Level One FNC-0104FX User Manual

FNC-0104FX Version: 4
Fast Ethernet Fiber PCI Network Card, 1 x SC Multi-Mode Fiber
The LevelOne FNC-0104 network card offers a broad feature set with high performance at a great price. The card has a Wake-on-LAN feature offering remote start-up and shutdown, two SC (multimode) jacks for TX/RX, and clearly visible diagnostic LEDs showing link, activity, collision and FDX. The network card also supports all current operating systems, including Linux
Key Features
Built-in Wake-on-LAN feature to startup/shutdown computers remotely
Specifications
System Specifications
Standards & Protocols:
IEEE 802.3u 100-BASE-TX, Fast Ethernet IEEE 802.3ah 100Base-LX10 / -BX10 ethernet IEEE 802.3x Flow Control (full-duplex flow control) IEEE 802.1p Quality of Service (QoS) IEEE 802.1Q Virtual LANs (VLANs)
www.level1.com Page 1 of 3
Port:
SC Multi-Mode Fiber Connector
Bus Interface:
32-bit 33/66Mhz PCI Rev.2.1
Indicator:
Link, FDX, Col, Activity
Power Input:
2W
Data Transfer Rate:
100Mbps fast ethernet ,Full duplex or half-duplex,reach 200Mbps in full duplex
Features
General:
Both full-height and low profile for small form factors Support PXE Boot Rom Supports 32-bit PCI 2.2 buses support IP Unicast broadcast and multicast address filtering mechanism support GVRP VLAN registration protocol suppport TCP/IP, CPU Task Offload reduces host CPU use
Management:
Support DMI 2.0 and ACPI 1.0
Performance
Operating Distance:
Half-duplex Class II: Hub Node to Node 205 m Node to Hub 100 m Hub to Hub 5 m Half-duplex Switching: Hub Node to Node 412 m Node to Hub 412 m Hub to Hub 412 m Full-duplex Switching: Hub Node to Node 2 km Node to Hub 2 km Hub to Hub 2 km
Environment
Temperature (°C):
Operating: 0°C ~ 50°C Storage: 5°C ~ 55°C
Humidity (Non-condensing):
Operating: 5% ~ 95%
Physical Specifications
Dimensions (W x D x H mm):
120 x 53 X 17mm
Weight (g):
53 g
www.level1.com Page 2 of 3
Loading...
+ 1 hidden pages