LG 15LC1R-ZG Service Manual

LCD TV

SERVICE MANUAL

CAUTION

BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

CHASSIS : CL-81

MODEL : 15LC1R-ZG

website:http://biz.LGservice.com

e-mail:http://www.LGEservice.com/techsup.html

- 2 -

CONTENTS

CONTENTS .............................................................................................. 2

PRODUCT SAFETY ..................................................................................3

DISASSEMBLY..........................................................................................6

SPECIFICATION........................................................................................7

ADJUSTMENT INSTRUCTION ...............................................................12

SERVICE OSD.........................................................................................14

SVC REMOCON ......................................................................................15

TROUBLE SHOOTING............................................................................16

BLOCK DIAGRAM...................................................................................20

WIRING DIAGRAM..................................................................................22

EXPLODED VIEW .................................................................................. 23

REPLACEMENT PARTS LIST ............................................................... 25

SVC. SHEET ...............................................................................................

- 3 -

SAFETY PRECAUTIONS

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the
Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent
Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used during the
servicing of a receiver whose chassis is not isolated from the AC
power line. Use a transformer of adequate power rating as this
protects the technician from accidents resulting in personal injury
from electrical shocks.

It will also protect the receiver and it's components from being
damaged by accidental shorts of the circuitry that may be
inadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this TV receiver is blown,
replace it with the specified.

When replacing a high wattage resistor (Oxide Metal Film Resistor,
over 1W), keep the resistor 10mm away from PCB.

Keep wires away from high voltage or high temperature parts.

Before returning the receiver to the customer,

always perform an AC leakage current check on the exposed
metallic parts of the cabinet, such as antennas, terminals, etc., to
be sure the set is safe to operate without damage of electrical
shock.

Leakage Current Cold Check(Antenna Cold Check)

With the instrument AC plug removed from AC source, connect an
electrical jumper across the two AC plug prongs. Place the AC
switch in the on position, connect one lead of ohm-meter to the AC
plug prongs tied together and touch other ohm-meter lead in turn to
each exposed metallic parts such as antenna terminals, phone
jacks, etc.
If the exposed metallic part has a return path to the chassis, the
measured resistance should be between 1MΩ and 5.2MΩ.
When the exposed metal has no return path to the chassis the
reading must be infinite.
An other abnormality exists that must be corrected before the
receiver is returned to the customer.

Leakage Current Hot Check (See below Figure)

Plug the AC cord directly into the AC outlet.

Do not use a line Isolation Transformer during this check.

Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
and the exposed metallic parts.
Measure the AC voltage across the resistor using AC voltmeter
with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC voltage
measurements for each exposed metallic part. Any voltage
measured must not exceed 0.75 volt RMS which is corresponds to

0.5mA.
In case any measurement is out of the limits specified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.

Leakage Current Hot Check circuit

IMPORTANT SAFETY NOTICE

0.15uF

To Instrument's
exposed
METALLIC PARTS

AC Volt-meter

Good Earth Ground
such as WATER PIPE,
CONDUIT etc.

1.5 Kohm/10W

- 4 -

CAUTION: Before servicing receivers covered by this service
manual and its supplements and addenda, read and follow the

SAFETY PRECAUTIONS on page 3 of this publication.
NOTE: If unforeseen circumstances create conflict between the

following servicing precautions and any of the safety precautions on
page 3 of this publication, always follow the safety precautions.
Remember: Safety First.

General Servicing Precautions

1. Always unplug the receiver AC power cord from the AC power
source before;
a. Removing or reinstalling any component, circuit board

module or any other receiver assembly.

b. Disconnecting or reconnecting any receiver electrical plug or

other electrical connection.

c. Connecting a test substitute in parallel with an electrolytic

capacitor in the receiver.
CAUTION: A wrong part substitution or incorrect polarity
installation of electrolytic capacitors may result in an
explosion hazard.

2. Test high voltage only by measuring it with an appropriate high
voltage meter or other voltage measuring device (DVM,
FETVOM, etc) equipped with a suitable high voltage probe.
Do not test high voltage by "drawing an arc".

3. Do not spray chemicals on or near this receiver or any of its
assemblies.

4. Unless specified otherwise in this service manual, clean
electrical contacts only by applying the following mixture to the
contacts with a pipe cleaner, cotton-tipped stick or comparable
non-abrasive applicator; 10% (by volume) Acetone and 90% (by
volume) isopropyl alcohol (90%-99% strength)
CAUTION: This is a flammable mixture.
Unless specified otherwise in this service manual, lubrication of
contacts in not required.

5. Do not defeat any plug/socket B+ voltage interlocks with which
receivers covered by this service manual might be equipped.

6. Do not apply AC power to this instrument and/or any of its
electrical assemblies unless all solid-state device heat sinks are
correctly installed.

7. Always connect the test receiver ground lead to the receiver
chassis ground before connecting the test receiver positive
lead.
Always remove the test receiver ground lead last.

8. Use with this receiver only the test fixtures specified in this

service manual.

CAUTION: Do not connect the test fixture ground strap to any
heat sink in this receiver.

Electrostatically Sensitive (ES) Devices

Some semiconductor (solid-state) devices can be damaged easily
by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES
devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques
should be used to help reduce the incidence of component
damage caused by static by static electricity.

1. Immediately before handling any semiconductor component or
semiconductor-equipped assembly, drain off any electrostatic
charge on your body by touching a known earth ground.
Alternatively, obtain and wear a commercially available
discharging wrist strap device, which should be removed to

prevent potential shock reasons prior to applying power to the
unit under test.

2. After removing an electrical assembly equipped with ES
devices, place the assembly on a conductive surface such as
aluminum foil, to prevent electrostatic charge buildup or
exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES
devices.

4. Use only an anti-static type solder removal device. Some solder
removal devices not classified as "anti-static" can generate
electrical charges sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate
electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective
package until immediately before you are ready to install it.
(Most replacement ES devices are packaged with leads
electrically shorted together by conductive foam, aluminum foil
or comparable conductive material).

7. Immediately before removing the protective material from the
leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be
installed.
CAUTION: Be sure no power is applied to the chassis or circuit,
and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged
replacement ES devices. (Otherwise harmless motion such as
the brushing together of your clothes fabric or the lifting of your
foot from a carpeted floor can generate static electricity
sufficient to damage an ES device.)

General Soldering Guidelines

1. Use a grounded-tip, low-wattage soldering iron and appropriate
tip size and shape that will maintain tip temperature within the
range or 500

o

F to 600oF.

2. Use an appropriate gauge of RMA resin-core solder composed
of 60 parts tin/40 parts lead.

3. Keep the soldering iron tip clean and well tinned.

4. Thoroughly clean the surfaces to be soldered. Use a mall wire­bristle (0.5 inch, or 1.25cm) brush with a metal handle.
Do not use freon-propelled spray-on cleaners.

5. Use the following unsoldering technique
a. Allow the soldering iron tip to reach normal temperature.

(500

o

F to 600oF)
b. Heat the component lead until the solder melts.
c. Quickly draw the melted solder with an anti-static, suction-

type solder removal device or with solder braid.
CAUTION: Work quickly to avoid overheating the
circuitboard printed foil.

6. Use the following soldering technique.
a. Allow the soldering iron tip to reach a normal temperature

(500

o

F to 600oF)

b. First, hold the soldering iron tip and solder the strand against

the component lead until the solder melts.

c. Quickly move the soldering iron tip to the junction of the

component lead and the printed circuit foil, and hold it there
only until the solder flows onto and around both the
component lead and the foil.
CAUTION: Work quickly to avoid overheating the circuit
board printed foil.

d. Closely inspect the solder area and remove any excess or

splashed solder with a small wire-bristle brush.

SERVICING PRECAUTIONS

- 5 -

IC Remove/Replacement

Some chassis circuit boards have slotted holes (oblong) through
which the IC leads are inserted and then bent flat against the
circuit foil. When holes are the slotted type, the following technique
should be used to remove and replace the IC. When working with
boards using the familiar round hole, use the standard technique
as outlined in paragraphs 5 and 6 above.

Removal

1. Desolder and straighten each IC lead in one operation by gently
prying up on the lead with the soldering iron tip as the solder
melts.

2. Draw away the melted solder with an anti-static suction-type
solder removal device (or with solder braid) before removing the
IC.

Replacement

1. Carefully insert the replacement IC in the circuit board.

2. Carefully bend each IC lead against the circuit foil pad and
solder it.

3. Clean the soldered areas with a small wire-bristle brush.
(It is not necessary to reapply acrylic coating to the areas).

"Small-Signal" Discrete Transistor
Removal/Replacement

1. Remove the defective transistor by clipping its leads as close as
possible to the component body.

2. Bend into a "U" shape the end of each of three leads remaining
on the circuit board.

3. Bend into a "U" shape the replacement transistor leads.

4. Connect the replacement transistor leads to the corresponding
leads extending from the circuit board and crimp the "U" with
long nose pliers to insure metal to metal contact then solder
each connection.

Power Output, Transistor Device
Removal/Replacement

1. Heat and remove all solder from around the transistor leads.

2. Remove the heat sink mounting screw (if so equipped).

3. Carefully remove the transistor from the heat sink of the circuit
board.

4. Insert new transistor in the circuit board.

5. Solder each transistor lead, and clip off excess lead.

6. Replace heat sink.

Diode Removal/Replacement

1. Remove defective diode by clipping its leads as close as
possible to diode body.

2. Bend the two remaining leads perpendicular y to the circuit
board.

3. Observing diode polarity, wrap each lead of the new diode
around the corresponding lead on the circuit board.

4. Securely crimp each connection and solder it.

5. Inspect (on the circuit board copper side) the solder joints of
the two "original" leads. If they are not shiny, reheat them and if
necessary, apply additional solder.

Fuse and Conventional Resistor
Removal/Replacement

1. Clip each fuse or resistor lead at top of the circuit board hollow
stake.

2. Securely crimp the leads of replacement component around
notch at stake top.

3. Solder the connections.
CAUTION: Maintain original spacing between the replaced
component and adjacent components and the circuit board to
prevent excessive component temperatures.

Circuit Board Foil Repair

Excessive heat applied to the copper foil of any printed circuit
board will weaken the adhesive that bonds the foil to the circuit
board causing the foil to separate from or "lift-off" the board. The
following guidelines and procedures should be followed whenever
this condition is encountered.

At IC Connections

To repair a defective copper pattern at IC connections use the
following procedure to install a jumper wire on the copper pattern
side of the circuit board. (Use this technique only on IC
connections).

1. Carefully remove the damaged copper pattern with a sharp
knife. (Remove only as much copper as absolutely necessary).

2. carefully scratch away the solder resist and acrylic coating (if
used) from the end of the remaining copper pattern.

3. Bend a small "U" in one end of a small gauge jumper wire and
carefully crimp it around the IC pin. Solder the IC connection.

4. Route the jumper wire along the path of the out-away copper
pattern and let it overlap the previously scraped end of the good
copper pattern. Solder the overlapped area and clip off any
excess jumper wire.

At Other Connections

Use the following technique to repair the defective copper pattern
at connections other than IC Pins. This technique involves the
installation of a jumper wire on the component side of the circuit
board.

1. Remove the defective copper pattern with a sharp knife.
Remove at least 1/4 inch of copper, to ensure that a hazardous
condition will not exist if the jumper wire opens.

2. Trace along the copper pattern from both sides of the pattern
break and locate the nearest component that is directly
connected to the affected copper pattern.

3. Connect insulated 20-gauge jumper wire from the lead of the
nearest component on one side of the pattern break to the lead
of the nearest component on the other side.
Carefully crimp and solder the connections.
CAUTION: Be sure the insulated jumper wire is dressed so the
it does not touch components or sharp edges.

- 6 -

DISASSEMBLY

#1 #2 Detached stand assy (Remove the screws)

#3 Disassembly stand assy #4 Detached Backcover (Remove the screw)

#5 Open the Backcover's latch with jig #6 Unlock latch between Cabinet and Backcover

- 7 -

SPECIFICATION

1. Application range

This specification is applied to CL-81 chassis.

2. Requirement for Test

Testing for standard of each part must be followed in below
condition.

(1) Temperature: 25°C ± 2°C
(2) Humidity: 65% ± 10%
(3) Power: Standard input voltage (AC 100-240V, 50/60Hz)
(4) Measurement must be performed after heat-run more than

30min.

(5) Adjusting standard for this chassis is followed a special

standard.

3.General Specification

4. Mechanical Specification

No.

Item

Specification Remark

1

TFT Color LCD Module

15.0 inches(380.16mm) diagonal(Aspect 4:3)

0.297mm(H)x0.297mm(V)xRGB
LVDS
6BIT, 16,777,216 colors

332.8(H) x 262.2(V) x 18(D)
Anti-Glare(HAZE 3%), Hard Coating(3H)
Normally Black
4 CCFL(4 lamps)
R.T.:5ms + F.T.:11ms(Typ)

LPL

NOTE : Specifications and others are subject to change without notice for improvement

.

No.

1 Product Width(W) Lengh(D) Height(H)

Dimension Before Packing 377.6 242.8 394.5

After Packing 433 143 442

2 Product Only SET 5.6Kg

Weight With BOX 7.7Kg

Type
ActiveDisplay Area
Pixel Pitch [mm]
Electrical Interface
Color Depth
Size [mm]
Surface Treatment
Operating Mode
Back light Unit

R/T Typ.

Item Content

Remark

- 8 -

6.Optical Character

Item

Remark

Specification

Viewing Angle
<CR

≥

10>

Luminance

Contrast Ratio

CIE Color Coordinates

All White/All Black

In PC input
Contrast 100/Brightness 50
In AV Input
PSM : Dynamic
White
(100 IRE)

R/L,
U/D
Luminance(cd/

)

Variation
CR

Typ
65/65
45/55

350

350

0.283

0.298

0.313

0.329

0.283

0.298

0.274

0.286

Min
55/55
40/50

300

300

0.253

0.268

0.283

0.299

0.253

0.268

0.244

0.256

WHITE

(Normal)

WHITE
(Warm)
WHITE

(Normal)

WHITE

(Cool)

Wx
Wy
Wx
Wy
Wx
Wy
Wx
Wy

Max

1.3

0.313

0.328

0.343

0.359

0.313

0.328

0.304

0.316

No.

1

2

3

4

5. Reference table-Function

No.

Item

Specification

Remark
1 Teletext TOP, FLOF TOP(option)
2 REMOCON NEC Code PAL
3 AV Input 1 Rear
4 S-Video Input 1 Rear
5 Component Input 1 Rear(Option, Non EU)
6 PERI TV Connector Full SCART : 1 Rear(Option EU)
7 RGB Input 1 D-Sub 15 pin
8 H/P Input 1 Rear
9 PC Audio Input 1

10 RS-232 YES Only Commercial Model
11 Discrete IR YES Only Commercial Model
12 2 Carrier Stereo BG, DK
13 NICAM Stereo BG, I, LL'
14 2 Carrier Daul BG, DK
15 NICAM Daul BG, I, LL'
16 DW(Double Window) Mode X
17 MW(Multi Window) Mode X
18 Film Mode X
19 Noise Reduction X
20 Progressive Scan O
21 Motion Detection X
22 SRS WOW X
23 Swivel Speaker X
24 EZ-pip X
25 ARC X
26 DRP X
27 DCDI X
28 HDCP X

- 9 -

7. Outgoing Condition

No Item Condition Remark

1 Power Off
2 Volume Level 30
3 Main Picture Input TV
4 Main Last Channel Pr 01
5 Mute Off
6 Station Auto Program

Manual Program
Program Edit
Favorite Program None

7 Picture PSM Dynamic

CSM Normal
Dynamic Contrast 100

Brightness 50
Colour 70
Sharpness 50
Tint 0 NTSC OPTION

8 Sound SSM Flat

AVL Off
Balance 0

9 Special Input TV

Child Lock Off
Power Indicator On
Language English(Area Management)

10 Time Clock -- : --

Off Time -- : -- Off
On Time -- : --

Pr. 1
Vol. 30
Off

Auto Sleep Off

- 10 -

8-1.General Specification

8.Engineering Specification

1

2

3

4

Power Supply

Normal

Stand By

Cut-off Switch off

ITEM

D-SUB Pin Configuraion

Control Function

Component Jack

H/V Sync

On/On
Off/On
On/Off
Off/Off

-

Spectification
1: RED
3: Blue
5: S.T(GND)
7: Green GND
9: N.C
11: ID0(GND)
13: H-Sync
15: SCL

1) Contrast/Brightness

2) H-Position/V-Position

3) Tracking : Clock/Phase

4) Auto Configure

5)RESET
1 : Y
3 : Pb
5 : Pr

2: Green
4: ID2(GND)
6: RED GND
8: Blue GND
10: D-GND
12: SDA
14: V-Sync
Shell: GND

10 : Digital GND

PAL Multi Only

Video

Active

Off

-

Power Consumption

≤

40W

≤

2W

0W

Item Specification Remark

No.

LED Color

BLUE

AMBER

OFF

- 11 -

9. SVC MENU OPTION

No Item Condition Remark

Option1

1 ACMS Yes Yes : ZG

NO : TG

2 TEXT Refer remark TOP: below nation

GERMANY BENELUX
SWITZERLAND FINLAND
AUSTRIA POLAND
SWEDEN ITALY
NORWAY SPAIN
FLOP: Except above nation

3 CH+AU Refer remark YES : China, Australia

NO : Except above area

4 AGC-L NO

Option2
1 A2 ST NO
2 I II SAVE refer remark YES : TG

NO : ZG

3 V-Curve NO

Option3
1 Default Lang 0 According to Suffix
2 Lang Group 1 1: ZG

00 :english 08 :dansk
01 :deutsch 09 :suomi
02 :francais 10 :portugues
03 :italiano 11 :romaneste
04 :espanol 12 :polski
05 :nederlands 13 :magyar
06 :svenska 14 :chesky
07 :norsk 15 :pyccknn
2: TG
00 :english
01 :deutsch
02 :francais
03 :italiano
04 :espanol
05 :pyccknn
06 :chineese

3 TXT Lang 0 (According to Nation) 0:WEST EU:English,Deutsch,Svenska,Italiano,Francais,Espanol,Turkey

1:EAST EU:Polski,Deutsch,Estonia,Slovenia,Chesky,Romaneste
2:CYRILLIC1:Polski,Deutsch,Estonia,Letisi,pyccknn,Slovenia
3:CYRILLIC2:Polski,Deutsch,Svenska,Magyar,pyccknn,Chesky,Slovenia,Estonia
4:ARABIC:English,Francais,Turkey,Arabic

Option4
1 2 hour Off Opt YES
2 Navigation Key No
3 Favorite key No

- 12 -

1. Application

This document is applied to 15" LCD TV which is
manufactured in Monitor (or TV) Factory or is produced on the
basis of this data.

2. Designation

2.1 The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.

2.2. Power Adjustment: Free Voltage

2.3. Magnetic Field Condition: Nil.

2.4. Input signal Unit: Product Specification Standard

2.5. Reserve after operation: Above 30 Minutes

2.6. Adjustment equipments: Pattern Generator (MSPG-925L

or Equivalent), DDC Adjustment Jig equipment, SVC
remote controller

3. Main PCB check process

* Caution *

If DDC CMD don't work, please check below.

1. Enter SVC menu by SVC Remote controller (push IN­START key)

2. Enter "ETC" menu

Check please, IIC_SW is "0" or "1".

- IIC_ SW "0": DDC Communications.(DDC2AB) in

Factory Side

- IIC_ SW "1": EDID Write/Read (DDC2B) and Factory

default(Shipping Condition).

3.1 APC

After Manual-Insult, executing APC

3.2 ISP UOC file

3.2.1 Required Equipment

- JIG for ISP

- PC that is installed with "WISP" program.

- Control + Power LED PCB Ass'y

3.2.2 ISP Sequence

1) Connect main pcb ass'y with JIG for ISP

2) Execute "WISP" Program.

3) Compare UOC version in BOM with version of hex file.

4) Push "Browse..." button in WISP program and select
hex file.

5) Push " Auto Execute" button

6) Occur an Error, try again and again. 2)~5)

7) After finishing ISP, Must AC Off / ON

8) Amber LED is blink during write default value in
EEPROM(24C32)

9) ALL ISP process is finished when Amber LED is off and
Blue LED is ON EEPROM(24C32) write.

3.3 ADC Process

"IIC_ SW" must set "0"for Auto Adjust (After ISP,
automatically set "0")

3.3.1 PC input ADC

3.3.1.1 Auto Gain/Offset Adjustment

Convert to PC in Input-source
Signal equipment displays

Output Voltage : 700 mVp-p
Impress Resolution XGA (1024 x 768 @ 60Hz)
Pattern : gray pattern that left & right is black and center is

white signal (Refer below picture).

(Model : 37, Pattern : 29 at MSPG925L)
Adjust by commanding AUTO_COLOR_ADJUST(0xF1)
0x00 0x00 instruction.

3.3.1.2 Confirmation

We confirm whether "0x00" address of EEPROM "0xA0"
is "0xAA" or not.
If "0x00" address of EEPROM "0xA0" isn't "0xAA", we
adjust once more
We can confirm the ADC values from "0x06~0x0B"
addresses in a page "0xA0"

3.3.2 AV input ADC

3.3.2.1 Auto Gain/Offset Adjustment

Convert to AV in Input-source
Signal equipment displays

Output Voltage : 700 mVp-p
Impress Resolution : CVBS 50Hz .
Pattern : gray pattern that left & right is black and center is

white signal (Refer below picture).

(Model:202, Pattern: 29 at MSPG925L)
Adjust by commanding AUTO_COLOR_ADJUST(0xF1)

0x00 0x00 instruction.

3.3.2.2 Confirmation

We confirm whether "0x01" address of EEPROM "0xA0"
is "0xAA" or not.
If "0x01" address of EEPROM "0xA0" isn't "0xAA", we
adjust once more
We can confirm the ADC values from "0x0C~0x11"
addresses in a page "0xA0"

<Adjustment pattern (PC and CVBS)>

ADJUSTMENT INSTRUCTION

- 13 -

3.4 Function Check

3.4.1 DDC2B test

"IIC_ SW" must set "1" (After ADC, automatically set "1")

Execute DDC2B Scan Test

3.4.2 Check display and sound

"IIC_ SW" must set "1

Check Input and Signal items.

1) TV

2) AV1 (SCART)

3) AV2 (CVBS/ S-Video)

4) RGB-DTV

5) RGB-PC

6) PC Audio IN and H/P Out

3.4.3 DCXO setting

3.4.4 II_SW setting for Total Assembly line process

After finished all function check, "IIC_ SW" must set
"0" by pushing "TILT" key in SVC remote controller

4. Total Assembly line process

* Caution *

If DDC CMD don't work, please check below.

1. Enter SVC menu by SVC Remote controller

2. Enter "ETC" menu
Check please, IIC_SW is "0" or "1"

- IIC_SW "0" : DDC Communications.(DDC2AB)

- IIC_SW "1": EDID Write/Read (DDC2B) and Factory default

.

* We can change IIC_SW by pushing "TILT" key in SVC

remote controller

4.1 Adjustment Preparation

"IIC_ SW" must set "0"

Above 30 minutes H/run in RF no signal
15 Pin D-Sub Jack is connected to the signal of

Pattern Generator.

4.2 Confirmation of Luminance

Set Statement

Input : RGB PC
Contrast : 100(Max)
Brightness : 50
CSM : Normal

Signal equipment displays

Output Voltage : 700 mVp-p
Output Mode : Full White pattern and XGA@ 60 Hz

Confirm whether luminance is over 200cd or not

4.3 Confirmation of Color Coordinate

Input Full White Pattern (RGB PC)
Set CSM : Normal (9300K)
Confirm whether x=0.283±0.03, y=0.298±0.03 or not
Input Full White Pattern (AV2-CVBS)
Set CSM : Normal (9300K)
Confirm whether x=0.283±0.030, y=0.298±0.03 or not

After Confirming color coordinate and luminance, "IIC_
SW" must set "1"

4.4 Other quality

Confirm that each items satisfy under standard condition
that was written product spec.

Confirm Video and Sound at each source

1) AV
Select input AV1 and whether picture is displayed or not
Select input AV2 and whether picture is displayed or not
Select input S-video and whether picture is displayed or
not

2) TV

Select input TV and check below item

1) In Gumi Factory

C05 (E05) - ELETEXT Function Check

; (Applicable to the model that has Teletext

code set-up item in Product spec)
C07 (E07) - Nicam DUAL Check
C52 (E52) - Nicam Stereo Check

Preset CH information

3) RGB-DTV

Select input RGB DTV and whether picture is displayed
or not

4.5 DPM operation confirmation

Check if Power LED Color and Power Consumption operate as
standard.

Measurement Condition : 230V@ 50Hz (Analog)
Confirm DPM operation at the state of screen without

Video Signal.

4.6 DDC EDID Write

Connect D-sub Signal Cable to D-Sub Connector.
Write EDID DATA to EEPROM(24C02) by using DDC2B

protocol.
Check whether written EDID data is correct or not. (refer
to Product spec).

4.7 Outgoing condition Configuration

After all test is finished, Outgoing Option setting in
Service OSD. And Make Ship Condition.
Press IN-START Key by using the SVC Remote
Controller
Press 8 digit code by SVC Remote controller refer
3854TAA001A in BOM
After option configuration is complete, Press IN-STOP
Key
Amber LED is blink. And then Automatically turn off. .
(Must not AC OFF during blink)

- 14 -

SERVICE OSD

Service Menu

Description of operation

- [00 0 0 0000] : Country Option Code

- Option 1 ~ 4 : Detail Country Option 1~4(Refer Adjust spec sheet)

- Auto ADC : Adjust ADC in PC or AV by SVC Remote Control

- Audio Setup : Only Engineering. Don't setting

- ETC : ETC Setting

II_SW(0 : Auto adjustment & DDC Communication in factory side/

1 : EDID Read and Write and shipping condiition)

Write Protect (0 : EDID write / 1 : EDID write protection)

- Full Reset : Factory Reset

- 200X. 0X. 0X : Firmware update date

- PAL-XX : inchi

- LOC Ver : Video & Audio Decoder Firmware Version

- Sedna Ver : Scaler Firmware Version

How to enter SVC Menu

1. Push "IN-Start" key in SVC remote controller.

2. Push "Menu" key in remote controller over 5 seconds the while pushing "Menu" key of Local button.
(If SVC OSD appear, remove the finger on "Menu" key in remote controller first of all)

XX

- 15 -

SVC REMOCON

NO. KEY FUNTION REMARK

1 POWER To turn the TV on or off
2 MUTE To activate the mute function.
3 P-CHECK To check TV screen image easily. Shortcut keys
4 S-CHECK To check TV screen sound easily Shortcut keys
5 ARC(23inch) To select size of the main screen Shortcut keys

(Auto, 4:3, 16:9, 14:3, Zoom, Cinema Zoom)
6 CAPTION Switch to closed caption broadcasting
7 TXT To toggle on/off the teletext mode
8 TV/AV External input
9 IN-START To enter adjustment mode when manufacturing the TV sets.

Use the AV key to

In-Start

Vol±

Auto ADC

Vol±

W/B adjustment

enter the screen W/B

Exit two times(Adjustment completed)

adjustment mode.

10 MPX To select the multiple sound mode

(Mono, Stereo or MPEG, DOLBY, Digital)

11 EXIT To release the adjustment mode
12 APC(PSM)

To easily adjust the screen according to surrounding brightness

13 ASC(SSM) To easily adjust sound according to the program type
14 MULTIMEDIA External input Shortcut keys
15 CH ±

To move channel up/down or to select a functiondisplayed on the screen.

16 VOL ± To adjust the volume or accurately control a specific function.
17 ENTER To set a specific function or complete setting.
18 CH-(OP1) To use as a red key in the teletext mode
19 CH+(OP2) To use as a green key in the teletext mode
20 SWAP(OP3) To use as a yellow key in the teletext mode
21 INPUT(OP4) To use as a blue key in the teletext mode
22 MENU

To select the functions such as video, voice, function or channel.

23 IN-STOP

To set the delivery condition status after manufacturing the TV set.

24 HOLD

Used as a hold key in the teletext mode (Page updating is stopped.)

25 TIME Displays the teletext time in the normal mode

Enables to select the sub code in the teletext mode

26 SIZE Used as the size key in the teletext mode
27 INDEX Used as the index key in the teletext mode

(Top index will be displayed if it is the top text.)

28 UPDATE Used as the update key in the teletext mode

(Text will be displayed if the current page is updated.)

29 MODE Used as Mode in the teletext mode
30 TILT

To set IIC SW "0" or "1" in the adjustment mode

31 0~9 To manually select the channel.

- 16 -

TROUBLESHOOTING

No power
(LED indicator off)

Check short of main B/D
or Change Lips

Change U406

Change LED Assy

Check 15V or 5V

of Lips

Check Output of

U406

Check LED Assy

Check J103, J125, J126

Connector

Fail

Fail

Change Q402

Check Output of

Q402

Fail

Pass

Fail

Pass

Pass

Pass

:[A]Process

- 17 -

No Raster

Check LED Status

on display unit

Check the input/

Output of U301

Check

U401~U405, U407, U409

Check inverter

Connector or inverter

Check input source cable and jack

Repeat A PROCESS

Fail

Change U401~U405,

U407, U409

Fail

Change U301

Fail

Change inverter
connector or inverter

Fail

Change panel link
cable or module

Fail

Check panel link
Cable or module

Pass

Pass

Pass

Pass

Pass

:[B]Process

- 18 -

No Raster on AV Signal
(SCART, CVBS, S-VHS)

No Raster on TV(RF) signal

Change L108, L109,
L110, L112, R194, R198,
R184

Check the signal of

L108, L109, L110, L112

R194, R198, R184

Repeat

[A] Process

Check the output of

TU701

Check the

input/output of U301

Check the

input/output of U101

Check input source cable and jack

Fail

Fail

Fail

Fail

Re-soldering or
Change the defect part
Check X301

Fail

Re-soldering or
Change the defect part

Check 5V, 33V of TU701
Re-soldering or
Change the defect part

Pass

Pass

Pass

Pass

- 19 -

No Sound

Check the speaker wire

Change source input

Check the

input source

Fail

Pass

Re-soldering or
Change the defect part
Check X301

Check the input/output

of U301

Fail

Pass

Re-soldering or
Change the defect part

Check the input/output

of U201

Fail

Pass

Change speaker

Check the speaker

Fail

Pass

- 20 -

BLOCK DIAGRAM

- 21 -

BLOCK DIAGRAM DESCRIPTION

Power Supply Block (LIPS)

This Block Generates DC Voltage (5V,15V) to Main
Control system from AC Power (100-240 V, 50/60 Hz,

1.0A)
Also it has the inverter function that converts input
voltage to AC Rms value for the LCD lamp.

DC/DC Converter block

DC/DC Converter convert the input 5V,15V to proper

3.3V, 5V, 8V, 12V for Main control system.
For shooting heat trouble, we use the DC/DC
converting IC

Audio Amplifier

This block is composed of TPA3005D2 and peripheral
device.
The function of the audio amplifier is that to amplify
audio L / R signal transmitted from audio decoder. The
audio signal is amplified according to pre-defined DC
volume control curve.

Audio / Video / IF Decoder / Scaler

This block is composed of LOC1 and peripheral
devices.

1) Video Decoder
This Block Selects input Video signals (like CVBS, Y/C,
SCART RGB) and output RGB signal.
On decoding, We can control signal like Contrast,
Brightness, Sharpness, Color, tint signals including
Adaptive Comb Filter

2) Audio Decoder
This block analyzes audio input signal through A/V Jack
and PC audio and Tuner IF.
The analyzed signals transmitted to audio amplifier
On decoding, We can control signal like Bass, treble.

3) IF Decoder
This block can change IF signal to audio and video
signal that transmitted to Video/audio decoder.

4) Scaler
This IC includes A/D Converter and LVDS Transmitter
This IC is directly Inputted Analog Signal and transmits
it to LCD Module

5) Micom
This block controls each IC through IIC communication
line.

LVDS Rx (DTC34LF86L)

It is composed of DTC34LF86L/THC63LVDF84B.
The LVDS Rx converts the LVDS data streams back
into 24bits of CMOS/TTL data with
Falling edge or rising edge clock for convenient with
variety of LCD panel controllers.

Switch IC (PI3V512QE)

It is composed of PI3V512QE.
This IC selects between D-sub RGB signal and LOC1
RGB signal, and it transmits the selected signal to
video signal processor.

TUNER

Micom controls this through IIC Line.
TUNER makes IF and transmits IF signal to LOC1.

- 22 -

WIRING DIAGRAM

6631T20010F-3P

5

6631V00040A-2P

6631900024D-3P

6631T11012R-20P

6631900042B-11P

2

7

6

6631900026B-4P

3

6631T20029S-5P

1

6631900026B-4P

6

4

- 23 -

EXPLODED VIEW

030

041

040

070

060

120

100

090

080

110

020

010

050

- 24 -

EXPLODED VIEW PARTS LIST

No.

PART NO.

DESCRIPTION

30919B0002E CABINET ASSEMBLY, 15LC1 BRAND . TITAN SILVER C/SKD

6304FLP234A

LCD(LIQUID CRYSTAL DISPLAY), LC150X02-TL01 LG PHILPS TFT COLOR TN LAMP MULTI
3809900013H BACK COVER ASSEMBLY, 15LC1 2PHONE FOR RZ C/SKD
3043900039A TILT SWIVEL ASSEMBLY, 15LC1 . STAND BODY ASSY
3043900040A TILT SWIVEL ASSEMBLY, 15LC1 . STAND BASE ASSY

68719ST957A PWB(PCB) ASSEMBLY,SUB, SUB T.T CL81 15LC1R SNRULFT LED IR
68719ST956A PWB(PCB) ASSEMBLY,SUB, SUB T.T CL81 15LC1R SNRULFT CONTROL

49519S0004F METAL ASSEMBLY, FRAME MAIN ASSY-15LC1-LPL TN C/SKD

6871TPT318A PWB(PCB) ASSEMBLY,POWER, MFT 4-LAMP POWER TOTAL BRAND .

33139P1006A MAIN TOTAL ASSEMBLY, 15LC1R-ZG.SNRULFT BRAND CL-81
49519K0117A METAL ASSEMBLY, SHIELD AV 15LC1

6400GTTX02A

SPEAKER,FULLRANGE, EF1527C-6428-6 TOPTONE FULL-RANGE(GENERAL) 16OHM 5/7W 82DB OTHERS 40*70 210HZ
49519K0116B METAL ASSEMBLY, REAR 15LC1 C/SKD

010
020
030
040
041
050
060
070
080
090
100
110
120

- 25 -

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

C301 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C307 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C3092 0CH3224K946 0.22UF 50V Z F 2012 R/TP

C316 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C319 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C322 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C327 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C330 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C367 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C394 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C395 0CH3224K946 0.22UF 50V Z F 2012 R/TP
C102 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C111 0CK105DH56A 1UF 2012 25V 10% X7R R/TP
C112 0CK105DH56A 1UF 2012 25V 10% X7R R/TP
C113 0CH5220K416 22PF 50V 5% NP0 2012 R/TP
C132 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C144 0CK105DH56A 1UF 2012 25V 10% X7R R/TP
C170 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C171 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C172 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C174 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C176 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C177 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C178 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C180 0CK475DD57A 4.7UF 2012 10V 10% X5R R/TP
C181 0CK475DD57A 4.7UF 2012 10V 10% X5R R/TP
C187 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C188 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C190 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C192 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C197 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C205 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C209 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C211 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C212 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C213 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C215 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C216 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C217 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C228 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C236 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C237 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C238 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C239 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C240 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C3001 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C3002 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C3011 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C3013 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C3022 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C3026 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C3047 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C3051 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

C3061 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C3064 0CH3474H946 "0.47UF 25V 80%,-20% F(Y5V)"
C3082 0CK225DH94A "2.2UF 2012 25V 80%,-20% F(Y"
C3083 0CK225DH94A "2.2UF 2012 25V 80%,-20% F(Y"
C3084 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C3093 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C3102 0CK475DD57A 4.7UF 2012 10V 10% X5R R/TP
C313 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C331 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C332 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C334 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C335 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C336 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C337 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C338 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C339 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C340 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C341 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C342 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C343 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C347 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C348 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C350 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C358 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C360 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C361 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C362 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C363 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C364 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C365 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C366 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C373 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C374 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C375 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C379 0CH5102K416 1000PF 50V 5% NP0 2012 R/TP
C386 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C388 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C389 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C390 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C391 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C396 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C403 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C409 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C411 0CK475DD57A 4.7UF 2012 10V 10% X5R R/TP
C413 0CH3103K516 10000PF 50V 10% B(Y5P) 2012
C415 0CK105DH56A 1UF 2012 25V 10% X7R R/TP
C416 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C421 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C422 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C425 0CH3105H946 "1UF 2012 25V 80%,-20% F(Y5V"
C704 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C705 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C708 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C740 0CH3103K516 10000PF 50V 10% B(Y5P) 2012

REPLACEMENT PARTS LIST

MAIN BOARD
CAPACITOR

For Capacitor & Resistors, the
charactors at 2nd and 3rd digit in the
P/No. means as follows;

CC, CX, CK, CN, CH : Ceramic
CQ : Polyestor
CE : Electrolytic
CF : Fixed Film

RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RH : CHIP, Metal Glazed(Chip)
RR : Drawing

- 26 -

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

C744 0CH3104K566 0.1UF 50V 10% X7R 2012 R/TP
C117 0CK105DH56A 1UF 2012 25V 10% X7R R/TP
C118 0CK105DH56A 1UF 2012 25V 10% X7R R/TP
C129 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C130 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C131 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C145 0CK103CK51A 0.01UF 1608 50V 10% R/TP B(
C202 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C203 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C206 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C207 0CK105CF94A "1UF 1608 16V 80%,-20% R/TP"
C208 0CK105CF94A "1UF 1608 16V 80%,-20% R/TP"
C210 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C214 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C218 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C221 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C222 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C223 0CK105CF94A "1UF 1608 16V 80%,-20% R/TP"
C224 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C225 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C3015 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C3017 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C3019 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C302 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C303 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C3031 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C3032 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C3035 0CK225DH94A "2.2UF 2012 25V 80%,-20% F(Y"
C3036 0CK333CK56A 33000PF 1608 50V 10% R/TP X
C304 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C3040 0CK225DH94A "2.2UF 2012 25V 80%,-20% F(Y"
C3042 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C3044 0CK333CK56A 33000PF 1608 50V 10% R/TP X
C3050 0CK333CK56A 33000PF 1608 50V 10% R/TP X
C3066 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C3067 0CK223CK51A 223 1608 50V 10% B(Y5P) R/T
C3068 0CK333CK56A 33000PF 1608 50V 10% R/TP X
C3069 0CK333CK56A 33000PF 1608 50V 10% R/TP X
C3070 0CK333CK56A 33000PF 1608 50V 10% R/TP X
C3085 0CK225DH94A "2.2UF 2012 25V 80%,-20% F(Y"
C3086 0CK225DH94A "2.2UF 2012 25V 80%,-20% F(Y"
C3090 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C3091 0CK474CH94A "0.47UF 1608 25V 80%,-20% R/"
C312 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C320 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C345 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C352 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C354 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C355 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C356 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C357 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C369 0CK224CF56A 0.22UF 1608 16V 10% R/TP X7
C372 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C380 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C381 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C382 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C387 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C392 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R
C706 0CK103CK51A 0.01UF 1608 50V 10% R/TP B(
C707 0CK103CK51A 0.01UF 1608 50V 10% R/TP B(
C710 0CK103CK51A 0.01UF 1608 50V 10% R/TP B(
C114 0CH6470K416 47PF 2012 50V 5% NP0 R/TP

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

C115 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C116 0CH6101K416 100PF 50V 5% NP0 2012 R/TP
C150 0CH6101K416 100PF 50V 5% NP0 2012 R/TP
C156 0CH6680K416 68PF 2012 50V 5% NP0 R/TP
C191 0CH6331K416 330PF 2012 50V 5% NP0 R/TP
C3012 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C3014 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C3024 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C3028 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C3033 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C3043 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C3045 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C3048 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C305 0CH6151K416 150PF 2012 50V 5% NP0 ­C3060 0CH2392K516 3900PF 50V 10% B(Y5P) 2012
C3062 0CH6470K416 47PF 2012 50V 5% NP0 R/TP
C317 0CH2472K516 4700PF 50V 10% B(Y5P) 2012
C329 0CH2334F566 0.33UF 16V 10% X7R 2012 R/T
C126 0CC101CK41A 100PF 1608 50V 5% R/TP NP0
C127 0CC101CK41A 100PF 1608 50V 5% R/TP NP0
C153 0CC101CK41A 100PF 1608 50V 5% R/TP NP0
C154 0CC101CK41A 100PF 1608 50V 5% R/TP NP0
C155 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C157 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C189 0CC271CK41A 270PF 1608 50V 5% R/TP NP0
C198 0CC271CK41A 270PF 1608 50V 5% R/TP NP0
C199 0CC271CK41A 270PF 1608 50V 5% R/TP NP0
C204 0CC221CK41A 220PF 1608 50V 5% R/TP NP0
C232 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C233 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C3030 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C3037 0CC150CK41A 15PF 1608 50V 5% R/TP NP0
C3049 0CC150CK41A 15PF 1608 50V 5% R/TP NP0
C3073 0CC150CK41A 15PF 1608 50V 5% R/TP NP0
C308 0CC150CK41A 15PF 1608 50V 5% R/TP NP0
C3080 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C3081 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C309 0CC150CK41A 15PF 1608 50V 5% R/TP NP0
C3100 0CC101CK41A 100PF 1608 50V 5% R/TP NP0
C3101 0CC270CK41A 27PF 1608 50V 5% R/TP NP0
C376 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C377 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C378 0CC470CK41A 47PF 1608 50V 5% R/TP NP0
C393 0CC100CK41A 10PF 1608 50V 5% R/TP NP0
C412 0CC102CK41A 1000PF 1608 50V 5% R/TP NP0
C134 0CE228ED618 "2200UF KMG,RD 10V 20% FL TA"
C146 0CE108EH618 1000UF KMG 25V 20% FL TP 5
C226 0CE477EH618 470UF KMG 25V 20% FL TP 5
C227 0CE477EH618 470UF KMG 25V 20% FL TP 5
C405 0CE477ED610 "470UF KMG,RD 10V 20% FL BUL"
C101 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C109 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C141 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C175 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C194 0CH8106F691 10UF 16V 20% 105STD (CYL) R
C195 0CH8106F691 10UF 16V 20% 105STD (CYL) R
C196 0CH8106F691 10UF 16V 20% 105STD (CYL) R
C201 0CH8476H691 47UF 25V 20% 105STD (CYL) R
C220 0CE337SC6D8 "330UF MVG,MC,VC 6.3V 20% SM"
C3004 0CH8106F691 10UF 16V 20% 105STD (CYL) R
C3046 0CE475WJ6DC 4.7UF MVK 35V 20% R/TP(SMD)
C3071 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

C3094 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C311 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C318 0CE105WK6DC 1UF MVK 50V 20% R/TP(SMD) S
C321 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C323 0CH8106F691 10UF 16V 20% 105STD (CYL) R
C359 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C371 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C384 0CH8106F691 10UF 16V 20% 105STD (CYL) R
C385 0CH8106F691 10UF 16V 20% 105STD (CYL) R
C404 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C408 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C410 0CE226WF6DC 22UF MVK 16V 20% R/TP(SMD)
C414 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C420 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C423 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C748 0CE226SK6DC 22UF MVG 50V 20% SMD R/TP
C750 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD)
C751 0CE226WF6DC 22UF MVK 16V 20% R/TP(SMD)

D110 0DSON00138A "MMBD301LT1G,LF ON SEMI R/TP"
D701 0DS226009AA KDS226 TP KEC - 80V - - 4NS
D703 0DSON00138A "MMBD301LT1G,LF ON SEMI R/TP"
D101 0DS226009AA KDS226 TP KEC - 80V - - 4NS
D102 0DS226009AA KDS226 TP KEC - 80V - - 4NS
D103 0DS226009AA KDS226 TP KEC - 80V - - 4NS
D106 0DD184009AA KDS184 TP KEC - 85V - - - 3
D702 0DSKE00248A KDS114 KEC REEL TAPING USC
ZD201 0DZ120009CF UDZ 12B TP ROHM-K SOD323 20
ZD102 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD103 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD109 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD111 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD112 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD113 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD114 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD115 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD118 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD119 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD120 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD121 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD122 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD123 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD124 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD125 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD126 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD127 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD128 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD129 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD130 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD131 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD136 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD137 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD138 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD145 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD146 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD147 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD150 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD151 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD703 0DZRM00448A UDZS33B ROHM REEL TAPING UM
ZD704 0DZRM00448A UDZS33B ROHM REEL TAPING UM

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

ZD101 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD105 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD106 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD108 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD110 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD116 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD117 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323

U302 0IMMRSG036D "M24C32-WMN6TPW,LF SGS-THOMS"
U106 0IMMRSG036A "M24C02-WMN6T(P),LF SGS-THOM"
U101 0IPRP00639A "PI3V512QE PERICOM 24P,QSOP"
U201 0IPRP00007A "TPA3005D2PHPRG4,PB FREE TEX"
U301 0IPRP00641B "TDA15521E PHILIPS 388PIN,BG"
U402 0IRH033200A BA033FP-E2 MOLD-3 TP REGULA
U404 0IRH033200A BA033FP-E2 MOLD-3 TP REGULA
U401 0IKE780800J KIA7808API 3 ST REGULATOR .
U403 0IPMGSG018D LD1086DT18TR-LF SGS-THOMSON
U409 0ISS780500H "KA78M05-R 3P,D-PAK TP 5V 0."
U704 0ISS780500H "KA78M05-R 3P,D-PAK TP 5V 0."
U112 0ISTL00031A "MC74HC4066ADR2G,LF ON SEMI"

L201 61409B0002A DBF-1030S DONGBANG 30UH 15%
L202 61409B0002A DBF-1030S DONGBANG 30UH 15%
L203 61409B0002A DBF-1030S DONGBANG 30UH 15%
L204 61409B0002A DBF-1030S DONGBANG 30UH 15%
L712 150-985B DR8*11 2.4MH 0.16MM 270.5
L104 6210TCE001H HB-1T2012-301JT CERATEC 201
L105 6210TCE001H HB-1T2012-301JT CERATEC 201
L106 6210TCE001H HB-1T2012-301JT CERATEC 201
L107 6210TCE001H HB-1T2012-301JT CERATEC 201
L108 6210TCE001H HB-1T2012-301JT CERATEC 201
L109 6210TCE001H HB-1T2012-301JT CERATEC 201
L110 6210TCE001H HB-1T2012-301JT CERATEC 201
L111 6210TCE001H HB-1T2012-301JT CERATEC 201
L112 6210TCE001H HB-1T2012-301JT CERATEC 201
L101 6200J00005E HH-1M2012-601JT CERATEC R/T
L115 6200J00005E HH-1M2012-601JT CERATEC R/T
L205 6210TCE0014 HB-1M2012-221 CERATEC R/TP
L206 6210TCE0014 HB-1M2012-221 CERATEC R/TP
L207 6210TCE0014 HB-1M2012-221 CERATEC R/TP
L208 6210TCE0014 HB-1M2012-221 CERATEC R/TP
L301 6200J00005E HH-1M2012-601JT CERATEC R/T
L304 6200J00005E HH-1M2012-601JT CERATEC R/T
L306 6200J00005E HH-1M2012-601JT CERATEC R/T
L310 6200J00005E HH-1M2012-601JT CERATEC R/T
L312 6200J00005E HH-1M2012-601JT CERATEC R/T
L313 6200J00005E HH-1M2012-601JT CERATEC R/T
L314 6200J00005E HH-1M2012-601JT CERATEC R/T
L317 6200J00005E HH-1M2012-601JT CERATEC R/T
L318 6200J00005E HH-1M2012-601JT CERATEC R/T
L321 6200J00005E HH-1M2012-601JT CERATEC R/T
L323 6200J00005E HH-1M2012-601JT CERATEC R/T
L325 6200J00005E HH-1M2012-601JT CERATEC R/T
L327 6200J00005E HH-1M2012-601JT CERATEC R/T
L328 6200J00005E HH-1M2012-601JT CERATEC R/T
L329 6200J00005E HH-1M2012-601JT CERATEC R/T
L334 6200J00005E HH-1M2012-601JT CERATEC R/T
L335 6200J00005E HH-1M2012-601JT CERATEC R/T

- 27 -

DIODEs

IC

COIL & FILTER & INDUCTOR

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

L302 6200J00005E HH-1M2012-601JT CERATEC R/T
L305 6200J00005E HH-1M2012-601JT CERATEC R/T
L307 6200J00005E HH-1M2012-601JT CERATEC R/T
L308 6200J00005E HH-1M2012-601JT CERATEC R/T
L324 6200J00005E HH-1M2012-601JT CERATEC R/T
L330 6200J00005E HH-1M2012-601JT CERATEC R/T
L333 6200J00005E HH-1M2012-601JT CERATEC R/T
U701 6200QL3003A K3965D EPCOS BULK PAL VIDEO
U702 6200QL3003B K9656D EPCOS BULK PAL SOUND
L704 0LC0562001A 0.56UH 10% 2012 R/TC FI-A20
L731 0LC1020101A 1UH 10% 2012 R/TC FI-B2012-

Q203 0TR162309CA KSC1623 TP SAMSUNG SOT23 N
Q107 0TR162309CA KSC1623 TP SAMSUNG SOT23 N
Q110 0TR162309CA KSC1623 TP SAMSUNG SOT23 N
Q111 0TR162309CA KSC1623 TP SAMSUNG SOT23 N
Q112 0TR162309CA KSC1623 TP SAMSUNG SOT23 N
Q704 0TR162309CA KSC1623 TP SAMSUNG SOT23 N
Q101 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q102 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q103 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q109 0TR390609FA FAIRCHILD KST3906-MTF TP SO
Q116 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q117 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q701 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q715 0TR387500AA CHIP 2SC3875S(ALY) BK KEC ­Q301 0TR127009AA KTA1270-Y(KTA562TM) TP KEC
Q302 0TR127009AA KTA1270-Y(KTA562TM) TP KEC
Q105 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q106 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q108 0TR150400BA CHIP 2SA1504S(ASY) BK KEC ­Q201 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q304 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q305 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q402 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
Q702 0TR388109AA KTC3881 CHIP TP KEC - ­U405 0TFVI80067A SI3865BDV(E3) VISHAY R/TP T
U406 0TF492509AA SI4925DY TP TEMIC 30V 6.1A

R334 0RH1004D422 1M OHM 1 / 10 W 1% D R/TP
R335 0RH3902D422 39K OHM 1 / 10 W 1% D R/TP
R751 0RH3902D422 39K OHM 1 / 10 W 1% D R/TP
R776 0RX0202K665 20 OHM 2 W 5% SF15
R1001 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1002 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R1005 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1006 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R1009 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1010 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R1013 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1014 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1017 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1018 0RH1001D622 1K OHM 1 / 10 W 2012 5.00%
R1020 0RH5102D622 51K OHM 1 / 10 W 2012 5.00%
R1021 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R1022 0RH1802D622 18K OHM 1 / 10 W 2012 5.00%
R1026 0RH3900D622 390 OHM 1 / 10 W 2012 5.00%
R1027 0RH3900D622 390 OHM 1 / 10 W 2012 5.00%

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

R1028 0RH3900D622 390 OHM 1 / 10 W 2012 5.00%
R1029 0RH3900D622 390 OHM 1 / 10 W 2012 5.00%
R1031 0RH1500D622 150 OHM 1 / 10 W 2012 5.00%
R1032 0RH0752D622 75 OHM 1 / 10 W 2012 5.00%
R1033 0RH0752D622 75 OHM 1 / 10 W 2012 5.00%
R1034 0RH0752D622 75 OHM 1 / 10 W 2012 5.00%
R1039 0RH1001D622 1K OHM 1 / 10 W 2012 5.00%
R1040 0RH1001D622 1K OHM 1 / 10 W 2012 5.00%
R1043 0RH1003D622 100K OHM 1 / 10 W 2012 5.00
R1047 0RH1003D622 100K OHM 1 / 10 W 2012 5.00
R1048 0RH1801D622 1.8K OHM 1 / 10 W 2012 5.00
R107 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R1070 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1071 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R1072 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1073 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R1074 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R1075 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R110 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R111 0RH1200D622 120 OHM 1 / 10 W 2012 5.00%
R115 0RH0222D622 22 OHM 1 / 10 W 2012 5.00%
R116 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R117 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R121 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R122 0RH1501D622 1.5K OHM 1 / 10 W 2012 5.00
R126 0RH1502D622 15K OHM 1 / 10 W 2012 5.00%
R129 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R130 0RH1001D622 1K OHM 1 / 10 W 2012 5.00%
R131 0RH1001D622 1K OHM 1 / 10 W 2012 5.00%
R136 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R138 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R139 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R145 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R146 0RH0472D622 47 OHM 1 / 10 W 2012 5.00%
R149 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R151 0RH1001D622 1K OHM 1 / 10 W 2012 5.00%
R172 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R174 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R177 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R178 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R180 0RH1500D622 150 OHM 1 / 10 W 2012 5.00%
R182 0RH1200D622 120 OHM 1 / 10 W 2012 5.00%
R183 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R184 0RH0752D622 75 OHM 1 / 10 W 2012 5.00%
R190 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R191 0RH0752D622 75 OHM 1 / 10 W 2012 5.00%
R192 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R194 0RH0222D622 22 OHM 1 / 10 W 2012 5.00%
R195 0RH0222D622 22 OHM 1 / 10 W 2012 5.00%
R196 0RH0222D622 22 OHM 1 / 10 W 2012 5.00%
R197 0RH0752D622 75 OHM 1 / 10 W 2012 5.00%
R198 0RH0472D622 47 OHM 1 / 10 W 2012 5.00%
R199 0RH0752D622 75 OHM 1 / 10 W 2012 5.00%
R206 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R207 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R217 0RH1502D622 15K OHM 1 / 10 W 2012 5.00%
R218 0RH4702D622 47K OHM 1 / 10 W 2012 5.00%
R221 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R222 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R223 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R224 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R225 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D

- 28 -

RESISTORs

TRANSISTOR

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

R226 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R227 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R248 0RH1201D622 1.2K OHM 1 / 10 W 2012 5.00
R251 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R3001 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R3002 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R3003 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R3006 0RH0331D622 3.3 OHM 1 / 10 W 2012 5.00%
R3007 0RH0331D622 3.3 OHM 1 / 10 W 2012 5.00%
R3008 0RH0331D622 3.3 OHM 1 / 10 W 2012 5.00%
R3009 0RH0331D622 3.3 OHM 1 / 10 W 2012 5.00%
R3017 0RH1502D622 15K OHM 1 / 10 W 2012 5.00%
R3018 0RH1502D622 15K OHM 1 / 10 W 2012 5.00%
R3031 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R304 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R305 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R306 0RH1001D622 1K OHM 1 / 10 W 2012 5.00%
R307 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R308 0RH1502D622 15K OHM 1 / 10 W 2012 5.00%
R309 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R310 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R315 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R321 0RH0102D622 10 OHM 1 / 10 W 2012 5.00%
R322 0RH0102D622 10 OHM 1 / 10 W 2012 5.00%
R323 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R325 0RH4702D622 47K OHM 1 / 10 W 2012 5.00%
R327 0RH0102D622 10 OHM 1 / 10 W 2012 5.00%
R328 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R329 0RH2203D622 220K OHM 1 / 10 W 2012 5.00
R330 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R333 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R337 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R338 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R339 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R341 0RH1003D622 100K OHM 1 / 10 W 2012 5.00
R347 0RH8202D622 82K OHM 1 / 10 W 2012 5.00%
R348 0RH1201D622 1.2K OHM 1 / 10 W 2012 5.00
R349 0RH0102D622 10 OHM 1 / 10 W 2012 5.00%
R350 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R352 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R367 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R369 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R382 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R383 0RH1502D622 15K OHM 1 / 10 W 2012 5.00%
R385 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R386 0RH1502D622 15K OHM 1 / 10 W 2012 5.00%
R388 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R391 0RH0331D622 3.3 OHM 1 / 10 W 2012 5.00%
R392 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R394 0RH0331D622 3.3 OHM 1 / 10 W 2012 5.00%
R395 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R396 0RH2201D622 2.2K OHM 1 / 10 W 2012 5.00
R397 0RH2201D622 2.2K OHM 1 / 10 W 2012 5.00
R401 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R409 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R413 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R414 0RH4702D622 47K OHM 1 / 10 W 2012 5.00%
R425 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R426 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R434 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R702 0RH4700D622 470 OHM 1 / 10 W 2012 5.00%
R705 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

R706 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R711 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R715 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R728 0RH1501D622 1.5K OHM 1 / 10 W 2012 5.00
R740 0RH4702D622 47K OHM 1 / 10 W 2012 5.00%
R741 0RH4700D622 470 OHM 1 / 10 W 2012 5.00%
R742 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R750 0RH6802D622 68K OHM 1 / 10 W 2012 5.00%
R753 0RH1002D622 10K OHM 1 / 10 W 2012 5.00%
R760 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R761 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R762 0RH4701D622 4.7K OHM 1 / 10 W 2012 5.00
R772 0RH8200D622 820 OHM 1 / 10 W 2012 5.00%
R775 0RH1000D622 100 OHM 1 / 10 W 2012 5.00%
R1003 0RJ1300D477 130 OHM 1/10 W 1% 1608 R/TP
R1004 0RJ0752D477 75 OHM 1/10 W 1% 1608 R/TP
R1007 0RJ1300D477 130 OHM 1/10 W 1% 1608 R/TP
R1008 0RJ0752D477 75 OHM 1/10 W 1% 1608 R/TP
R1011 0RJ1300D477 130 OHM 1/10 W 1% 1608 R/TP
R1012 0RJ0752D477 75 OHM 1/10 W 1% 1608 R/TP
R102 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R1023 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R103 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R1030 0RJ0752D677 75 OHM 1/10 W 5% 1608 R/TP
R104 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R105 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R1076 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R1077 0RJ0222D677 22 OHM 1/10 W 5% 1608 R/TP
R109 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R112 0RJ0752D677 75 OHM 1/10 W 5% 1608 R/TP
R114 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R128 0RJ4700D677 470 OHM 1/10 W 5% 1608 R/TP
R132 0RJ0752D677 75 OHM 1/10 W 5% 1608 R/TP
R133 0RJ0752D677 75 OHM 1/10 W 5% 1608 R/TP
R134 0RJ1102D677 11K OHM 1/10 W 5% 1608 R/TP
R135 0RJ1102D677 11K OHM 1/10 W 5% 1608 R/TP
R137 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R150 0RJ2001D677 2K OHM 1/10 W 5% 1608 R/TP
R152 0RJ1001D677 1K OHM 1/10 W 5% 1608 R/TP
R153 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R155 0RJ8201D677 8.2K OHM 1/10 W 5% 1608 R/T
R156 0RJ8201D677 8.2K OHM 1/10 W 5% 1608 R/T
R157 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R159 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R161 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R162 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R163 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R164 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R165 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R166 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R169 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R170 0RH0000D622 0 OHM 1 / 10 W 2012 5.00% D
R175 0RJ0682D677 68 OHM 1/10 W 5% 1608 R/TP
R202 0RJ1003D677 100K OHM 1/10 W 5% 1608 R/T
R203 0RJ1502D677 15K OHM 1/10 W 5% 1608 R/TP
R204 0RJ1002D677 10K OHM 1/10 W 5% 1608 R/TP
R208 0RJ1203D677 120K OHM 1/10 W 5% 1608 R/T
R215 0RJ1802D677 18K OHM 1/10 W 5% 1608 R/TP
R234 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R250 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R253 0RJ1001D677 1K OHM 1/10 W 5% 1608 R/TP
R254 0RJ1001D677 1K OHM 1/10 W 5% 1608 R/TP

- 29 -

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

R301 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R3010 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R3015 0RJ1502D677 15K OHM 1/10 W 5% 1608 R/TP
R3016 0RJ1502D677 15K OHM 1/10 W 5% 1608 R/TP
R302 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R3020 0RJ0222D677 22 OHM 1/10 W 5% 1608 R/TP
R3021 0RJ0222D677 22 OHM 1/10 W 5% 1608 R/TP
R303 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R312 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R313 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R316 0RJ1001D677 1K OHM 1/10 W 5% 1608 R/TP
R317 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R318 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R319 0RJ2002D677 20000 OHM 1/10 W 5% 1608 R/
R320 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R326 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R332 0RJ0682D677 68 OHM 1/10 W 5% 1608 R/TP
R336 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R342 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R343 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R344 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R351 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R355 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R356 0RJ1000D677 100 OHM 1/10 W 5% 1608 R/TP
R370 0RJ1002D677 10K OHM 1/10 W 5% 1608 R/TP
R372 0RJ1002D677 10K OHM 1/10 W 5% 1608 R/TP
R373 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R375 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R376 0RJ3900D677 390 OHM 1/10 W 5% 1608 R/TP
R377 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R378 0RJ1202D677 12K OHM 1/10 W 5% 1608 R/TP
R379 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R380 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R384 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R387 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R399 0RJ0332D677 33 OHM 1/10 W 5% 1608 R/TP
R410 0RJ2202D677 22K OHM 1/10 W 5% 1608 R/TP
R411 0RJ5600D677 560 OHM 1/10 W 5% 1608 R/TP
R417 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R418 0RJ0000D677 0 OHM 1/10 W 5% 1608 R/TP
R533 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R534 0RJ4701D677 4.7K OHM 1/10 W 5% 1608 R/T
R714 0RJ1002D677 10K OHM 1/10 W 5% 1608 R/TP
R720 0RJ1201D677 1200 OHM 1/10 W 5% 1608 R/T
R729 0RJ4702D677 47000 OHM 1/10 W 5% 1608 R/
R770 0RJ0562D677 56 OHM 1/10 W 5% 1608 R/TP
R771 0RJ1501D677 1.5K OHM 1/10 W 5% 1608 R/T
R773 0RJ3000D677 300 OHM 1/10 W 5% 1608 R/TP
R774 0RJ0682D677 68 OHM 1/10 W 5% 1608 R/TP

X301 6202TST003G HC-49/SM5H KONY 24.576MHZ +
U303 6620F00017A CCSD-32T-SM WOOYOUNG 32P PL
TU701 6700VS0003H TAEW-G053P LGIT MULTI FS PH

ZD504 0DZ560009CF MTZJ5.6B TP ROHM-K DO34 0.5
U501 6712SCA232A TSOP34838SO1 VISHAY 38KHZ L
LED551 0DLBE0048AA BRIGHT LED ELECTRONICS BL-H
LED552 0DLBE0048AA BRIGHT LED ELECTRONICS BL-H

DATE: 2005. 11. 13.

*S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

Q551 0TR390409AE FAIRCHILD KST3904(LGEMTF) T
R551 0RJ1001D677 1K OHM 1/10 W 5% 1608 R/TP
R552 0RJ3001D677 3K OHM 1/10 W 5% 1608 R/TP
R553 0RJ1001D677 1K OHM 1/10 W 5% 1608 R/TP
R554 0RJ3001D677 3K OHM 1/10 W 5% 1608 R/TP
ZD501 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD502 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD503 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD504 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
ZD505 0DZ560009DA UDZ S 5.6B TP ROHM-K SOD323
IR 3508V00069A "PLATE (CF-29H40,LED)"

C501 0CN1040K949 "0.1UF D 50V 80%,-20% F(Y5V)"
C504 0CN1040K949 "0.1UF D 50V 80%,-20% F(Y5V)"
R502 0RN2201F409 2.2K OHM 1/6 W 1.00% TA52
R503 0RN8200F409 820 1/6W 1% TA52
R504 0RN1501F409 1.5K OHM 1/6 W 1.00% TA52
R505 0RN1501F409 1.5K OHM 1/6 W 1.00% TA52
R507 0RN8200F409 820 1/6W 1% TA52
R508 0RN2201F409 2.2K OHM 1/6 W 1.00% TA52
SW501 140-058B EVQ PB2 05K MATUSHITA NON 1
SW502 140-058B EVQ PB2 05K MATUSHITA NON 1
SW503 140-058B EVQ PB2 05K MATUSHITA NON 1
SW504 140-058B EVQ PB2 05K MATUSHITA NON 1
SW505 140-058B EVQ PB2 05K MATUSHITA NON 1
SW506 140-058B EVQ PB2 05K MATUSHITA NON 1
SW507 140-058B EVQ PB2 05K MATUSHITA NON 1
SW508 140-058B EVQ PB2 05K MATUSHITA NON 1
ZD502 0DZ560009CF MTZJ5.6B TP ROHM-K DO34 0.5
ZD505 0DZ560009CF MTZJ5.6B TP ROHM-K DO34 0.5

- 30 -

LED&IR BOARD

OTHERs

CONTROL BOARD

- 30 -

- 31 -

- 32 -

- 33 -

- 34 -

Nov., 2005

Printed in KoreaP/NO : 38289S0022X