Level One GEL-5261 User Manual

GEL-5261 Version: 1
KILBY 52-Port L2 Managed Gigabit Switch, 4 x SFP
The LevelOne GEL-5261 is an intelligent L2 Managed Gigabit Switch with 48 RJ45 ports and 4 SFP fiber slots, designed for enterprise or large workgroups connectivity applications with the non-blocking, wire­speed switching performance and advanced networking management functions.
The switch supports a flexible web-based management interface for both IPv4 and IPv6 as well as console, SNMP and Telnet management access. Despite its affordable pricing, the GEL-5261 is equipped with many advanced features such as Internet Group Management Protocol (IGMP) snooping, port-/MAC-/tag-based VLAN, IEEE 802.1D/w/s Spanning Tree, Access Control List (ACL), IEEE 802.3az Energy Efficient Ethernet, Link Aggregation Control Protocol (LACP), IEEE 802.1p QoS, Storm Control for protecting against broadcast/multicast/unknown unicast and much more.
An ideal network solution for anyone looking for an affordable and efficient way to expand their network.
Key Features
48 Gigabit Ethernet ports and 4 Gigabit SFP slots
­IEEE 802.1d/w/s Spanning Tree Protocol (STP) and port mirroring
­IEEE 802.3ad LACP for auto port aggregation
­Supports Access Control List (ACL) authentication of up to 512 entries and port-based security with
­IEEE802.1X IP Multicast Filtering through IGMP Snooping V1 / V2 / V3
­Supports port-based VLAN, IEEE 802.1Q VLAN Tagging
­Supports IPv4/IPv6 network operation
­IEEE 802.1p QoS with 8 priority queues
­Virtual stacking supports up to 36 switches in a single logical stack for unified management, monitoring
­and configuration
Specifications
System Specifications
Standards:
IEEE 802.3 10-BASE-T, Ethernet IEEE 802.3u 100-BASE-TX, Fast Ethernet IEEE 802.3ab 1000BASE-T, Gigabit Ethernet IEEE 802.3z 1000BASE-X,Gigabit Ethernet IEEE 802.1p Quality of Service (QoS) IEEE 802.1Q Virtual LANs (VLANs) IEEE 802.1D MAC Bridges IEEE 802.1d Standard Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree (MSTP)
www.level1.com Page 1 of 4
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.3x Flow Control IEEE 802.3az Energy-Efficient Ethernet
Protocols:
Link Layer Discovery Protocol (LLDP) Universal Plug and Play (UPnP)
Memory:
32MB
Buffer Memory:
12Mbits
Port:
48x RJ-45 10/100/1000BASE-T ports 4 x 100/1000Base-X SFP Slots
Button/Knob:
Reset / Factory Default Button
Indicator:
Power; Link/Active
Transmission Method:
Store-and-Forward
Power Input:
Power Input: 100-240V AC, 50-60 Hz, Internal Power Supply
Power Consumption:
20W
Backplane (Gbps):
104Gbps
MAC Address Table:
16K
Data Rate:
10/100/1000Mbps
Acoustic Noise:
54.2 dB (A)
Power Saving:
IEEE 802.3az Energy Efficient Ethernet:
- Automatically turns power off on RJ-45 port when detecting link down or Idle of client
- Cable length detection: Adjusts the signal strength based on the cable length
- Reduces the power consumption for cables shorter
Heat Dissipation:
136.48 (Btu/H)
Operating Temperature (°C):
0-50°C
Operating Humidity (Non-condensing):
10-90%
Mount:
desktop & 19-inch rack-mountable
Features
General:
Quality of Service (QoS): 8 hardware Priority Queues per port Traffic classification based on IEEE 802.1p CoS IPv4/IPv6 precedence/ type of service (ToS) / DSCP based Rate Limiting - Ingress policer egress shaping and rate control Spanning Tree:
www.level1.com Page 2 of 4
Bridge Protocol Data Units (BPDU)
Loading...
+ 2 hidden pages