U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with
RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP
Schedule contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or
if the agency is unable to accept this Program under these terms, then we provide this Program under the
provisions set forth in Commercial Computer Software–Restricted Rights at FAR 52.227-19, when
applicable, or under Rights in Data-General, FAR 52.227.14 (Alternate III).
Contents
Read This First...................................ii
Chapter 1. Getting to Know
Your Computer...................................1
Top View .................................................1
Index .................................................70
Lenovo IdeaPad Y510
i
Read This First
When your computer is turned on or the battery is charging,
the base, the palm rest, and some other parts may become
hot. Avoid keeping your hands, your lap, or any other part of
your body in contact with a hot section of the computer for
any extended length of time. When you use the keyboard,
avoid keeping your palms on the palm rest for a prolonged
period of time.
Your computer generates some heat during normal
operation. The amount of heat depends on the amount of
system activity and the battery charge level. Extended contact
with your body, even through clothing, could cause
discomfort or even a skin burn. Periodically take breaks from
using the keyboard by lifting your hands from the palm rest;
and be careful not to use the keyboard for any extended
length of time.
When the AC adapter of your computer is connected to an
electrical outlet, it generates heat. Do not place the adapter in
contact with any part of your body while using it. Never use
the AC adapter to warm your body. Extended contact with
your body, even through clothing, may cause a skin burn.
Route the cables of an AC adapter, a mouse, a keyboard, a
printer, or any other electronic device, or communication
lines, so that they cannot be walked on, tripped over, pinched
by your computer or other objects, or in any way subjected to
treatment that could disturb the operation of your computer.
Applying strong force to the cables may damage or break
them.
ii
Read This First
Before moving your computer, do one of the following: turn
it off or press Fn + F1 to put it in sleep mode.
Before moving the computer, make sure that the power on
indicator is off. This will help to prevent damage to the hard
disk drive, and possible loss of data.
Do not drop, bump, scratch, twist, hit, vibrate, push, or place
heavy objects on your computer, display, or external devices.
Use a quality carrying case that provides adequate cushion
and protection. Do not pack your computer in a tightly
packed suitcase or bag.
Place liquids away from your computer to avoid spills, and
keep your computer away from water to avoid the danger of
electrical shock.
The integrated built-in camera allows picture taking or video recording, and
can be used with video conferencing and other interactive applications.
Note:
The camera can only be used when it is turned on. Press Fn + Esc to turn on or
turn off the camera.
bWireless LAN antennas
A diversity antenna system is built into the display for optimal reception,
enabling wireless communication wherever you are.
cComputer display
The color display with TFT technology provides clear and brilliant text and
graphics.
* Polymethyl methacrylate (PMMA) film is used on specific models, which has
excellent strength and transparency.
dTouch inductive panel and Multi-media buttons
Control buttons integrated for convenient Multi-media playing.
For details on “Touch inductive panel and multi-media buttons”, see page 17.
eSpeakers
Built-in speakers for rich powerful sound.
fBattery Capacity indicators
You can check the battery life and the current operation status.
gSystem status indicators
For details on “System status indicators”, see page 19.
hNovo button
When the computer is turned off, this button functions as a OneKey Recovery
key; use with caution.
For details on “Novo button”, see page 16.
iPower button
Use the Power button to turn on the computer. The Power button also can be
programmed to shut down the computer or put it into sleep or hibernation.
For details on “Putting your computer to Sleep or Shutting It Down”, see page 11.
jKeyboard
The keyboard provides full-sized keys with comfortable travel.
For details on “Using the Keyboard”, see page 14.
kTouch pad
For details on “Using the Touch Pad”, see page 13.
Connect the power adapter here to supply power to the computer and charge the
internal battery.
Note:
To prevent damage to the computer and battery pack, use the supplied AC adapter
only.
bLAN port
The LAN port supports a standard RJ-45 connector, and allows you to connect the
computer to a local network.
Attention:
As the voltage of a telephone connection is higher than that of a network, do not
attempt to connect a telephone cable to the LAN port or else a short circuit of the
computer might occur.
5a
3
Chapter 1. Getting to Know Your Computer
cFan louvers
The fan louvers allow warm air to exit the computer.
 Important:
Make sure that paper, books, clothing, cables or other objects do not block any
of the fan louvers or else overheating of the computer may occur.
dVGA port
Use this port for an external computer monitor.
ePCI Express card (new card) slot
Use this slot to install a PCI Express card (new card).
fUSB 2.0 port
The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices such as
a keyboard, mouse, camera, hard disk drive, printer, and scanner. USB allows
devices to be connected and disconnected without rebooting the computer (hot
swapping), and allows specific classes of hardware to be used without
requiring individual device drivers to be installed.
Attention
When using high power consumption USB device such as USB ODD, PLS. Use
external device power adapter, otherwise will cause system shut down.
gIEEE 1394 connector
The IEEE 1394 connector is used for connecting devices that are compatible
with the IEEE 1394 interface, such as digital video cameras and external hard
disk drives.
hTV-in jack (Specific models only)
Use this jack to connect with TV signal cable through the provided TV adapter
(Analog input supported).
For details on TV function, see the Help menu in Shuttle Center.
Attention:
For Class I equipment: In Norway, intended to be connected to cable
distribution system, the screen of a coax cable is required to be galvanically
isolated from the protective earth, the Norwegian text, “M-kun tilkoples kabelTV nett via galvanisk isolator”.
The headphone jack is used to connect headphones or a speaker.
The SPDIF jack is used to output digital audio signal.
To output digital audio signal, do as follows:
1 Connect the SPDIF device. Right-click the Sound icon at the bottom-right
corner of the task bar and select Playback Devices from the pull down menu.
2 When all players are turned off, select Speakers and click Set Default button.
Select Realtek Digital Output and click Set Default button.
3 Click the OK button to save the settings.
bMicrophone jack (external)
The microphone jack can be used to connect an external microphone for video
conferencing, voice narrations, or simple audio recordings.
cUSB 2.0 port
The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices such as a
keyboard, mouse, camera, hard disk drive, printer and scanner. USB allows devices
to be connected and disconnected without rebooting the computer (hot swapping),
and to allow specific classes of hardware to be used without requiring individual
device drivers to be installed.
Attention
When using high power consumption USB device such as USB ODD, PLS. Use
external device power adapter, otherwise will cause system shut down.
5
Chapter 1. Getting to Know Your Computer
dS-video jack
Use this connector to directly connect an external video device. This computer
supports standard S-video through an S-video cable.
eOptical drive (types vary by model)
Your computer comes with an optical device, such as a CD-ROM drive or a
DVD/CD recordable drive.
For this model, there are two kinds of optical drives:
(1) Slot-in type:
Provides a convenient and quick way to insert and eject disc. Keep the disk flat
and gently insert the disc into the slot. The drive will begin reading data from
the disc. To remove a disc, press the Eject button .
(2) Tray type:
Press the Eject button to open the drive tray, place the disc on the tray, then
gently push the drive tray back in. The drive will begin reading the data from
the disc. To remove a disc, press the Eject button to open the tray and then
remove the disc from the tray.
Attention:
* The slot-in type cannot read 8 cm discs. Never insert 8 cm discs into this kind
of optical drive.
** It is normal to hear the CD spinning in the optical drive while data is being
read.
fModem Port
The modem port supports a standard telephone cable with one RJ-11
connector, and allows dial up access to an internet service provider (ISP).
 Important:
Do not connect the modem port to a digital circuit cable, or else the current in
the digital circuit may damage the modem.
gSecurity keyhole
Your computer comes with a security keyhole. You can purchase a security
cable and lock to fit this keyhole.
Hint:
Before purchasing any security product, verify that it is compatible with this
type of security keyhole.
The multimedia subwoofer features a super bass effect while you are watching
movies or enjoying music.
bBattery latch - spring loaded
The spring-loaded battery latch keeps the battery pack secured in place. When you
insert a battery pack, this latch automatically secures the battery in place. To
remove the battery, hold this latch in the unlocked position.
7
Chapter 1. Getting to Know Your Computer
cBattery pack
The battery pack provides power for the computer when no AC power source
is available. If the AC adapter is connected to the computer, the battery pack is
automatically charged. For details on “Using battery and AC adapter”, see
page 28.
dBattery latch - manual
The manual battery latch is used to keep the battery pack secured. Move the
manual battery latch to the unlocked position to insert or remove the battery
pack. Move the manual latch to the locked position after inserting the battery
pack.
eHard Disk Drive/ TV card (Specific models only) compartment
The hard disk drive and TV-card are secured in a compartment.
 Important:
Do not disassemble or replace the hard disk drive yourself! If you do need to,
ask a Lenovo authorized service center or dealer to disassemble or replace it.
fCentral Processor Unit (CPU)/ Memory (RAM)/ Wireless LAN Card
compartment
Central Processor Unit (CPU)
The CPU compartment provides space for the CPU and the radiator.
 Important:
Do not replace the CPU yourself! Visit an authorized service center or
retailer for replacing.
Memory (RAM) compartment
The memory compartment provides expansion capabilities for additional
memory. The BIOS automatically detects the amount of memory in the
system and configures CMOS accordingly during the Power-On Self-Test
(POST) process. There is no hardware or software (including BIOS) setup
required after the memory is installed.
Notes:
(1) Only purchase expansion modules from authorized retailers of this
computer to ensure maximum compatibility and reliability.
(2) If you only insert one memory card in the compartment, plug it into the
slot near the mainboard.
Wireless LAN Card compartment
The wireless network card are secured in a compartment.
 Important:
Do not disassemble or replace the Wireless LAN card by yourself! If you do
need to, ask a Lenovo authorized service center or dealer to disassemble or
replace it.
The built-in microphone (with noise reduction) can be used for video
conferencing, voice narration, or simple audio recordings.
bSystem status indicators
For details on “System status indicators”, see page 19.
cWireless device switch
This switch turns on or turns off Wireless LAN and Bluetooth devices
simultaneously. To enable wireless/bluetooth, slide the latch to the right and
press Fn + F5. When you do not need to use the Wireless LAN and Bluetooth
function, turn it off to extend battery power.
dMulti-media reader slot
You can insert an SD Card, a Multi-media Card, a Memory Stick, an xD-Picture
Card, an SD pro card or a Memory Stick Pro card into the Multi-media Reader
slot.
Note:
Only use the memory card listed above; for detail information about the usage,
read the instructions shipped with the memory card.
eCIR port
For use with a Lenovo remote control. You can use the remote control to
operate Lenovo Shuttle Center. For details of the remote control operation, see
the instructions supplied with it.
When you finish working with your computer, you can put it to sleep or shut it down.
Putting your computer to Sleep
If you will be away from your computer for only a short time, put the computer to sleep.
When the computer is in sleep, you can quickly wake it and bypass the startup process.
To put the computer to sleep, do one of the following.
Click Start and select Sleep from the Start menu.
Press Fn+ F1.
Press the power button.
¾ Warning:
Wait until the power indicator light starts blinking (indicating that the computer is in
sleep) before you move your computer. Moving your computer while the hard disk is
spinning can damage the hard disk, causing loss of data.
To wake the computer, do one of the following.
Press the power button.
Press any key
Shutting Down Your computer
If you aren’t going to use your computer for a day or two, shut it down.
To shut down your computer, click Start and select Shut down from the Start menu.
The touch pad consists of a pad a and two click buttons at the bottom of the keyboard.
To move the cursor b on the screen, slide your fingertip over the pad in the direction in
which you want the cursor to move. The functions of the left c and right d click
buttons correspond to those of the left and right mouse buttons on a conventional
mouse.
%
$
'&
Note:
You can also attach and use a USB mouse through the USB connector.
Your computer has a numeric keypad and function keys incorporated in the standard
keyboard.
Numeric Keypad
The keyboard has keys that, when enabled, work as a 10-key numeric keypad.
To enable or disable the numeric keypad, press Fn+Insert/NmLk.
14
Chapter 2. Using Your Computer
Function Key Combinations
Through the use of the function keys, you can change operational features instantly. To
use this function, press and hold the Fn key a; then press one of the function keys b.
%
$
The following describes the features of each function key.
Fn + Esc: Turn on/off the integrated camera.
Fn + F1: Put your computer in sleep mode.
Fn + F2: Turn off the LCD screen (any subsequent operation will turn the LCD screen
back on).
Fn + F3: Shift to other connected display devices.
Fn + F4: Switch between wide screen and normal mode.
Fn + F5: Enable/disable the built-in wireless device feature.
Fn + F8: Enable/disable the touch pad.
Fn + F9: Enable/pause Media Player playback.
Fn + F10: Stop Media Player playback.
Fn + F11: Skip to the previous track.
Fn + F12: Skip to the next track.
Fn + Insert/NmLk: Enable/disable the Numeric keypad.
Fn + Delete/ScrLk: Enable/disable Scroll Lock.
Fn + P
Your computer has several special keys and buttons.
Novo button
The Novo button functions as OneKey Recovery key; use with caution. Press the Novo
button to enter the main interface of OneKey Recovery while the power is off.
Attention:
When you press NOVO key to turn on the computer, please ensure that your computer
is not connected with other peripherals (such as USB storage device, etc.), otherwise the
system may not operate properly.
Once done, the system can no longer return to its previous state. All data on the primary
hard disk partition (usually drive C) will subsequently be lost. Make sure all important
files on the primary hard disk partition have been backed up onto another hard disk or
USB hard disk drive before this operation.
For details, see OneKey Recovery User Guide.
Note:
When your computer is running Windows Vista™, and if you have the EnergyCut
program installed, you can shift the power schemes by pressing the Novo button.
16
Chapter 2. Using Your Computer
Touch inductive panel and multi-media buttons
17
Touch inductive panel (a~l)
a Mute/unmute the sound.
b Open user define utility.
c Open Dolby function setup screen.
Multi-media control buttons*
d Play / Pause
e Stop
f Previous track
g Next track
Chapter 2. Using Your Computer
Equalizer buttons*
h Jazz
i Pop
j Dance
k Classic
l Normal
Multi-media buttons (m~n)
mSwitch between Multi-media control buttons and Equalizer buttons.
nChange volume.
* Press the m to switch between Multi-media control buttons (4~7) and