LevelOne FCS-0071 User Manual
FCS-0071 User’s Manual
FCS-0071
2-Megapixel Fish-Eye PoE Network Camera
User’s Manual
Version: 1.0
Date: 05/30/2012
FCS-0071 User’s Manual
1
Contents
General Public License ................................................................................................................................... 2
Notices ........................................................................................................................................................... 3
Introduction ................................................................................................................................................... 4
Installation ..................................................................................................................................................... 5
FCS-0071 – Physical Overview ....................................................................................................... 5
Terminal block for I/O connectors ................................................................................................. 6
Using the Web UI ......................................................................................................................................... 15
1. Live View .......................................................................................................................................... 16
2. Video ................................................................................................................................................ 19
General ......................................................................................................................................... 19
Advanced ..................................................................................................................................... 22
3. Camera ............................................................................................................................................. 23
General ......................................................................................................................................... 23
Advanced ..................................................................................................................................... 25
4. Event ................................................................................................................................................ 30
Event Server ................................................................................................................................. 30
Motion Detection ......................................................................................................................... 31
I/O Ports ....................................................................................................................................... 33
Event Configuration ..................................................................................................................... 34
5. Schedule ........................................................................................................................................... 36
General ......................................................................................................................................... 36
Storage ......................................................................................................................................... 37
6. Network ........................................................................................................................................... 38
General ......................................................................................................................................... 38
Advanced ..................................................................................................................................... 39
SMTP (E-Mail) .............................................................................................................................. 40
DDNS ............................................................................................................................................ 41
7. System .............................................................................................................................................. 42
Information .................................................................................................................................. 42
User .............................................................................................................................................. 43
Date & Time ................................................................................................................................. 44
Server Maintenance ..................................................................................................................... 45
Log Service ................................................................................................................................... 46
8. Customize ......................................................................................................................................... 47
FAQ ............................................................................................................................................................... 49
Restore Factory Default ....................................................................................................................... 49
Upgrade Device Firmware ................................................................................................................... 49
1
FCS-0071 User’s Manual
2
IP Address
DHCP
Username
root
Password
Null (without password)
General Public License
This product incorporates open source code into the software and therefore falls under the
guidelines governed by the General Public License (GPL) agreement.
Adhering to the GPL requirements, the open source code and open source license for the source
code are available for free download at http://global.level1.com.
If you would like a copy of the GPL or other open source code in this software on a physical CD
medium, LevelOne (Digital Data Communications) offers to mail this CD to you upon request, for
a price of US$9.99 plus the cost of shipping.
Default Settings
2
FCS-0071 User’s Manual
3
Notices
This user manual is intended for administrators and users of the FCS-0071 Network Camera, including
instructions for using and managing the camera on your network. The use of surveillance devices may
be prohibited by law in your country. It is the user’s responsibility to ensure that the operation of such
devices is legal before installing this unit for its intended use.
Before the Network Camera is installed, all the safety and operating instructions should be carefully
read and followed to avoid damage due to faulty assembly and installation. This also ensures the
product is used properly as intended.
Heed all warnings
Do not drop or strike this equipment
Sensitive electronics inside the camera are vulnerable to excessive strike.
Do not install the equipment near any flames or heat sources
Excessive heat could damage this equipment.
Do not cover cloth or to install this equipment in poorly ventilated places.
Overheating could damage this equipment.
Do not expose this equipment to rain or moisture. Do not touch the power connection with
wet hands
Risk of short circuit, electric shock or fire
Do not damage the power cord or leave it under pressure
Risk of fire or shock circuit
To reduce the risk of electric shock, do not remove the Cover (or Back).
No user-serviceable parts inside. Misusage, improper, and negligence could damage this
equipment. Need to refer servicing to qualified service personnel.
Do not continue to operate if there appears to be fault.
If the unit ceases to function, contact qualified service personnel for help.
All work related to the installation of this product should be made by qualified service
personnel or system installers.
3
FCS-0071 User’s Manual
4
Introduction
FCS-0071 is a 2 Mega Pixel Fish-Eye Panorama Network Camera with H.264-AVC performance and other
rich functions. FCS-0071 is equipped with a fish-eye lens for 360° panoramic wide angle view without
blind spots making it the perfect solution for viewing wide areas with like hallways, stores, and offices
without the need to install multiple cameras.
H.264-AVC video compression lowers bandwidth and storage requirements without compromising image
quality; Motion JPEG is supported for increased flexibility, as well as multiple independent video
streaming. The hardware based panorama video processing ability can provide user multiple video
modes including source image, double broad view, triple mode view and quad view.
The e-PTZ function, including preset point without moving parts, can replace part of traditional PTZ
camera and thus save lost of traditional mechanical Pan/Tilt maintain cost.
The camera features PoE (Power-over-Ethernet) capability, providing easy installation through a single
Ethernet cable, eliminating the need for additional power cables and outlets. Other functions include
two-way audio and micro SD card support for local storage application.
4
FCS-0071 User’s Manual
5
Installation
FCS-0071 – Physical Overview
5
FCS-0071 User’s Manual
6
Pin
Function
Description
1
DO_NO
Digital output implementation; Pin7 to COM (Pin6) is a Photo-coupled relay on
Normal Open status. External device can directly connect to the terminals.
However the current that will go through the 2 nodes must not exceed 130mA.
An external “Relay” can also be connected to the terminals as an
implementation. In this case, current (or/and voltage) limitation is specified by
the external Relay.
2
DO_COM
3
DI
Connect to GND to activate, or leave floating (or unconnected) to deactivate.
4
GND
5
Audio In
2 way Audio connectors , and connect to GND to activate
6
Audio Out
7
GND
Terminal block for I/O connectors
6
FCS-0071 User’s Manual
7
1. Hardware Connection
1. Prepare a PC with Ethernet link to the network
2. Connect LAN port (RJ45) of the camera to a network switch/hub
3. Connect power jack (ignore if using PoE)
4. Ensure the power adaptor specification matches the power system (110V or 220V) and connect
the adaptor to the outlet
5. Check LED status (Power/Network)
7
FCS-0071 User’s Manual
8
2. Software Installation
The following software is necessary for the proper display and use of the FCS-0071 from the Web
site. The software will be taken from the Software Package CD.
IP Installer
The IP Installer is used to locate and configure network cameras and video servers on the LAN. This
utility is useful for conveniently configuring the network settings of the device, or for finding a
device once the network settings have been modified.
To install the IP Installer, from the Software CD, select IP installer, then follow the on instructions to
complete the installation.
XVID Codec
An H.264 codec is applied for displaying the video stream and playing the recoded AVI files. If the
video stream can’t be displayed or the recorded AVI files can’t be play on PC, install this software
from the Software CD.
VLC
Though not necessary, this can be used for viewing the streaming without a Web browser.
The camera’s manual recording format is MP4, you also need to use like VLC player to view.
Here is the reference link : http://www.videolan.org
8
FCS-0071 User’s Manual
9
3. Network Configuration
IP Installer is a utility that provides an easier, more efficient way to configure the IP address and
network settings of the devices. It even provides a convenient way to set the network settings for
multiple devices simultaneously using the batch setting function. Moreover, IP Installer can save the
network settings for all devices as a backup and restore them when necessary.
Preparation before IP Assignment
1. Always consult your network administrator before assigning an IP address to your server in order to
avoid using a previously assigned IP address.
2. Ensure the camera is powered on and correctly connected to the network.
3. MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the
device as the serial number (S/N) with 12 digits (e.g. 00116B-XXXXXX).
4. Although the IP Installer is able to find and configure any FCS-0071 on the LAN except those that
are behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to
the Web-based user interface of the camera, the host PC must be in the same subnet. For more
information about subnets, please consult your network administrator.
Using IP Installer to Assign an IP Address to FCS-0071
1. Once IP Installer has been successfully installed on the PC, double click to run the software.
2. Click the [Device Search] to search the device in the LAN.
3. From the list, select the device with the MAC Address that corresponds to the FCS-0071 that is to be
configured. The MAC Address is identical to the unit’s S/N (Serial Number).
9
FCS-0071 User’s Manual
10
4. Double click the select item to open the Property Page or right click the item to select the
[Single Device Setting].
5. Modify the network settings of the camera.
6. After filling in the properties, click [Set] button to complete the configuration settings.
10
FCS-0071 User’s Manual
11
7. Click the [Batch Device Setting] to set several devices.
11
FCS-0071 User’s Manual
12
8. Language support for Chinese, English and Spanish.
12
FCS-0071 User’s Manual
13
Open the Web-based UI of the selected camera
1. To access the Web-based UI of the selected unit, run the Open Web on the select item.
2. For first time user, there will be a prompt to install the ActiveX control. Confirm the installation as it
is required to view the video stream and some operations.
3. If the device has been configured correctly, the default Web browser will open to the home page of
the selected device.
13
FCS-0071 User’s Manual
14
Verify and Complete the Installation from Your Browser
When browsing the Home Page at the first time with the Microsoft Internet Explorer
TM
, you must
temporarily lower your security settings to perform a one-time-only installation of the ActiveX
component onto your workstation, as described below:
1. From the Tools menu, select [Internet Options]
2. Click the [Security] tab and then click [Custom Level] button to see your current security settings.
3. Set the security level to Low and click [OK].
4. Type the URL or IP address of your camera into the Address field.
5. A dialog box will pop up asking if the ActiveX control should be installed. Click [Yes] to start the
installation.
Once the ActiveX installation is complete, return the security settings to their original value, as noted
above.
14
FCS-0071 User’s Manual
15
Using the Web UI
Start your Web browser and enter the URL or IP address in the Address field. The Home page of the
camera is now displayed.
15
Loading...