Mode LED Color

On Mode Red

Sleep Mode Blinking Red

Off Mode Off

PROPER POSTURE

33

PROPER POSTURE

Proper posture for using the Monitor set.

Adjust the

Monitor set and

your posture to

allow you to view

images at the

optimal viewing

angle.

Place your hands

gently on the

keyboard, keeping

your arms bent at

the elbows and

horizontally outright.

ENGLISH

ENG

Adjust the location of the Monitor set to avoid it reflecting light.

Declaration of Conformity

Trade Name: LG Model : 19EN33SA, 19EN33SWA 20EN33SSA, 20EN33SA 22EN33SA, 23EN33SA 24EN33SA Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534

*above information is only for USA FCC Regulatory

Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.

MODEL

SERIAL

LG 19EN33S, 24EN33S, 23EN33S, 19EN33SW, 22EN33S User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

OWNER’S MANUAL

CONTENTS

ASSEMBLING AND PREPARING

Unpacking

Parts and buttons

Setting up the Monitor set

Attaching the Stand Base

Detaching the Stand Base

Mounting on a table

Using the cable holder

Mounting on a wall

USING THE MONITOR SET

Connecting to a PC

D-SUB connection

CUSTOMIZING SETTINGS

CUSTOMIZING SETTINGS

Menu Settings

Picture

Color

Display

Others

MY KEY Setting

FUNC. Setting

Picture Mode

SUPER ENERGY SAVING

DUAL DISPLAY

DUAL WEB

MY KEY Setting

TROUBLESHOOTING

SPECIFICATIONS

19EN33S

19EN33SW

20EN33SS

20EN33S

22EN33S

23EN33S

24EN33S

Preset Modes (Resolution)

Indicator

PROPER POSTURE

Proper posture for using the Monitor set.