Lexmark OPTRA C710 User Manual

Quick Reference

Lexmark Optra C710

Overview of Printer Menus

Color Laser Printer

Operator Panel

Ready

1 Menu 2

Go 5

Select 3

Return 4

Stop 6

SUPPLIES MENU

<color> Toner Tray 1 Status

Tray 2 Status Tray 3 Status

Coating Roll Transfer Belt

Menus or menu items in italics are displayed only when the required option is installed. Capitalized menu items (for example, PAPER SIZE) have submenus.

COLOR MENU

Color Correction Print Resolution Image Enhancement

PAPER MENU

Paper Source PAPER SIZE PAPER TYPE PAPER WEIGHT CUSTOM TYPES Substitute Size Configure MP

Paper Loading

FINISHING MENU

Duplex Duplex Bind

Copies Blank Pages Collation Separator Sheets Separator Source Multipage Print Multipage Order Multipage View Multipage Border

UTILITIES MENU

Print Menus Print Net1 Setup Print Net2 Setup Print Net3 Setup Print Fonts Print Directory Factory Defaults Format Flash

Defragment Flash Format Disk Job Acct Stat

Hex Trace CHANGE TONER

Press <Menu> to:

•Enter the menus from the ready state

•Scroll through menus or values

•Increase or decrease a numerical value

•Display the Job Menu or the Supplies Menu while the printer is busy

Press Select to:

•Select the item on the second line of the display

•Save the selection as a new default setting

Press Return to:

•Back up to the previous menu level

Press Stop to:

•Temporarily stop all print activity without losing data

Press Go to:

•Exit printer menus and return to the ready state

•Clear messages

JOB MENU

Cancel Job Reset Printer Print Buffer CONFIDENTIAL JOB HELD JOBS

NETWORK MENU

NETWORK OPTION1 NETWORK OPTION 2 NETWORK OPTION 3

PCL SmartSwitch PS SmartSwitch NPA Mode Network Buffer Job Buffering NETWORK x SETUP

SETUP MENU

Printer Language Power Saver Resource Save Download Target Print Timeout Wait Timeout Auto Continue Jam Recovery Page Protect Print Area Display Language Alarm Control Toner Alarm

Job Buffer Size Job Accounting Job Acct Limit

INFRARED MENU

Infrared Port PCL SmartSwitch PS SmartSwitch NPA Mode Infrared Buffer Job Buffering Window Size Transmit Delay Max Baud Rate

PCL EMUL MENU

Font Source Font Name Point Size Pitch Symbol Set Orientation Lines per Page A4 Width Auto CR after LF Auto LF after CR TRAY RENUMBER

LOCALTALK MENU

LocalTalk Port PCL SmartSwitch PS SmartSwitch NPA Mode LocalTalk Buffer Job Buffering NPA Hosts LocalTalk Name LocalTalk Addr LocalTalk Zone

POSTSCRIPT MENU

Print PS Error Font Priority Image Smoothing

USB MENU

USB OPTION 1 USB OPTION 2 USB OPTION 3

PCL

SmartSwitch

PS SmartSwitch

NPA Mode

USB Buffer Job Buffering

PARALLEL MENU

STD PARALLEL

PARALLEL OPT 1 PARALLEL OPT 2 PARALLEL OPT 3

PCL SmartSwitch PS SmartSwitch NPA Mode Parallel Buffer

Job Buffering

Advanced Status Protocol Honor Init Parallel Mode 1 Parallel Mode 2

FAX MENU

Fax Port Fax Baud Fax Data Bits Fax Parity Fax Buffer Job Buffering Fax Paper Size Fax Paper Type FAX SETUP FAX LOGS FAX SEND FAX RECEIVE

SERIAL MENU

STANDARD SERIAL SERIAL OPTION 1 SERIAL OPTION 2 SERIAL OPTION 3

PCL SmartSwitch PS SmartSwitch NPA Mode Serial Buffer Job Buffering RS-232/RS-422 RS-422 Polarity Serial Protocol Robust XON Baud Data Bits Parity Honor DSR

Loading Paper and Transparencies

Message Location

230 Paper Jam Top duplex assembly 231 Paper Jam Rear duplex assembly 232 Paper Jam Duplex unit base and tray

230 Paper Jam - Top Duplex Assembly

1 Open the top duplex assembly door.

2 Carefully remove jammed paper.

3 Close the top duplex assembly door.

231 Paper Jam - Rear Duplex Assembly

1 Open the rear cover.

2 Carefully remove any jammed paper.

3 Close the rear cover.

232 Paper Jam - Duplex Unit Base and

Tray

1 Completely remove duplex unit inverter tray.

2 Carefully remove jammed paper (check inside

duplex unit base).

3 Insert duplex unit inverter tray into duplex unit.

Printed in U.S.A.

This document is printed on recycled paper. 9/99

E.C. 1C0105 P/N 10E0243

Clearing Printer Paper Jams

Clearing Duplex Unit Paper Jams

Important! Move the rear and side guides to properly position the guides for the media size.

Note: Labels and card stock can only be used in the multipurpose feeder. Transparencies can only be fed from the multipurpose feeder or tray 1.

Important! Recommended Lexmark transparencies are P/N 12A5150 (letter) or P/N 12A5151 (A4).

Adjust Guides

Flex Paper

Printer Paper Path

Top output bin

Message Location

202 Paper Jam Fuser and output rollers 201 Paper Jam Transfer belt and fuser 250 Paper Jam

24x Paper Jam Paper tray

Multipurpose feede

202 Paper Jam - Fuser and Output Rollers

1 Open the fuser cover, fuser door, and front cover.

2 Remove coating roll.

3 Carefully remove jammed paper.

4 Close the front cover, fuser door, and fuser cover.

Note: Paper jammed in the fuser rollers must be removed from the underside of the fuser.

Duplex Unit Paper Path

Load Paper Tray

Multipurpose Feeder

Paper face up top edge entering printer

Paper or transparencies

Rear guide

Maximum stack height

201 Paper Jam - Transfer Belt and Fuser

1 Open the front cover.

2 Carefully remove any jammed paper.

3 Close the front cover.

250 Paper Jam - Multipurpose Feeder

1 Open the front cover.

2 Carefully remove any jammed paper.

3Close the front cover.

24x Paper Jam - Check Paper Tray x

1 Remove the paper tray.

Paper face down top edge entering printer

Envelope face down with flap to the right

2 Carefully remove any jammed paper.

3 Place the tray inside the printer.

Note: You may have to remove the drawer above the paper jam or clear the jam from inside the front cover.