Levana Lila User Manual [en, es, fr]

™

Lila

Digital Baby Video Monitor

Moniteur vidéo bébé numérique

Video Monitor Digital para Bebé

Manual / Manuel / Manual

CAUTION: Keep small parts away from children. ATTENTION: Gardez les petites pièces hors de la portée des enfants. PRECAUCIÓN: Mantenga las piezas pequeñas fuera del alcance de los niños.

mylevana.com

SAFETY INSTRUCTIONS

CAUTION: Keep small parts away from children.

Strangulation Hazard: Children can become entangled in cords. Power cords

should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors and cameras with power cords should never be hung on or near the crib.

This product is not a toy and should be kept out of children’s reach.

This product contains small parts. Exercise care when unpacking and

assembling the product.

Read and Keep Instructions: All the safety and operating instructions should be

read before the video baby monitor is operated.

This product cannot replace responsible adult supervision.

Water and Moisture: This product is designed for indoor use only. The unit should not

be exposed to rain, moisture, dripping or splashing. No objects ﬁlled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water. Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use. Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air ﬂow. Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, ﬁreplace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight. Power Source: This unit should only be used with the AC power adapters included in this package (rated 6V 800mA) Damage Requiring Service: This unit should be serviced by qualiﬁed personnel only when:

a. Objects have fallen or liquid has been spilled into the product b. The units have been exposed to rain c. The units do not appear to operate normally or exhibits a distinct change in

performance

d. The units have been dropped or the enclosure damaged

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inerference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

IC STATEMENT:

This Class A digital apparatus complies with ICES-003.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modiﬁcations to this equipment. Such modiﬁcations could void the user’s authority to operate the equipment.

Please visit our website at www.mylevana.com for

information about your product’s warranty.

We take quality very seriously. That is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact us using any of the following methods:

Web: www.mylevana.com Support: www.mylevana.com/support

LEVANA Canada LEVANA USA 4080 Montrose Road 60 Industrial Parkway #Z64 Niagara Falls, ON Cheektowaga NY Canada L2H 1J9 USA 14227

Warranty Terms

1. LEVANA purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option.

2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual.

3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty.

4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not speciﬁcally mentioned in this warranty.

5. This warranty does not cover the shipping cost, insurance or any other incidental charges.

6. You MUST contact LEVANA at www.mylevana.com/support before sending any product back for repair. You will be sent a Return Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #).

7. This warranty is valid only in Canada and the continental U.S.

8. This warranty cannot be re-issued.

products are guaranteed for a period of one year from the date of

TABLE OF CONTENTS

SAFETY INSTRUCTIONS ...............................................................................................................2

FCC STATEMENT ............................................................................................................................3

WARRANTY .....................................................................................................................................4

WHAT’S INCLUDED .......................................................................................................................6

BUTTONS AND CONNECTIONS - MONITOR .......................................................................... 7

BUTTONS AND CONNECTIONS - CAMERA .............................................................................8

SETUP ...............................................................................................................................................9

Battery installation .........................................................................................................9

Get the Most Out of Your Rechargeable Battery .....................................................9

Connecting Power to the Monitor / Charging Battery .........................................10

Connecting Power to the Camera ...........................................................................10

Screen Icons ................................................................................................................. 11

OPERATION ..................................................................................................................................12

Turn on the Monitor ....................................................................................................12

Pairing the Cameras & Monitor ................................................................................. 12

Placement of the Monitor .......................................................................................... 13

Placement of the Camera ..........................................................................................13

Mounting the Camera on a Tabletop Safely ...........................................................13

Mounting the Camera on a Wall Safely ...................................................................14

Night Vision ................................................................................................................... 15

Adjusting the Camera Angle ...................................................................................... 15

MONITOR ......................................................................................................................................16

Volume ...........................................................................................................................16

Using the Talk to Baby™ Two-Way Intercom .........................................................16

Using PEEP Mode ......................................................................................................... 17

Selecting a dierent camera view ............................................................................17

Setting the Brightness .................................................................................................18

Contacting Customer Support ..................................................................................18

TROUBLESHOOTING ..................................................................................................................19

MAINTENANCE ............................................................................................................................19

WHAT’S INCLUDED

• Night Vision Camera

• Baby Video Monitor

• Rechargeable Battery

• 2 Power Adapters

This product is not a toy.

This product contains small parts. Exercise care when unpacking and assembling the product.

This product does not replace responsible adult supervision. Check on your child at regular intervals and make sure your monitor is always adequately charged.

LEVANA® does not endorse any LEVANA® products for illegal activities. Levana is not responsible or liable in any way for any damage, vandalism, theft or any other action that may occur while a LEVANA® product is in use by the purchaser.

We reserve the right to change models, conﬁguration, or speciﬁcations without notice or liability. Product may not be exactly as shown.

• Camera Angle Wedge

• Instruction Manual

• 1 Year Warranty

• Lifetime Live Customer Support

MONITOR

1. LED SOUND BAR

LED lights show dierent levels of sound

2. LCD SCREEN

3. POWER / VIDEO ON-OFF BUTTON

4. VOLUME DOWN / MOVE LEFT

BUTTON

5. TALK TO BABY™ BUTTON

Press and hold to talk, release to listen

6. MENU / SELECT BUTTON

4 5

7. MICROPHONE

8. VOLUME UP / MOVE RIGHT BUTTON

9. ANTENNA

Extend to improve signal

10. SPEAKER

11. REMOVEABLE STAND CLIP

12. TABLE STAND

13. BATTERY COMPARTMENT

6 7

CAMERA

1. MICROPHONE

2. POWER ON/OFF BUTTON

3. PAIRING BUTTON

4. INVISIBLE NIGHT VISION LEDs

5. CAMERA

CAMERA ANGLE WEDGE

6. LIGHT SENSOR

7. POWER LED

8. SPEAKER

9. POWER INPUT

6 7

FRONT BACK SIDE

LET’S GET STARTED!

SETUP

Battery Installation

1. Gently remove the STAND CLIP on the back of the monitor to allow access to the BATTERY COMPARTMENT COVER.

2. Slide the BATTERY COMPARTMENT COVER down to remove.

3. Insert the battery with the words "Rechargeable Battery" facing towards you. The battery connectors should line up with the connectors inside the battery compartment.

4. Slide the BATTERY COMPARTMENT COVER back into place and reinstall the STAND CLIP.

Get the Most Out of Your Rechargeable Battery

• Fully charge battery (4 hours) before ﬁrst use.

• To maximize battery life, charge battery before battery is fully drained.

• Avoid extreme heat or cold as this will aect the life of the battery.

• Turn LCD screen OFF; press POWER

• Lila™ menu settings that increase battery life:

PEEP Mode: After 1 minute of inactivity, monitor enters standby/sleep mode.

button on the front of the monitor ONCE.

Battery

connectors

Adjustable Brightness: Decreasing screen brightness will extend battery life.

6. For extended periods of non-use, please remove battery from baby monitor.

SETUP

Connecting Power to the Monitor / Charging Battery

1. Connect the small end of power adapter marked MONITOR monitor as shown in the diagram.

2. Connect the other end of the adapter into an available wall outlet. For safety reasons, ONLY use the adapters included in the package.

3. Press the

4. The icon in the top right corner of the main screen will show you the battery power status.

EMPTY CHARGING FULL

Connecting Power to the Camera

1. Connect the small end of the power adapter marked CAMERA input on the back of the camera base as shown in the diagram. For safety reasons, ONLY use the adapters included in the package.

2. On the side of the camera, slide the POWER switch position. The POWER LED will light up.

into the DC input on the side of the

POWER / VIDEO ON-OFF BUTTON

into the DC

UP to the ON

ON / OFF

Switch

DC Input

Power LED

DC Input

Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.

SCREEN ICONS

SIGNAL STRENGTH

NO STRONG

SIGNAL SIGNAL

BATTERY STRENGTH

EMPTY CHARGING FULL

CAMERA

CAM CAM CAM CAM SEQ 1 2 3 4 MODE

PAIRING

PAIRING CAM CAM CAM CAM 1 2 3 4

VOLUME

OFF LOUD

BRIGHTNESS

DARK BRIGHT

PEEP MODE

OFF LOW MEDIUM HIGH

TALK TO BABY™

SUPPORT

EXIT

OPERATION

Turn on the MONITOR Press and hold the POWER

Pairing the Camera(s) and Monitor

The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually.

Note: Before you begin pairing, be sure to have the monitor and the camera(s)

side by side.

button on the front of the monitor.

1. To pair your camera and monitor, press the MENU button. Using the

–

navigational arrows and press the MENU

2. Use the navigational arrows

on the front of the monitor, highlight the PAIRING icon

button once to select.

–

to select the icon.

3. Press MENU . When you see ﬂashing next to camera icon, quickly press

and hold the PAIRING appear next to camera

transmitted automatically.

button on the side of the camera. A checkmark will

conﬁrming pairing is successful. Video/audio will be

4. To pair additional cameras, repeat steps 1 to 3 and be sure to select camera number

, or in the Pairing menu when pairing each additional camera.

ICONS ARE ORANGE WHEN SELECTED

OPERATION

3 ft

Placement of the Monitor

This monitor can be placed on a tabletop.

• You can place the monitor on a tabletop by using the retractable table stand on the back of the monitor. When not in use, simply tuck the table stand away into the back of the monitor until you hear a "click".

Placement of the Camera

This camera can be placed on a tabletop or hung on the wall above the area being monitored.

• Place the camera within 15 feet of the area being monitored for best picture results.

• Do not place objects within 2 feet of the ﬁeld of vision of the camera as the night vision will not activate correctly if objects are too close.

Mounting the Camera on a Tabletop Safely:

To increase the downward viewing angle of the camera, please insert the included camera wedge to the bottom of the camera (see below).

1. Place the camera on a tabletop no less than 3 feet away from your baby’s crib.

2. Feed the power cord down the back of the table or use wall clips (not included) to secure the cord away so the baby cannot reach it.

3. Plug in the power cord, check the monitor to ensure that you are getting a good view of your child and there are no obstructions.

WITH WEDGE

CAMERA BOTTOM

WITHOUT

WEDGE

OPERATION

Mounting the Camera on a Wall Safely:

Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from baby’s crib.

1. Pre-drill two holes in the wall using a 3/16”, 4.8mm drill bit.

2. Insert wall anchors (not included) into each hole and tap gently with a hammer until the anchor is ﬂush with the wall.

3. Insert a screw (not included) into each wall anchor and tighten until the screws only stick out about a 1/2 inch.

4. Plug the power cord into the power input of the camera.

5. Locate the wall mounting holes on the bottom of the camera base.

6. Slide the holes over the screws sticking out of the wall.

7. Conﬁrm that the camera is secure, if it is loose you may have to tighten the screws more.

8. Use wall clips (not included) to secure the power cord away from the crib or the baby’s reach.

9. Connect the other end of the adapter into an available wall outlet.

OPERATION

Night Vision

The camera is equipped with NEW Invisible IR (infrared) LEDs which keep the nursery dark. The LEDs are located on the front of the camera and allow you to see up to 12 feet in complete darkness so you can check on your baby at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the camera detects that the light levels are too low.

Adjusting the Camera Angle

The camera has a track built into the base. The track allows the camera to pivot UP and DOWN and turn side to side. Always return the camera to the CENTER POSITION

before changing the camera angle.

INPUT

TRACK

INVISIBLE

LEDs

TRADITIONAL

LEDs

FRONT

CAMERA

Note: Camera does not rotate freely 360°. Rotating it past the point where resistance is felt will result in permanent damage to the device.

CENTER POSITION

MONITOR

Volume

Use the navigational arrows

• Press the in LIVE VIEW; the VOLUME icon will display the volume level in the top left corner of the screen.

• Press the MUTE, decrease the volume until the appears in the top left corner of the screen.

Using the Talk to Baby™ Two-Way Intercom

With the simple press of a button you can talk to your child at any time without entering the nursery.

1. To talk, press and hold the of the monitor and release to listen.

2. To talk when using multiple cameras, select the camera in the MENU and press the

release to listen.

Using PEEP Mode

When in PEEP Mode, the monitor enters standby/sleep mode after 1 minute of inactivity. When sound is detected, the screen changes to live view. There are 4 levels

of sensitivity: O

button to INCREASE the volume

–

button to DECREASE the volume; to

Low , Medium and Sensitive .

–

to increase /decrease /mute the VOLUME.

icon

button on the front

button,

• To access live view manually when the screen is o, press the POWER button ONCE.

• PEEP Mode extends the battery life over 72 hours.

MONITOR

1. To set PEEP Mode, press the MENU button.

–

Using the navigational arrows front of the monitor, highlight one of the PEEP

Mode icons.

–

2. Use the

your choice and press the MENU to select.

to toggle to the sensitivity icon of

on the

button once

3. To return to continuous live view, press the MENU

button.

4. To turn o PEEP Mode, follow step 1 and select .

Selecting a Dierent Camera View

1. To change the camera view, press the MENU

–

button. Using the navigational arrows the front of the monitor, highlight the CAMERA

icon and press the MENU

2. Use the navigational arrows

CAMERA icon of your choice and press the MENU

button once to select.

–

to select the

3. Select to cycle through cameras 1 through 4 and press the MENU button

once. Each camera view will appear for 6 seconds per camera.

• To easily disable camera channels from sequence mode, select a camera then press and hold the

• The following diagram represents:

–

or + button to select/deselect.

Camera 1 – Paired Camera 2 – Paired Camera 3 – Paired but disabled Camera 4 – Not paired

+ 39 hidden pages

Levana Lila User Manual [en, es, fr]

Specifications and Main Features

Frequently Asked Questions

User Manual