LevelOne IES-0600 Quick Installation Manual
4
TX + 1 Switch SFP + 1Combo
Quick Installation Guide
IES-0600
-
40 to 75C
v1.00 - 1401
IES-0600 Page 1
Overview
LevelOne IES-0600 Industry Ethernet Switch provides 4 ports
of 10/100/1000Base-T Ethernet plus 2 ports of Gigabit SFP to
enable high speed network at mission-critical environment. The
compact metal housing is designed for desktop space saving,
plus the clearly visible status LEDs provide simple monitoring of
port link activity. Moreover, the SFP slots support pluggable
modules that enabling you to choose from a variety of
transceivers.
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including
Electric & Utility, Critical Infrastructure, Transportation and
Surveillance Security. This device operates under -40 to 75
Celsius (-40 to 167 Fahrenheit) temperature.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of
instant connectivity with no setup or configure required, truly
plug and play.
IES-0600 Page 2
Features
• Meets NEMA TS1/TS2 Environmental requirements such as temperature,
shock, and vibration for traffic control equipment
• Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for
industrial environment
• Supports 1024 MAC addresses. Provides 1M bits memory buffer
• Provides one combo Gigabit ports. SFP socket for Gigabit fibre optic
expansion.
• Store-and-forward mechanism. Full wire-speed forwarding rate.
• Power Supply: 12~55VDC Terminal Block power input.
• 5.52W power consumption 48VDC @ 0.12A (unit only)
• -40℃ to 75℃ (-40℉ to 167℉) operating temperature range.
• Tested for functional operation @ -40℃ to 85℃ (-40℉ to 185℉).
• Hardened metal case
Package Contents
IES-0600
Quick Installation Guide
IES-0600
LED Status
LED Status
PWR 1, 2
Steady
Off
P1 ~ P4
Steady
Off
10/100/1000Base-TX
(T1 ~ T5)
LNK
Steady
Flashing
SPD
Steady
Off
1000Base-SFP
F5
Steady
Flashing
F6
Steady
Off
Description
Power On
Power Off
PD is connected
No PD is connected
Network connection established
Transmitting or Receiving data
1000M speed is established
10M or 100M speed is established
Network connection established
Transmitting or Receiving data
A valid
connection established
No connection is being established
Page 3
IES-0600
Power Input
Terminal Block
PW1
PW2
Relay Output
+
12 – 55
VDC
–
Power Ground
+
12 – 55VDC
–
Power Ground
1A @ 24VDC
Page 4
IES-0600
DIP Switch
OFF
T5 (RJ45) enabled
ON
F5 (SFP) enabled
Note:
Port5 (T5 & F5) is shared combo port
RJ45 or SFP via DIP1 switch
DIP1 DIP1
1000M
100M
, enable either
Page 5
IES-0600
DIN Rail Mount
•
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
surface until it audibly snaps into place
•
Start-
up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
•
Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail.
Page 6
IES-0600
10/100/1000Base
The following lists the
Pin 10/100 DC & Data
1
Rx + DC +
2
Rx -
3
T
x + DC
4
unused
5
unused
6
Tx -
7
unused
8
unused
-
TX Pin
pin-out of 10/100/1000Base
-
1000
DC & Bi
TxRx A + DC +
DC + TxRx A -
-
TxRx B + DC
TxRx C +
TxRx C -
DC - TxRx B -
TxRx D +
TxRx D -
Page 7
TX ports
-
Data
DC +
-
DC -
Loading...