Level One GEP-1020 User Manual

GEP-1020 Version: 1

10-Port Gigabit PoE Switch, 802.3af/at PoE, 2 x
SFP, 8 PoE Outputs, 150W

LevelOne GEP-1020 provides 8 x 10/100/1000Base-T PoE-Plus ports and 2 x 1000Base-X SFP (Small
Form Factor Pluggable) slots. This switch is IEEE 802.3af/at compliant, providing power and data over a
single Ethernet cable to any PoE device, with total power budget of 150W, up to 30W per port. Together
with Energy Efficient Ethernet (IEEE 802.3az) standard compliant, it substantially lower power consumption
during periods of low-link utilization. Moreover, supports Gigabit Ethernet connectivity with 9K jumbo frames
for network performing enhancement. Ideal for small businesses that prefers an affordable solution for PoE
deploying infrastructure.

Key Features

8 PoE-Plus Gigabit Ethernet ports and 2 Gigabit SFP slots

­1000Mbps full-duplex, 10/100Mbps full/half-duplex, auto-negotiation, auto-MDI/MDIX

­IEEE 802.3af/at PoE compliant to simplify deployment and installation

­9K jumbo frames to increase data transfer rates

­Supports 8K MAC address auto-learning and auto-aging

­Auto-detection and protection of non-standard PoE devices

­IEEE 802.3x Flow Control protects against lost packets for reliable data transmission

­Minimize carbon footprint with advanced energy efficient technology (IEEE 802.3az)

­19-inch rackmount kit included

­Total PoE power budget: 150W, up to 30W per port

-

www.level1.com Page 1 of 4

Highlight

Eco-Conscious Design

LevelOne is always committed to providing significant energy savings products. With the implementation of
the advanced energy efficiency technology (IEEE 802.3az), allowing for monitoring the link status of each
port. Therefore reducing power consumption if a connected device is not active at a certain period of time.
In this way, the power can be saved and utilized more effectively.

Specifications

System Specifications

Standards & Protocols:

IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.3ab 1000BASE-T, Gigabit Ethernet
IEEE 802.3x Flow Control (full-duplex flow control)
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
IEEE 802.3az Energy-Efficient Ethernet

Buffer Memory:

512KB

Connectors and Cabling:

- 8 x 10/100/1000Base-T RJ-45 PoE-Plus Ports

- 2 x 100/1000Base-X SFP Slots

Indicator:

Power; Link/Active; PoE

Transmission Method:

Store-and-Forward

Power Input:

100-240V AC, 50-60 Hz, Internal Power Supply

Power Consumption:

< 150W

Features

General:

Flow Control: Half Duplex - Backpressure; Full Duplex - Pause frame

PoE:

Power Budget: Max. 140W
Power Output: Up to 30W per port
Protection: Circuit protection to prevent power interference between ports
Pin Assignment: 1/2(+), 3/6(-)

Performance

Backplane (Gbps):

16Gbps

MAC Address Table:

8K

Data Transfer Rate:

10/100/1000Mbps

Packet Forwarding Rate:

1000Mbps port - 1,488,000pps
100Mbps port - 148,000pps
10Mbps port - 14,880pps

www.level1.com Page 2 of 4