Page 1
GEP-1061 Version: 1
10-Port L2 Managed Gigabit PoE Switch, 2 x SFP,
802.3at PoE+, 125W
The GEP-1061 is a L2 managed switches designed for the SMB market. The switches can be deployed
indifferent target network topologies, from small to large. The GEP-1061 is a full-PoE fanless design switch,
it supportsup to 8 ports at 15.4 W, or 4 ports at 30 W to meet the increasing power demands of users.As
well as IPv4 and IPv6 features. The GEP-1061 includes the best green-saving technologies(IEEE 802.3az
and Green-Ethernet). Using the Energy Efficient Ethernet standard, the switch automatically
decreasespower usage when network traffic is low.
Key Features
8 PoE-Plus Gigabit Ethernet ports and 2 Gigabit SFP slots
IEEE 802.1d/w/s Spanning Tree Protocol (STP) and port mirroring
IEEE 802.3ad LACP for auto port aggregation
Supports Access Control List (ACL) authentication of up to 512 entries and port-based security with
IEEE802.1X
IP Multicast Filtering through IGMP Snooping V1 / V2 / V3
Supports port-based VLAN, IEEE 802.1Q VLAN Tagging
Supports IPv4/IPv6 network operation
IEEE 802.1p QoS with 8 priority queues
Total PoE power budget: 125W, up to 30W per port
-
Specifications
System Specifications
Standards & Protocols:
IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.3ab 1000BASE-T, Gigabit Ethernet
IEEE 802.3z 1000BASE-X,Gigabit Ethernet
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1Q Virtual LANs (VLANs)
IEEE 802.1D MAC Bridges
IEEE 802.1d Standard Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree (MSTP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.3x Flow Control
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
IEEE 802.3az Energy-Efficient Ethernet
Link Layer Discovery Protocol (LLDP)
www.level1.com Page 1 of 4
Universal Plug and Play (UPnP)
Page 2
Memory:
32MB
Buffer Memory:
4.1Mbits
Connectors and Cabling:
8x RJ-45 10/100/1000BASE-T PoE ports
2 x 100/1000Base-X SFP Slots
Button/Knob:
Reset / Factory Default Button
Indicator:
Power; Link/Active
Transmission Method:
Store-and-Forward
Power Input:
100-240V AC, 50-60 Hz, Internal Power Supply
Power Consumption:
< 80W
Features
General:
Quality of Service (QoS):
8 hardware Priority Queues per port
Traffic classification based on IEEE 802.1p CoS
IPv4/IPv6 precedence/ type of service (ToS) / DSCP based
Rate Limiting - Ingress policer egress shaping and rate control
Spanning Tree:
Bridge Protocol Data Units (BPDU)
IEEE 802.1D MAC Bridges
IEEE 802.1d Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Virtual Local Area Network (VLAN):
802.1Q tag-based VLAN - up to 4K VLANs and 4K VLAN IDs
Port-based VLAN
MAC-based VLAN
DHCP: DHCP Client, DHCP Relay (Layer 2)
IPv6: IPv6 Ping / Trace /Telnet / Syslog / TFTP
IGMP: IGMP v1/v2/v3 snooping, IGMP Queried, IGMP Filtering / Throtting
Port Mirroring: One to One / One to Many
IEEE 802.3ad LACP Trunk (8 Trunks)
PoE:
Power Budget: Max. 125W
Support IEEE 802.3af (15.4 W)/IEEE802.3at (30W) on each port
Pin Assignment: 1/2(+), 3/6(-)
Dynamic Power Allocation
Auto disable after exceeding power budget
PoE Timer
Security:
DDOS Protection
CPU Guard
Port Isolation
Port Mirror /Remote Mirror
Broadcast / Multicast / Unknown Storm Control
www.level1.com Page 2 of 4
802.1X
Page 3
ACL
Port Security
MAC Filter / MAC Authentication
AAA
IP Source Guard
SSH
Management:
System Password protection
NTP/SNTP
Dual Image /Configuration
Firmware upgrade /download (HTTP/TFTP/FTP)
RMON/ SNMP
Management Access ( Console / SNMP/ Web / Telent )
Memory Flash Log
Event /Error Log
DHCP v4/v6 Snooping
DHCP Snooping Option82
Ease of Use:
Dashboard
Performance
Backplane (Gbps):
20Gbps
MAC Address Table:
8K
Data Transfer Rate:
10/100/1000Mbps
Packet Forwarding Rate:
14.9 Mpps
Jumbo Frame (K):
10K
Environment
Power Saving:
IEEE 802.3az Energy Efficient Ethernet:
- Automatically turns power off on RJ-45 port when detecting link down or Idle of client
- Cable length detection: Adjusts the signal strength based on the cable length
- Reduces the power consumption for cables shorter
Acoustic Noise:
0 dB (A)
Heat Dissipation:
545.933 (Btu/H)
Temperature (°C):
0-40 C
Humidity (Non-condensing):
10-90%
Deployment:
desktop & 19-inch rack-mountable
Physical Specifications
www.level1.com Page 3 of 4
Page 4
Dimensions (W x D x H mm):
330x204x43mm
Weight (g):
Gross: 4600g
Net: 2400g
Reliability
MTBF:
25 degreeC: 1296413 hrs
45 degreeC: 865820 hrs
Approval and Compliance
EMI/EMS:
CE classA, FCC, UL, VCCI, BSMI
Order Information
GEP-1061
Package Contents
GEP-1061
Power Cord
19" Rackmount Kit
Quick Installation Guide
Resource CD (User Manual)
Console Cable
Powered by TCPDF (www.tcpdf.org)
No liability or responsibility for any errors or omissions in the content.
Specifications are subject to change without notice.
All mentioned brand names are registered trademarks and property of their owners.
Copyright © Digital Data Communications GmbH, Germany. All Rights Reserved.
www.level1.com Page 4 of 4
Loading...