Lexmark S300 Series Installation Manual

Lexmark S300 Series Installation

1

2

Unpack printer

Notes:

• Place the printer near the computer

during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.

• Do not attach the USB cable until

prompted to do so.

• The packaged printhead is shipped

inside the printer.

• Contents may vary by model and

region.

Remove tape and packing material from all areas of the
printer

Lexmark S300 Series Installation

3

4

Raise paper support

Raise printer control panel

Lexmark S300 Series Installation

5

6

Open printer and remove packaged printhead from
printer

If necessary, insert correct (1) language overlay and install
(2) protective cover