Level One GTP-2871 User Manual

GTP-2871 Version: 1
28-Port L3 Lite Managed Gigabit PoE Switch, 4 x 10GbE SFP+, 24 PoE Outputs, 400W
The GTP-2871 is LevelOne latest generation of 28-Port L3 Lite Managed Gigabit PoE Switch, with 4 10G SFP+ port connectivity. offers powerful L2 and L3 Lite features, better PoE functionality with 400W PoE power budget and usability, The switch also supports the most advanced IPv6 management,IPv6 security, and IPv6 multicast control in accordance with the growth of IPv6 deployment.
The GTP-2871 PoE-enabled switches features an IEEE 802.3af/at certified. are ideal for businesses looking to power VoIP phones, wireless access points or network cameras. The GTP-2871 24-port PoE Switch supports up to 30 W of power output giving you flexibility in power allocation for a variety of powered devices enabling you to scale your operations to meet business growth, operational cost savings, and ease of management.
Key Features
24 Gigabit PoE ports and 4 10-Gigabit SFP+ slots
­IEEE 802.3af/at PoE compliant to simplify deployment and installation
­Total PoE power budget: 400W, up to 30W per port
­Virtual stacking supports up to 4 switches in a single logical stack for unified management, monitoring
­and configuration Supports port-based VLAN, IEEE 802.1Q VLAN Tagging and GVRP
­IEEE 802.1d/w/s Spanning Tree Protocol (STP) and port mirroring
­Supports IPv4/IPv6 network operation
­Supports unknown unicast / broadcast / multicast storm control
­IP Multicast Filtering through IGMP Snooping V1 / V2 / V3
­Dynamic ARP Inspection (DAI) protects switches against ARP spoofing
-
Specifications
System Specifications
Standards:
IEEE 802.3 100BASE-FX IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers IEEE 802.3x for full-duplex mode IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.1Q VLAN IEEE 802.1v protocol-based VLAN IEEE 802.3ad Link Aggregation Control Protocol IEEE 802.1p Quality of Service (QoS) IEEE 802.1X port based and MAC based authentication
www.level1.com Page 1 of 6
IEEE 802.3az Energy-Efficient Ethernet (EEE)
IEEE 802.3ah Ethernet Link OAM IEEE 802.1ag Connectivity Fault Management IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE+) IEEE 802.3az Energy-Efficient Ethernet IEEE 802.3 10-BASE-T, Ethernet IEEE 802.3u 100-BASE-TX, Fast Ethernet IEEE 802.3ab 1000BASE-T, Gigabit Ethernet IEEE 802.3ac VLAN tag
Protocols:
Link Layer Discovery Protocol (LLDP) Universal Plug and Play (UPnP)
Memory:
RAM: 512MB Flash: 32MB
Buffer Memory:
Packet Buffer: 1.5Mbits
Port:
24 x RJ-45 10/100/1000BASE-T ports 4 x 10G SFP 1 x RJ45 Console port
Button/Knob:
1 x Reset Button
Indicator:
System, Link/Act/Speed, PoE
Pin Assignment and Polarity:
1/2(+),3/6(-)
Transmission Method:
Store-and-Forward
Power Input:
100-240VAC, 50-60Hz, Maximum: 6 A
Power Consumption:
468.2W
MAC Address Table:
16K
Data Rate:
10/100/1000Mbps 1000/10000Mbps SFP+
Operating Temperature (°C):
0°C to 45°C
Operating Humidity (Non-condensing):
10% to 90%
Storage Temperature (°C):
-40°C to 70°C
Storage Humidity (Non-condensing):
5% to 95%
Mount:
19" rack mount / Desk mount
www.level1.com Page 2 of 6
Loading...
+ 4 hidden pages