Lexmark Z65, Z65N User Manual

Lexmark Z65 Inf ormation Update

Cartridge packaging

Foam has been added to the packaging to give the cartridges extra protection during shipping.

Note: Remove the foam, sticker, and tape before installing your cartridges.

Printing from paper tray 1

This section replaces the information regarding the paper dimensions for printing from paper tray 1 in
the User’s Guide.

From paper tray 1, you can print on any supported paper type, such as plain, coated, photo, or glossy
paper, transparencies, envelopes, labels, iron-on transfers, or banner paper. Your paper must be within
these dimensions:

Width: 76.2 to 215.9 mm (3.0 to 8.5 in.)
Length: 127 to 432 mm (5.0 to 17.0 in.) for Windows

127 to 355.6 mm (5.0 to 14.0 in.) for Macintosh

Note: Banner paper may be longer than the dimensions listed above.

Paper exit tray capacity

The paper exit tray can hold up to 150 sheets of plain paper when the printer and the paper exit tray
are both placed on one level surface.

1

Installing additional listed printers for Windows

These steps replace the steps for installing additional listed printers for Windows in the Lexmark Z65n
Color Jetprinter User’s Guide.

After installing the first printer on your network computer, complete the following process for each
additional listed printer you want to install.

1 Insert the printer software CD into the CD-ROM drive of the same network computer.
2 Click Install.

3 Select Install another copy of the driver software, and then click Next.

2