Level One GEP-1070 User Manual

GEP-1070 Version: 1

10-Port L2 Managed Gigabit PoE Switch,

802.3af/at PoE, 2 x SFP, 120W

The LevelOne GEP-1070 is 10-port Gigabit Layer-2 Managed PoE+ Switch, is a standard Gigabit Ethernet
switch that meets all IEEE IEEE 802.3/u/x/z/ab/af/at standards. The switch includes 8-Port
10/100/1000Mbps RJ-45 with PoE+ function and 2-Port Gigabit SFP for Fiber. It is an ideal solution for
applications of wireless AP, IP phones, IP cameras, and IP HDMI TV-Wall of digital signage. It can be
managed through Ethernet port using Web-based management, associated with SNMP agent. With the
SNMP agent, the network administrator can manage the switch, configure and control in an efficient way.
The overall network management is enhanced to meet the network efficiency and to accommodate high
bandwidth applications.
In addition, the switch features comprehensive and useful functions such as DHCP Snooping (Including
Option 82), QoS (Quality of Service), Spanning Tree, RSTP/MSTP, VLAN, Port Trunking, Port Security,
MVR, SNMP/RMON, LLDP and IGMPv3 Snooping capability. GEP-1070 supports the Power saving by
reducing the power consumption. It could efficiently save the switch power with auto detecting the client idle
and cable length to provide different power.

Key Features

8 PoE-Plus Gigabit Ethernet ports and 2 Gigabit SFP slots

­Supports VLAN (tag-based, Q-in-Q)

­Supports 8K MAC address auto-learning and auto-aging

­IEEE 802.3ad LACP for auto port aggregation

­9K jumbo frames to increase data transfer rates

­Total PoE power budget: 120W, up to 30W per port

-

Specifications

System Specifications

Standards & Protocols:

IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.3ab 1000BASE-T, Gigabit Ethernet
IEEE 802.3z 1000BASE-X,Gigabit Ethernet
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1Q Virtual LANs (VLANs)
IEEE 802.1D MAC Bridges
IEEE 802.1d Standard Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree (MSTP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.3x Flow Control
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)

www.level1.com Page 1 of 4

IEEE 802.3az Energy-Efficient Ethernet

Link Layer Discovery Protocol (LLDP)
Universal Plug and Play (UPnP)

Memory:

16MB

Buffer Memory:

4Mbits

Connectors and Cabling:

8x RJ-45 10/100/1000BASE-T PoE ports
2 x 100/1000Base-X SFP Slots

Button/Knob:

Reset Button

Indicator:

Power, Link/Active

Transmission Method:

Store-and-Forward

Power Input:

100-240V AC, 50-60 Hz, Internal Power Supply

Features

General:

Eight integrated IEEE 802.3ab-compliant
10/100/1000Bast-T Ethernet copper transceivers with VeriPHYTM cable diagnostics
Advanced Access and QoS Control Lists (ACL and QCL ) support
Integrated temperature monitoring curcuit
IGMP v1/v2/v3 snooping
VLAN: private VLAN, voice VLAN, MAC-based, protocol-based, 802.1Q tag-based VLAN (up to 4k VLANs)

Layer 2 Switching :
10-port Gigabit Ehternet switch with nonblocking wire-speed performance
Link addregation (IEEE 802.3ad, 4 trunk groups) with programmable traffic distribution based on Layer 2
through Layer 4 information
Wire-speed Hardware-based learning and CPU-based learning configurable per port
Independent and shared VLAN learning
Jumbo frame support up to 9.6 Kilobytes per-port programmable MTU
Q-in-Q tagging support

QoS :
Eight QoS queues per port with strict or deficit-weighted round robin scheduling
QoS classification based on IEEE 802.1p, EtherType, VID, MAC/IP addresses, IPv4/IPv6 DSCP, and
UDP/TCP port and ranges
Data rate shaper and policer per-queue, per-port for both ingress and egess directions
Full-duplex flow control (IEEE 802.3x) and half-duplex backpressure, symmetric and asymmetric
Multicast and broadcast storm control with flooding control

PoE:

Power Budget: Max. 120W
Support IEEE 802.3af (15.4 W)/IEEE802.3at (30W) on each port
Pin Assignment: 1/2(+), 3/6(-)
Dynamic Power Allocation
Auto disable after exceeding power budget
PoE Timer
PoE Auto Checking
PoE-PSE activity LED indicator
Supports per port PoE state setting
Auto detect powered device and consumption monitoring
Supports per port power budget
Smart feature for PD Enable/Disable, PD detection, power level
Circuit protection to prevent power interference between ports

www.level1.com Page 2 of 4

Supports per port power priority setting