The following information is from Lexmark's Service Mnaual.
following paragraph does not apply to any country where such provisions are inconsistent with local law:
The
LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warr anties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the
programs described may be made at any time.
Comments may be addressed to Lexma rk International, Inc., Department D22A/032-2, 740 West New Circle Road,
Lexington, Kent ucky 40550, U.S.A or e-mail at ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any
of the inf ormati on you supply in any way it believes approp riat e wit hout incurring any obligation to you.
Lexmark, Lexmark with diamond des ign, and MarkNet are trademarks of Lexmark International, Inc., registe red i n the
United States and/or other countries.
ImageQuic k, Optra Forms, and Print Crypti on are trademarks of Lexmark International , Inc.
LEXFAX is a service mark of Lexmark International, Inc.
PostScript® is a registered trademark of Adobe Systems Incorporated.
PCL® is a registered trademark of the Hewlett-Packard Company.
Other trademarks are the property of their respective owners.
2006 Copyright Lexmark International, Inc.
All rights reserved .
UNITED STATES GOVERNMENT RIGHTS
This softwa re and any accompan ying docum entation pro vided under th is agreement are commercial computer soft ware and
documentation developed exclusively at private expe nse.
Lexmark and Lexmark with diamond design are
trademarks of Lexmark International, Inc., registered
in the United States and/or other countries .
5056-XXX
Parts catalog
How to use this parts catalog
The following legend is used in the parts catalog:
AsmIndex
Part
number
Units/
mach
Description
•Asm-index: identif ies the assembly and the it em in the diagram. For example, 3-1 in dicates assembly 3
and the item number 1.
•Part number: identifies the unique number that identifies this FRU.
•Units/mach: refers to the number of units actual ly used in the machine or produc t.
•NS: (Not shown) in the Asm-In dex column indicates that the part is procurable, but is not pictured in the
illustration.
•PP: (Parts Packet) in the par ts description colum n indicates that the part i s contained in a parts packet.
Parts catalog 7-1
5056-XXX
Assembly 1: Covers 1
15
14
1
2
3
11
12
13
10
4
7
8
9
6
5
7-2 Service Manual
5056-XXX
Assembly 1: Covers 1
IndexP/NUnitsDescription
1—140X11311Cover, top
1—240X1 1241Cover assembly, right side
1—340X1 1391Magnet, right side l atch
1—440X12591Operator panel
1—540X1 1231Cover assembly, front
1—656P95451Label, operator panel
1—740X11321Cover, waste toner bottle
1—840X1 1401Magnet, front cover l atch
1—940X11291Cover, left front
1—1040X11261Cover, left side
1—1140X11271Cover, paper feed
1—1240X11251Cover, solenoid
1—1340X11221Tray assembly, exit
1—1440X11281Cover, rear
1—1540X11301Cover, adjustment
6—956P96251Hook, right link
6—1056P96262Cover, hook
6 —1 140X1 1181Cable, RFID
6—1240X11171Assembly, RFID
6—1340X1 1451Hook, middle
6—1440X1 1471Hook, right
6—1540X12571Handle, up opening
6—1640X11431Bracket, front upper
6—1740X1 1461Hook, left
6—1840X1 1441Rod, interlocking
6—1956P96301Hook, left link
6—2040X1 1424Holder, front hsp
6—21A40X11331Assembly , LED printhead (K)
6—21B40X11343Assembly , LED printhead (C)
6—2256P96114Holder, front printhead
6—2356P95924Rail, left side
6—2456P96104Rail, right side
6—2556P96291Link, frame
6—2656P95944Cover, eraser
6—27A40X10281Lamp, M erase
6—27B40X10291Lamp, C erase
6—27C40X10301Lamp, Y erase
6—27D40X10311Lamp, K erase
6—2856P95934Holder , r ear printhead
6—2956P96098Spring, printhead
6—3040X11481Bracket, rear upper
6—3140X10321Fan, upper right
6—3240X10331Fan, upper left
6—3356P96211Bracket, fan holder
NS56P99934Shield, light ( used on p/n 56P9594)
NS40X1263Parts packet
Parts catalog 7-9
5056-XXX
Assem b ly 7: Pa per feed
9
7
8
10
11
12
11
13
6
4
3
5
16
14
15
19
17
29
18
20
1
2
23
22
21
18
7-10 Service Manual
28
27
26
25
24
5056-XXX
Assembly 7: Paper f eed
IndexP/NUnitsDescription
7 — 140X11191Shaft, changing
7 — 240X110 32Bushing, turn guide
7 — 340X11121Assembly, drive link
7 — 440X12471Sensor, humidity (not included in 7-3)
7 — 540X10821Clutch, paper feed
7 — 640X10811Clutch, roller 6 x 10 x 14
7 — 740X10751Assembly, paper-feed base
7 — 840X110 71Sensor, relay
7 — 940X110 81Roller, rel ay
7 — 1040X10791Roller, separator
7 — 1 140X11061Clip, paper-feed shaft
7 — 1240X10801Clutch, friction (torque limiter)
7 — 1340X10781Roller, paper feed
7 — 1440X10771Roller, pic kup
7 — 1540X117 32Interrupt, photo
7 — 1640X10981Cable asm, paper-feed type 1
7 — 1740X10761Plate, guide rocking
7 — 1856P95034Foot, rubber
7 — 1956P96411Actuator, front cover open switch
7 — 2056P95241Screw, slide rail
7 — 2140X10341Rail, base left side
7 — 2240X10831Board, CK2 daughter board/sensor
7 — 2356P95211Lever, size sense
7 — 2440X10351Unit, drive 120V
7 — 2440X10361Unit, drive 230V
7 — 2540X11501Clutch, drive unit
7 — 2656P96441Cable asm, drive unit sensor
7 — 2756P96451Sensor, dri ve unit
7 — 2840X10371Clutch, belt up/down
7 — 2940X10381Frame, sub
NS40X1264-Parts packet (See “Parts packets” on page 7-58 for contents)
Parts catalog 7-11
5056-XXX
Assembly 8: Base 2
7-12 Service Manual
5056-XXX
Assembly 8: Base 2
IndexP/NUnitsDescription
8 — 140X12071Support assembly, upper unit
256P96674Pin, upper unit support
340X27761Stop, right
440X27791Cover, black photodeveloper
540X12081Handle assembly, lock
656P96691Handle, lock
740X27781Stop, left
840X11511Cover, electronic