Leuze DCR40 Data Sheet

3.3 V

DC

RS 232

HIROSE FH33-125-0.5SH(10), 12-pin

Pin No. Signal IN / OUT

1 POLARITY RS232

1)

1) see Remarks

IN
2 VCC / +3.3V DC IN
3 GROUND IN
4 RS232 RxD IN
5 RS232 TxD OUT
6CTS IN
7RTS OUT
8POWER DOWN

1)

OUT

9BEEPER OUT

10 GOOD READ OUT
11 WAKE UP

1)

IN

12 TRIGGER IN

DCR40 CMOS Imager Scan Engine with Integrated Decoder

Dimensioned drawing

en 01-2017/03 50136732

30 … 425mm

 CMOS imager scan engine for all common

1D and 2D codes

 Excellent reading and decoding features
 Very small construction
 Integrated decoder
 RS232 interfaces
 Operating temperature 0°C …+50 °C

A 2 integrated LEDs for illumination (red light)
B 1 integrated target LED (blue light)
C Center of optical axis
D Connector HIROSE (FH33-125-0.5SH(10)), 12-pin
E Mounting tabs (optional)

Electrical connection

Accessories:

(available separately)

 MA-CR Modular adapter unit
 DCR40 Interface Kit for use with MA-CR.

We reserve the right to make changes • DS_DCR40_en_50136732.fm

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. [phone]
[e-mail] • www.leuze.com

Kit includes:

- 12-pin / 6-pin Adapter cable

- DCR 40 Interface board

- Ribbon cable

DCR40… - 01

DCR40

Specifications

Optical data

Optical system CMOS Imager, Rolling Shutter (1280x960)
Read range 30 … 425mm
Resolution 1D codes: m = 0.190mm (7.5 mil), distance dependent

Light source illumination integrated LED (visible red light)
Light source target LED (aimer) integrated LED (visible blue light)
Contrast 15% minimum

Code specifications

Code types 1D:

Stacked 1D:

Postal Codes:

Electrical data

Operating voltage U
Current consumption max. 450mA

B

Interfaces

Interface type RS232
Baud rate RS232 9,600 … 115,200Bd, configurable
Data formats RS232 configurable
Switching outputs NPN transistor outputs, max. 20mA, active low

Switching inputs active/not active = 0V/+5 V or not connected

Mechanical data

Weight 5g
Dimensions (Hx WxD) 11.90x 31.60x16.46mm
Mounting Tabs Ø 2.5mm through-hole (optional, see order guide)
Fastening 4 M1.8 screws, 2mm deep
Connection type HIROSE FH33-125-0.5SH(10), 12-pin

Environmental data

Temperature range (operation) 0°C … +50°C
Ambient temperature (storage) -20°C … +60 °C
Air humidity 10 … 90% rel. humidity, non-condensing
Ambient light max. 100,000 lux
Standards conformity CE, RoHS, FCC, EN 55022:2006 Class B, IEC 62471:2006

2D codes: m = 0.127mm (5mil), distance dependent

BC412, Codabar, Code 11, Code 32, Code 39, Code 93, Code 128,
IATA 2 of 5, Interleaved 2 of 5, GS1 DataBar, Hong Kong 2 of 5,
Matrix 2 of 5, MSI Plessey, NEC 2 of 5, Pharmacode, Plessey,
Straight 2 of 5, Telepen, Trioptic, UPC/EAN/JAN

Codablock F, Code 49, GS1 Composite (CC-A/CC-B/CC-C),
MicroPDF, PDF417

Aztec Code, Data Matrix, Han Xin, Micro QR Code, QR Code

2D:

Australian Post, Canada Post, Intelligent Mail, Japan Post,
KIX Code, Korea Post, Planet, Postnet, UK Royal Mail, UPU ID-tags

3.3V DC

(successful reading, beeper, power down)

(trigger, wake-up)

Remarks

Operate in accordance with
intended use!

 This product is not a safety sensor

and is not intended as personnel
protection.

 The product may only be put into

operation by competent persons.

 Only use the product in accor-

dance with the intended use.

 Features

Very small and light scan en­gine with integrated decoder
for all common 1D and 2D
codes.
Data transmission via config­urable RS232 interface.

 RS232 polarity control

When unconnected, all
RS232 signals have their nor­mal polarity.
When connected to GND, all
RS232 signals have inverted

polarity.
Do not tie high!

 Power down / Wake-up

Sleep state is indicated by
the output POWER DOWN.
To bring the unit out of sleep
state, connect input

WAKE UP to GND.

Read ranges

Code type / resolution m Typical reading distance [mm] ([inch])

Code 39 / 0.190mm (7.5mil) 50 (2.0) 245 (9.6)
GS1 Databar / 0.267mm (10.5 mil)
UPC / 0.330mm (13mil)
PDF417 / 0.147mm (5.8 mil)
PDF417 / 0.170mm (6.7 mil)
Data Matrix / 0.127mm (5 mil)
Data Matrix / 0.160mm (6.3 mil)
Data Matrix / 0.254mm (10 mil)
Data Matrix / 0.528mm (20.8 mil)

35 (1.4) 225 (8.9)
40 (1.5) 370 (14.6)

85 (3.3) 155 (6.1)

65 (2.6) 175 (6.9)

75 (3.0) 90 (3.5)
70 (2.8) 135 (5.3)

50 (2.0) 205 (8.1)

30 (1.2) 425 (16.7)

Order guide

Product Name Description Part no.

DCR40M2/R2 CMOS imager scan engine for 1D and 2D codes,

RS232 interface, HIROSE FH33-125-0.5SH(10), 12-pin

DCR40M2/R2-MTX CMOS imager scan engine for 1D and 2D codes,

RS232 interface, HIROSE FH33-125-0.5SH(10), 12-pin,
without mounting tabs

MA-CR Modular adapter unit to interface device to host 50128204

DCR40-IFK DCR40 Interface Kit for use with MA-CR. Kit includes:

12-pin / 6-pin Adapter cable, DCR 40 Interface board, Ribbon cable

DCR40… - 01 2017/03

50134999

50136738

50136748