Lexmark 24TT366, 24TT371, 24TT373, 24TT374, 24TT383 User Manual

...
0 (0)
MX810 Series
User's Guide
February 2014 www.lexmark.com
Machine type(s):
7463
Model(s):
436, 636, 836

Contents

Learning about the printer...........................................................................9
Finding information about the printer......................................................................................................9
Selecting a location for the printer..........................................................................................................10
Printer configurations.............................................................................................................................12
Understanding the basic functions of the scanner..................................................................................13
Using the ADF and scanner glass.............................................................................................................14
Understanding the printer control panel....................................................15
Using the printer control panel...............................................................................................................15
Understanding the colors of the Sleep button and indicator lights........................................................15
Understanding the home screen.............................................................................................................16
Using the touch-screen buttons..............................................................................................................18
Setting up and using the home screen applications....................................20
Finding the IP address of the printer.......................................................................................................20
Finding the IP address of the computer..................................................................................................20
Accessing the Embedded Web Server.....................................................................................................20
Customizing the home screen.................................................................................................................21
Understanding the different applications...............................................................................................21
Activating the home screen applications................................................................................................22
Finding information about the home screen applications................................................................................ 22
Setting up Forms and Favorites ........................................................................................................................ 22
Setting up Card Copy ........................................................................................................................................23
Using MyShortcut .............................................................................................................................................23
Setting up Multi Send .......................................................................................................................................24
Setting up Scan to Network ..............................................................................................................................24
Setting up Remote Operator Panel.........................................................................................................25
Exporting and importing a configuration................................................................................................26
Additional printer setup.............................................................................27
Installing internal options........................................................................................................................27
Installing hardware options.....................................................................................................................46
Attaching cables......................................................................................................................................49
Setting up the printer software...............................................................................................................51
Contents 2
Networking..............................................................................................................................................52
Verifying printer setup............................................................................................................................56
Loading paper and specialty media............................................................57
Setting the paper size and type...............................................................................................................57
Configuring Universal paper settings......................................................................................................57
Loading the 550sheet tray.....................................................................................................................57
Loading the 2100sheet tray...................................................................................................................67
Loading the multipurpose feeder............................................................................................................74
Linking and unlinking trays......................................................................................................................80
Paper and specialty media guide................................................................82
Using specialty media..............................................................................................................................82
Paper guidelines......................................................................................................................................84
Supported paper sizes, types, and weights.............................................................................................87
Printing......................................................................................................92
Printing forms and a document...............................................................................................................92
Printing from a flash drive or mobile device...........................................................................................93
Printing confidential and other held jobs................................................................................................95
Printing information pages......................................................................................................................97
Canceling a print job................................................................................................................................97
Copying......................................................................................................99
Making copies.........................................................................................................................................99
Copying photos......................................................................................................................................100
Copying on specialty media...................................................................................................................100
Creating a copy shortcut using the printer control panel.....................................................................101
Customizing copy settings.....................................................................................................................102
Placing information on copies...............................................................................................................107
Canceling a copy job..............................................................................................................................108
Understanding the copy options...........................................................................................................108
E-mailing..................................................................................................111
Setting up the printer to e-mail.............................................................................................................111
Creating an e-mail shortcut...................................................................................................................112
E-mailing a document............................................................................................................................113
Customizing e-mail settings...................................................................................................................114
Contents 3
Canceling an e-mail...............................................................................................................................115
Understanding the e-mail options........................................................................................................115
Faxing......................................................................................................118
Setting up the printer to fax..................................................................................................................118
Sending a fax.........................................................................................................................................134
Creating shortcuts.................................................................................................................................137
Customizing fax settings........................................................................................................................137
Canceling an outgoing fax.....................................................................................................................139
Holding and forwarding faxes...............................................................................................................139
Understanding the fax options..............................................................................................................140
Scanning...................................................................................................143
Using Scan to Network..........................................................................................................................143
Scanning to an FTP address...................................................................................................................143
Scanning to a computer or flash drive..................................................................................................145
Understanding the scan options...........................................................................................................147
Understanding the printer menus............................................................150
Menus list..............................................................................................................................................150
Paper menu...........................................................................................................................................151
Reports menu........................................................................................................................................164
Network/Ports menu.............................................................................................................................165
Security menu.......................................................................................................................................178
Settings menu........................................................................................................................................183
Help menu.............................................................................................................................................233
Saving money and the environment.........................................................235
Saving paper and toner.........................................................................................................................235
Saving energy........................................................................................................................................236
Recycling................................................................................................................................................238
Securing the printer..................................................................................240
Statement of Volatility..........................................................................................................................240
Erasing volatile memory........................................................................................................................240
Erasing nonvolatile memory................................................................................................................241
Erasing printer hard disk memory.........................................................................................................241
Configuring printer hard disk encryption..............................................................................................242
Contents 4
Finding printer security information.....................................................................................................243
Maintaining the printer............................................................................244
Cleaning printer parts............................................................................................................................244
Checking the status of parts and supplies.............................................................................................248
Estimated number of remaining pages.................................................................................................249
Ordering supplies..................................................................................................................................249
Storing supplies.....................................................................................................................................252
Replacing supplies.................................................................................................................................253
Moving the printer................................................................................................................................261
Managing the printer...............................................................................263
Finding advanced networking and administrator information.............................................................263
Checking the virtual display...................................................................................................................263
Setting up email alerts.........................................................................................................................263
Viewing reports.....................................................................................................................................263
Configuring supply notifications from the Embedded Web Server.......................................................264
Restoring factory default settings.........................................................................................................265
Clearing jams............................................................................................266
Avoiding jams........................................................................................................................................266
Understanding jam messages and locations.........................................................................................269
[x]page jam, lift front cover to remove cartridge. [200–201]..............................................................271
[x]page jam, open upper rear door. [202]...........................................................................................275
[x]page jam, open upper and lower rear door. [231–234]..................................................................277
[x]page jam, remove standard bin jam. [203]......................................................................................281
[x]page jam, remove tray 1 to clear duplex. [235–239].......................................................................282
[x]page jam, open tray [x]. [24x]..........................................................................................................283
[x]page jam, clear manual feeder. [250]..............................................................................................284
[x]page jam, open mailbox rear door. Leave paper in bin. [4yy.xx].....................................................285
[x]page jam, open automatic feeder top cover. [28y.xx].....................................................................288
[x]page jam, remove paper, open finisher rear door. Leave paper in bin. [451].................................289
[x]page jam, remove paper, open stapler door. Leave paper in bin. [455–457]..................................290
Troubleshooting.......................................................................................294
Understanding the printer messages....................................................................................................294
Solving printer problems.......................................................................................................................313
Contents 5
Solving print problems..........................................................................................................................320
Solving copy problems..........................................................................................................................346
Solving fax problems.............................................................................................................................349
Solving scanner problems.....................................................................................................................355
Solving home screen application problems...........................................................................................360
Embedded Web Server does not open.................................................................................................360
Contacting customer support................................................................................................................361
Notices.....................................................................................................362
Product information..............................................................................................................................362
Edition notice........................................................................................................................................362
Power consumption..............................................................................................................................366
Index........................................................................................................379
Contents 6

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
Do not place or use this product near water or wet locations.
CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure.
This product uses a printing process that heats the print media, and the heat may cause the media to release emissions.
You must understand the section in your operating instructions that discusses the guidelines for selecting print media
to avoid the possibility of harmful emissions.
CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced. There is a
danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a
lithium battery. Discard used lithium batteries according to the manufacturer's instructions and local
regulations.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or
printer damage:
Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
Disconnect all cords and cables from the printer before moving it.
If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the
right side of the tray toward the front of the tray until it clicks into place.
Use the handholds located on both sides of the printer to lift it.
Make sure your fingers are not under the printer when you set it down.
Before setting up the printer, make sure there is adequate clearance around it.
Use only the power cord provided with this product or the manufacturer's authorized replacement.
Use only the telecommunications (RJ11) cord provided with this product or a 26 AWG or larger replacement when
connecting this product to the public switched telephone network.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system
connections) are properly installed in their marked plug-in ports.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific
manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not
responsible for the use of other replacement parts.
CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not
subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture
and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly
for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.
Safety information 7
Refer service or repairs, other than those described in the user documentation, to a service representative.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer,
unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using multiple input options. If you purchased a
multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more
information, see
www.lexmark.com/multifunctionprinters.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
SAVE THESE INSTRUCTIONS.
Safety information 8

Learning about the printer

Finding information about the printer

What are you looking for? Find it here
Initial setup instructions:
Connecting the printer
Installing the printer software
Setup documentation—The setup documentation came
with the printer and is also available at
http://support.lexmark.com.
Additional setup and instructions for using the printer:
Selecting and storing paper and specialty media
Loading paper
Configuring printer settings
Viewing and printing documents and photos
Setting up and using the printer software
Configuring the printer on a network
Caring for and maintaining the printer
Troubleshooting and solving problems
User's Guide and Quick Reference Gu ide—The guides may
be available on the Software and Documentation CD.
For more information, visit
http://support.lexmark.com.
Instructions for:
Connecting the printer to an Ethernet network
Troubleshooting printer connection problems
Networking Guide—Open the Software and
Documentation CD, and then navigate to:
Documentation > User’s Guide and other publications >
Networking Guide
Help using the prin ter software Windows or Mac Help—Open a printer software program
or application, and then click Help.
Click
?
to view contextsensitive information.
Notes:
Help is automatically installed with the printer
software.
The printer software is located in the printer
program folder or on the desktop, depending on
your operating system.
Learning about the printer 9
What are you looking for? Find it here
The latest supplemental information, updates, and customer
support:
Documentation
Driver downloads
Live chat support
Email support
Voice support
Lexmark support Web site—
http://support.lexmark.com
Note: Select your country or region, and then select
your product to view the appropriate support site.
Support telephone numbers and hours of operation for
your country or region can be found on the support Web
site or on the printed warranty that came with your
printer.
Record the following information (located on the store
receipt and at the back of the printer), and have it ready
when you contact customer support so that they may
serve you faster:
Machine Type number
Serial number
Date purchased
Store where purchased
Warranty information Warranty information varies by country or region:
In the U.S.—See the Statement of Limited Warranty
included with this printer, or at
http://support.lexmark.com.
In other countries and regions—See the printed
warranty that came with your printer.

Selecting a location for the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any
options, then leave enough room for them also. It is important to:
Set up the printer near a properly grounded and easily accessible electrical outlet.
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee
156 standard.
Provide a flat, sturdy, and stable surface.
Keep the printer:
Clean, dry, and free of dust.
Away from stray staples and paper clips.
Away from the direct airflow of air conditioners, heaters, or ventilators.
Free from direct sunlight and humidity extremes.
Observe the recommended temperatures and avoid fluctuations:
Ambient temperature 15.6 to 32.2°C (60 to 90°F)
Storage temperature 1 to 35°C (34 to 95°F)
Allow the following recommended amount of space around the printer for proper ventilation:
Learning about the printer 10
1 Right side 152 mm (6 in.)
2 Front 394 mm (15.5 in.)
3 Left side 152 mm (6 in.)
4 Rear 152 mm (6 in.)
5 Top 152 mm (6 in.)
Learning about the printer 11

Printer configurations

Basic model
2
3
5
1
6
7
8
4
10
9
1 Automatic document feeder (ADF)
2 ADF tray
3 ADF bin
4 4bin mailbox
5 Standard bin
6 Multipurpose feeder
7 Standard 550-sheet tray
8 2100-sheet tray
9 Caster base
10 Printer control panel
Learning about the printer 12
Configured model
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using multiple input options. If you purchased a
multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more
information, see
www.lexmark.com/multifunctionprinters.
4
5
1
2
3
Hardware option Alternative hardware option
1 Staple finisher
4bin mailbox
Offset stacker
Staple, hole punch finisher
2 550sheet trays 2100sheet tray
3 Caster base None
4 2100sheet tray 550sheet trays
5 4bin mailbox
Staple finisher
Staple, hole punch finisher
Offset stacker
When using optional trays:
Always use a caster base when the printer is configured with a 2100sheet tray.
The 2100sheet tray must always be at the bottom of a configuration.
You cannot use an optional 550sheet tray if the 2100sheet tray is installed.
A maximum of three optional trays may be configured with the printer.
The printer supports only one finisher at a time.

Understanding the basic functions of the scanner

Make quick copies or set the printer to perform specific copy jobs.
Send a fax using the printer control panel.
Learning about the printer 13
Send a fax to multiple fax destinations at the same time.
Scan documents and send them to your computer, an e-mail address, a flash drive, or an FTP destination.
Scan documents and send them to another printer (PDF through an FTP).

Using the ADF and scanner glass

Automatic document feeder (ADF) Scanner glass
ABC
Use the ADF for mu ltiplepage documents including two-
sided (duplex) pages.
Use the scanner glass for singlepage documents, book pages,
small items (such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
You can use the ADF or the scanner glass to scan documents.
Using the ADF
When using the ADF:
Load the document into the ADF tray faceup, short edge first.
Load up to 150 sheets of plain paper into the ADF tray.
Scan sizes from 76.2 x 127 mm (3 x 5 inches) wide to 216 x 635 mm (8.5 x 25 inches) long
Scan media weighs from 52 to 120 g/m
2
(14–32 lb).
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
Using the scanner glass
When using the scanner glass:
Place a document facedown on the scanner glass in the corner with the green arrow.
Scan or copy documents up to 216 x 355.6 mm (8.5 x 14 inches).
Copy books up to 25.3 mm (1 inch) thick.
Learning about the printer 14

Understanding the printer control panel

Using the printer control panel

1
@ ! .
2
A B C
3
D E F
4
G H I
5
J K L
6
M N O
7
P Q R S
8
T U V
9
W X Y Z
*
0
#
C
1
2
3
8
7
6
4
5
Use the To
1 Display
View the printer status and messages.
Set up and operate the printer.
2 Home button Go to the home screen.
3 Sleep button Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep mode:
Touch the screen or press any hard button.
Open a door or cover.
Send a print job from the computer.
Perform a poweron reset (POR) with the main power switch.
Attach a device to the USB port on the printer.
4 Keypad Enter numbers, letters, or symbols.
5 Start button Start a job, depending on which mode is selected.
6 Clear all / Reset button Reset the default settings of a function, such as copying, faxing, or scanning.
7 Stop or Cancel button Stop all printer activity.
8 Indicator light Check the status of the printer.
Understanding the colors of the Sleep button and indicator
lights
The colors of the Sleep button and indicator l ights on the printer control panel signify a certain printer s tatus or condition.
Indicator light Printer status
Off The printer is off or in Hibernate mode.
Blinking green The printer is warming up, processing data, or printing.
Solid green The printer is on, but idle.
Understanding the printer control panel 15
Indicator light Printer status
Blinking red The printer requires user intervention.
Sleep button light Printer status
Off The printer is off, idle or in Ready state.
Solid amber The printer is in Sleep mode.
Blinking amber The printer is entering or waking from Hibernate mode.
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern
The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Touch the home screen
buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen; or to respond to
messages.
Note: Your home screen may vary depending on your home screen customization settings, administrative setup, and
active embedded solutions.
6
1
12
11
10
7
8
2 3 4 5
9
13
14
Touch To
1 Change Language Launch the Change Language popup window that lets you change the primary language of
the printer.
2 Copy Access the Copy menus and make copies.
3 Fax Access the Fax menus and send fax.
4 E-mail Access the E-mail menus and send emails.
5 FTP Access the File Transfer Protocol (FTP) menus and scan documents directly to an FTP server.
6 Arrows Scroll up or down.
7 Forms and Favorites Quickly find and print frequently used online forms.
8 Menu icon Access the printer menus.
Note: The menus are available only when the printer is in Ready state.
Understanding the printer control panel 16
Touch To
9 Bookmarks Create, organize, and save a set of bookmarks (URL) into a tree view of folders and file links.
Note: The tree view supports only bookmarks created from this function, and not from any
other application.
10 USB Drive View, select, print, scan, or email photos and documents from a flash drive.
Note: This icon appears only when you return to the home screen while a memory card or
flash drive is connected to the printer.
11 Held Jobs Display all current held jobs.
12 Status/Supplies
Show a warning or error message whenever the printer requires intervention to continue
processing.
Access the messages screen for more information on the message, and how to clear it.
13 Tips Open a context-sensitive Help dialog.
14 Search Held Jobs Search for one or more of the following items:
User name for held or confidential print jobs
Job names for held jobs, excluding confidential print jobs
Profile names
Bookmark container or print job names
USB container or print job names for supported file types
Features
Feature Description
Menu trail line
Example:
Menus > Settings > Copy Settings >
Number of Copies
A menu trail line is located at the top of each menu screen. This feature shows the
path taken to arrive at the current menu.
Touch any of the underlined words to return to that menu.
Number of Copies is not underlined because it is the current screen. If you touch an
underlined word on the “Number of Copies” screen before the number of copies is
set and saved, then the selection is not saved, and it does not become the default
setting.
Attendance message alert
If an attendance message affects a function, then this icon appears and the red
indicator light blinks.
Warning
If an error condition occurs, then this icon appears.
Status message bar
Show the current printer status such as Ready or Busy.
Show printer conditions such as Toner Low or Cartridge Low.
Show intervention messages so the printer can continue processing.
Understanding the printer control panel 17
Feature Description
Printer IP address
Example:
123.123.123.123
The IP address of your network printer is located at the upper left corner of the
home screen and appears as four sets of numbers separated by periods. You can
use the IP address when accessing the Embedded Web Server so you can view and
remotely configure printer settings even when you are not physically near the
printer.

Using the touch-screen buttons

Note: Your home screen, icons, and buttons may vary, depending on your home screen customization settings,
administrative setup, and active embedded solutions.
7
6
3
4
1
5
2
Touch To
1 Arrows View a list of options.
2 Copy It Print a copy.
3 Advanced Options Select a copy option.
4 Home Go to the home screen.
5 Increase Select a higher value.
6 Decrease Select a lower value.
7 Tips Open a context-sensitive Help dialog.
Other touch-screen buttons
Touch To
Accept
Save a setting.
Understanding the printer control panel 18
Touch To
Cancel
Cancel an action or a selection.
Exit a screen and return to the previous screen without saving changes.
Reset
Reset values on the screen.
Understanding the printer control panel 19

Setting up and using the home screen applications

Notes:
Your home screen may vary depending on your home screen customization settings, administrative setup, and
active embedded applications.
There may be additional solutions and applications available for purchase. For more information, go to
www.lexmark.com or contact the place where you purchased the printer.

Finding the IP address of the printer

Note: Make sure your printer is connected to a network or to a print server.
You can find the printer IP address:
From the top left corner of the printer home screen.
From the TCP/IP section in the Network/Ports menu.
By printing a network setup page or menu settings page, and then finding the TCP/IP section.
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Finding the IP address of the computer

For Windows users
1 In the Run dialog box, type cmd to open the command prompt.
2 Type ipconfig, and then look for the IP address.
For Macintosh users
1 From System Preferences in the Apple menu, select Network.
2 Select your connection type, and then click Advanced > TCP/IP.
3 Look for the IP address.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even
when you are not physically near the printer.
1 Obtain the printer IP address:
From the printer control panel home screen
From the TCP/IP section in the Network/Ports menu
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
2 Open a Web browser, and then type the printer IP address in the address field.
Setting up and using the home screen applications 20
3 Press Enter.
Note: If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Customizing the home screen

1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 Do one or more of the following:
Show or hide the icons of basic printer functions.
a Click Settings > General Settings > Home screen customization.
b Select the check boxes to specify which icons appear on the home screen.
Note: If you clear a check box beside an icon, then the icon does not appear on the home screen.
c Click Submit.
Customize the icon for an application. For more information, see “Finding information about the home screen
applications” on page 22 or see the documentation that came with the application.

Understanding the different applications

Use To
Card Copy Scan and print both sides of a card on a single page. For more information, see
“Setting up Card Copy”
on page 23.
Fax Scan a document, and then send it to a fax number. For more information, see
“Faxing” on page
118.
Forms and Favorites Quickly find and print frequently used online forms directly from the printer home screen. For more
information, see
“Setting up Forms and Favorites” on page 22.
Multi Send Scan a document, and then send it to multiple destinations. For more information, see
“Setting up
Multi Send” on page 24.
MyShortcut Create shortcuts directly on the printer home screen. For more information, see
“Using MyShortcut”
on page 23.
Scan to Email Scan a document, and then send it to an email address. For more information, see
“E-mailing” on
page 111.
Scan to Computer Scan a document, and then save it to a predefined folder on a host computer. For more information,
see
“Setting up Scan to Computer” on page 147.
Scan to FTP Scan documents directly to a File Transfer Protocol (FTP) server. For more information, see
“Scanning
to an FTP address” on page 144.
Scan to Network Scan a document, and then send it to a network shared folder. For more information, see
“Setting
up Scan to Network” on page 24.
Setting up and using the home screen applications 21

Activating the home screen applications

Finding information about the home screen applications

Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first
activate and set up these applications using the Embedded Web Server. For more information on accessing the
Embedded Web Server, see
“Accessing the Embedded Web Server” on page 20.
For more information on configuring and using the home screen applications, do the following:
1 Go to http://support.lexmark.com.
2 Click Software Solutions, and then select either of the following:
Scan to Network—This lets you find information about the Scan to Network application.
Other Applications—This lets you find information about the other applications.
3 Click the Manuals tab, and then select the document for the home screen application.

Setting up Forms and Favorites

Note: A later version of this User's Guide may contain a direct link to the Administrator’s Guide of this application. To
check for updates of this User’s Guide, go to
http://support.lexmark.com.
Use To
Streamline work processes by letting you quickly find and print frequently used online forms directly
from the printer home screen.
Note: The printer must have permission to access the network folder, FTP site, or Web site where the
bookmark is stored. From the computer where the bookmark is stored, use sharing, security, and
firewall settings to allow the printer at least a read access. For help, see the documentation that
came with your operating system.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 Click Settings > Apps > Apps Management > Forms and Favorites.
3 Click Add, and then customize the settings.
Notes:
See the mouse-over help beside each field for a description of the setting.
To make sure the location settings of the bookmark are correct, type the correct IP address of the host
computer where the bookmark is located. For more information on obtaining the IP address of the host
computer, see
“Finding the IP address of the computer” on page 20.
Make sure the printer has access rights to the folder where the bookmark is located.
4 Click Apply.
To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form
categories, or search for forms based on a form number, name, or description.
Setting up and using the home screen applications 22

Setting up Card Copy

Note: A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To
check for updates of this User's Guide, go to
http://support.lexmark.com.
Use To
Quickly and easily copy insurance, identification, and other walletsize cards.
You can scan and print both sides of a card on a single page, saving paper and showing the information
on the card in a more convenient manner.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 Click Settings > Apps > Apps Management > Card Copy.
3 Change the default scanning options, if necessary.
Default tray—Select the default tray to be used for printing scan images.
Default number of copies—Specify the number of copies that should automatically print when the application
is used.
Default contrast setting—Specify a setting to increase or decrease the level of contrast when a copy of the
scanned card is printed. Select Best for Content if you want the printer to adjust the contrast automatically.
Default scale setting—Set the size of the scanned card when printed. The default setting is 100% (full size).
Resolution setting—Adjust the quality of the scanned card.
Notes:
When scanning a card, make sure the scan resolution is not more than 200 dpi for color, and 400 dpi for
black and white.
When scanning multiple cards, make sure the scan resolution is not more than 150 dpi for color, and
300 dpi for black and white.
Print Borders—Select the check box to print the scan image with a border around it.
4 Click Apply.
To use the application, touch Card Copy on the printer home screen, and then follow the instructions.

Using MyShortcut

Note: A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To
check for updates of this User's Guide, go to
http://support.lexmark.com.
Setting up and using the home screen applications 23
Use To
Create shortcuts on the printer home screen, with settings for up to 25 frequently used copy, fax, or e-
mail jobs.
To use the application, touch MyShortcut, and then follow the instructions on the printer display.

Setting up Multi Send

Note: A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To
check for updates of this User's Guide, go to
http://support.lexmark.com.
Use To
Scan a document, and then send the scanned document to multiple destinations.
Note: Make sure there is enough space in the printer hard disk.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
2 Click Settings > Apps > Apps Management > Multi Send.
3 From the Profiles section, click Add, and then customize the settings.
Notes:
See the mouseover help beside each field for a description of the setting.
If you select FTP or Share Folder as a destination, then make sure the location settings of the destination are
correct. Type the correct IP address of the host computer where the specified destination is located. For
more information on obtaining the IP address of the host computer, see
“Finding the IP address of the
computer” on page 20.
4 Click Apply.
To use the application, touch Multi Send on the printer home screen, and then follow the instructions on the printer
display.

Setting up Scan to Network

Note: A later version of this User's Guide may contain a direct link to the Administrator’s Guide of this application. To
check for updates of this User's Guide, go to
http://support.lexmark.com.
Setting up and using the home screen applications 24
Use To
Scan a document and send it to a shared network folder. You can define up to 30 unique folder
destinations.
Notes:
The printer must have permission to write to the destinations. From the computer where the
destination is specified, use sharing, security, and firewall settings to allow the printer at least a
write access. For help, see the documentation that came with your operating system.
The Scan to Network icon appears only when one or more destinations are defined.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 Do either of the following:
Click Set up Scan to Network > Click here.
Click Settings > Apps > Apps Management > Scan to Network.
3 Specify the destinations, and then customize the settings.
Notes:
See the mouse-over help beside some of the fields for a description of the setting.
To make sure the location settings of the destination are correct, type the correct IP address of the host
computer where the specified destination is located. For more information on obtaining the IP address of
the host computer, see
“Finding the IP address of the computer” on page 20.
Make sure the printer has access rights to the folder where the specified destination is located.
4 Click Apply.
To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the
printer display.

Setting up Remote Operator Panel

This application enables you to interact with the printer control panel even when you are not physically near the network
printer. From your computer, you can view the printer status, release held print jobs, create bookmarks, and do other
print-related tasks.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 Click Settings > Remote Operator Panel Settings.
3 Select the Enable check box, and then customize the settings.
4 Click Submit.
To use the application, click Remote Operator Panel > Launch VNC Applet.
Setting up and using the home screen applications 25

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 To export or import a configuration for one application, do the following:
a Click Settings > Apps > Apps Management.
b From the list of installed applications, click the name of the application you want to configure.
c Click Configure, and then do either of the following:
To export a configuration to a file, click Export, and then follow the instructions on the computer screen to
save the configuration file.
Notes:
When saving the configuration file, you can type a unique file name or use the default name.
If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration file is
saved.
To import a configuration from a file, click Import, and then browse to the saved configuration file that was
exported from a previously configured printer.
Notes:
Before importing the configuration file, you can choose to preview it first or load it directly.
If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.
3 To export or import a configuration for multiple applications, do the following:
a Click Settings > Import/Export.
b Do either of the following:
To export a configuration file, click Export Embedded Solutions Settings File, and then follow the instructions
on the computer screen to save the configuration file.
To import a configuration file, do the following:
1 Click Import Embedded Solutions Settings File > Choose File, and then browse to the saved configuration
file that was exported from a previously configured printer.
2 Click Submit.
Setting up and using the home screen applications 26

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.

Available internal options

Memory card
DDR3 DIMM
Flash memory
Fonts
Firmware cards
Forms barcode
PRESCRIBE
IPDS
Printcryption
Lexmark
TM
Internal Solutions Ports (ISP)
Parallel 1284-B interface
MarkNet
TM
N8350 802.11 b/g/n wireless printer server
MarkNet N8130 10/100 fiber interface
RS-232-C serial interface

Accessing the controller board

Note: This task requires a flathead screwdriver.
Additional printer setup 27
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
1 Open the controller board access cover.
2 Using a screwdriver, loosen the screws on the controller board shield.
Additional printer setup 28
3 Remove the shield.
2
1
4 Use the following illustration to locate the appropriate connector.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch a metal surface on the printer before touching any controller board electronic components or
connectors.
1
2
3
1 Lexmark Internal Solutions Port or printer hard disk connector
2 Option card connector
3 Memory card connector
Additional printer setup 29
5 Reattach the shield, and then align the screws with the holes.
1
2
6 Tighten the screws on the shield.
Additional printer setup 30
Loading...
+ 360 hidden pages