Lexmark 24B6015, 24B6025 User Manual
Supplies guide
Page 1 of 2
Supplies guide
To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web site at
you purchased the printer.
The Lexmark Return Program lets you purchase Lexmark supplies at a discounted price in exchange for your agreement to use
the supplies only once and return them only to Lexmark for remanufacturing or recycling.
Using genuine Lexmark parts and supplies
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts
may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can
affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life
indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies
or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated
components.
www.lexmark.com or contact the place where
Ordering a toner cartridge
Notes:
• The estimated cartridge yield is based on approximately 5% coverage per page.
• Extremely low print coverage for extended periods of time may negatively affect actual yield.
Item Return Program cartridge
Extra High Yield Toner Cartridge 24B6015
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name Lexmark Return Program
Imaging unit 24B6025
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
• Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front
of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
Supplies guide
Page 2 of 2
• The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be
individually ordered and replaced if necessary.
• For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with
each part.
Lexmark Return Program fuser maintenance kit type
Type Part number
XM5100 Series Return Program fuser maintenance kit Type 00 40X8420
XM5100 Series Return Program fuser maintenance kit Type 01 40X8421
XM5100 Series Return Program fuser maintenance kit Type 02 40X8422
XM5100 Series Return Program fuser maintenance kit Type 03 40X8423
XM5100 Series Return Program fuser maintenance kit Type 04 40X8424
Lexmark regular fuser maintenance kit type
Type Part number
XM5100 Series regular fuser maintenance kit Type 05 40X8425
XM5100 Series regular fuser maintenance kit Type 06 40X8426
XM5100 Series regular fuser maintenance kit Type 07 40X8427
XM5100 Series regular fuser maintenance kit Type 08 40X8428
XM5100 Series regular fuser maintenance kit Type 09 40X8429
Lexmark roller kit
Part number
XM5100 Series roller kit 40X7706
Lexmark ADF maintenance kit
Part number
XM5100 Series ADF maintenance kit 40X8431
Loading...