Leuze CR55 Data Sheet

Page 1
5 V
DC
RS 232
IP 54
Mounting screws M2.5 should not extend more than 5mm inside the housing!
Wire color Signal Description IN / OUT
Red +5VDC Power supply 5VDC IN Violet GND Power supply 0VDC / Ground IN Black SW OUT Switching output OUT Orange SW IN Switching input IN White RS 232 RxD Serial interface IN Green RS 232 TxD Serial interface OUT
RS232 - cable
USB
PIN Signal
1 2 3 4
Data­Data+ GND
+ 5 V DC
USB Standard A
1234
WS
/
WH
SW IN
GND
SW OUT
5
V DCDC +
NC
BR
/
BN
GN
/
GN
GE
/
YE
GR
/
GY
RS232 RxD
RS
/
PK
RS232 TxD
/
BU
FE/Shield
RT
/
RD
RS232 - M12 connector
CR55 Bar code reader
Dimensioned drawing
en 02-2016/07 50129160-01
50 … 230mm
CCD linear scanner for all common 1D bar
codes
Very compact designIntegrated decoderRS 232 or USB 2.0 interfaceMetal caseSimple mounting and fastening
A Status LEDs B Receiving optics and LED scanning line
Electrical connection
Accessories:
(available separately)
Connection cable M12, socket straight,
8-pole, cable length 2m, shielded K-D M12A-8P-2m-PUR (part no. 50104591)
We reserve the right to make changes • DS_CR55_en_50129160_01.fm
Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen
SW OUT
RS232 RxD
RS232 TxD
FE/Shield
SW IN
GND
NC
WS BR GN GE GR
RS
BLBL
RT
WH BN GN YE GY
PK
BU
RD
CR55M2… - 02
Page 2
-70
-60
-40
-30
-20
-10
0
10
20
30
40
60
70
0 30 60 90 120 150 180 210 240
m=0.165 mm (6.5 mil)
m=0.127 mm (5 mil)
m=0.2 mm (8 mil)
m=0.25 mm (10 mil)
m=0.5 mm (20 mil)
Code 128, Grade A Static Code Reading
CR55M2
-50
50
typical read distance [mm]
typical width of reading field [mm]
CR55
Specifications
Optical data
Optical System CCD Linear Imager Light source integrated LED (visible red light) Wavelength 617nm Scanning rate typ. 330 Scans/s Read distance 50mm … 230 mm Contrast 30% modulation
Code specifications
Code types 2/5 Interleaved, Code 39, Code 128 (incl. Typ C), EAN 128,
Modulbreite 5 … 20mil / 127 … 500μm (depending on read distance)
EAN 8, EAN 13, UPC A, UPC E, Codabar, Code 93
Electrical data
Operating voltage 4,5 … 5,5V DC (PELV) Current consumption max. 120mA LEDs 1 device status (PWR),
1 read status (GOOD READ)
Interface
Interface type RS 232 or USB 2.0 (virtual COM, HID) Baud rate RS232 300 … 115.200Bd, configurable Data formats RS232 configurable Trigger switching input (RS232 only, active/inactive = 0V/+5 V or
Switching output RS232: NPN transistor output, max. 20mA (Good Read)
unwired) or Presentation Mode
Mechanical data
Housing metal, diecast aluminium Weight 45g (without cable) Dimensions (H x W x D) 18.3x31x45.5 mm Mounting 2 threaded holes M2.5, 5mm deep Connection type RS232: fixed cable, 2m long, 6 x 0.081mm
approx. 0.15m cable with M12 connector, 8-pole, A-coded
USB: fixed cable, 1.8m long, with USB connector standard A
Environmental data
Ambient temperature (operation) 0°C … +50°C Ambient temperature (storage) -20°C … +60°C Air humidity max. 90% rel. humidity, non-condensing Protection class IP 54 Electromagnetic compatibility EN 55022, IEC 62471 Conformity CE, FCC Certifications UL 60950-1, CSA C22.2 No. 60950-1-07
1) The imager module contains diboron trioxide (declaration according to REACH regulation)
1)
2
(6 x 28 AWG) or
Remarks
Operate in accordance with intended use!
This product is not a safety sensor
and is not intended as personnel protection.
The product may only be put into
operation by competent persons.
Only use the product in accor-
dance with the intended use.
Features
Compact scanner with inte­grated decoder for all com­mon 1D bar codes. Data transmission via confi­gurable RS232 or USB 2.0 in­terface.
Driver
USB driver for configuration of the CR55 scanners: Download "
LeAnalysisCollectionSetup
from www.leuze.com
"
Reading field
Order guide
CCD Linear Imager with Designation Part No.
RS 232 interface, fixed cable, 2m long CR55M2/R2 50126080
RS 232 interface, 0.15m cable with M12 connector CR55M2/R2-150-M12.8 50131582
USB interface, fixed cable, 1.8m long CR55M2/UB-1800-S6 50127723
CR55M2… - 02 2016/07
Loading...