Page 1
GE +
Quick Installation Guide
40 to 75C
Overview
LED Status
LED Status
(T1 ~ T5)
Flashing
Flashing
Description
established
Transmitting or Receiving data
1000M speed is established
10M or 100M speed is established
Network connection established
Transmitting or Receiving data
connection established
No connection is being established
LevelOne IES-0620 Industry Ethernet Switch provides 4 PoE
ports of 10/100/1000Base-T plus 1 ports of 10/100/1000Base-T
Ethernet plus 2 ports of Gigabit SFP to enable high speed
network at mission-critical environment. The compact metal
housing is designed for desktop space saving, plus the clearly
visible status LEDs provide simple monitoring of port link
activity. Moreover, the SFP slots support pluggable modules
that enabling you to choose from a variety of transceivers.
4 x 802.3at +
IES-0620
2 SFP Unmanaged Switch -
v1.00 - 1401
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including
Electric & Utility, Critical Infrastructure, Transportation and
Surveillance Security. This device operates under -40 to 75
Celsius (-40 to 167 Fahrenheit) temperature.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of
instant connectivity with no setup or configure required, truly
plug and play.
Power over Ethernet
This switch is Power Sourcing Equipment (PSE), and it is fully
complied with IEEE 802.3at PoE standard at maximum 30W
power budget per port. It helps to save infrastructure wiring
costs dramatically by eliminating electric wiring and less UPS
needed. Also, it is compatible with IEEE802.3af standard PD
devices.
IES-0620 Page 1
Features
• Meets NEMA TS1/TS2 Environmental requirements such as temperature,
shock, and vibration for traffic control equipment
• Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for
industrial environment
• Supports 1024 MAC addresses. Provides 1M bits memory buffer
• Supports IEEE802.3af PoE 15.4W and IEEE802.3at PoE+ 30W
• Provides one combo Gigabit ports. SFP socket for Gigabit fibre optic
expansion.
• Store-and-forward mechanism. Full wire-speed forwarding rate.
• Power Supply: 47~57VDC Terminal Block power input.
• 5.52W power consumption 48VDC @ 0.12A (unit only)
• -40℃ to 75℃ (-40℉ to 167℉) operating temperature range.
• Tested for functional operation @ -40℃ to 85℃ (-40℉ to 185℉).
• Hardened metal case
Package Contents
IES-0620
Quick Installation Guide
PWR 1, 2
P1 ~ P4
10/100/1000Base-TX
LNK
SPD
1000Base-SFP
F5
F6
Steady
Off
Steady
Off
Steady
Steady
Off
Steady
Steady
Off
Power On
Power Off
PD is connected
No PD is connected
Network connection
A valid
IES-0620 Page 2
IES-0620
Page 3
Page 2
Power Input
Relay Output
+
47 – 57
VDC
–
+
–
DIP Switch
T5 (RJ45) enabled
F5 (SFP) enabled
Port5 (T5 & F5) is shared combo port
RJ45 or SFP via DIP1 switch
DIP1 DIP1
1000M
100M
, enable either
DIN Rail Mount
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the
surface until it audibly snaps into place
up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail.
mounting
10/100/1000Base
he following lists the
Pin 10/100 DC & Data
Rx + DC +
x + DC
TX Pin
-
1000
DC & Bi
TxRx A + DC +
TxRx B + DC
-
Data
Terminal Block
IES-0620
PW1
PW2
Power Ground
47 – 57VDC
Power Ground
1A @ 24VDC
Page 4
OFF
Note:
IES-0620
ON
Page 5
•
•
Start-
•
T
1
Rx -
2
T
3
unused
4
5
unused
6
Tx -
7
unused
8
unused
pin-out of 10/100/1000Base
DC + TxRx A -
-
DC - TxRx B -
-
TxRx C +
TxRx C -
TxRx D +
TxRx D -
TX ports
DC +
-
DC -
IES-0620
Page 6
IES-0620
Page 7
Loading...