Lexmark C770N, C920N, C534N, C524N, C524DN User Manual
...
www.lexmark.comJanuary 2007
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
© 2007 Lexmark International, Inc.
740 West New Circle Road
Lexington, Kentucky 40550
Technical Reference
Edition: January 2007
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK
INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not
apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these
changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road,
Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services
Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in
any way it believes appropriate without incurring any obligation to you. To obtain additional copies of publications related to this product, visit
the Lexmark Web site at www.lexmark.com.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all
countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product,
program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual
property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except
those expressly designated by the manufacturer, are the user’s responsibility.
Lexmark, Lexmark with diamond design, MarkNet, MarkVision, and Optra are trademarks of Lexmark International, Inc., registered in the
United States and/or other countries. ColorGrade, PerfectFinish, and PictureGrade are trademarks of Lexmark International, Inc.
The following terms are trademarks or registered trademarks of other companies:
PCL® is a registered trademark of the Hewlett-Packard Company. PCL 5 and PCL 6 are Hewlett-Packard Company’s designations of a set
of printer commands (language) and functions included in its printer products. These printers are intended to be compatible with the PCL 5
and PCL 6 languages. This means these printers recognize PCL 5 and PCL 6 commands used in various application programs, and that
the printer emulates the functions corresponding to the commands.
Other trademarks are the property of their respective owners.
Albertus The Monotype Corporation plc
Antique Olive Monsieur Marcel OLIVE
Apple-Chancery Apple Computer, Inc.
Arial The Monotype Corporation plc
Candid Agfa Corporation
CG Omega Product of Agfa Corporation
CG Times Based on Times New Roman under
license
from The Monotype Corporation plc, is a
product of Agfa Corporation
Chicago Apple Computer, Inc.
Clarendon Linotype-Hell AG and/or its subsidiaries
Eurostile Nebiolo
Geneva Apple Computer, Inc.
GillSans The Monotype Corporation plc
Helvetica Linotype-Hell AG and/or its subsidiaries
Hoefler Jonathan Hoefler Type Foundry
ITC Avant Garde Gothic International Typeface Corporation
ITC Bookman International Typeface Corporation
ITC Lubalin Graph International Typeface Corporation
ITC Mona Lisa International Typeface Corporation
ITC Zapf Chancery International Typeface Corporation
Joanna The Monotype Corporation plc
Marigold Arthur Baker
Monaco Apple Computer, Inc.
New York Apple Computer, Inc.
Oxford Arthur Baker
Palatino Linotype-Hell AG and/or its subsidiaries
Stempel Garamond Linotype-Hell AG and/or its subsidiaries
Taffy Agfa Corporation
Times New Roman The Monotype Corporation plc
TrueType Apple Computer, Inc.
Univers Linotype-Hell AG and/or its subsidiaries
Wingdings Microsoft Corporation
©
1998, 2007 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement are commercial computer software and documentation
developed exclusively at private expense.
Contents
TOC-1
Contents
Introduction ......................................................................1-1
Overview.............................................................................................................1-1
Navigational Tips................................................................................................1-4
Printing the File...................................................................................................1-4
Bibliography........................................................................................................1-5
PCL Emulation..................................................................2-1
Selecting PCL Emulation....................................................................................2-1
Using SmartSwitch........................................................................................2-1
Using the Operator Panel or MarkVision Professional..................................2-1
Using Your Software Program ......................................................................2-2
Page Formatting.................................................................................................2-3
Printable Areas..............................................................................................2-3
Lexmark™ C520, C522n, C524, C524n, C524dn, C530dn, C532n,
C532dn, C534n, C534dn, C534dtn, C770, C770n, C772, C772n, C920,
C920n, C920dn, and C920dnf ......................................................................2-4
Print Area Menu Item..........................................................................................2-6
Font and Symbol Set Support for the Lexmark C520, C522n, C524,
C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnf..........................2-8
Forward and Backward Compatibility Modes for the Lexmark C520,
C522n, C524, C524n, C524dn, C530dn, C532n, C534n, C534dn,
C534dn, C534dtn, C770, C770n, C772, C772n, C920, C920n,
C920dn, C920dnf..........................................................................................2-9
Selecting Symbol Sets for Lexmark C520, C522n, C524m C542b
C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnt ..................2-14
Command Structure .........................................................................................2-48
Control Codes .............................................................................................2-49
Commands..................................................................................................2-49
PCL Emulation Commands ..............................................................................2-51
PCL Emulation Commands by Function.....................................................2-52
GL/2 Commands ..............................................................................................2-74
Contents
TOC-2
Raster Image Graphics.....................................................................................2-78
Raster Compression Mode .........................................................................2-78
Macros..............................................................................................................2-85
Printer Job Language ......................................................3-1
PJL Command Notation .....................................................................................3-1
Kernel Commands..............................................................................................3-2
Job Separation Commands................................................................................3-4
Environment Commands and Variables .............................................................3-7
Common Variables for PCL Emulation .......................................................3-48
Status Readback Commands...........................................................................3-54
Status Message Format ...................................................................................3-61
Information Messages.................................................................................3-61
Auto-Continuable Conditions ......................................................................3-63
Attendance Conditions................................................................................3-67
Operator Intervention - Paper Handling ......................................................3-72
Operator Intervention - Paper Jams............................................................3-75
Service Errors .............................................................................................3-80
Device Attendance Commands........................................................................3-80
Unique PJL Commands....................................................................................3-82
File Commands for Flash or Disk................................................................3-86
File and Device Protection Commands ............................................................3-93
Protecting a File or Device..........................................................................3-93
Unlocking a Protected File or Device..........................................................3-95
Re-Locking a Protected File or Device........................................................3-96
Unlocking a Protected File or Device for the Current Job...........................3-97
Recovering Lost Passwords........................................................................3-98
PostScript Emulation .......................................................4-1
Selecting PostScript Emulation ..........................................................................4-1
Using SmartSwitch........................................................................................4-1
Using the Operator Panel or MarkVision Professional..................................4-1
Using Your Software Program ......................................................................4-2
Paper Tray Support.......................................................................................4-5
Envelope Size Support................................................................................4-10
Envelope Tray Support ...............................................................................4-12
Contents
TOC-3
Supplemental Operator Summary...............................................................4-14
Page Device Parameters..................................................................................4-49
Interpreter Parameters .....................................................................................4-63
User Parameters.........................................................................................4-63
System Parameters.....................................................................................4-66
Device Parameters......................................................................................4-72
Status and Error Messages..............................................................................4-93
Tagged Binary Not Active ...........................................................................4-93
Tagged Binary Active..................................................................................4-93
Status Messages.........................................................................................4-94
Switching Languages ......................................................5-1
SmartSwitch .......................................................................................................5-1
Setting SmartSwitch for Different Interfaces .................................................5-2
Printer Job Language .........................................................................................5-2
Sniffing................................................................................................................5-3
Flash Memory and Disk ...................................................6-1
Resource Data Collection (Download Target)....................................................6-2
Storing Resources on Flash Memory or Disk................................................6-3
Viewing the Contents of Flash Memory and Disk...............................................6-3
Password Protection...........................................................................................6-7
Rewriting the Flash Content ...............................................................................6-8
Accessing Files with PostScript Emulation.........................................................6-9
File Naming Conventions..............................................................................6-9
Device Search Order...................................................................................6-12
Performance.....................................................................................................6-13
Job Buffering ....................................................................................................6-13
Creating a Partition .....................................................................................6-14
Enabling Job Buffering................................................................................6-14
Disabling Job Buffering ...............................................................................6-15
Recovering from a Power Loss...................................................................6-15
Contents
TOC-4
Printer Specifications ......................................................7-1
Airflow Requirement......................................................................................7-1
Noise Emission Levels..................................................................................7-1
Electrical Specifications ................................................................................7-2
Power Requirements.....................................................................................7-3
.Physical Specifications.................................................................................7-5
Clearance Requirements .............................................................................7-8
Environmental Conditions .............................................................................7-9
Altitude Specifications...................................................................................7-9
Atmospheric Pressure...................................................................................7-9
Printer Interfaces..............................................................8-1
Setting Up the Communications Port .................................................................8-2
Setting Up the Communications Port Using Windows 95/98/Me ..................8-2
Setting Up the Communications Port Using Windows NT 4.0 ......................8-3
Setting Up the Communications Port Using Windows 2000 .........................8-4
Setting Up the Communications Port Using Windows XP ............................8-5
Deciding Which Interface to Use ........................................................................8-6
Parallel Interface.................................................................................................8-7
Standard Parallel Connector.........................................................................8-8
Using the INIT* Signal to Initialize.................................................................8-8
Computer-to-Printer Communications...........................................................8-8
Printer-to-Computer Communication (Advanced Status)............................8-13
Parallel Mode 1 ...........................................................................................8-14
Parallel Mode 2 ...........................................................................................8-15
Signal Descriptions .....................................................................................8-15
Using the RS-232C Serial Interface............................................................8-18
Network Support...............................................................................................8-28
Input Buffer.......................................................................................................8-29
Contents
TOC-5
PCL Support .................................................................... A-1
PJL Support..................................................................... B-1
PostScript Support ......................................................... C-1
Index................................................................................. X-1
Introduction
1-1
CHAPTER 1: Introduction
Overview
The following edition of the Technical Reference contains information about printer
commands and printer languages supported by the following Lexmark printers:
• Lexmark™ C520, C522n, C524, C524n, C524dn, C770, C770n, C772, C772n,
C920, C920n, C920dn, and C920dnf.
To determine which commands and languages your printer supports, see the
appendixes in the back of this document or see your printer documentation.
If your printer is not included in this edition of the Technical Reference, it may be
available in another version. Visit the Lexmark Web site at www.lexmark.com/
publications for more information.
The Technical Reference is divided into the following:
Acronym Meaning
nnetwork
dduplex
dn duplex and network
dnf duplex network finisher
Table 1-1: Technical Reference Documentation Available in Hard Copy
If you need a Technical Reference for the... Order Lexmark part number...
Optra™ K 11A4079
Optra N 11A9979
Optra SC 11C0905
Optra E310 12A2194
Introduction
1-2
Chapter 2: “PCL Emulation”
Shows how to select PCL emulation and discusses PCL emulation commands, GL/2
commands, and resident font and symbol set support.
Chapter 3: “Printer Job Language”
Contains detailed information about certain commands that cause the printer to enter
PCL emulation, PostScript emulation, and Personal Printer Data Stream (PPDS), and
many other types of commands.
Chapter 4: “PostScript Emulation”
Provides information about PostScript emulation and explains PostScript emulation
supplemental operators.
Chapter 5: “Switching Languages”
Describes ways to switch printer languages and explains when you may want to
choose one method over another.
Chapter 6: “Flash Memory and Disk”
Provides information about using the flash memory and hard disk. It describes how to
manage printer memory, store resources (such as fonts and macros), and manage
files.
Chapter 7: “Printer Specifications”
Lists printer specifications, including information about hardware and environmental
conditions.
Chapter 8: “Printer Interfaces”
Provides information on printer interfaces, including information about parallel and
serial interface, network support, and communication protocols.
See the tables in the three appendixes to determine if your printer supports a
particular PCL emulation, PJL, or PostScript emulation command. The appendixes
are:
Introduction
1-3
Appendix A: “PCL Support”
Appendix B: “PJL Support”
Appendix C: “PostScript Support”
Introduction
1-4
Navigational Tips
If you are not familiar with PDF files, the following tips may help you find the
information you need.
• To move forward and backward through this document:
– Select an option under View in the menu bar at the top of the page.
– Use the arrows in the toolbar at the top of the page, or the up arrow and
down arrow keys on the keyboard.
– Press the Page Up and Page Down keys on the keyboard.
– Use the scroll bar to the right of the page.
– Click the page number box on the status bar at the bottom of the page and
type the page you want.
• To increase or decrease the magnification of the pages:
– Select the magnifying glass icon on the toolbar at the top of the page and
then draw a box around the area you want to view.
– Click the magnification box on the status bar and select an option from the
drop-down menu.
• To jump directly to a particular section or key word in this document:
– Click one of the bookmarks in the overview window to the left of the page.
– Click a topic in the table of contents.
– Select Tools from the menu bar and then choose Find or Search.
– Click the binoculars icon on the toolbar and then type a word in the text box.
– Click a cross-reference to a figure, page number, or heading in the docu-
ment itself.
Printing the File
Although this book was designed primarily for online viewing, you can print a hard
copy by clicking File on the toolbar, and then choosing Print. Make sure you’ve
selected the correct printer, range of pages, and number of copies before you click OK.
You should be aware that if you print this document on a color printer, the color you
see on the paper may not match the color you see on your computer monitor.
Introduction
1-5
Bibliography
For detailed information about PCL emulation printer commands, PostScript
emulation printer commands and operators, and interfaces, see the following
documentation:
• Hewlett-Packard DeskJet Printer Family Technical Reference, C2121-90101
• Hewlett-Packard LaserJet 4 Typography and Graphics, Random House
Electronic Publishing
• Hewlett-Packard PCL 5 Color Technical Reference Manual, 5961-0635
• Hewlett-Packard PCL 5 Printer Language Technical Reference Manual,
5961-0509
• Hewlett-Packard PostScript SIMM Technical Reference, I/O Device Operators
and Parameters, C2080-90921
• Hewlett-Packard Printer Job Language Technical Reference Manual,
5961H0512
• IBM Personal System/2 Hardware Interface Technical Reference, S68X-2330
• Interface between Data Terminal Equipment and Data Communications
Equipment Employing Serial Binary Data Interchange, Electronic Industries
Association, publications EIA RS-232C and EIA\TIA-232-E
• Network Printing Alliance Protocol, A Printer/Host Control Specification
Developed by the NPA, Level 1, Revision N
• PostScript Language Reference Manual (Third Edition), Adobe Systems
Incorporated, Addison-Wesley Publishing
PCL
2-1
CHAPTER 2: PCL Emulation
When you select PCL emulation as the printer language, the printer supports the
Hewlett-Packard Company’s LaserJet Printer Command Language. This chapter
shows how to select PCL emulation and discusses PCL emulation commands, along
with resident PCL emulation font and symbol set support.
To determine which commands your printer supports, see Appendix A: “PCL Support”
on page A-1.
Selecting PCL Emulation
Using SmartSwitch
When SmartSwitch is enabled for both printer languages on an interface (for example,
Parallel, USB, Serial Option 1, or Network Option 1), the printer automatically switches
to the printer language being sent by your software program. The printer is shipped
with SmartSwitch enabled for both printer languages in all interfaces. The printer
examines all print jobs and switches dynamically between PostScript emulation and
PCL emulation.
Using the Operator Panel or MarkVision Professional
If SmartSwitch is set to Off for both printer languages, you can select PCL emulation
from your printer operator panel or from MarkVision™ Professional. See your printer
documentation for information on changing menu settings.
PCL
2-2
Using Your Software Program
To select PCL emulation, use the Printer Job Language (PJL) Enter Language
Command. See “ENTER LANGUAGE Command” on page 3-3 for more information.
See “Printer Job Language” on page 3-1 for the syntax and use of PJL.
Warning: When you change printer languages, you may lose some or all previously
downloaded resources, unless
Resource Save is set to On or the resources
are stored in flash memory or on disk.
PCL
2-3
Page Formatting
The printable areas and logical pages for PCL emulation (both portrait and landscape
orientation) are illustrated below. See the Legend that follows for definitions of areas
A through I.
Printable Areas
Legend:
A Portrait physical page width and landscape physical page length
B Portrait physical page length and landscape physical page width
C Portrait logical page width
D Landscape logical page width
E Distance between the side edge of the physical page and the logical page in portrait
F Distance between the side edge of the physical page and the logical page in landscape
G Distance between the top and bottom edge of the physical page and logical page
H Distance between the left and right edge of the physical page and the printable area in
portrait, or distance between the top and bottom edge of the physical page and printable
area in landscape
I Distance between the top and bottom edge of the physical page and the printable area in
portrait, or distance between the left and right edge of the physical page and the
printable area in landscape
Note: The tables beginning on page 2-4 list the page sizes and dimensions of each
area labeled on the preceding diagram for all paper and envelope sizes your
printer supports. If information about your printer is not included in the
following tables, see page 1-1 for information on how to get a Technical
Reference for your printer.
PCL
2-4
Lexmark™ C520, C522n, C524, C524n, C524dn, C530dn, C532n,
C532dn, C534n, C534dn, C534dtn, C770, C770n, C772, C772n,
C920, C920n, C920dn, and C920dnf
The following table lists page sizes and print area dimensions for all paper and
envelope sizes the Lexmark™ C520, C522n, C524, C524n, C524dn,C530dn, C532n,
C532dn, C534n, C534dn, C534dtn, C770, C770n, C772, C772n, C920, C920n,
C920dn, and C920dnf printers support. For more information about the printable
areas and logical pages for PCL emulation, see “Printable Areas” on page 2-3.
Table 2-1: Lexmark C520, C522n, C524, C524n, C524dn, C530dn, C532n, C534n, C534dn,
C534dtn, C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnfPaper and Envelope
Dimensions
Selection
Paper/Envelope
Dimensions
Dimensions by Area (pels)
1
Page Size
Parameters
2
Name mm inches A B C D E F G H I
Paper
13, 613 A5 148 x 210 5.83 x 8.27 3496 4960 3196 4720 142 118 0 100 100
12, 45, 612 JIS B5 Paper 182 x 257 7.2 x 10.1 4300 6070 4000 5830 150 120 0 100 100
26, 626 A4 (198 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4676 6778 142 118 0 80 80
26, 626 A4 (203 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4800 6778 80 118 0 80 80
1, 601 Executive 184 x 267 7.25 x 10.5 4350 6300 4050 6060 150 120 0 100 100
2, 602 Letter 216 x 279 8.5 x 11 5100 6600 4800 6360 150 120 0 100 100
3, 603 Legal 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
4 or 10 Folio 216 x 330 8.5 x 13 5100 7800 4800 7560 150 120 0 100 100
15 Statement 139.7 x 215.9 5.5 x 8.5 3300 5100 3000 4860 150 120 0 100 100
101 Universal 216 x 356 8.5 x 14 150 120 0 100 100
1
Pel dimensions are for 600 dpi.
2
Page Size Parameters are explained in Table 2-16 on page 2-54.
3
The width of the logical page for A4 paper can be changed from the printer operator panel or your software
application.
4
Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same
logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark
4039.
Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more
information, see “Print Area Menu Item” on page 2-6.
PCL
2-5
Envelope
90 DL 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100
91 C5 229 x 162 9.02 x 6.38 3826 5408 2542 5172 142 118 0 100 100
99
4
, 100 B5 Envelope 250 x 176 9.84 x 6.93 4156 5904 3872 5668 142 118 0 100 100
600 Other
Envelope
216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
89 9 (Com 9) 225 x 98 8.875 x 3.875 2326 5324 2024 5084 150 120 0 100 100
81 10 (Com 10) 241 x 105 9.5 x 4.125 2474 5700 2174 5460 150 120 0 100 100
80 7 3/4
(Monarch)
98 x 191 3.875 x 7.5 2326 4300 2024 4260 150 120 0 100 100
Table 2-1: Lexmark C520, C522n, C524, C524n, C524dn, C530dn, C532n, C534n, C534dn,
C534dtn, C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnfPaper and Envelope
Dimensions (Continued)
Selection
Paper/Envelope
Dimensions
Dimensions by Area (pels)
1
Page Size
Parameters
2
Name mm inches A B C D E F G H I
1
Pel dimensions are for 600 dpi.
2
Page Size Parameters are explained in Table 2-16 on page 2-54.
3
The width of the logical page for A4 paper can be changed from the printer operator panel or your software
application.
4
Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same
logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark
4039.
Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more
information, see “Print Area Menu Item” on page 2-6.
PCL
2-6
Print Area Menu Item
The printable area is the area on a sheet of paper within which a pel can be printed.
Logical page is a conceptual entity that defines the area in which margins (top, bottom,
left, right) may be set and the area in which the PCL cursor may be positioned.
The physical page border is the actual physical boundaries of a page.
The
Print Area menu item is available from the printer operator panel or through
MarkVision Professional. For some printers, Print Area supports three values: Normal,
Whole Page, and Fit to Page. See your printer documentation for more information
.
The Normal setting, which is the factory default, means the printable area includes the
entire page except the narrow border around the edge of the page. This is the
nonprintable area. The printer measures margin settings relative to the logical page.
For a more detailed explanation of the Normal setting, see “Printable Areas” on
page 2-3.
PCL
Logical
Page
Area
Physical
Page
Border
PCL
Printable
Area
Legend:
Only Portrait Orientation is shown for all settings.
Normal setting
Whole Page setting
PCL
2-7
The Whole Page setting only affects pages printed when using PCL emulation. If
Whole Page is selected, the PCL language sets the logical page area equal to the
physical page dimensions. Since the logical page dimensions and the physical page
dimensions are the same, in theory, the cursor may be positioned anywhere on the
page. However, the PCL language clips the image to the printable area. So, the Whole
Page setting is useful for printing scanned images that extend from edge to edge of a
page.
Some printers offer the Fit to Page setting. When Fit to Page is selected, PCL
emulation or PostScript emulation formats a page using a printable area equal to the
physical page, which is from one edge of the page to the other edge of the page. If you
use this setting, no clipping occurs. In Fit to Page, the PCL emulation logical page
dimensions are equal to the physical page dimensions, as in the Whole Page setting.
The printer holds this formatted image in memory, but when the page prints, the image
is compressed a small amount in both horizontal and vertical directions, and then
centered on the physical page for letter-size paper only. This process creates a small
margin around the image. This artificial margin prevents printing from one edge to the
other, since doing so could contaminate the printer and cause printing problems.
The following illustrations show an image held in memory for printing from one edge
to the other and how the image would actually print based on the Fit to Page setting.
Notice that a small border appears at the edges of the printed page, and the image is
slightly compressed.
Formatted Image with Fit to Page Printed Image with Fit to Page
Physical
Page
Edge
PCL
2-8
Font and Symbol Set Support for the Lexmark C520,
C522n, C524, C524n, C524dn, C530dn, C532n,
C532dn, C534n, C534dn, C534dtn, C770, C770n,
C772, C772n, C920, C920n, C920dn, C920dnf
Your printer has 91 resident fonts in PCL emulation, including 89 scalable fonts and
two bitmapped fonts.
Several parameters are used to select a font from the data stream. These include
symbol set, spacing, point or pitch, style, weight, and typeface number. For scalable
fonts, you can vary the size of a font by specifying pitch or point size. For bitmapped
fonts, you must choose the pitch or point size listed on the font sample pages. You can
print the font sample pages using a PJL command (see “LPRINTPCLFONTS” on
page 3-83.), or through MarkVision Professional (network models only). See your
printer documentation for more information.
A symbol set defines which characters are available for a font and the code point for
each of these characters. Your printer supports 88 resident symbol sets. The tables
beginning on page 2-10 show the symbol sets available for each font in
PCL emulation. Not all fonts support all symbol sets.
You can select a font as the PCL emulation default through MarkVision Professional
(network models only). See your printer documentation for more information.
The fonts are divided into three major groups. The first 47 fonts (R0 to R46) shown on
the font sample pages are the standard PCL emulation fonts. The next 39 fonts (R47
to R85) are called Type 1 fonts and were originally defined for PostScript emulation,
but now also work in the PCL emulation. The final five fonts (R86 to R90) are additional
specialty PCL emulation fonts. For a list of the 47 standard PCL emulation fonts, see
Table 2-2 on page 2-9. For a list of the 39 Type 1 fonts, see Table 2-3 on page 2-11.
For a list of the five additional specialty PCL emulation fonts, see Table 2-11 on
page 2-43. These tables list both the forward and backward compatibility font selection
commands. For more information on forward and backward compatibility, see
page 2-9. For more information on selecting symbol sets, see page 2-38.
For compatibility purposes, you can disable Type 1 fonts with the Printer Job
Language (PJL) LTYPE1FONTS command. The factory default for these fonts is
Enabled. See LTYPE1FONTS on page 3-48 for more information.
PCL
2-9
You can also select fonts using PJL commands. The selection parameter is the
number portion from the font identifier shown on the font sample pages, such as 0 or
76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning
on page 2-9 to select a symbol set. If a symbol set does not have a PJL value, use the
symbol set ID to select the symbol set. A font selection can be either temporary or set
as the default.
Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER,
PITCH, PTSIZE, SYMSET, SET, DEFAULT. See “Table 3-5: Common Variables for
PCL Emulation” on page 3-48 for more information about these commands.
Forward and Backward Compatibility Modes for the
Lexmark C520, C522n, C524, C524n, C524dn, C530dn, C532n,
C534n, C534dn, C534dn, C534dtn, C770, C770n, C772, C772n,
C920, C920n, C920dn, C920dnf
Your PCL emulation has forward and backward compatibility modes. The forward
compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s
LaserJet 4050. The backward compatibility mode is used for compatibility with the
Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers.
Standard PCL Emulation Fonts
The following table lists the font selection commands for forward and backward
compatibility mode for each of the 47 standard PCL emulation fonts. Since the font
selection commands for the forward and backward compatibility modes are identical,
they are listed together in the table.
Table 2-2: Forward and Backward Compatibility Font Selection Commands
Standard PCL Emulation Font Name
Forward and Backward Compatibility Mode
Spacing Style Weight Typefac e
Courier 0004099
Courier Italic 0104099
Courier Bold 0034099
Courier Bold Italic 0134099
CG Times 1004101
CG Times Italic 1104101
1
This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.
PCL
2-10
CG Times Bold 1034101
CG Times Bold Italic 1134101
Univers Medium 1004148
Univers Medium Italic 1104148
Univers Bold 1034148
Univers Bold Italic 1134148
Times New Roman 10016901
Times New Roman Italic 11016901
Times New Roman Bold 10316901
Times New Roman Bold Italic 11316901
Arial 10016602
Arial Italic 11016602
Arial Bold 10316602
Arial Bold Italic 11316602
Letter Gothic 0004102
Letter Gothic Italic 0104102
Letter Gothic Bold 0034102
Univers Condensed Medium 1404148
Univers Condensed Medium Italic 1504148
Univers Condensed Bold 1434148
Univers Condensed Bold Italic 1534148
Garamond Antiqua 1004197
Garamond Kursiv 1104197
Garamond Halbfett 1034197
Garamond Kursiv Halbfett 1134197
CG Omega 1004113
CG Omega Italic 1104113
CG Omega Bold 1034113
CG Omega Bold Italic 1134113
Antique Olive 1004168
Antique Olive Italic 1104168
Antique Olive Bold 1034168
Albertus Medium 1014362
Table 2-2: Forward and Backward Compatibility Font Selection Commands (Continued)
Standard PCL Emulation Font Name
Forward and Backward Compatibility Mode
Spacing Style Weight Typefac e
1
This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.
PCL
2-11
Type 1 Fonts
Thirty of the Type 1 fonts have different font selection parameters in the forward and
backward compatibility modes and nine of the fonts work only in the forward
compatibility mode. With the appropriate printer driver installed and selected, your
software program selects these fonts.
The following table shows the font selection commands for forward and backward
compatibility modes and indicates the font group for each font. All Type 1 fonts are
supported by both the Hewlett-Packard Company’s LaserJet 4050 and the
Lexmark family of printers unless otherwise noted.
Albertus Extra Bold 1044362
Clarendon Condensed Bold 1434140
Marigold 1004297
Coronet 1104116
Line Printer 16 0000
POSTNET Barcode
1
1000
Wingdings 10031402
Symbol 10016686
Table 2-3: Forward and Backward Compatibility Font Selection Commands
Type 1 Font name
Forward Compatibility Mode Backward Compatibility Mode
Spacing Style Weight Typeface Spacing Style Weight Ty peface
Helvetica 1002458010061444
Helvetica Italic 1102458011061444
Helvetica Bold 1032458010361444
Helvetica Bold Italic 1132458011361444
Helvetica Narrow 1402458014061444
Helvetica Narrow Italic 1502458015061444
Helvetica Narrow Bold 1432458014361444
1
Notice the values for forward and backward compatibility modes differ slightly for Bold.
2
This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.
3
This font is not implemented in the Lexmark family of printers.
Table 2-2: Forward and Backward Compatibility Font Selection Commands (Continued)
Standard PCL Emulation Font Name
Forward and Backward Compatibility Mode
Spacing Style Weight Typefac e
1
This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.
PCL
2-12
Helvetica Narrow Bold Italic 1532458015361444
Palatino Roman 1002459110061455
Palatino Italic 1102459111061455
Palatino Bold 1032459110361455
Palatino Bold Italic 1132459111361455
ITC Bookman Light 1 0 -3 24623 1 0 -3 61487
ITC Bookman Light Italic 1 1 -3 24623 1 1 -3 61487
ITC Bookman Demi 1022462310261487
ITC Bookman Demi Italic 1122462311261487
ITC Avant Garde Book 1002460710061471
ITC Avant Garde Book Oblique1102460711061471
ITC Avant Garde Demi
1
1022460710361471
ITC Avant Garde Demi Oblique
1
1122460711361471
Century Schoolbook Roman 1002470310061463
Century Schoolbook Italic 1102470311061463
Century Schoolbook Bold 1032470310361463
Century Schoolbook Bold Italic1132470311361463
ITC Zapf Chancery Medium Italic1104509911061483
CourierPS
3
00024579
CourierPS Oblique
3
01024579
CourierPS Bold
3
00324579
CourierPS Bold Oblique
3
01324579
Times Roman
3
10025093
Times Italic
3
11025093
Times Bold
3
10325093
Times Bold Italic
3
11325093
Helvetica Light
2
10-32458010-361444
Helvetica Light Oblique
2
11-32458011-361444
Helvetica Black
2
1052458010561444
Helvetica Black Oblique
2
1152458011561444
Table 2-3: Forward and Backward Compatibility Font Selection Commands (Continued)
Type 1 Font name
Forward Compatibility Mode Backward Compatibility Mode
Spacing Style Weight Typeface Spacing Style Weight Ty peface
1
Notice the values for forward and backward compatibility modes differ slightly for Bold.
2
This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.
3
This font is not implemented in the Lexmark family of printers.
PCL
2-13
Your Lexmark printer defaults to the forward compatibility mode to enable a Hewlett-
Packard Company’s driver to select the forward compatibility fonts. The Lexmark PCL
emulation driver uses the backward compatibility mode and temporarily switches the
printer to this mode. The PCL (PJL) emulation commands to switch the default
compatibility modes are:
Forward
ESC
%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL6
@PJL RESET
ESC
%-12345X
Backward
ESC
%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL5
@PJL RESET
ESC
%-12345X
Specialty PCL Fonts
The following table lists the font selection commands for forward and backward
compatibility mode for each of the five specialty PCL emulation fonts. Since the font
selection commands for the forward and backward compatibility modes are identical,
they are listed together in the table. These fonts are supported only in PCL 5
emulation, not in PCL XL.
SymbolPS
3
10045358
ITC Zapf Dingbats 1004510110061485
Table 2-4: Forward and Backward Compatibility Font Selection Commands
Standard PCL Emulation Font Name
Forward and Backward Compatibility Mode
Spacing Style Weight Typeface
C39 Narrow
1
10032774
C39 Regular
1
10032772
C39 Wide
1
10032777
OCR-A
1
00023584
OCR-B
1
00023590
1
This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.
Table 2-3: Forward and Backward Compatibility Font Selection Commands (Continued)
Type 1 Font name
Forward Compatibility Mode Backward Compatibility Mode
Spacing Style Weight Typeface Spacing Style Weight Ty peface
1
Notice the values for forward and backward compatibility modes differ slightly for Bold.
2
This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.
3
This font is not implemented in the Lexmark family of printers.
PCL
2-14
Selecting Symbol Sets for Lexmark C520, C522n, C524m C542b
C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn, C770,
C770n, C772, C772n, C920, C920n, C920dn, C920dnt
To determine if a font or typeface supports a symbol set, see the complete listing of
PCL emulation fonts and symbol sets in the following tables: “Table 2-7: TC520,
C522n, C524, C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, and C920dnf PCL Emulation
Symbol Sets - Specials” on page 2-26, “Table 2-9: TC520, C522n, C524, C524n,
C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn, C770, C770n, C772,
C772n, C920, C920n, C920dn, and C920dnf PCL Emulation Symbol Sets - Latin 1”
on page 2-32, and “Table 2-11: TC520, C522n, C524, C524n, C524dn, C530dn,
C532n, C532dn, C534n, C534dn, C534dtn, C770, C770n, C772, C772n, C920,
C920n, C920dn, and C920dnf PCL Emulation Symbol Sets - Specials” on page 2-43.
Selecting Symbol Sets for the Lexmark C520, C522n, C524, C524n,
C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn, C770,
C770n, C772, C772n, C920, C920n, C920dn, C920dnf
To determine if a font or typeface supports a symbol set, see the complete listing of
PCL emulation fonts and symbol sets in the following tables: “Table 2-7: TC520,
C522n, C524, C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, and C920dnf PCL Emulation
Symbol Sets - Specials” on page 2-26, “Table 2-10: C520, C522n, C524, C524n,
C530dn, C532n, C532dn, C534n, C534dn, C534dtn, C524dn, C770, C770n, C772n,
C772n, C920, C920n, C920dn, and C920dnf PCL Emulation Symbol Sets - Latin 2,
Latin 5, Latin 6, Cyrillic, Greek” on page 2-37, and “Table 2-11: TC520, C522n, C524,
PCL
2-15
C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn, C770, C770n,
C772, C772n, C920, C920n, C920dn, and C920dnf PCL Emulation Symbol Sets -
Specials” on page 2-43
Table 2-5: C520, C522n, C524, C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnf PCL Emulation Symbol Sets - Latin 1
Latin 1
Typeface / Symbol Set
Legal
Windows 3.0 Latin 1
Windows 98 Latin 1
ISO 8859-1 Latin 1 (ECMA-94)
ISO 8859-15 Latin 9
PC-8, Code Page 437
PC-8 Danish/Norwegian (437N)
PC-850 Multilingual
PC-858 Multilingual Euro
PC-860 Portugal
PC-861 Iceland
PC-863 Canadian French
PC-865 Nordic
PC-1004 OS/2
ABICOMP Brazil/Portugal
ABICOMP International
Roman-8
Roman-9
Roman Extension
PS Text
MC Text
Desk Top
Ventura International
Ventura US
PJL Value
LEGAL
WIN30
WINL1
ISOL1
ISOL9
PC8
PC8DN
PC850
PC858
ROMAN8
PSTEXT
DESKTOP
VNINTL
VNUS
Symbol Set ID
1U
9U
19U
0N
9N
10U
11U
12U
13U
20U
21U
23U
25U
9J
13P
14P
8U
4U
0E
10J
12J
7J
13J
14J
Courier ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Courier Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Courier Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Courier Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CG Times ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CG Times Italic ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CG Times Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CG Times Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Medium ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Medium Italic ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Times New Roman ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Times New Roman Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Times New Roman Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
✓ Indicates Typeface supports the specified Symbol Set.
✘ Indicates Typeface does not support the specified Symbol Set.
PCL
2-16
Times New Roman Bold Italic ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Arial ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Arial Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Arial Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Arial Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Letter Gothic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Letter Gothic Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Letter Gothic Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Condensed Medium ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Condensed Medium Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Condensed Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Univers Condensed Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Garamond Antiqua ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Garamond Kursiv ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Garamond Halbfett ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Garamond Kursiv Halbfett ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CG Omega ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CG Omega Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CG Omega Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Table 2-5: C520, C522n, C524, C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnf PCL Emulation Symbol Sets - Latin
1 (Continued)
Latin 1
Typeface / Symbol Set
Legal
Windows 3.0 Latin 1
Windows 98 Latin 1
ISO 8859-1 Latin 1 (ECMA-94)
ISO 8859-15 Latin 9
PC-8, Code Page 437
PC-8 Danish/Norwegian (437N)
PC-850 Multilingual
PC-858 Multilingual Euro
PC-860 Portugal
PC-861 Iceland
PC-863 Canadian French
PC-865 Nordic
PC-1004 OS/2
ABICOMP Brazil/Portugal
ABICOMP International
Roman-8
Roman-9
Roman Extension
PS Text
MC Text
Desk Top
Ventura International
Ventu ra US
PJL Value
LEGAL
WIN30
WINL1
ISOL1
ISOL9
PC8
PC8DN
PC850
PC858
ROMAN8
PSTEXT
DESKTOP
VNINTL
VNUS
Symbol Set ID
1U
9U
19U
0N
9N
10U
11U
12U
13U
20U
21U
23U
25U
9J
13P
14P
8U
4U
0E
10J
12J
7J
13J
14J
✓ Indicates Typeface supports the specified Symbol Set.
✘ Indicates Typeface does not support the specified Symbol Set.
PCL
2-17
CG Omega Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Antique Olive ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Antique Olive Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Antique Olive Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Albertus Medium ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Albertus Extra Bold ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Clarendon Condensed Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Marigold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Coronet ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica Narrow ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica Narrow Italic ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica Narrow Bold ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Helvetica Narrow Bold Italic ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Palatino Roman ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Palatino Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Table 2-5: C520, C522n, C524, C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnf PCL Emulation Symbol Sets - Latin
1 (Continued)
Latin 1
Typeface / Symbol Set
Legal
Windows 3.0 Latin 1
Windows 98 Latin 1
ISO 8859-1 Latin 1 (ECMA-94)
ISO 8859-15 Latin 9
PC-8, Code Page 437
PC-8 Danish/Norwegian (437N)
PC-850 Multilingual
PC-858 Multilingual Euro
PC-860 Portugal
PC-861 Iceland
PC-863 Canadian French
PC-865 Nordic
PC-1004 OS/2
ABICOMP Brazil/Portugal
ABICOMP International
Roman-8
Roman-9
Roman Extension
PS Text
MC Text
Desk Top
Ventura International
Ventu ra US
PJL Value
LEGAL
WIN30
WINL1
ISOL1
ISOL9
PC8
PC8DN
PC850
PC858
ROMAN8
PSTEXT
DESKTOP
VNINTL
VNUS
Symbol Set ID
1U
9U
19U
0N
9N
10U
11U
12U
13U
20U
21U
23U
25U
9J
13P
14P
8U
4U
0E
10J
12J
7J
13J
14J
✓ Indicates Typeface supports the specified Symbol Set.
✘ Indicates Typeface does not support the specified Symbol Set.
PCL
2-18
Palatino Bold ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Palatino Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Bookman Light ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Bookman Light Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Bookman Demi ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Bookman Demi Italic ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Avant Garde Book ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Avant Garde Book Oblique ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Avant Garde Demi ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Avant Garde Demi Oblique ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Century Schoolbook Roman ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Century Schoolbook Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Century Schoolbook Bold ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Century Schoolbook Bold Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
ITC Zapf Chancery Medium Italic ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CourierPS ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CourierPS Oblique ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CourierPS Bold ✓✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
CourierPS Bold Oblique ✓✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Table 2-5: C520, C522n, C524, C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn,
C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnf PCL Emulation Symbol Sets - Latin
1 (Continued)
Latin 1
Typeface / Symbol Set
Legal
Windows 3.0 Latin 1
Windows 98 Latin 1
ISO 8859-1 Latin 1 (ECMA-94)
ISO 8859-15 Latin 9
PC-8, Code Page 437
PC-8 Danish/Norwegian (437N)
PC-850 Multilingual
PC-858 Multilingual Euro
PC-860 Portugal
PC-861 Iceland
PC-863 Canadian French
PC-865 Nordic
PC-1004 OS/2
ABICOMP Brazil/Portugal
ABICOMP International
Roman-8
Roman-9
Roman Extension
PS Text
MC Text
Desk Top
Ventura International
Ventu ra US
PJL Value
LEGAL
WIN30
WINL1
ISOL1
ISOL9
PC8
PC8DN
PC850
PC858
ROMAN8
PSTEXT
DESKTOP
VNINTL
VNUS
Symbol Set ID
1U
9U
19U
0N
9N
10U
11U
12U
13U
20U
21U
23U
25U
9J
13P
14P
8U
4U
0E
10J
12J
7J
13J
14J
✓ Indicates Typeface supports the specified Symbol Set.
✘ Indicates Typeface does not support the specified Symbol Set.
Loading...