Level One IFP-0504 User Manual

IFP-0504 Version: 1

5-Port Fast Ethernet PoE Industrial Switch, 4 PoE Outputs, 802.3at/af PoE, 1 x ST Multi-Mode Fiber, 2km, 126W, -40°C to 75°C

The LevelOne IFP-0504 Industrial Fast Ethernet PoE+ Switch provides 4 ports at 10/100M TX PSE to supply power and internet to PoE+ compatible Powered Devices (PD) in a network setting. The multi-modal fibre IFP-0504 switch supplies 15.4 Watts for IEEE802.3af or 30 Watts (Max 36W) for IEEE802.3at per port, and is configured for large industrial or outdoor networks, with a maximum networking range of 2km. With an industrial-standard DIN-rail mount for easy cabinet deployment or wall mount for versatile network configurations, the IFP-0502 comes in a sturdy metal casing rated to IP30 for installation in industrial settings where humidity, dust, high or low operating temperatures or vibrations could cause standard devices to fail.

Key Features

Multi-mode fiber with ST connector for transmission of up to 2km

Provides flexibility of 4 x 10/100BASE-TX PoE ports

PoE ports can support the IEEE 802.3at standard and power up 30W devices

10/100Mbps, full/half-duplex, auto-negotiation, auto-MDI/MDIX

-40°C to 75°C operating temperature range

Provides DIN-rail, wall or desktop mounting

IP30 metal case

Redundant power inputs with Terminal Block

Specifications

System Specifications

Standards & Protocols:

IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE802.3x Flow Control and Back Pressure, IEEE802.3af for POE IEEE802.3at for POE+

Memory:

Buffer Memory:

www.level1.com Page 1 of 5

Connectors and Cabling:

4 x 10/100M TX PSE 1 x 10/100M ST MM 2km 1 x Terminal block

Indicator:

PW1 (Power 1) : Green / PW2 (Power 2) : Green / SW( Relay) : Amber LNK (RJ45) : Green / POE link : Amber SFP : Green (Link / Active)

Transmission Method:

Store-and-Forward

Power Input:

Dual DC 9V-56V Power Inputs provide power redundancy 9-56VDC Input : switch without PoE 44-56VDC Input: switch with PoE

Power Output:

Alarm Relay Output 1A @ 24VDC

Features

PoE:

Input Voltage 44VDC-56VDC. POE power per port 30watts. Maximum 36Watts with 56VDC input. Maximum total power 126Watts with 56VDC input

Performance

Backplane (Gbps):

MAC Address Table:

Data Transfer Rate:

10/100Mbps

Packet Forwarding Rate:

100Mbps port - 148,000pps 10Mbps port - 14,880pps

Environment

Temperature (°C):

Operating: - 40°C ~ 75°C Storage: - 40°C ~ 85°C

Humidity (Non-condensing):

Storage: 5% ~ 95% Operating: 5% ~ 95%

Deployment:

Desk, din rail, wall mount

Physical Specifications

Dimensions (W x D x H mm):

36.2 x 105 x 142 mm

Weight (g):

460 g

www.level1.com Page 2 of 5

+ 3 hidden pages