Lexus HS 250h Navigation Manual

Table of Contents

Quick guide —

— Remote Touch 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

— Map screen 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

— Registering home 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

— Registering preset destinations 11. . . . . . . . . . . . . . . . . .

— Operation flow: guiding the route 13. . . . . . . . . . . . . . . . .

— Setting home as the destination 15. . . . . . . . . . . . . . . . . .

Quick reference (“Start” screen) 17. . . . . . . . . . . . . . . . . . . .

Quick reference (“Destination” screen) 18. . . . . . . . . . . . . .

Quick reference (“Setup” screen) 20. . . . . . . . . . . . . . . . . . .

Quick reference (“Information” screen) 21. . . . . . . . . . . . . .

1 Navigation System: Basic Functions

Basic information before operation

Initial screen 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

How to use the Remote Touch 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inputting letters and numbers/List screen operation 33. . . . . . . . . . . .

Screen adjustment 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Display operation 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Help icon 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Map screen operation 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Current position display 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen scroll operation 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching the screens 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Map scale 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Foot print map 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Orientation of the map 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Standard map icons 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voice command system 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Natural speech information 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command list 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Quick
Guide

2 Navigation System: Destination Search

Destination search 68. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting the search area 68. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Destination search by Home 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Destination search by Preset destinations 70. . . . . . . . . . . . . . . . .

Destination search by “Address” 71. . . . . . . . . . . . . . . . . . . . . . . . .

Destination search by “Point of Interest” 75. . . . . . . . . . . . . . . . . . .

Destination search by “Destination Assist” 82. . . . . . . . . . . . . . . . .

Destination search by “Previous Destinations” 82. . . . . . . . . . . . .

Destination search by “Address Book” 83. . . . . . . . . . . . . . . . . . . .

Destination search by “Emergency” 83. . . . . . . . . . . . . . . . . . . . . . .

Destination search by “Intersection & Freeway” 84. . . . . . . . . . . .

Destination search by “Map” 87. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Destination search by “Coordinates” 88. . . . . . . . . . . . . . . . . . . . . .

Deleting set destinations 88. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Starting route guidance 89. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Navigation System: Route Guidance

Route guidance screen 94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Typical voice guidance prompts 97. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Distance and time to destination 99. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting and deleting destinations 100. . . . . . . . . . . . . . . . . . . . . . . .

Adding destinations 100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reordering destinations 100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Deleting destinations 101. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting route 102. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Detour setting 102. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Route overview 103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Route preference 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pausing and resuming guidance 107. . . . . . . . . . . . . . . . . . . . . . .

Show on map 108. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Display POI* icons 108. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Route trace 112. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

*: Point of Interest

4 Navigation System: Memory Points

Navigation settings 116. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting up the “Home” 117. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting up the “Preset Destinations” 119. . . . . . . . . . . . . . . . . . . . .

Setting up the “Address Book” 122. . . . . . . . . . . . . . . . . . . . . . . . .

Setting up the “Areas to Avoid” 128. . . . . . . . . . . . . . . . . . . . . . . . .

Deleting previous destinations 133. . . . . . . . . . . . . . . . . . . . . . . . .

5 Telephone And Information

Telephone (Hands-free system for cellular phone) 136. . . . . . . .

Enter a Bluetooth phone 140. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Call on the Bluetooth phone 145. . . . . . . . . . . . . . . . . . . . . . . . . . .

Receive on the Bluetooth phone 152. . . . . . . . . . . . . . . . . . . . . . .

Talk on the Bluetooth phone 152. . . . . . . . . . . . . . . . . . . . . . . . . . .

Fuel consumption 155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Calendar 156. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 Lexus Enform with Safety Connect

Lexus Enform with Safety Connect-Overview 158. . . . . . . . . . . . . . . .

Destination Assist 161. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

eDestination 163. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

XMR Sports and Stocks 166. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

XM NavWeathert 171. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

XMR NavTraffic 175. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lexus Insider 178. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 Audio/Video System

Quick reference 186. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using your audio/video system 189. . . . . . . . . . . . . . . . . . . . . . . . . .

Some basics 189. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Radio operation 197. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CD changer operation 208. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD changer operation 222. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bluetooth audio operation 247. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

USB memory player/iPod player operation 255. . . . . . . . . . . . . . .

Audio/video remote controls 263. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Audio/video system operating hints 264. . . . . . . . . . . . . . . . . . . . . . . .

8 Air Conditioning

Automatic air conditioning controls 274. . . . . . . . . . . . . . . . . . . . . . . . .

9 Rear View Monitor System

Rear view monitor system 288. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 Wide View Front Monitor System

Wide view front monitor system 294. . . . . . . . . . . . . . . . . . . . . . . . . . .

11 Intuitive Parking Assist

Intuitive parking assist 302. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 Setup

General settings 310. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Clock settings 316. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voice settings 318. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Navigation settings 321. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Detailed navigation settings 321. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Telephone settings 330. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Volume setting 331. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manage phone 332. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phonebook 340. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the phonebook 341. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Speed dials setting 349. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Deleting call history 356. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the voice tag 357. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BluetoothR 361. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Details 366. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Audio settings 369. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Select portable player 369. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting BluetoothR audio 371. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Vehicle settings 376. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance 376. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Vehicle customization 381. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lexus parking assist setting 382. . . . . . . . . . . . . . . . . . . . . . . . . . .

Other settings 384. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13 Appendix

Limitations of the navigation system 388. . . . . . . . . . . . . . . . . . . . . . . .

Map database information and updates 390. . . . . . . . . . . . . . . . . . . . .

Introduction

This manual explains the operation of the Navigation System.
Please read this manual carefully to ensure proper use. Keep this
manual in your vehicle at all times.

The Navigation System is one of the most technologically advanced
vehicle accessories ever developed. The system receives satellite sig­nals from the Global Positioning System (GPS) operated by the U.S.
Department of Defense. Using these signals and other vehicle sen­sors, the system indicates your present position and assists in locating
a desired destination.

The navigation system is designed to select efficient routes from your
present starting location to your destination. The system is also designed
to direct you to a destination that is unfamiliar to you in an efficient manner.
The system uses DENSO maps. The calculated routes may not be the
shortest nor the least traffic congested. Your own personal local knowl­edge or “short cut” may at times be faster than the calculated routes.

The navigation system’s database includes Point of Interest categories to
allow you to easily select destinations such as restaurants and hotels. If
a destination is not in the database, you can enter the street address or
a major intersection close to it and the system will guide you there.

The system will provide both a visual map and audio instructions. The au­dio instructions will announce the distance remaining and the direction to
turn in approaching an intersection. These voice instructions will help you
keep your eyes on the road and are timed to provide enough time to allow
you to maneuver, change lanes or slow down.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

1

Please be aware that all current vehicle navigation systems have
certain limitations that may affect their ability to perform properly.
The accuracy of the vehicle’s position depends on the satellite con­dition, road configuration, vehicle condition or other circumstan­ces. For more information on the limitations of the system, refer to
pages 388 through 389.

2

2010 HS250h Navigation from July.09 Prod.(OM75015U)

CAUTION

Important information about

this manual

Safety Instruction

For safety reasons, this manual indicates
items requiring particular attention with the
following marks.

This is a warning against anything
which may cause injury to people if
the warning is ignored. You are in­formed about what you must or must
not do in order to reduce the risk of
injury to yourself and others.

NOTICE

This is a warning against anything
which may cause damage to the ve­hicle or its equipment if the warning
is ignored. You are informed about
what you must or must not do in or­der to avoid or reduce the risk of dam­age to your vehicle and its equip­ment.

INFORMATION

This provides additional information.

U0001LC

To use this system in the safest possible
manner, follow all the safety tips shown be­low.

This system is intended to assist in reach­ing the destination and, if used properly,
can do so. The driver is solely responsible
for the safe operation of your vehicle and
the safety of your passengers.

Do not use any feature of this system to the
extent it becomes a distraction and pre­vents safe driving. The first priority while
driving should always be the safe opera­tion of the vehicle. While driving, be sure
to observe all traffic regulations.

Prior to the actual use of this system, learn
how to use it and become thoroughly famil­iar with it. Read the entire Navigation Sys­tem Owner’s Manual to make sure you un­derstand the system. Do not allow other
people to use this system until they have
read and understood the instructions in
this manual.

For your safety, some functions may be­come inoperable when driving. Unavail­able screen buttons are dimmed. Only
when the vehicle is not moving, can the
destination and route selection be done.

3

2010 HS250h Navigation from July.09 Prod.(OM75015U)

CAUTION

 For safety, the driver should not

operate the navigation system
while he/she is driving. Insufficient
attention to the road and traffic
may cause an accident.

 While driving, be sure to obey the

traffic regulations and maintain
awareness of the road conditions.
If a traffic sign on the road has been
changed, route guidance may pro­vide wrong information such as the
direction of a one way street.

While driving, listen to the voice instruc­tions as much as possible and glance at
the screen briefly and only when it is safe.
However, do not totally rely on voice guid­ance. Use it just for reference. If the sys­tem cannot determine the current vehicle
position correctly, there is a possibility of
incorrect, late, or non−voice guidance.

The data in the system may occasionally
be incomplete. Road conditions, including
driving restrictions (no left turns, street clo­sures, etc.) frequently change. Therefore,
before following any instruction from the
system, look to see whether the instruction
can be done safely and legally.

This system cannot warn about such
things as the safety of an area, condition of
streets, and availability of emergency ser­vices. If unsure about the safety of an
area, do not drive into it. Under no cir-

cumstances is this system a substitute
for the driver’s personal judgement.

Use this system only in locations where it
is legal to do so. Some states/provinces
may have laws prohibiting the use of video
and navigation screens next to the driver.

4

2010 HS250h Navigation from July.09 Prod.(OM75015U)

Quick guide —

— Remote Touch

U0001AASLY

5

2010 HS250h Navigation from July.09 Prod.(OM75015U)

No. Name Function Page

1

“MENU” button

2

“Ɯ·Ɲ” button

“MAP/VOICE”

3

button

Remote Touch

4

knob

5

“ENTER” button

6

“DISP” button

Push this button to display the “Start”
(menu) screen.

Push this button to change the scale of
the map and to scroll the list screen.

Push this button to repeat a guidance
voice, cancel the map scroll, start guid­ance and display the current position.

Move this knob in the desired direction
to select a function, letter and map
screen button.

Push this button to enter the selected
function, letter or map screen button.

Push this button to display the “Display”
(quality control) screen.

17

31, 35, 48

39

31

31

36

6

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U0003AASLY

— Map screen

No. Name Function Page

North−up or

1

heading−up
symbol

2

Scale indicator This figure indicates the map scale. 48

3

Zoom out button

4

“Off”

5

“Mark”

6

“Route” Select this button to change the route. 100, 102

This symbol indicates a map view with
north−up or heading−up. Selecting this
symbol changes the map orientation.

Select this button to reduce the map
scale.

Select this button to obtain a broader
view. Some of the buttons on the screen
are not displayed. They are displayed
again by selecting “On”.

Select this button to register the current
position or the cursor position as an ad­dress book entry.

49

48

327

41

7

2010 HS250h Navigation from July.09 Prod.(OM75015U)

No. Name Function Page

Select this button to browse information

7

“Show on Map”

about guidance route, to set the Points
of Interest to be displayed on the

108, 175

screen, or to record the route.

8

Zoom in button
Foot print map

9

button
Screen

10

configuration
button

Distance and time

11

to destination

12

XM indicator
“GPS” mark

(Global

13

Positioning
System)

Select this button to magnify the map
scale.

Select this button to display the foot print
map and the building information.

Select this button to change the screen
mode.

Displays the distance, the estimated
travel time to the destination, and the
estimated arrival time at the destination.

This mark is displayed when XM infor­mation is received.

Whenever the vehicle is receiving sig­nals from the GPS, this mark is dis­played.

48

48

45

99

175

388

8

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U0002AASLY

— Registering home

U0001LS

U0002LS

1 Push the “MENU” button.

2 Select “Destination” and push

the “ENTER” button.

3

Select “Go Home” and push the
“ENTER” button.

If home has not been registered, you can
register it by selecting “Go Home”.

4 Select “Yes” and push the “EN-

TER” button.

U0009LS

9

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U0004LC

U0005LC

U0006LC

5 There are 4 different methods to

search your home.

See “Destination search” on page 68.

6 Select “Enter” and push the “EN-

TER” button.

The “Edit Home” screen is displayed.

7 Select “OK” and push the “EN-

TER” button.

Registration of home is complete.
You can also register home by selecting

“Setup”. (See “ (a) Registering home” on
page 117.)

You can change the name, location, phone
number and icon. (See
on page 118.)

“ (b) Editing home”

10

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U0002AASLY

— Registering preset destinations

U0001LS

1 Push the “MENU” button.

2 Select “Destination” and push

the “ENTER” button.

3 Select one of the preset destina-

tion buttons and push the “EN­TER” button.

U0003LS

You can set a preset destination to any pre­set destination button that has not yet been
set.

4 Select “Yes” and push the “EN-

TER” button.

U0010LS

2010 HS250h Navigation from July.09 Prod.(OM75015U)

11

U0009LC

U0010LC

U0011LC

5 There are 4 different methods to

search preset destinations.

See “Destination search” on page 68.

6 Select “Enter” and push the “EN-

TER” button.

The “Edit Preset Destination” screen is dis­played.

7 Select “OK” and push the “EN-

TER” button.

Registration of preset destinations is com­plete.

You can also register preset destinations
by selecting “Setup”.
(See “ (a) Registering preset destinations”
on page 120.)

You can change the name, location, phone
number and icon. (See
destinations” on page 121.)

The registered points can be used on the
“Destination” screen. (See “ — Destination
search by Preset destinations” on page

70.)

“ (b) Editing preset

12

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U0002AASLY

— Operation flow: guiding the route

U0001LS

U0004LS

1 Push the “MENU” button.

2 Select “Destination” and push

the “ENTER” button.

3 There are 1 1 different methods to

search destinations.

See “Destination search” on page 68.

U0013LC

2010 HS250h Navigation from July.09 Prod.(OM75015U)

4

Select “Go to ” and push the
“ENTER” button.

The navigation system performs a search
for the route.

13

U0014LC

5 Select “OK” and push the “EN-

TER” button, and start driving.

Routes other than the one recommended
can also be selected. (See “Starting route
guidance” on page 89.)

6 Guidance to the destination is

given via voice and on the guid­ance screen.

14

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U0002AASLY

— Setting home as the destination

U0002LS

1 Push the “MENU” button.

2 Select “Destination” and push

the “ENTER” button.

3

Select “Go Home” and push the
“ENTER” button.

“Go Home” can be used if your home has

been registered. (To register “Home”, see
“ (a) Registering home” on page 117.)

U0016LCa

2010 HS250h Navigation from July.09 Prod.(OM75015U)

4 Select “Go to ” and push the

“ENTER” button.

The navigation system performs a search
for the route.

15

U0017LCa

5 Select “OK” and push the “EN-

TER” button, and start driving.

Routes other than the one recommended
can also be selected. (See “Starting route
guidance” on page 89.)

6 Guidance to the destination is

given via voice and on the guid­ance screen.

16

2010 HS250h Navigation from July.09 Prod.(OM75015U)

To display the “Start” screen, push the “MENU” button on the Remote Touch.

Quick reference (“Start” screen)

1

“Destination”

You can use one of 10 different methods to

search your destination. 18, 67. . . . . . . .

2

“Info./Phone”

Select this button to operate the hands−
free system and display fuel economy in-

formation, etc. 21, 135. . . . . . . . . . . . . . . .

3

“Setup”

Select this button to adjust settings of the
navigation, audio and hands−free sys-

tems, etc. 20, 309. . . . . . . . . . . . . . . . . . .

2010 HS250h Navigation from July.09 Prod.(OM75015U)

4

“Climate”

Select this button to operate the air condi-

tioning system. 273. . . . . . . . . . . . . . . . . .

5

“Audio”

Select this button to operate the audio sys-

tem. 185. . . . . . . . . . . . . . . . . . . . . . . . . . .

17

The “Destination” screen allows you to search for a destination. To display the “Destina-

Quick reference (“Destination” screen)

tion” screen, push the “MENU” button and select “Destination”.

U0006LS

1

“Address”

A house number and the street address
can be input by using the input keys.

2

“Point of Interest”

Select one of the many Points of Interest
that have already been stored in the sys-

tem’s database. 75. . . . . . . . . . . . . . . . . .

3

“Destination Assist”

Provides you with live assistance finding
destinations via the Lexus Enform re-

sponse center 161. . . . . . . . . . . . . . . . . . .

71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

2010 HS250h Navigation from July.09 Prod.(OM75015U)

4

“Previous Destinations”

A destination can be selected from any of
the last 100 previously set destinations
and from the previous starting point.

82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

“Del. Dest.”

Set destinations can be deleted. 88. . . .

6

“?”

Function help for the “Destination” screen

can be viewed on this screen. 39. . . . . .

7

“Address Book”

The desired location can be selected from
a registered entry in the “Address book”.
(To register address book entries, see “(a)
Registering address book entries” on page

123.)

83. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

“Emergency”

One of the four categories of emergency
service points that are already stored in the
system’s database can be selected.

83. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

“Intersection & Freeway”

The names of two intersecting streets or a
freeway (interstate) entrance or exit can be
entered. This is helpful if only the general
vicinity, not the specific address, is known.

84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

“Map”

A destination can be selected simply by
selecting the location on the displayed

map. 87. . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

“Coordinates”

A destination can be set using latitudes

and longitudes as coordinates. 88. . . . .

12

Preset destination buttons

One of 5 preset destination points can be
selected by selecting the screen directly.
If a preset destination point has not been
registered, a message will be displayed
and the setting screen will automatically
appear. To use this function, it is neces­sary to set the “preset destination”. (To
register a “Preset Destination”, see “(a)
Registering preset destinations” on page

120.) 70. . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

“Go Home”

A personal home address can be selected
without entering the address each time. If
“Home” has not been registered, a mes­sage will be displayed and the setting
screen will automatically appear. To use
this function, it is necessary to set a
“Home” address. (To register “Home”, see
“(a) Registering home” on page 117.)

70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2010 HS250h Navigation from July.09 Prod.(OM75015U)

19

The items shown on the “Setup” screen can be set. To display the “Setup” screen, push

Quick reference (“Setup” screen)

the “MENU” button and select “Setup”.

1

“General”

Settings are available for language selec­tion, operation sounds, automatic screen

change, etc. 310. . . . . . . . . . . . . . . . . . . .

2

“Clock”

Used for changing settings for time zones,

daylight saving time, etc. 316. . . . . . . . . .

3

“Voice”

Voice guidance can be set. 318. . . . . . .

4

“Navi.”

Settings are available for average cruising
speed, displayed screen contents, POI

icon categories, etc. 321. . . . . . . . . . . . . .

20

2010 HS250h Navigation from July.09 Prod.(OM75015U)

5

“Other”

Settings are available for Lexus Insider,

XM Sports and Stocks. 384. . . . . . . . . .

6

“Vehicle”

Settings are available for vehicle informa­tion such as maintenance information.

376. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

“Audio”

Settings are available for portable audio
devices, Bluetooth audio devices etc.

369. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

“Phone”

Bluetooth phones and phone numbers
can be registered, and the receiver volume

can be adjusted. 330. . . . . . . . . . . . . . . . .

This screen can be used to display the calendar and information on operation of the

Quick reference (“Information” screen)

hands−free phone, etc. To display the “Information” screen, push the “MENU” button
and select “Info./Phone”.

1

“Phone”

To view hands free phone information.

140. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

“Fuel Consumption”

Fuel consumption is displayed. 155. . . .

3

“Map Data”

Displays information regarding the map
data disc version or coverage area.

399. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

“Calendar”

To view calendar. 156. . . . . . . . . . . . . . . .

2010 HS250h Navigation from July.09 Prod.(OM75015U)

5

“XM NavWeather”

To display the “XM NavWeather” screen.

171. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

“XM Stocks”

To display the “XM Stocks” screen.

166. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

“XM Sports”

To display the “XM Sports” screen.

166. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

“LEXUS Insider”

To display the “LEXUS Insider” screen.

178. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

NAVIGATION SYSTEM: BASIC FUNCTIONS

SECTION 1

NAVIGATION SYSTEM:
BASIC FUNCTIONS

Basic information before operation

 Initial screen 30

 How to use the Remote Touch 31

 Inputting letters and numbers/List screen operation 33

 Screen adjustment 36

 Display operation 38

 Help icon 39

 Map screen operation 39

Current position display 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen scroll operation 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching the screens 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Map scale 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Foot print map 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Orientation of the map 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Standard map icons 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 Voice command system 50

Natural speech information 53. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command list 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2010 HS250h Navigation from July.09 Prod.(OM75015U)

29

NAVIGATION SYSTEM: BASIC FUNCTIONS

CAUTION

Initial screen

U1001LS

When the “POWER” switch is in ACCES­SORY or ON mode, the initial screen will
be displayed and the system will begin
operating.

When the vehicle is stopped with the
hybrid system operating, always ap­ply the parking brake for safety.

After a few seconds, the “CAUTION”
screen will be displayed.

U1002LC

After about 5 seconds, the “CAUTION”
screen automatically switches to the map
screen. When selecting “Show Map” or
pushing the “MAP/VOICE” button, the
map screen is displayed.

30

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

How to use the Remote

 Maintenance information

This system informs about when to replace
certain parts or components and shows
dealer information (if registered) on the
screen.

When the vehicle reaches a previously set
driving distance or date specified for a
scheduled maintenance check, the “Infor­mation” screen will be displayed when the
navigation system is in operation.

U1057LC

To disable this screen, select “Do Not
Display This Message Again”. This
screen goes off if the screen is not op­erated for several seconds.

To prevent this information screen from be­ing displayed again, select “Do Not
Display This Message Again”.

To register “Maintenance information”, see
“—Maintenance” on page 376.

Touch

This navigation system can be operated by
the Remote Touch when the “POWER”
switch is in ACCESSORY or ON mode.

U1007AASLY

A pointer is shown on the screen. Use the
Remote Touch knob to move the pointer
and select the buttons on the screen.

U1008AASLY

To select a button on the screen, place the
pointer on top of the button and then push
the “ENTER” button on the Remote
Touch. Once a button has been selected,
the screen will change.

When the pointer moves close to a button,
it will be automatically pulled onto that but­ton. The strength of this pull can be ad­justed. (See page 313.)

The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.

31

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

CAUTION

Pointer shape can be changed. (See page

314.)

: Change to an arrow.

: Change to a left hand.

: Change to a right hand.

: Display of the pointer can be

turned off. (Even if display of the pointer is
turned off, the pointer will appear on the
map screen as “+”.)

Push the “Ɯ” button on the Remote Touch
to zoom in on the map screen and “Ɲ” to
zoom out. These buttons can also be used
to scroll up and down on list screens.

Push the “MENU” button to set a destina­tion or adjust settings for the audio system,
air conditioning system, etc.

You can return to the map screen by push­ing the “MAP/VOICE” button.

 Do not allow fingers, fingernails or

hair to become caught in the
Remote Touch as this may cause
an injury.

 Be careful when touching the

Remote Touch in extreme tempera­tures as it may become very hot or
cold due to the temperature inside
the vehicle.

NOTICE

 Do not allow the Remote Touch to

come into contact with food, liq­uid, stickers or lit cigarettes as do­ing so may cause it to change col­or, emit a strange odor or stop
functioning.

 Do not subject the Remote Touch

to excessive pressure or strong
impact as the knob may bend or
break off.

 Do not allow coins, contact lenses

or other such items to become
caught in the Remote T ouch as this
may cause it to stop functioning.

 Items of clothing may rip if they be-

come caught on the Remote Touch
knob.

 If your hand or any object is on the

Remote Touch knob when the
“POWER” switch is turned to AC­CESSORY mode, the Remote
Touch knob may not operate prop­erly.

INFORMATION

Under extremely cold conditions, the
Remote Touch knob may react slow­ly.

32

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

Inputting letters and

numbers/List screen
operation

When searching for an address or a name,
or entering, letters and numbers can be in­put via the screen.

INFORMATION

Keyboard layout can be changed.
(See page 312.)

 To input letters and numbers

To display the alphabet keys, select
“A−Z”.

U1004LC

Enter letters by selecting the keys directly.

: Selecting this button erases one

letter. By holding this button, let­ters will continue to be erased.

On certain letter entry screens, letters can
be entered in upper or lower case.

U1005LC

: To enter in lower case.

: To enter in upper case.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

33

NAVIGATION SYSTEM: BASIC FUNCTIONS

 To input symbols

To display symbol keys, select “Other”.

U1006LC

Enter symbols by selecting the symbol
keys directly.

: Selecting this button erases one

letter. By holding this button, let­ters will continue to be erased.

 To display the list

U1007LC

To search for an address or a name, select
“OK”. Matching items from the database
are listed even if the entered address or
name is incomplete.

If the number of matches is five or less, the
list is displayed without selecting “OK”.

U1008LC

34

INFORMATION

The number of matching items is
shown to the right side of the screen.
If the number of matching items is
more than 999, the system displays

∗∗” on the screen.

“

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

 List screen operation

When a list is displayed, use the appropri­ate button to scroll through the list.

U1009LC

To shift to the next or previous
page.

Select or to scroll through

the displayed list.

This expresses a displayed screen
position.

If appears to the right of the
item name, the complete name is
too long for the display. Select
to scroll to the end of the name.

Select to scroll to the beginning
of the name.

INFORMATION

The “Ɯ” or “Ɲ” buttons on the
Remote Touch can be used to scroll
up and down on list screens.

 Sorting

The order of a list displayed on the screen
can be rearranged.

U1010LC

1. Select “Sort”.

U1011LC

2. Select the desired sorting criteria.

Sorting criteria are as follows:
“Distance”: To sort in the order of dis-

tance from your current location.

“Date”: To sort in the order of the date.
“Category”: To sort in the order of the

category.

“Icon”: To sort in the order of the icons.
“Name”: To sort in order by name.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

35

NAVIGATION SYSTEM: BASIC FUNCTIONS

Screen adjustment

You can adjust the contrast, brightness,
color and tone of the screen. You can also
turn the display off, and change the screen
to either day or night mode.

 Contrast, brightness, color and tone

adjustment

The contrast, brightness, color and tone of
the screen can be adjusted depending on
the brightness of your surroundings. You
can also turn the display off.

U1001AASLY

1. Push the “DISP” button.

U1002LS

Contrast and brightness adjustment

2. Select the desired button to adjust
contrast and brightness.

“Contrast” “

of the screen.

“Contrast” “

the screen.

“Brightness” “
“Brightness” “

3. After adjusting the screen, select
“OK”.

The screen goes off when “Screen Off” is
selected. To turn the display screen back
on, push the “DISP” button again.

+”: Strengthens the contrast
–”: Weakens the contrast of

+”: Brightens the screen.
–”: Darkens the screen.

36

INFORMATION

When you do not select any button on
the “Display” screen for 20 seconds,
the previous screen will be displayed.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U1003LS

NAVIGATION SYSTEM: BASIC FUNCTIONS

 Changing between day mode and

night mode

Depending on the position of the headlight
switch, the screen changes to day mode or
night mode.

Color and tone adjustment

1. Select the desired button to adjust
color and tone.

You can adjust the color and the tone while
the DVD video, DVD audio and video CD
are being played.

“Color” “R”: Strengthens the red color of
the screen.

“Color” “G”: Strengthens the green color
of the screen.

“Tone” “

screen.

“Tone” “

screen.

2. After adjusting the screen select
“OK”.

The screen goes off when “Screen Off” is
selected. To turn the display screen back
on, push the “DISP” button again.

+”: Strengthens the tone of the

–”: Weakens the tone of the

INFORMATION

When you do not select any button on
the “Display” screen for 20 seconds,
the previous screen will be displayed.

U1004LS

To display the screen in day mode even
with the headlight switch on, select
“Day Mode” on the adjustment screen
for brightness and contrast control.

If the screen is set in day mode with the
headlight switch turned on, this condition is
memorized even with the hybrid system
turned off.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

37

NAVIGATION SYSTEM: BASIC FUNCTIONS

CAUTION

CAUTION

Display operation

U1004AASLY

Push the “OPEN/CLOSE” button to
open or close the display.

While you are using the navigation system,
turning the “POWER” switch off will turn off
the system. The display will open when the
“POWER” switch is turned to
ACCESSORY or ON mode.

The navigation system can be used when
the “POWER” switch is in the ACCESSO­RY or ON mode.

Take care not to jam your hand while
opening/closing the display. Other­wise you could be injured.

NOTICE

Do not obstruct the display while it is
opening/closing. It could damage
your navigation system.

U1005AASLY

When the display is hard to be read due
to the lights from your surroundings,
the display can be tilted.

The display will automatically resume the
previous position you used when the en­gine switch is turned to ACCESSORY or
ON mode.

Take care not to jam your hand while
tilting the display. Otherwise, you
could be injured.

NOTICE

Do not obstruct the display while it is
tilting. It could damage your naviga­tion system.

38

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

Help icon

Map screen operation —

— Current position display

When
planation of the function can be displayed.

1. Select .

appears on the screen, an ex-

U1007LS

2. Select the button of the desired
function.

U1006LS

When starting the navigation system, the
current position is displayed first.

This screen displays the current vehicle
position and a map of the surrounding local
area.

U1053LC

The current vehicle position mark (1) ap­pears in the center or bottom center of the
map screen.

A street name will appear on the bottom of
the screen, depending on the scale of the

2

map (
You can return to this map screen that

shows your current position at any time
from any screen by pushing the “MAP/
VOICE” button.

While driving, the current vehicle position
mark is fixed on the screen and the map
moves.

The current position is automatically set as
the vehicle receives signals from the GPS
(Global Positioning System). If the current
position is not correct, it is automatically
corrected after the vehicle receives sig­nals from the GPS.

).

INFORMATION

 After 12−volt battery disconnec-

tion, or on a new vehicle, the cur­rent position may not be correct.
As soon as the system receives
signals from the GPS, the correct
current position is displayed.

 To correct the current position

manually, see page 327.

39

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

— Screen scroll operation

When any point on the map is selected,
that point moves to the center of the screen
and is shown by the cursor mark (

1

).

U1054LC

Use the scroll feature to move the desired
point to the center of the screen for looking
at a point on the map that is different from
the current position of the vehicle.

To scroll over the map, place the pointer in
a position near the desired destination and
then press and hold the “ENTER” button.
The map will continue scrolling in that di­rection until the button is released.

A street name, city name, etc. of the se­lected point will be shown, depending on
the scale of the map (
the current position to
shown (

After the screen is scrolled, the map re­mains centered at the selected location
until another function is activated. The cur­rent vehicle position mark will continue to
move along your actual route and may
move off the screen. When the “MAP/
VOICE” button is pushed, the current ve­hicle position mark returns to the center of
the screen and the map moves as the ve­hicle proceeds along the designated route.

3

).

2

). Distance from

will also be

 To set the cursor position as a des-

tination

A specific point on the map can be set as
a destination using the scroll function.

U1055LC

Select “Enter ”.

The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

When the scroll feature is used, the
current vehicle position mark may
disappear from the screen. Move the
map with a scroll again or push the
“MAP/VOICE” button to return to the
current vehicle position map location
display.

40

INFORMATION

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

 To register the cursor position as an

address book entry

Address book entry registration enables
easy access to a specific point.

U1056LC

Select “Mark”.

When you select “Mark”, the following
screen appears for a few seconds, and
then the map screen returns.

U1021LC

To change the icon or name, etc., see “ (b)
Editing address book entries” on page

124.
Up to 100 address book entries can be reg-

istered. If there is an attempt to register
more than 100 address book entries, an
error message will appear.

U1022LC

The registered point is shown by on the
map.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

41

NAVIGATION SYSTEM: BASIC FUNCTIONS

 To see information about the icon

where the cursor is set

U1023LC

To display information about an icon, set
the cursor on it.

POI INFORMATION

When the cursor is set on a POI icon, the
name and “Info.” are displayed at the top
of the screen.

U1024LC

Select “Info.”.

U1025LC

Information such as the name, address,
and phone number are displayed.

If “Enter
cursor is set as a destination.

If there is already a set destination, “Go to

” and “Add to Route” are displayed.

“Go to

tions and set a new one.
“Add to Route”: To add a destination.
To register this POI as an address book

entry, select “Mark”. (See page 123.)

” is selected, the position of the

”: To delete the existing destina-

42

If
phone number can be called.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

is selected, the registered tele-

NAVIGATION SYSTEM: BASIC FUNCTIONS

INFORMATION

The desired Point of Interest can be
displayed on the map screen. (See
“ — Display POI icons” on page 108.)

ADDRESS BOOK ENTRY
INFORMATION

When the cursor is set on an address book
entry icon, the name and “Info.” are dis­played at the top of the screen.

U1026LC

Select “Info.”.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

43

NAVIGATION SYSTEM: BASIC FUNCTIONS

DESTINATION INFORMATION

When the cursor is set on a destination
icon, the name and “Info.” are displayed
on the top of the screen.

U1027LC

Information such as the name, address,
and phone number are displayed.

If “Enter
cursor is set as a destination.

If there is already a set destination, “Go to

” and “Add to Route” are displayed.

“Go to

tions and set a new one.
“Add to Route”: To add a destination.
To edit an address book entry, select

“Edit”. (See “(b) Editing address book en­tries” on page 124.)

To delete an address book entry, select
“Delete”.

If
phone number can be called.

” is selected, the position of the

”: To delete the existing destina-

is selected, the registered tele-

U1028LC

Select “Info.”.

U1029LC

Information such as the name, address,
and phone number are displayed.

To delete a destination, select “Delete”.

If
phone number can be called.

is selected, the registered tele-

44

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

— Switching the screens

XM NavTraffic TEXT INFORMATION

When you select the XM NavTraffic icon
on the map, the XM NavTraffic info. bar
will appear on the upper part of the screen.

U1059LC

Select “Info.”.

U1060LC

Traffic information is displayed on the
screen.

Select “Detail” to display detailed traffic
event information.

Any one of the screen configurations can
be selected .

U1030LC

1. Select this button to display the fol­lowing screen.

U1031LC

2. To select the desired screen config­uration, select one of the following but­tons.

U1061LC

45

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

Depending on the conditions, certain
screen configuration buttons cannot be
selected.

:

To display the single map screen.
(See page 46.)

:

To display the dual map screen.
(See page 47.)

:

To display the compass mode
screen. (See page 47.)

:

To display the freeway screen.
(See page 94.)

:

To display the turn list screen.
(See page 96.)

:

To display the arrow screen. (See
page 96.)

:

To display the intersection guid­ance screen or the guidance
screen on the freeway. (See page

95.)

 Screen configurations

SINGLE MAP

This is a regular map screen.
While on a different screen, selecting

will display the single

map screen.

U1032LC

The screen shows the single map.

46

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

DUAL MAP

A map can be displayed split in two.
While on a different screen, selecting

will display the dual map

screen.

U1033LC

The screen shows the dual map. The map
on the left is the main map.

The right side map can be edited by select­ing any specific point on the right side map.

U1062LC

COMPASS MODE

Current vehicle position is indicated with a
compass.

While on a different screen, selecting

will display the compass

mode screen.

U1035LC

Information about the destination and cur­rent position, as well as a compass, is dis­played on the screen.

The destination mark is displayed in the di­rection of the destination. When driving re­fer to the longitude and latitude coordi­nates, and the compass, to make sure that
your vehicle is headed in the direction of
the destination.

INFORMATION

This screen can perform the following pro­cedures:

1. Changing the map scale

2. Displaying the POI icon

3. Show XM NavTraffic Info. (See page

175.)

4. Changing the orientation of the map

Select “OK” when you complete edi­ting.

The screen returns to the dual map screen.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

When the vehicle travels out of the
coverage area, the guidance screen
changes to the compass mode
screen.

47

NAVIGATION SYSTEM: BASIC FUNCTIONS

— Map scale

— Foot print map

U1036LC

Select or to change the scale
of the map display. The scale bar and indi-

cator at the bottom of the screen indicates
the map scale menu. The scale range is
150 feet (50 m) to 250 miles (400 km).

For the area which is covered by the foot
print map (Some areas in the following
cities: Detroit, Chicago, N.Y., L.A.), you
can switch to the foot print map on a scale
of 75 feet (25 m).

 To switch to the foot print map

changes into when the map

is scaled down to 150 feet (50 m).

U1037LC

Select
changes normally. By continuing to select

the button, the scale bar changes smooth­ly.

The scale of the map display can be
changed by selecting the scale bar direct­ly. It is not available while driving.

The map scale is displayed under the
north−up symbol or heading−up symbol at
the top left of the screen.

or until the scale bar

INFORMATION

 Push the “Ɯ” button on the

Remote Touch to zoom in on the
map screen and “Ɲ” to zoom out.

 When the map scale is at the maxi-

mum range of 250 miles (400 km),

is not shown. When the map
scale is at the minimum range of
150 feet (50 m), is not shown.
In areas where the foot print map is
available the map scale changes
from to when at the
minimum range.

To display the foot print map, select

.

To delete the foot print map display, select

.

INFORMATION

 If the map or the current position is

moved to the area which is not cov­ered by the foot print map, the
screen scale automatically
changes to 150 feet (50 m).

 On the foot print map, a one way

street is displayed by .

 It is not possible to perform scroll-

ing on the foot print map while driv­ing.

48

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

— Orientation of the map

 To display building information

Information is available only for buildings
for which information is recorded on the
map disc.

U1038LC

Select “Info.” while the foot print map is
displayed.

U1039LC

Details of POIs in some buildings may be
displayed.

For detailed POI information, select the
building name. You can see details of the
selected POIs.

The orientation of the map can be changed
from North−up to Heading−up by selecting
the orientation symbol at the top left of the
screen.

Select

or .

U1040LC

 North−up screen

U1041LC

 Heading−up screen

North−up symbol

Regardless of the direction of vehicle trav­el, North is always up.

Heading−up symbol

The direction of vehicle travel is always up.
A red arrow indicates North.

49

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

— Standard map icons

Voice command system—

Icon

Name

Island

Park

Industry

Business facility

Airport

Military

University

Hospital

Stadium

Shopping mall

Golf

The voice command system enables you
to operate the navigation system, audio
system and hands−free system by giving
a command.

1. Push the talk switch.

After a beep sounds, the “Voice Menu”
screen is displayed.

INFORMATION

Voice guidance for the voice com­mand system can be skipped by
pushing the talk switch.

50

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

U1042LC

2. After a beep sounds, say the com­mand of your choice.

Voice commands are marked with

Some commonly used commands are dis­played on the screen. Speak the com­mands as displayed on the screen.

If you want to check the all command list,
say “Command list” to display the com­mand list screen. (See “—Command list”
on page 55.)

U1043LC

3. Following voice guidance, say the
command displayed on the screen.

If a desired outcome is not shown, or if no

.

choices are available, say “Go back” or
select “Go Back” to return to the previous
screen.

To cancel voice command recognition, say

“Cancel”, select “Cancel”, or push and

hold the talk switch.
If the navigation system does not respond

or the confirmation screen does not disap­pear, please push the talk switch and try
again.

If a voice command cannot be recognized
within 6 seconds, the voice guidance sys­tem will say “Pardon?” (“Command not
recognized.” will be displayed on the
screen) and voice command reception will
restart.

If a voice command cannot be recognized
two consecutive times, the voice guidance
system will say “Paused. To restart voice
recognition, push the talk switch.”, then be
suspended.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

51

NAVIGATION SYSTEM: BASIC FUNCTIONS

U1003AASLY

 Microphone
It is unnecessary to speak directly into

the microphone when giving a com­mand.

INFORMATION

 Wait for the confirmation beep be-

fore speaking a command.

 Voice commands may not be rec-

ognized if :

 Spoken too quickly
 Spoken at a low or high volume
 The windows or sunroof are

open

 Passengers are talking while

voice commands are spoken

 The air conditioning speed is set

high

 Turning the air−conditioning

vents towards the microphone.

 The command is not correct or

clear.

Note that certain words, accents,
or speech patterns may be diffi­cult for the system to recognize.

 There are some noises such as

wind noise, etc.

 Voice command example: Search-

ing for a route to your home.

1. Push the talk switch.

2. Say “Go home”.

If a home address is not registered, the
voice guidance system will say “Your
home is not set” and you will be prompted
to enter a home address. (See page 117.)

When the voice command is recognized,
a map of the area around your home is dis­played.

U1044LC

3. Select “Enter” or say “Enter”, and
the system starts searching for a route
to your home.

To return to the “Voice Menu” screen, say
“Go back” or select “Go Back”.

Select “Cancel” or say “Cancel”, and the

voice command system will be canceled.

52

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

— Natural speech

information (English only)

Due to natural language speech recogni­tion technology, this system enables rec­ognition of a command when spoken natu­rally. However, the system cannot
recognize every variation of each com­mand. In some situations, it is possible to
omit the command for the procedure and
directly state the desired operation.

 Voice recognition top screen ex-

pression examples

Command

Go Home Take me home.

Destination I’d like to set a des-

Phone I’d like to make a call.

Audio Audio menu, please.
Information Let me see the infor-

Command List Show me the voice

Expression examples

Let’s go home.

tination.

I need to use the
phone.
Bring up the phone
menu.

mation menu.
Give us the informa­tion menu, please.

command list.

 Expression examples for each func-

tion

In some situations, It is possible to omit a
command for each procedure and to say
the desired operation directly.

EXPRESSION EXAMPLES WITH THE
“Destination” SCREEN

Normal command recognition —

Destination>Point of Interest>Near
Here>Gas> The gas stations near the cur-

rent location will be listed.
Natural speech recognition —

Destination> What gas stations are
nearby?> The gas stations near the cur-

rent location will be listed.

INFORMATION

Natural speech example:
“Where’s the nearest Mexican restau-

rant?”
“Where is the closest ATM?”

53

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

EXPRESSION EXAMPLES WITH THE
“Phone Menu” SCREEN (when making
a call using a phonebook)

Normal command recognition —

Phone>Dial by Name>Bob>mobile> The

phone number will be displayed.
Natural speech recognition —

Phone>Call to Bob on his mobile.> The

phone number will be displayed.

INFORMATION

Natural speech example:
“Get me Rob Brown on the phone.”
“Please place a call to John on his

mobile.”

EXPRESSION EXAMPLES WITH THE
“Phone Menu” SCREEN (when making
a call by saying a phone number)

Normal command recognition —

Phone>Dial by Number>123−456−789>

The phone number will be displayed.
Natural speech recognition —

Phone>Call to 123−456−789.> The

phone number will be displayed.

INFORMATION

The above mentioned command for
making a call can also be recognized
on the voice recognition top screen.

Natural speech example:
“I’d like to place a call to

123−456−789.”
“I want to buzz 123−456−789, please.”

EXPRESSION EXAMPLES WITH THE
“Information Menu” SCREEN

Normal command recognition —

Information>XM Nav Weather>Los An­geles, California> The weather informa-

tion will be displayed.
Natural speech recognition —

Information>Give me a weather report
for Los Angeles, California.> The

weather information will be displayed.

INFORMATION

Natural speech example:
“How about Detroit, Michigan?”

EXPRESSION EXAMPLES WITH THE
“Audio Menu” SCREEN (when the au­dio source is in satellite radio mode)

Normal command recognition —

Audio>Select Channel Number>90> The

channel will be changed to the one se­lected.

Natural speech recognition —

Audio>Play channel ninety, please> The

channel will be changed to the one se­lected.

INFORMATION

Natural speech example:
“Switch the channel to XM one seven-

ty five.”

VOICE RECOGNITION TOP SCREEN
EXPRESSION EXAMPLES

Normal command recognition —

Command List>Dual Map> The map will

be displayed in dual map mode.
Natural speech recognition —
Switch to dual map mode.> The map will

be displayed in dual map mode.

54

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

— Command list

The system has a voice recognition com­mand list. You can operate the voice
recognition system by saying any com­mand from the displayed command list.

1. Push the talk switch.

U1046LC

2. Say “Command list”.

U1047LC

3. Say the command of your choice to
operate the system.

To confirm commands on the screen, se-

INFORMATION

When the “Voice Menu” screen is dis­played, all the commands in the voice
recognition command list can be rec­ognized.

lect

mand list. This function is available only
when the vehicle is not moving.

or to scroll through the com-

2010 HS250h Navigation from July.09 Prod.(OM75015U)

55

NAVIGATION SYSTEM: BASIC FUNCTIONS

 Voice command example: Changing

map screen

1. Push the talk switch.

2. Say “Command list”.

U1048LC

3. Say “Dual map”.

To confirm commands on the screen, se-

lect

mand list. This function is available only
when the vehicle is not moving.

When

switch again and say the command.

or to scroll through the com-

or is selected, push the talk

 Voice command example: Changing

map scale

1. Push the talk switch.

2. Say “Command list”.

U1050LC

3. Say “Zoom in” or “Zoom out”.

To confirm commands on the screen, se-

lect

mand list. This function is available only
when the vehicle is not moving.

When

switch again and say the command.

or to scroll through the com-

or is selected, push the talk

U1049LC

The screen shows the dual map.

56

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U1051LC

The scale of the map display is changed.

NAVIGATION SYSTEM: BASIC FUNCTIONS

COMMAND LIST

Change map mode

Command Action

Map Shows current potion map.

Dual map Changes map to dual mode.

Single map Changes map to single mode.

Compass mode Changes map to compass mode.

Change map scale

Command Action

Zoom in Zoom in.

Zoom out Zoom out.

Right map zoom in Zooms right map in.

Right map zoom out Zooms right map out.

Change map orientation

Command Action

North up Changes map bearing to north up.

Heading up Changes map bearing to heading up.

Map direction Changes map bearing to another direc-

tion.

Right map north up Changes right map bearing to north up.

Right map heading up Changes right map bearing to heading

up.

Right map direction Changes right map bearing to another

direction.

Change guidance mode

Command Action

Arrow mode Changes guidance screen to arrow

mode.

Turn list mode Changes guidance screen to turn list

mode.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

57

NAVIGATION SYSTEM: BASIC FUNCTIONS

Change guidance mode

Command Action

Freeway mode Changes guidance screen to freeway

mode.

Intersection mode Changes guidance screen to Intersec-

tion mode.

Set a destination

Command Action

Previous start point Calculates route to previous start point.

Save a point on the map

Command Action

Mark this point Marks the point on the map.

Change route

Command Action

Quick route Changes route to quick route.

Short route Changes route to short route.

Alternate route Changes route to alternate route.

Detour Calculates detour route.

Detour entire route Calculates detour entire route.

Review route

Command Action

Route overview Shows entire route.

Next destination map Shows position of next destination.

First destination map Shows position of first destination.

Second destination map Shows position of second destination.

Third destination map Shows position of third destination.

Fourth destination map Shows position of fourth destination.

Fifth destination map Shows position of fifth destination.

Final destination map Shows position of final destination.

58

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

Delete destination

Command Action

Delete next destination Deletes position of next destination.

Delete final destination Deletes position of final destination.

Delete all destinations Deletes position of all destination.

Guidance options

Command Action

Pause guidance Pauses the guidance.

Resume guidance Resumes the guidance.

Repeat guidance Repeat voice guidance.

Louder Turns volume up 1 level.

Softer Turns volume down 1 level.

Traffic information

Command Action

Traffic information Displays traffic information.

Show POI icons

Command Action

SHOW GAS Displays GAS STATION icons.

SHOW PARKING Displays PARKING icons.

SHOW SERVICE AND MAINTENANCE Displays SERVICE & MAINTENANCE

icons.

SHOW DEALERSHIPS Displays DEALERSHIP icons.

SHOW LEXUS Displays LEXUS DEALERSHIP icons.

SHOW TOYOTA Displays TOYOTA DEALERSHIP icons.

SHOW PARTS STORES Displays PARTS STORE icons.

SHOW ROADSIDE ASSISTANCE Displays ROADSIDE ASSISTANCE

icons.

SHOW AUTOMOBILE CLUBS Displays AUTOMOBILE CLUB icons.

SHOW CAR RENTAL AGENCIES Displays CAR RENTAL AGENCY icons.

SHOW CAR WASHES Displays CAR WASH icons.

SHOW OTHER AUTOMOTIVE Displays OTHER AUTOMOTIVE

STORE icons.

SHOW DINING Displays DINING icons.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

59

NAVIGATION SYSTEM: BASIC FUNCTIONS

Show POI icons

Command Action

SHOW AMERICAN DINING Displays AMERICAN RESTAURUNT

icons.

SHOW BAKERIES AND DELIS Displays BAKERY & DELI icons.

SHOW BARBECUE AND GRILL
DINING

SHOW CAJUN AND CARIBBEAN
DINING

SHOW CHINESE DINING Displays CHINESE RESTAURANT

SHOW COFFEE HOUSES Displays COFFEE HOUSE icons.

SHOW FAST FOOD Displays FAST FOOD icons.

SHOW FRENCH DINING Displays FRENCH RESTAURANT icons.

SHOW GREEK DINING Displays GREEK RESTAURANT icons.

SHOW INDIAN DINING Displays INDIAN RESTAURANT icons.

SHOW ICE CREAM AND CANDY Displays ICE CREAM & CANDY icons.

SHOW ITALIAN DINING Displays ITALIAN RESTAURANT icons.

SHOW JAPANESE DINING Displays JAPANESE RESTAURANT

SHOW KOREAN DINING Displays KOREAN RESTAURANT

SHOW LATIN AND SOUTH AMERICAN
DINING

SHOW MIDDLE EASTERN DINING Displays MIDDLE EASTERN

SHOW MEXICAN DINING Displays MEXICAN RESTAURANT

SHOW PIZZA Displays PIZZERIA icons.

SHOW SEAFOOD DINING Displays SEAFOOD RESTAURANT

SHOW SPANISH DINING Displays SPANISH RESTAURANT

SHOW STEAK HOUSES Displays STEAK HOUSE icons.

SHOW THAI DINING Displays THAI RESTAURANT icons.

Displays BARBECUE & GRILL
RESTAURANT icons.

Displays CARIBBEAN RESTAURANT
icons.

icons.

icons.

icons.

Displays LATIN & SOUTH AMERICAN
RESTAURANT icons.

RESTAURANT icons.

icons.

icons.

icons.

60

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

Show POI icons

Command Action

SHOW VIETNAMESE DINING Displays VIETNAMESE RESTAURANT

icons.

SHOW OTHER DINING Displays OTHER RESTAURANT icons.

SHOW GROCERIES Displays GROCERY STORE icons.

SHOW SHOPPING MALLS Displays SHOPPING MALL icons.

SHOW CONVENIENCE STORES Displays CONVENIENCE STORE icons.

SHOW HOME IMPROVEMENT Displays HOME IMPROVEMENT icons.

SHOW OFFICE AND ELECTRONICS Displays OFFICE & ELECTRONICS

icons.

SHOW RETAIL AND DEPARTMENT
STORES

SHOW DEPARTMENT STORES Displays DEPARTMENT STORE icons.

SHOW BOOK STORES Displays BOOK STORE icons.

SHOW CLOTHING AND SHOES
STORES

SHOW HOBBY AND CRAFTS Displays HOBBY & CRAFT icons.

SHOW JEWELRY Displays JEWELRY icons.

SHOW SPORTING EQUIPMENT Displays SPORTING EQUIPMENT

SHOW RECREATIONAL VEHICLES Displays RECREATIONAL VEHICLE

SHOW OTHER RETAIL STORES Displays OTHER RETAIL STORE icons.

SHOW POLICE STATIONS Displays POLICE STATION icons.

SHOW FIRE STATIONS Displays FIRE STATION icons.

SHOW HOSPITALS Displays HOSPITAL icons.

SHOW PHARMACIES Displays PHARMACY icons.

SHOW OTHER MEDICAL FACILITIES Displays OTHER MEDICAL FACILITY

SHOW HOTELS Displays HOTEL icons.

SHOW REST AREAS Displays REST AREA icons.

SHOW AIRPORTS Displays AIRPORT icons.

SHOW BUS STATIONS Displays BUS STATION icons.

Displays RETAIL & DEPARTMENT
STORE icons.

Displays CLOTHING & SHOES icons.

icons.

icons.

icons.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

61

NAVIGATION SYSTEM: BASIC FUNCTIONS

Show POI icons

Command Action

SHOW TRAIN STATIONS Displays TRAIN STATION icons.

SHOW PORTS AND FERRIES Displays PORTS & FERRY icons.

SHOW TAXIS AND SHUTTLES Displays TAXIS & SHUTTLE icons.

SHOW FULL SERVICE BANKS Displays FULL−SERVICE BANKS icons.

SHOW ATMS Displays ATM icons.

SHOW ATTRACTIONS Displays ATTRACTIONS icons.

SHOW ENTERTAINMENT Displays ENTERTAINMENT icons.

SHOW TOURIST INFORMATION Displays TOURIST INFORMATION

icons.

SHOW PARKS AND BEACHES Displays PARK & BEACH icons.

SHOW SPORTS AND FITNESS Displays SPORTS & FITNESS icons.

SHOW BOWLING CENTERS Displays BOWLING icons.

SHOW GOLF COURSES Displays GOLF COURSE icons.

SHOW HORSE RACING Displays HORSE RACING icons.

SHOW HEALTH AND FITNESS CLUBS Displays HEALTH & FITNESS CLUB

icons.

SHOW MARINAS Displays MARINA icons.

SHOW MOTOR SPORTS Displays MOTOR SPORTS icons.

SHOW SKI RESORTS Displays SKI RESORT icons.

SHOW SPORTS COMPLEXES Displays SPORTS COMPLEX icons.

SHOW NIGHTLIFE Displays NIGHTLIFE icons.

SHOW PERFORMING ARTS Displays PERFORMING ART icons.

SHOW CITY CENTERS Displays CITY CENTER icons.

SHOW GOVERNMENT Displays GOVERNMENT icons.

SHOW SCHOOLS Displays SCHOOL icons.

SHOW DRY CLEANERS Displays DRY CLEANING icons.

SHOW FLORISTS Displays FLORIST icons.

SHOW LIBRARIES Displays LIBRARY icons.

SHOW PERSONAL GROOMING Displays PERSONAL GROOMING

icons.

SHOW SHIPPING AND COPIES Displays SHIPPING & COPY icons.

62

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

Show POI icons

SHOW POST OFFICES Displays POST OFFICE icons.

SHOW OTHER SERVICES Displays OTHER SERVICE icons.

Delete POI icons

Command Action

Clear all icons Deletes all POI icons.

Select audio mode

Command Action

Radio Selects audio mode to radio.

AM Selects audio mode to AM.

FM Selects audio mode to FM.

FM1 Selects audio mode to FM1.

FM2 Selects audio mode to FM2.

Satellite radio Selects audio mode to satellite radio.

Satellite radio 1 Selects audio mode to satellite radio 1.

Satellite radio 2 Selects audio mode to satellite radio 2.

Satellite radio 3 Selects audio mode to satellite radio 3.

CD Selects audio mode to CD.

DVD Selects audio mode to DVD.

CD changer Selects audio mode to CD changer.

DVD changer Selects audio mode to DVD changer.

Auxiliary Selects audio mode to auxiliary.

Bluetooth audio

iPod

USB audio Selects audio mode to USB audio.

Command Action

Audio on / Audio off Turns audio system on and off.

Selects audio mode to Bluetooth audio.

Selects audio mode to iPod.

Audio On/Off

2010 HS250h Navigation from July.09 Prod.(OM75015U)

63

NAVIGATION SYSTEM: BASIC FUNCTIONS

Radio operation

Command Action

Seek up Seeks up for a radio station.

Seek down Seeks down for a radio station.

Type up Seeks up for program type.

Type down Seeks down for program type.

Disc operation

Command Action

Track up Tracks up for a track number.

Track down Tracks down for a track number.

Previous track Selects previous track.

Disc up Disc up.

Disc down Disc down.

Climate command

Command Action

Automatic climate control Turns air conditioner on and off.

Raise temperature Turns temperature up.

Lower temperature Turns temperature down.

?? degrees (?? is 65 to 85) Selects temperature from 65 to 80 de-

grees.

Phone

Command Action

Dial by number Calls by phone number.

Dial by name Calls by giving a voice tag in the

phonebook.

Select phone Selects phone.

64

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: BASIC FUNCTIONS

INFORMATION

 The function that cannot be used

according to the vehicle is pro­vided.

 Voice recognition language can be

changed. (See “ Selecting a lan­guage” on page 311.)

2010 HS250h Navigation from July.09 Prod.(OM75015U)

65

NAVIGATION SYSTEM: BASIC FUNCTIONS

66

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

SECTION 2

NAVIGATION SYSTEM:
DESTINATION SEARCH

Navigation system destination search

 Destination search 68

Selecting the search area 68. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Destination search by Home 70. . . . . . . . . . . . . . . . . . . . . . . . . . .

Destination search by Preset destinations 70. . . . . . . . . . . . . . .

Destination search by “Address” 71. . . . . . . . . . . . . . . . . . . . . . .

Destination search by “Point of Interest” 75. . . . . . . . . . . . . . . . .

Destination search by “Destination Assist” 82. . . . . . . . . . . . . . .

Destination search by “Previous Destinations” 82. . . . . . . . . . .

Destination search by “Address Book” 83. . . . . . . . . . . . . . . . . .

Destination search by “Emergency” 83. . . . . . . . . . . . . . . . . . . . .

Destination search by “Intersection & Freeway” 84. . . . . . . . . .

Destination search by “Map” 87. . . . . . . . . . . . . . . . . . . . . . . . . . .

Destination search by “Coordinates” 88. . . . . . . . . . . . . . . . . . . .

Deleting set destinations 88. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 Starting route guidance 89

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2010 HS250h Navigation from July.09 Prod.(OM75015U)

67

NAVIGATION SYSTEM: DESTINATION SEARCH

Destination search —

— Selecting the search area

Change the selected region in order to set
a destination from a different region by us­ing “Address”, “Point of Interest” or “Inter­section & Freeway”.

Push the “MENU” button and select
“Destination”.

1. Select “Search Area” to display a
map of the United States and Canada
divided into 12 regions. (For map data-

base information and updates, see “Map
database information and updates” on
page 390.)

U2002LC

You can use one of 11 different methods to
search your destination. (See pages 70
through 88.)

INFORMATION

When searching the destination, the
response to the screen button may be
slow.

68

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U2003LC

2. Select one of “US1” through “CAN”
to select a region to search.

3. Select “OK” and the previous
screen returns.

NAVIGATION SYSTEM: DESTINATION SEARCH

Button

“US1”

“US2”

“US3”

“US4”

“US5”

“US6”

“US7”

“US8”

U.S.A.

States included in the search
region

Idaho
Oregon
Washington

California
Nevada

Arizona
Colorado
Montana
New Mexico
Utah
Wyoming

Iowa
Kansas
Minnesota
Missouri
North Dakota
Nebraska
South Dakota

Oklahoma
Texas

Illinois
Indiana
Kentucky
Michigan
Ohio
Wisconsin

Arkansas
Alabama
Louisiana
Mississippi
Tennessee

Connecticut
Massachusetts
Maine
New Hampshire
New Jersey
New York
Rhode Island
Vermont

Washington, D.C.
Delaware
Maryland

“US9”

“US10”

“HI” Hawaii

Button

“CAN”

New Jersey
Pennsylvania
Virginia
West Virginia

Florida
Georgia
North Carolina
South Carolina

Provinces and regions in­cluded in the search region

All provinces and regions in
Canada included in this button.

Canada

2010 HS250h Navigation from July.09 Prod.(OM75015U)

69

NAVIGATION SYSTEM: DESTINATION SEARCH

— Destination search by

— Destination search by

Home

1. Push the “MENU” button and select
“Destination”.

U0002LS

2. Select “Go Home”.

The screen changes and displays the map
location for home and the route prefer­ence. (See “Starting route guidance” on
page 89.)

If home has not been registered, a mes­sage will be displayed and the setting
screen will automatically appear.

To use this function, it is necessary to set
a “Home” address. (To register “Home”,
see page 117.)

INFORMATION

Preset destinations

1. Push the “MENU” button and select
“Destination”.

2. Select any of the preset destination
buttons on the “Destination” screen.

The screen changes and displays the map
location of the preset destination point and
the route preference. (See “Starting route
guidance” on page 89.)

If a preset destination point has not been
registered, a message will be displayed
and the setting screen will automatically
appear.

To use this function, it is necessary to set
“Preset Destinations”. (To register “Preset
Destinations”, see page 119.)

Guidance starts from the current ve­hicle position to your home if “OK” is
selected even while driving.

70

2010 HS250h Navigation from July.09 Prod.(OM75015U)

INFORMATION

Guidance starts from the current ve­hicle position to the preset destina­tion point if “Go to ” is selected
even while driving.

NAVIGATION SYSTEM: DESTINATION SEARCH

— Destination search by

“Address”

There are 2 ways to search a destination
by address.
(a) Search by city
(b) Search by street address

1. Push the “MENU” button and select
“Destination”.

2. Select “Address” on the “Destina­tion” screen.

U2006LC

3. Select the button for the desired
method.

(a) Selecting a city to search

1. Push the “MENU” button and select
“Destination”.

2. Select “Address” on the “Destina­tion” screen.

U2007LC

3. Select “City”.

U2008LC

4. Input a city name.

U2009LC

5. Select the button of the desired city
name from the displayed list.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

71

NAVIGATION SYSTEM: DESTINATION SEARCH

U2010LC

6. Input the street name and select
“OK”.

U2011LC

7. When the desired street name is
found, select the corresponding but­ton.

The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

U2012LC

8. Input a house number.

U2013LC

If the same address exists in more than
one city, the current screen changes to the
address list screen.

72

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

SELECTING FROM THE LAST 5 CITIES

U2014LC

1. Select “Last 5 Cities”.

U2015LC

2. Select the button of the desired city
name.

If the navigation system has never been
used, this function will not be available.

The current screen changes to the screen
for inputting a street name. (See “(a) Se­lecting a city to search” on page 71.)

(b) Search by street address

1. Push the “MENU” button and select
“Destination”.

2. Select “Address” on the “Destina­tion” screen.

U2016LC

3. Select “Street Address”.

U2017LC

4. Select numbers directly on the
screen to input a house number.

After inputting a house number, select
“OK” to display the screen for inputting a
street name.

U2018LC

5. Input the street name and select
“OK”.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

73

NAVIGATION SYSTEM: DESTINATION SEARCH

U2019LC

6. When the desired street name is
found, select the corresponding but­ton.

The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

If the same address exists in more than
one city, the current screen changes input­ting the city name or to the address list
screen.

U2020LC

7. Input a city name.

U2021LC

8. Select the button of the desired city
name from the displayed list.

INFORMATION

You can search for a street name us­ing just the body.

Example : S WESTERN AVE
You can input “S WESTERN AVE”,

“WESTERN AVE” or “WESTERN”

74

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

— Destination search by

“Point of Interest”

There are 4 ways to search by Points of In­terest.
(a) Search by name
(b) Search by category
(c) Search by phone #
(d) Search by eDestination

1. Push the “MENU” button and select
“Destination”.

2. Select “Points of Interest” on the
“Destination” screen.

3. Select the button for the desired
method.

(a) Search by “Name”

1. Push the “MENU” button and select
“Destination”.

2. Select “Point of Interest” on the
“Destination” screen.

3. Select “Name” on the “Point of In­terest” screen.

U2023LC

4. Input the name of the Point of Inter­est.

U2024LC

5. Select the button of the desired des­tination.

The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

When inputting the name of a specific
Point of Interest, and there are two or more
sites with the same name, the list screen
is displayed.

INFORMATION

To search for a facility name using
multiple search words, put a space
between each word.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

75

NAVIGATION SYSTEM: DESTINATION SEARCH

 Selecting a city to search

U2025LC

Select the button of the desired des­tination.

If the same name exists in more than one
city, a search can be performed more easi­ly with “City” and “Category”. (See “
Selecting a city to search” on page 76 and
“ Selecting from the categories” on page

77.)

INFORMATION

The desired Point of Interest can be
displayed on the map screen. (See
“ — Display POI icons” on page 108.)

1. Select “City”.

2. Input the city name.

U2026LC

U2027LC

76

U2028LC

3. Select the button of the desired city
name from the displayed list.

INFORMATION

To cancel the city setting, select “Any
City”.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

 Selecting from the categories

U2029LC

Select “Category”.

U2030LC

If the desired POI category is on the
screen, select the name to display a de­tailed list of the POI category.

If the desired POI category is not on the
screen, select “List All Categories” to list
all POI categories.

U2031LCa

(b) Search by “Category”

The destination can be set by selecting the
search point and the POI category.

1. Push the “MENU” button and select
“Destination”.

2. Select “Point of Interest” on the
“Destination” screen.

3. Select “Category” on the “Point of
Interest” screen.

U2032LC

Set the search point by the following
method:

1. Set the search point from near the ve­hicle’s current position

2. Set the search point from along the
chosen route

3. Set the search point from near a city
center

4. Set the search point from near a des­tination

It is possible to display the names of POIs
located within approximately 200 miles
(320 km) from the selected search point.

When the desired category is selected, the
POI name list screen is displayed.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

77

NAVIGATION SYSTEM: DESTINATION SEARCH

SETTING THE SEARCH POINT FROM
NEAR HERE

Select “Near Here”.

The search point is set at the current posi­tion, and the “POI Category” screen will be
displayed. (See page 80.)

SETTING THE SEARCH POINT FROM
ALONG MY ROUTE

Select “Along My Route”.

The search point is set and the “POI Cate­gory” screen will be displayed. (See page

80.)

SETTING THE SEARCH POINT FROM
NEAR CITY CENTER

1. Select “Near City Center”.

U2033LC

2. Input the city center name.

U2034LC

3. Select the button of the desired city
center name.

The search point is set and the “POI Cate­gory” screen will be displayed. (See page

80.)

78

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

SELECTING FROM THE LAST 5 CITIES

1. Select “Near City Center”.

U2035LC

2. Select “Last 5 Cities”.

U2036LC

3. Select the button of the desired city
center name.

The search point is set and the “POI Cate­gory” screen will be displayed. (See page

80.)

SETTING THE SEARCH POINT FROM
NEAR A DESTINATION

1. Select “Near a Destination”.

U2037LC

2. Select the button of the desired des-

tination.

The search point is set and the “POI
Name” screen will be displayed. (See
page 80.)

2010 HS250h Navigation from July.09 Prod.(OM75015U)

79

NAVIGATION SYSTEM: DESTINATION SEARCH

 To search POIs near the search

point

When the search point is set, the “POI
Category” screen will be displayed.

U2073LC

Select the desired POI category.

If the desired POI category is not on the
screen, select “List All Categories” to list
all POI categories.

U2039LC

Select the desired POI category from
the list.

(c) Search by “Phone #”

1. Push the “MENU” button and select
“Destination”.

2. Select “Point of Interest” on the
“Destination” screen.

3. Select “Phone #” on the “Point of In­terest” screen.

U2042LC

4. Input a telephone number.

5. After inputting a telephone number,
select “OK”.

The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

If there is more than one site with the same
number, the following screen will be dis­played.

U2041LC

By selecting the button of the desired item,
the screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

80

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U2043LC

NAVIGATION SYSTEM: DESTINATION SEARCH

INFORMATION

 If there is no match for the tele-

phone number inputted, a list of
identical numbers with different
area codes will be displayed.

 To set an address book entry as a

destination using the phone num­ber, the number must already be
registered. (See page 127.)

(d) Search by “eDestination”

1. Push the “MENU” button and select

“Destination”.

2. Select “Point of Interest” on the

“Destination” screen.

3. Select “eDestination” on the “Point

of Interest” screen.

U2002LS

With the eDestination feature, you can go
online, via the Lexus.com owner’s Web
site, to select and organize destinations of
your choice and then wirelessly send them
to your vehicle’s navigation system. You
can store up to 200 locations online to ac­cess and update at any time. Your loca­tions can be organized into up to 20 fold­ers. (See “eDestination” on page 163.)

2010 HS250h Navigation from July.09 Prod.(OM75015U)

81

NAVIGATION SYSTEM: DESTINATION SEARCH

— Destination search by

— Destination search by

“Destination Assist”

1. Push the “MENU” button and select
“Destination”.

2. Select “Destination Assist” on the
“Destination” screen.

U2003LS

Destination Assist provides you with live
assistance for finding destinations via the
Lexus Enform response center. You can
request either a specific business,
address, or ask for help locating your
desired destination by category, such as
restaurants, gas stations, shopping
centers or other points of interest (POI).
After you tell the agent your choice of
destination, its coordinates are sent
wirelessly to your vehicle’s navigation
system. (See “Destination Assist” on page

161.)

“Previous Destinations”

1. Push the “MENU” button and select
“Destination”.

2. Select “Previous Destinations”
the “Destination” screen.

on

U2044LC

The previous starting point and up to 100
previously set destinations are displayed
on the screen.

3. Select the button of the desired des­tination.

“Delete”: To delete the previous destina-

tion. (To delete previous destinations, see
page 133.)

The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

82

INFORMATION

The list of previous destinations can
also be deleted by selecting “Delete
Previous Dest.” on the “Navigation
Settings” screen when the vehicle is
stopped. (See “ — Deleting previous
destinations” on page 133.)

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

— Destination search by

— Destination search by

“Address Book”

1. Push the “MENU” button and select
“Destination”.

2. Select “Address Book” on the “Des­tination” screen.

A list of registered address book entries is
displayed.

U2074LC

3. Select the button of the desired ad­dress book entry.

“Options”: To register or edit address

book. (See page 122.)
The screen changes and displays the map

location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

“Emergency”

1. Push the “MENU” button and select

“Destination”.

2. Select “Emergency” on the second

page of the “Destination” screen.

The display changes to a screen to select
police stations, dealers, hospitals or fire
stations. While driving, only nearby police
stations, dealers, hospitals, or fire stations
are shown. The current position is shown
with an address, and the latitude and the
longitude at the top of the screen.

U2046LC

3. Select the desired emergency cate-

gory.

The selected emergency category list is
displayed.

83

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

— Destination search by

“Intersection & Freeway”

There are 2 ways to search.
(a) Search by intersection
(b) Search by Freeway Entrance/Exit

1. Push the “MENU” button and select

U2047LC

4. Select the button of the desired des­tination.

The screen changes and displays the map
location of the selected destination and the
route preference. (See
guidance” on page 89.)

INFORMATION

“Starting route

“Destination”.

2. Select “Intersection & Freeway” on
the second page of the “Destination”
screen.

U2048LC

The navigation system does not
guide in areas where route guidance
is unavailable. (See page 389.)

3. Select the button for the desired
method.

84

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

(a) Search by “Intersection”

1. Push the “MENU” button and select
“Destination”.

2. Select “Intersection & Freeway” on
the second page of the “Destination”
screen.

3. Select “Intersection” on the “Inter­section & Freeway” screen.

U2049LC

4. Input the name of the first intersect­ing street which are located near the
destination to be set.

5. Select “OK”.

U2050LC

U2068LC

7. Input the name of the second inter-

secting street.

U2069LC

8. Select the button of the desired

item.

After inputting the two intersecting streets,
the screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)

6. Select the button of the desired
item.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

85

NAVIGATION SYSTEM: DESTINATION SEARCH

(b) Search by “Freeway Entrance/
Exit”

1. Push the “MENU” button and select
“Destination”.

2. Select “Intersection & Freeway” on

2U5106X

If the same two streets cross at more than
one intersection, the screen changes and
displays the menu to select the city name
where the streets intersect. Select the city,
and the map location of the selected des­tination and the route preference. (See
“Starting route guidance” on page 89.)

the second page of the “Destination”
screen.

3. Select “Freeway Entrance/Exit” on
the “Intersection & Freeway” screen.

4. To input a freeway name.

Be sure to use the complete name of the
freeway or highway, including the hyphen,
when entering the destination. Freeways
and interstates use an “I” (I−405). US high­ways use the state designation before the
number (CA−118).

U2051LC

86

U2052LC

5. Select the desired freeway by se­lecting the button.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U2053LC

— Destination search by

NAVIGATION SYSTEM: DESTINATION SEARCH

“Map”

1. Push the “MENU” button and select

“Destination”.

2. Select “Map” on the second page of

the “Destination” screen.

6. Either a freeway “Entrance” or
“Exit” can be selected.

U2054LC

7. To input a freeway entrance or exit
name.

8. Select “OK”.

U2055LC

9. Select the button of the desired en­trance or exit name.

The screen changes and displays the map
location of the selected destination and the
route preference. (See
guidance” on page 89.)

“Starting route

U2056LC

The screen changes and displays the map
location that was previously displayed just
before the destination input operation and
the route preference. (See “Starting route
guidance” on page 89.)

INFORMATION

Guidance starts if “OK” is selected
even while driving. However, the cur­sor cannot be moved.

87

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

— Destination search by
— Deleting set destinations

“Coordinates”

1. Push the “MENU” button and select
“Destination”.

2. Select “Coordinates” on the second
page of the “Destination” screen.

U2057LC

3. Input the latitude and the longitude.

4. When the input is finished, select
“OK”.

By selecting the button of the desired
point, the screen changes and displays the
map location of the selected destination
and the route preference. (See
route guidance” on page 89.)

“Starting

A set destination can be deleted.

1. Push the “MENU” button and select
“Destination”.

2. Select “Del. Dest.” on the “Destina­tion” screen.

When more than one destination is set, a
list will be displayed on the screen.

U2058LC

3. Select the destination for deletion.
“Select All”: To select all destinations on

the list.
“Unselect All”: To unselect all of the se-

lected destinations.

4. Select “Delete”.

88

U2059LC

A message appears to confirm the request
to delete.

5. To delete the destination(s), select
“Yes”.

If “Yes” is selected, the data cannot be re-
covered.

If “No” is selected, the previous screen
will return.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

Starting route guidance

The system searches for the guidance
route again, and displays the entire route.

INFORMATION

Set destinations can also be deleted
by selecting “Route”. (See “ — Delet­ing destinations” on page 101.)

After inputting the destination, the screen
changes and displays the map location of
the selected destination and the route pref­erence.

U2060LC

1. Scroll the map to the desired point.

“Adjust Location”: To adjust the position

in smaller increments.

U2061LC

When an arrow facing the desired point
is selected, the map scrolls in that di­rection.

The scroll stops when the selection of the
arrow is released.

2. Select “Go to

The system starts route search and dis­plays recommended routes.

If there is already a set destination, “Go to

” and “Add to Route” are displayed.

“Go to

tions and set a new one.

“Add to Route”: To add a destination.
“Info.”: If this button is displayed on the

top of the screen, select it to view items
such as name, address, and phone num­ber.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

”: To delete the existing destina-

”.

89

NAVIGATION SYSTEM: DESTINATION SEARCH

CAUTION

 Guidance can be paused or re-

U2062LC

 If “OK” is selected until a beep

1

Current position

2

Destination point

3

Type of the route and the distance

4

Distance of the entire route

3. To start guidance, select “OK”.
“Turn List”: The following screen displays

the list of the roads up to the destination.
“3 Routes”: To select the desired route

from 3 possible routes. (See page 91.)
“Edit Route”: To change the route. (See

page 92.)

 The route for returning may not be

 The route guidance to the destina-

 Route guidance may not be avail-

 When setting the destination on a

 If a destination is entered, the road

INFORMATION

sumed. (See “— Pausing and re­suming guidance” on page 107.)

sounds, demo mode will start.
Push the “MAP/VOICE” button to
finish Demo mode.

the same as that for going.

tion may not be the shortest route
nor a route without traffic conges­tion.

able if there is no road data for the
specified location.

map with a scale larger than 0.5
miles (800 m), the map scale
changes to 0.5 miles (800 m) auto­matically. Set the destination
again.

nearest to the point you selected is
set as the destination.

90

Be sure to obey traffic regulations
and keep road conditions in mind
while driving. If a traffic sign on the
road has been changed, the route
guidance may provide incorrect in­formation.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: DESTINATION SEARCH

3 ROUTES SELECTION

U2063LC

1. To select the desired route from 3
routes, select “3 Routes”.

U2064LC

U2065LC

1

Time necessary for the entire trip

2

Distance of the entire trip

3

Toll road

4

Freeway

5

Ferry

2. Select “Quick”, “Alt.” or “Short” to
select the desired route.

“Quick”: Recommended route.

This route is indicated by an orange line.
“Alt.”: Alternative route.

This route is indicated by a purple line.
“Short”: A route by which you can reach

the destination in the shortest distance.
This route is indicated by a green line.

“Info.”: To display the following informa­tion about each of the 3 routes.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

91

NAVIGATION SYSTEM: DESTINATION SEARCH

 Edit route

You can again designate the conditions of
the route to the destination.

U2066LC

Select “Edit Route”.

U2067LC

“Add”: To add destinations. (See page

100.)
“Delete”: To delete destinations. (See

page 101.)
“Reorder”: To reorder destinations. (See

page 100.)
“Preferences”: A number of choices are

provided on the conditions which the sys­tem uses to determine the route to the des­tination. (See page 105)

INFORMATION

 Even if the “Freeways” indicator is

dimmed, the route cannot avoid in­cluding a freeway in some cases.

 If the calculated route includes a

trip by ferry, the route guidance
shows a sea route. After you travel
by ferry, the current vehicle posi­tion may be incorrect. Upon recep­tion of GPS signals, it is automati­cally corrected.

92

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: ROUTE GUIDANCE

SECTION 3

NAVIGATION SYSTEM:
ROUTE GUIDANCE

Navigation system: Route guidance

 Route guidance screen 94

 Typical voice guidance prompts 97

 Distance and time to destination 99

 Setting and deleting destinations 100

Adding destinations 100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reordering destinations 100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Deleting destinations 101. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 Setting route 102

Detour setting 102. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Route overview 103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Route preference 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pausing and resuming guidance 107. . . . . . . . . . . . . . . . . . . . . .

 Show on map 108

Display POI* icons 108. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Route trace 112. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

∗

: Point of Interest

2010 HS250h Navigation from July.09 Prod.(OM75015U)

93

NAVIGATION SYSTEM: ROUTE GUIDANCE

Route guidance screen

During route guidance, various types of
guidance screens can be displayed de­pending on conditions.

 Screen layout

U3001LC

1

Distance to the next turn and the
arrow indicating turning direction

2

Current street name

3

Distance and travel/arrival time to
the destination

4

Current position

5

Guidance route

INFORMATION

 If the vehicle goes off the guidance

route, the route is searched again.

 For some areas, the roads have not

been completely digitized in our
database. For this reason, the
route guidance may select road
that should not be traveled on.

 When you arrive at your destina-

tion, the destination name will be
displayed on the top of the screen.
Selecting “Off” clears the dis­play.

 When the head−up display is on,

turn−by−turn guidance arrows will
be displayed on the windshield.

 During freeway driving

During freeway driving, the freeway exit in­formation screen will be displayed.

This screen displays the distance to the
next junction and exit, or POIs in the vicin­ity of the freeway exit.

U3002LC

1

Current position

2

Points of Interest that are close to
a freeway exit

3

Exit number and junction name

4

Distance from the current position
to the exit or junction

5

Current street name

“Map”: To display the selected map of the

exit vicinity.

: To scroll for farther junctions or exits.

: To scroll for closer junctions or exits.

: To scroll for the closest 3 junctions or

exits.

94

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: ROUTE GUIDANCE

 When approaching a freeway exit or

junction

When the vehicle approaches an exit or
junction, the guidance screen for the free­way will be displayed.

U3003LC

1

Next street name

2

Distance from the current position
to the exit or junction

3

Current position

“Off”: The guidance screen on freeway

disappears and the map screen appears.

When selecting
ing the “MAP/VOICE” button, the guid­ance screen on freeway reappears.

or push-

 When approaching an intersection

When the vehicle approaches an intersec­tion, the intersection guidance screen will
be displayed.

U3004LC

1

Next street name

2

Distance to the intersection

3

Current position

“Off”: The intersection guidance screen

disappears and the map screen appears.

When selecting
ing the “MAP/VOICE” button, the inter­section guidance screen reappears.

or push-

2010 HS250h Navigation from July.09 Prod.(OM75015U)

95

NAVIGATION SYSTEM: ROUTE GUIDANCE

 Other screens

TURN LIST SCREEN

On this screen, the list of turns on the guid­ance route can be viewed.

Selecting
ance displays the turn list.

during guid-

U3005LC

1

Next street name or destination
name

2

Turn direction

3

Distance between turns

4

Current street name

ARROW SCREEN

On this screen, information about next
turns on the guidance route can be viewed.

Selecting
ance displays the arrow screen.

during guid-

U3006LC

1

Exit number, street name contain­ing number or next street name

2

Turn direction

3

Distance to the next turn

4

Current street name

96

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: ROUTE GUIDANCE

Typical voice guidance

prompts

The voice guidance provides various mes­sages as you approach an intersection, or
other point where you need to maneuver
the vehicle.

4.7
miles

0.5 miles

3U5119X

4.2 miles

0.5 miles

3U5120X

1

2

3

4

“Proceed about 5 miles to Main
street.”

“In half of a mile, right turn onto
Main street.”

“Right turn.”

(Beep sound only)

INFORMATION

 The street names may not be pro-

nounced correctly or clearly due to
text−to−speech function.

 On freeways, interstates or other

highways with higher speed limits,
the voice guidance will be made at
earlier points than on city streets in
order to allow time to maneuver.

1

2

3

4

5

“Proceed about 4 miles to the
traffic circle.”

“In half of a mile, traffic circle
ahead, and then 3rd exit ahead
onto Main street.”

“The 3rd exit ahead.”

“The exit ahead.”

(Beep sound only)

97

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: ROUTE GUIDANCE

One−way road

3U5121X

One−way road

∗

: The system indicates a U−turn if the dis­tance between two one−way roads (of op­posite directions) is less than 50 feet (15
m) in residential areas or 164 feet (50 m)
in non−residential areas.

1

2

3

“In half of a mile, make a legal
U−turn.”

“Make a legal U−turn ahead.”

(Beep sound only)

3U5122X

The system announces the approach to
the final destination.

1

2

 If the system cannot determine the

 If you did not hear the voice guid-

 To adjust the voice guidance vol-

“Your destination is ahead.”

“You have arrived at your des­tination. The route guidance is
now finished.”

INFORMATION

current vehicle position correctly
(in cases of poor GPS signal recep­tion), the voice guidance may be
made early or delayed.

ance command, push the “MAP/
VOICE” button to hear it again.

ume, see “
page 319.

 Voice volume” on

98

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: ROUTE GUIDANCE

Distance and time to

destination

U3007LC

When the vehicle is on the guidance route,
the distance and the estimated travel/arriv­al time to the destination are displayed.
When the vehicle is not on the guidance
route, the distance and the direction of the
destination are displayed.

When driving on the guidance route and
more than one destination is set, the dis­tance and the estimated travel/arrival time
from the current position to each destina­tion are displayed.

1. Select this button to display the fol­lowing screen.

The distance, the estimated travel time
and the estimated arrival time from the cur­rent position to the selected destination
are displayed.

Estimated travel time is dis­played.

Estimated arrival time is dis­played.

To switch to estimated arrival
time.

To switch to estimated travel
time.

Displayed while driving off the
guidance route. The destina­tion direction is indicated by
an arrow.

U3065LC

2. Select the number button to display
the desired destination.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

INFORMATION

When the vehicle is on the guidance
route, the distance measured along
the route is displayed. Travel time
and arrival time is calculated based
on the set vehicle speed information.
(See page 323.) However, when the
vehicle is not on the guidance route,
the distance is the linear distance be­tween the current position and the
destination.

99

NAVIGATION SYSTEM: ROUTE GUIDANCE

Setting and deleting
— Reordering destinations

destinations —
— Adding destinations

You can add destinations and search
again for the routes.

U3011LC

1. Select “Route”.

U3009LC

2. Select “Add”.

3. Input an additional destination in
the same way as the destination
search. (See “Destination search” on

page 68.)

When more than one destination is set,
you can change the arrival order of the
destinations.

U3011LC

1. Select “Route”.

U3012LC

2. Select “Reorder”.

U3010LC

4. Select the desired “Add Destination
Here” to determine the arrival order of
the additional destination.

100

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U3013LC

3. Select the desired destination and
select “Move Up” or “Move Down” to
change the arrival order.

4. Select “OK”.

5. After selecting the destinations, se­lect “OK”.

The system searches for the guidance
route again, and displays the entire route.

NAVIGATION SYSTEM: ROUTE GUIDANCE

— Deleting destinations

A set destination can be deleted.

U3011LC

1. Select “Route”.

U3015LC

2. Select “Delete”.

When more than one destination is set, a
list will be displayed on the screen.

4. To delete the destination(s), select
“Yes”.

If “Yes” is selected, the data cannot be re-
covered.

If “No” is selected, the previous screen
will return.

The system searches for the guidance
route again, and displays the entire route.

U3016LC

3. Select the destination for deletion.
“Select All”: To select all destinations on

the list.
“Unselect All”: To unselect all of the se-

lected destinations.
A message appears to confirm the request

to delete.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

101

NAVIGATION SYSTEM: ROUTE GUIDANCE

Setting route —

— Detour setting

While the route guidance is operating, you
can change the route to detour around a
section of the route where a delay is
caused by road repairs, or an accident,
etc.

U3019LC

U3011LC

1. Select “Route”.

U3018LC

2. Select “Detour”.

3. Select the button below to select the
desired detour distance.

“1 mile (km)”, “3 miles (km)” or “5 miles
(km)”: Select one of these buttons to start

the detour process. After detouring, the
system returns to the original guidance
route.

“Whole Route”: By selecting this button,
the system will calculate an entire new
route to the destination.

“Around T raffic”: If you select this button,
the system will search for the route based
on the traffic congestion information re­ceived from XM NavTraffic. For details,
see “XM NavTraffic” on page 175.

102

2010 HS250h Navigation from July.09 Prod.(OM75015U)

NAVIGATION SYSTEM: ROUTE GUIDANCE

— Route overview

3U5123X

This picture shows an example of how the
system would guide around a delay
caused by a traffic jam.

1

This position indicates the location of
a traffic jam caused by road repairs or
an accident.

2

This route indicates the detour sug­gested by the system.

INFORMATION

U3011LC

1. Select “Route”.

U3021LC

2. Select “Overview”.

 When your vehicle is on a freeway,

the detour distance selections are
5, 15, and 25 miles (km).

 The system may not be able to cal-

culate a detour route depending on
the selected distance and sur­rounding road conditions.

2010 HS250h Navigation from July.09 Prod.(OM75015U)

U3022LC

The entire route from the current position
to the destination is displayed.

“OK”: To start guidance.
“Turn List”: The following screen displays

the list of the roads up to the destination.
“Preview”: To preview the route.

103