Lenovo 104614U, ThinkServer RD230, ThinkServer RD240 User Manual

Page 1
ThinkServerRD230andRD240 RemoteManagementUserGuide
Page 2
Page 3
ThinkServerRD230andRD240 RemoteManagementUserGuide
Page 4
Note:
Beforeusingthisinformationandtheproductitsupports,besuretoreadandunderstandthefollowing:
•TheImportantNoticesthatcamewithyourproduct
SecondEdition(September2010)
©CopyrightLenovo2010.
LENOVOproducts,data,computersoftware,andserviceshavebeendevelopedexclusivelyatprivateexpenseandare soldtogovernmentalentitiesascommercialitemsasdenedby48C.F .R.2.101withlimitedandrestrictedrightsto use,reproductionanddisclosure.
LIMITEDANDRESTRICTEDRIGHTSNOTICE:Ifproducts,data,computersoftware,orservicesaredeliveredpursuant aGeneralServicesAdministration“GSA”contract,use,reproduction,ordisclosureissubjecttorestrictionssetforth inContractNo.GS-35F-05925.
Page 5
Contents
Chapter1.Introduction.........1
Terminology.................1
Safetyinformation..............1
Chapter2.Overviewofthe ThinkServerRemoteManagement
Module.................3
FeaturesofThinkServerRemoteManagement
Module..................3
Chapter3.Conguringthe ThinkServerRemoteManagement
Module.................5
Chapter4.ThinkServerRemote
Managementquickstart........7
Prestart..................7
Login...................8
Navigation.................8
Onlinehelp................10
LogoutThinkServerRemoteManagement
Module.................10
Chapter5.Remoteconsole(KVM)
operation...............11
Startredirectionconsole...........11
Mainwindow...............11
Menubaroftheremoteconsole........11
Videomenuoftheremoteconsole.....12
Keyboardmenuoftheremoteconsole...12
Mousemenuoftheremoteconsole....12
Optionmenuoftheremoteconsole....12
Devicemenuoftheremoteconsole....12
Statusbaroftheremoteconsole.......13
Chapter6.ThinkServerRemote ManagementModuleWebconsole
options................15
Systeminformation.............15
ViewSystemInformation.........15
ServerHealth...............15
ViewSensorReadings..........15
ViewEventLog.............16
Congurationofsettings...........16
Alerts................16
CongurationofMouseModeSetting....17
CongurationofNetworkSettings.....17
MakeSMTPSetting...........18
Usermanagement...........18
BMCsensorsettings..........18
Date/TimeandNTPServerSetting.....18
CongureSSLUpload..........18
RemoteControl..............18
ConsoleRedirection...........19
ServerPowerControl..........19
OtherControl.............19
Maintenance...............19
GroupControl...............20
Languages................20
AppendixA.FAQ...........21
AppendixB.Notices.........23
Trademarks................24
©CopyrightLenovo2010
iii
Page 6
ivThinkServerRD230andRD240RemoteManagementUserGuide
Page 7
Chapter1.Introduction
ThankyoufororderingandusingtheThinkServer®RemoteManagementModule,hereinafterreferredto astheRemoteManagementModule.
TheUserGuidedescribeshowtousetheRemoteManagementModule,theoverviewofthemodulefeatures andhowtosetupandoperatethemodule.
TheUserGuideisforsystemadministratorsresponsibleforinstallation,troubleshooting,upgradeand maintenanceoftheRemoteManagementModule.Asasystemadministrator,onceyouarefamiliarwith theGuideyoucanuseRemoteManagementModuletoaccessremotelyfromanylocationtorespondfor emergency.
Terminology
Thefollowingtableliststhetermsusedinthisdocumentanditscorrespondingdescriptions.
AbbreviationDenition
BMCSystemBoardManagementController
DHCPDynamicHostCongurationProtocol
IPMI
IntelligentPlatformManagementInterface
KVMKeyboard,videoandmouse
MACMediaAccessController
TCP/IPTransferControlProtocol/InternetProtocol
Safetyinformation
WithreferencetoeithertheGuideorotherdocuments,youshouldalwayspayparticularattentiontosafety informationbeforeoperatingtheThinkServer.T oensurefullcompliancewiththeexistingcerticationand licensing,youmustfollowtheinstallationinstructionsintheGuide.
Warning:
Poweron/off:ThepowerbuttoncannotcutoffsystempowerorRemoteManagementModulepower. TocutoffthepowerofRemoteManagementModule,youmustdisconnecttheACpowercordfromthe poweroutlet.Whenopeningthechassistoinstallorremovetheparts,youshouldmakesuretheAC powercordhasbeendisconnected.
Dangeroussituations,equipmentandcables:Power,telephonesandsignalcablesmayhavethe dangerofelectricshock.Beforeopeningthedevice,shutdowntheserver,disconnectedthepowercord, thecommunicationsystem,networkandmodemconnectedtotheserver.Otherwise,itmayresultin personalinjuryorequipmentdamage.
ElectrostaticDischarge(ESD)andESDprotection:ElectrostaticDischarge(ESD)candamagedisk drivers,systemboardandothercomponents.Werecommendthatyoucompleteallthestepsinthis SectiononlyintheESDprotectiveworkstations.IfESDworkstationisunavailable,wearanti-staticwrist strapwhileholdingpartsandconnectthewriststraptothegroundwire(thatis,anyunpaintedmetal surface)oftheserverchassistoprovideESDprotection.
©CopyrightLenovo2010
1
Page 8
ESDandholdingsystemboards:Becarefulwhenholdingthesystemboard.Theyareextremely sensitivetoESD.Onlytouchtheedgewhenholdingthesystemboard.Laythesystemboardwith componentssidefacingupwardsaftertakingthesystemboardoutoftheprotectionbagorthesever. Usetheconductivefoampad(ifany)ratherthanthesystemboardpackage.Donotslidethesystem boardonanysurface.
Installingorremovingjumper:Jumperisasmallplasticconductorbetweentwojumperpins.Some jumpershaveasmallwingonthetopforyoutousengertipsorneneedleforcepstoclipit.Ifthe jumperhasnosuchwing,becarefulwheninstallingorremovingitwithneedleforceps,andclipthe jumper'snarrowfaceinsteadofthewideone.Clippingthewidefacewilldamagethecontactsinside thejumper,whichwillleadtointermittentfaultstosomefunctionscontrolledbythejumper.Clipthe jumpercarefullywithpliersorothertoolsanddonotsqueezewhenremovingit.Otherwise,pinsonthe systemboardmaybebentorbroken.
2ThinkServerRD230andRD240RemoteManagementUserGuide
Page 9
Chapter2.OverviewoftheThinkServerRemoteManagement Module
ThissectionbrieydescribesthefeaturesoftheRemoteManagementModule.
TheRemoteManagementModulerunsontheserversystemasanintegratedsolutionandintegrates theembeddedoperatingsystem.Independentoftheserveroperatingsystem,theembeddedoperating systemcanprovideawholesetofcomplete,stableandeffectivesolutionfortheserver.Asasystem administrator,youcanrespondanytimeandanywheretoemergencyfailureandtakeremotecontrolon theserverthroughthenetwork.
FeaturesofThinkServerRemoteManagementModule
ThinkServerRemoteManagementModuleiseasilyaccessiblebyremoteKVMandcontrollableviaLAN orInternet.Itwilldigitizeandcompressthecollectedvideosignal,keyboard,mousesignalsandthen sendtotheremoteconsole.Embeddedwithremoteaccessandrelatedcontrolsoftware,themodule alsoallowsintegratedremotepowermanagementviaIPMI.KeyfeaturesoftheRemoteManagement Moduleareasfollows:
•EmbeddedWebUI-remotepoweron/off,systemhealth,systeminformation,alertnoticationand eventlog
•USB2.0mediaredirection-bootfromremotemedia
•Security-opensourceSSL
•CompatiblewithIPMIV2.0
•KVM-allowremoteviewingandconguringinthePOSTandBIOSsetuputility
©CopyrightLenovo2010
3
Page 10
4ThinkServerRD230andRD240RemoteManagementUserGuide
Page 11
Chapter3.ConguringtheThinkServerRemoteManagement Module
ThischapterdescribeshowtousetheSetupUtilityprogramtoconguretheThinkServerRemote ManagementModulefromtheun-conguredstatustotherunningstatus.Whenyouinstallthemoduleinto yourserverforthersttime,themodulebydefaultwillsearchDHCPserveronthenetworktoautomatically assigntheIPaddress,subnetmask,andgateway.ItisrecommendedthatyoumanuallysetastaticIP addressintheSetupUtilityprogram.
TosetanIPaddress,dothefollowing:
1.Connecttheservertoaworkingelectricaloutletandturnontheserverbypressingthepowerbutton.
2.PressDelassoonasyouseethelogoscreen.TheSetupUtilityprogramopens.Ifyouhavesetan administratorpassword,youmusttypetheadministratorpasswordtoaccessthefullSetupUtility programmenu.WhenworkingwiththeSetupUtilityprogram,youmustusethekeyboard.Thekeys usedtoperformvarioustasksaredisplayedatthebottomofeachscreen.
3.Fromthemainmenu,selectAdvancedIPMI2.0CongurationSetLANCongurationSetup LANConguration.RefertoT able1“SetupLANCongurationsubitems”onpage5forinformation aboutthesubitems.
4.FromtheIPAddressSourceoption,youcanchooseST A TICorDHCPtosettheIPaddress.Itis recommendedthatyoumanuallysetastaticIPaddress.
5.Whenyounishtheconguration,selectSaveLANCongurationtosavethesettings.
Table1.SetupLANCongurationsubitems
IPAddressSourceOptions:STATIC/DHCPStatic:StaticIP
conguration.IPand thesubnetmaskcanbeset manually. DHCP:DynamicIP conguration.Thesystem canautomaticallyobtainIP address.
SetupLANConguration
SaveLANConguration
Whenyounishsetting theIPaddress,selectthis optiontosavethesettings.
©CopyrightLenovo2010
5
Page 12
6ThinkServerRD230andRD240RemoteManagementUserGuide
Page 13
Chapter4.ThinkServerRemoteManagementquickstart
ThissectiondescribeshowtoquicklyacquaintwithrelatedoperationsoftheRemoteManagementModule. Inaddition,italsodescribestheadvancedfeaturesofhowtologinthemoduleandoptionsavailablewhile browsing,andhowtologout.
Prestart
TheRemoteManagementModulehasanembeddedWebserverandanapplicationwithmultiplestandard interfaces.Thissectiondescribestheseinterfacesandtheirusages.Y oucanusetheTCP/IPprotocolto accesstheseinterfaces.
Note:Asthesupportedfunctionsoftheproductvarywithcongurations,refertotheactualproduct description.
Formoreinformationabouttheinitialsettings,seeChapter3“ConguringtheThinkServerRemote ManagementModule”onpage5
.TheusernameinthisSectionis“root”.Besides“root”,otherusernames
andpasswordsarealsoaccepted.Thedefaultusernameandpasswordareasfollows:
•Username=root
•Password=superuser
TheRemoteManagementModuleisaccessiblethroughthestandardJava
-enabledWebbrowserwith
HTTPandHTTPS.
HTTP/HTTPS:TheembeddedWebserverprovidesfullaccesspermission.Y oucanaccesstheRemote ManagementModuleviaencryptedHTTPSprotocolorHTTPprotocol.WhenaccessingthroughtheHTTP protocol,notethat:
•WithaccesstoThinkServerRemoteManagementModuleviatheHTTPSprotocol,thebrowsermay promptyoutotrustandinstallthesecuritydigitalcertication,andyoujustfollowthepromptstoimport andconrmthecertication.
•InIE6onWindows2003operatingsystem,ifusingHTTPSprotocoltoaccesstheRemoteManagement Module,youneedtouncheckInternetExplorerEnhancedSecurityCongurationitemintheControl PanelAdd/RemoveWindowsComponents.
•InIE7ontheWindows2008operatingsystem,ifusingHTTPSprotocoltoaccesstheRemote ManagementModule,youneedtoclickStartAdministrativeT oolsServerManagerSecurity InformationIEEnhancedSecurityConguration,andthenselectOffandclickOK.
Formakingtheremoteconsole(KVM)windowofthemanagedserverworks,youmustinstallJavaruntime environment(JRE)V6.0Update13orhigher.
Note:Theswitchmustsupport10M/100M/1000Madaptive.
©CopyrightLenovo2010
7
Page 14
Login
ForlogginginThinkServerRemoteManagementModule,adheretothefollowingsteps:
Step1.InputtheIPaddressassignedbytheThinkServerRemoteManagementModuleintotheWeb
browser.
Forexample: http://10.223.131.36/
Touseasecureconnection,typeinasthefollowingexample: https://10.223.131.36/
BrowserwillthenbedirectedtotheloginpageofRemoteManagementModule.
Step2.Entertheusernameandpassword.
Forexample:
•Username=root
•Password=superuser
Note:Theusernameandpasswordarecasesensitive.
Step3.ClicktheLoginbuttontoviewthehomepageoftheRemoteManagementModule.
Afterasuccessfulinitiallogin,thesystemadministratorcancreatenewusersandhasfullpermissionof RemoteManagementModule.
Navigation
WhentheThinkServerRemoteManagementModuleissuccessfullyloggedon,theThinkServerRemote ManagementModulehomepagewillappear.
ThereareseventabsonthehorizontaltoolbarwhichisonthetopoftheThinkServerRemoteManagement Modulehomepage.Byclickingthesetabs,youcangetthespecicsysteminformationandtakethe relevanttaskslistedinthefollowingtable:
TabFeatures
SystemInformation
Byclickingthistab,youcanaccessthegeneral informationrelatedtotheserver.SystemInformation pagewillautomaticallyshowingeneral,thistaballows accessingthefollowingitems:
•SystemInformation
ServerHealth
Byclickingthistab,youcanaccessthesensorandevent log.SensorReadingspagewillautomaticallyshow.In general,thistaballowsaccessingthefollowingitems:
•SensorReadings
•EventLog
8ThinkServerRD230andRD240RemoteManagementUserGuide
Page 15
TabFeatures
Conguration
Byclickingthistab,youcancongurevarioussettingsof theserver.NetworkCongurationpagewillautomatically showingeneral,thistaballowsaccessingthefollowing items:
•Alerts
•MouseMode
•Network
•SMTP
•Users
•BMCSensor
•Date/TimeandNTPServerSetting
•SSLCerticate
RemoteControl
Byclickingthistab,youcanaccesstheremoteconsole andcontrolthepowerstatusoftheserver.Ingeneral,this taballowsaccessingthefollowingitems:
•ConsoleRedirection
•ServerPowerControl
•OtherControl
MaintenanceByclickingthistab,youcanentermaintainmode.Under
thismode,youcanupdatethermware.Ingeneral,this taballowsaccessingthefollowingitems:
•EnterUpdateMode
GroupControlByclickingthistab,controlseveralBMCsatthesame
timecanberealized.Y oucanaddhostintotheBMC controlgroup.
LanguagesByclickingthistab,youcanselecttheneededlanguage.
ThelanguagesprovidedatpresentareChineseand English.
ThefourtabsonthehorizontalmenuenableyoutobrowseintheWebconsoleoftheThinkServerRemote ManagementModule.Eachtabhasonesub-menu(ontheleftsideofthebrowser).Formoreinformation aboutthespecicfeaturesofitemsinthesub-menu,seeChapter6“ThinkServerRemoteManagement ModuleWebconsoleoptions”onpage15
.
Thehorizontaltoolbaronthetopofthehomepageandtheleftpaneonthebrowserhavethefollowing buttons:HELP,RefreshPageandLogout.Byclickingthesebuttons,youcantaketherelevanttaskslisted inthefollowingtable.
ButtonFeatures
HELP
Byclickingthisbutton,youcanviewthebriefdescription aboutcurrentpageontherightpaneofthebrowser.By clickingthe“X”onthetoprightofthepane,youcan closethehelppane.
RefreshPage
Byclickingthisbutton,youcanrefreshthecurrentWeb page,includingallthedatashownonthepage.
Chapter4.ThinkServerRemoteManagementquickstart9
Page 16
ButtonFeatures
LogoutByclickingthisbutton,youcanterminatethecurrentWeb
consolesession. Note:IftheRemoteConsole(KVM)windowisactive,it willcloseautomaticallywhenloggingout.Afterlogging out,theWebconsolewillbebacktotheloginscreen.
Onlinehelp
InWebconsoleuserinterface,speciconlinehelpisprovidedforeachpage.Moreinformationabouta certaintopicoroptions,clickHELPtoviewtheonlinehelp.Thehelppanelontherightcanonlybeviewed whentheonlinehelpisavailable.
LogoutThinkServerRemoteManagementModule
ByclickingLogout,youcanlogoutthecurrentuser,andbacktotheloginpage.
Note:AutomaticTimeout:IftheWebconsoledetectsnouseractivitywithin15minutes,thecurrent
sessionwillbeautomaticallyterminated.IftheuserhasopenedtheKVMremoteconsolewindow,then theWebsessionwillnotautomaticallytimeout.Aftertheautomatictimeouthappens,iftheusertriesto takethenextoperation,thesystemwillinformtheuserthatlogonagainisneededifhewantstocontinue toaccesstheWebconsole.
10ThinkServerRD230andRD240RemoteManagementUserGuide
Page 17
Chapter5.Remoteconsole(KVM)operation
Theremoteconsoleistheredirectionscreen,keyboardandmouseoftheremotehostsystem(the ThinkServerRemoteManagementModulehasbeeninstalledonit).Ifthereisaneedtousetheremote consoleofthemanagedhostsystem,makesurethattheserverhasJava*runtimeenvironmentplug-in.
Whentheremoteconsoleisstarted,anewwindowwillbeopened,showingthescreenofthehostsystem. Operatingtheremoteconsoleisjustlikeanadministratorissittingonfrontofthescreenoftheremote system.Thismeansthattheusercanusethekeyboardandmouseasheusuallydoes.
Note:PayattentionthatifthehostoperationsystemisWindows2003,setthedisplayresolutionunder 1280*1024(excluding).
Startredirectionconsole
Theremoteconsoleistheredirectionkeyboard,videoandmouseoftheremotehostsystem(theThinkServer RemoteManagementModulehasbeeninstalledonit).
Step1.ClickConsoleRedirectioninthispagetostarttheredirectionwindowforremoteconsoleKVM.
Step2.ByclickingJavaConsole,youcanstarttheredirectionconsoleandcarryoutremotemanagement
forserver.
Step3.Apop-upwindowwillbeshownandbegintodownloadJavanetworkbootprotocolJviewer.jnlp
documentafteryouclickJavaConsole.Andthen,theJavaapplicationsfortheimplementof remoteconsolewillbedownloaded.
Notes:
•BeforetheJNLPdocumentisbooted,JavaRuntimeEnvironment(JRE)V6.0Update13or higherversionmustbesetupontheclient.
•Theclientbrowsermustallowshowingthepop-upwindowsfromtheIPaddressofThinkServer RemoteManagementModule.
ThisremoteconsolewindowisaJavaAppletforcreatingtheTCPconnectionstotheThinkServer RemoteManagementModule.TheprotocolovertheseconnectionsisauniqueKVMprotocol, ratherthanHTTPorHTTPS.ThisprotocoldedicatedportforKVMis#7578,port#5120forCD-ROM CD-ROMmediaredirectionandport#5123foroppy/USBmediaredirection.Y ourlocalnetwork environmentmustallowcreatingtheseconnections.Thatistosay,ifyouhaveaprivateintranet, thesetupsofrewallandNetworkAddressT ranslation(NA T)mustbeconguredaccordingly.
Mainwindow
Whentheremoteconsoleisstarted,themainwindowofremoteconsolewillappear.
Theremoteconsoleshowsthescreenoftheremoteserver.Operatingtheremoteconsoleisjustlikeyouare infrontoftheremoteserver.Theresponsespeedmaybealittledelay,dependingonthebandwidthand delaybetweentheThinkServerRemoteManagementModuleandtheremoteconsole.
Menubaroftheremoteconsole
Thereisamenubaronthetopoftheremoteconsolewindow.Youcanviewthestatusoftheremoteconsole andcongurethesetupforlocaleremoteconsolethroughtheitemsonthemenubar.
©CopyrightLenovo2010
11
Page 18
Thefollowingsectiondescribesthefeaturesofeachcontrol.
Videomenuoftheremoteconsole
ByclickingtheVideooptiononthecontrolbaroftheremoteconsole,youcanopenthevideomenuof remoteconsole.Withthismenu,youcantakethefollowingoperations:
StartRedirection:Resumetheredirectionsofkeyboard,videoandmouseaftersuspend.Theshortcut keyisAlt+S.
StopRedirection:Pausetheredirectionsofkeyboard,videoandmouse,andthentheremoteconsole windowwillpausethecurrentlyupdatingprocess.TheshortcutkeyisAlt+T .
Restart:Restarttheredirection.TheshortcutkeyisAlt+R.
FullScreen:Switchbetweenthewindowmodeandfullscreenoftheremoteconsole.
Exit:Closetheremoteconsole.
Keyboardmenuoftheremoteconsole
ByclickingKeyboard,youcanopenthekeyboardmenucontainingrelevanttaskoptions.Withthismenu, youcantakethefollowingoperations:
HoldCtrl/Alt/Windowskeys:Allowsimulatingtopressthesespecialkeysontheremotekeyboard.On thelocalkeyboard,thesespecialkeyswillbecarriedoutthroughlocaloperatingsystem,ratherthan transfertoremoteoperationsystem.
Alt+Ctrl+Del:IssueAlt+Ctrl+Delcommandtoremoteoperationsystem.
Note:WhentheremoteoperatingsystemisRedHat5.3andswitchbetweenthegraphicalinterfaceand textualinterfaceiscarriedout,selectHoldLeftCtrlKey+HoldLeftAltKeytoswitchinterface.Thisswitch canbefromgraphicalinterfacetotextualinterface,andthenbacktographicalinterface.However,this operationcanbedoneonlyonce.Ifthetextualinterfaceisdirectlyswitchedtographicalinterface,then onemoreswitchisnotallowed.Ifyouneedtotaketheaboveoperationsagain,youneedtocancelthe selectedmenuandthenselectagain.
Mousemenuoftheremoteconsole
ByclickingMouse,youcanopenthemousemenucontainingrelevanttaskoptions.Thereisaoptionin themousesub-menu:
SyncCursor:Thisoptionisusedforswitchingthecursorappearancesintheremoteconsolewindow.It willnothaveimpactonthecursorintheremotesystem.TheshortcutkeyisAlt+M.
Optionmenuoftheremoteconsole
ByclickingOptions,youcanopenthemenucontainingrelevanttaskoptions.Y oucanadjusttheVideo settingbasedonyourneeds.
Devicemenuoftheremoteconsole
ClickDevicetoopenthedevicemenuwhichincludesrelevanttaskoptions.Themenuoptionsallow startingorstoppingtheremotemediaredirection.
RedirectCDROM/RedirectISO:ThisallowsyoutoredirectthelocalCD-ROM/DVDDriversorISO imagesinthelesystemoflocalclienttovirtualCD-ROMdevicesintheremotesystems.
RedirectFloppy/USBKey/RedirectFloppy/USBKeyImage:Thisallowsyoutoredirectthelocal oppydriver,localUSBKeyDriverortheIMGlesforoppydisktothevirtualoppydevicesinthe remotesystem.
12ThinkServerRD230andRD240RemoteManagementUserGuide
Page 19
Thesevirtualdevicescanread,write(providingthepropertyisnotreadonly)andboot,whicharesimilarwith anyotherCD-ROMsoroppiesintheremotesystem.Butonlywhencertainmediaredirectionsareactive, thesevirtualdevicesareavailableintheremoteoperatingsystemorBIOSsettingmenu.Thesettingisvalid afterremotesystemresetoritispower-onorpower-off.Thesedeviceswillnotdisappearfromtheremote systemuntiltherelevantcheckboxesintheremoteconsolewindowarecleared.
Note:ThiskindofvirtualdevicesarenotlimitedtothenormalsizeofoppyorCD-ROM.Theycanbeas largeastheredirectingdevicesorles.Duringtheinstallationofremoteoperatingsystem(theoppydrivers mayberequired),theUSBKeyDriverscanberedirectedtothevirtualoppydevices(ratherthantheUSB devices)inordertoallowloadingthecustomdevicedrivers.
Statusbaroftheremoteconsole
Thestatusbaratthebottomoftheremoteconsoleisusedtoindicatethestatusoftheremoteconsole. Whenbrowsingthemenuoptions,thisstatusbarwillautomaticallyshowthedetailsofalloptions.
Chapter5.Remoteconsole(KVM)operation13
Page 20
14ThinkServerRD230andRD240RemoteManagementUserGuide
Page 21
Chapter6.ThinkServerRemoteManagementModuleWeb consoleoptions
ThissectiondescribeseverypageofWebconsoleandeachpageisdividedintoseveralpartscorresponding separatelytothefourtabsonthehorizontaltoolbar.Ineachpart,therearedetailillustrationsand introductionstoeachmenuoptionintheleftmenu.
Notes:
•Therstmenuitemofeachtabisdefaultpagewhichwillautomaticallyappearwhenselectingthe correspondingtab.
•ClicktheHELPbuttonontherighthorizontaltoolbar,andtheWebconsolewillshowtherelevant informationofeachpage.
Systeminformation
Bydefault,thehomepageofThinkServerRemoteManagementModuleshowsthesysteminformationpage includinggeneralinformationofthesystem.Formoredetails,seethesectionbelow.
ViewSystemInformation
TheSystemInformationpageshowsthesummaryofthegeneralsysteminformation.
TheSystemInformationpageprovidesthefollowingserverinformation:
InformationDescription
DevicePowerStatusIndicatethedevicepowerstatus(On/Off).
Note:ThisindicatestheBMCstatus.
FirmwareRevision
TherevisionofBMCFirmware.
AuxFirmwareRevision
BMCAuxFirmwareRevision.
BuildTime
DateandtimeofbuildingBMCFirmware.
ServerHealth
TheServerHealthpageshowsthedatarelatedtotheserver'shealth,suchassensorreadingsandevent logs.ClicktheServerHealthtabtoshowthispage.Bydefault,thistabwillautomaticallyopenthesensor readingpage.
ViewSensorReadings
TheSensorReadingspageshowsthesystemsensorinformationincludingreadingsandstatus.
Thetablebelowliststheavailableoptionsonthispage:
Option
TaskDescription
TheSensorSelectiondrop-downlistbox
Usedtoselectthetypesofsensorreadingsthatareshown onthelists.Thedefaultsetupistoshowallsensors.
SensorReadingslist
Usedtoshowthenames,statusandreadingsofthe selectedsensors.
©CopyrightLenovo2010
15
Page 22
Option
TaskDescription
ShowThresholdsbuttonClickittoopenthelistandshowtheassignedvalueof
thethresholdsatthesametime.Fromthis,youcansee CT,NCandNRvalueoftheselectedsensor.Youcan movethedisplaywindowfromlefttorightbythescroll baratthebottomofthepage.
HideThresholdsbutton
Clickitandbacktotheinitialscreenandhidethresholds atthesametime.
Refresh
Clickittorefreshtheselectedsensorreadings.
ViewEventLog
TheEventLogpageshowstheeventlogs.
Thegurebelowliststheavailableoptionsonthispage:
Option
TaskDescription
EventLogCategorydrop-downlist
Usedtoselecttheeventlogcategoriesshownonthelist.
EventLoglist
Usedtoshowthenames,statusandreadingsofthe selectedsensors.ItincludesalistofeventswithID, timestamp,sensorname,sensortypeanddescription.
ClearEventLogbuttonClickittocleartheeventlog.
Congurationofsettings
TheCongurationpageisusedtocongurenetwork,usersandalerts.
Thefollowingserver'smanagementoptionsareincluded:
•Alerts
•MouseMode
•Network
•SMTP
•Users
•BMCSensor
•Date/TimeandNTPServerSetting
•SSLCerticate
Alerts
Youcanusethisfunctiontomodifyordeletethealertsettings,orsendatestalerttothedestination. TheAlertspagelistsallthecongurablealertsincludingconguredalertssettingwhichcontainthealert levelanddestinationaddress.
Step1.Ifyouneedtomodifythealertsettings,youcanselectanalertandclickModifytocongureit.
Step2.Makesettingstotheavailableoptionsonthispage:
16ThinkServerRD230andRD240RemoteManagementUserGuide
Page 23
Option
TaskDescription
AlertT ypedrop-downmenuItisusedtoselectthealerttypesshownonthelist.
Availableoptions:SNMPTrapande-mail.
EventSeveritydrop-downmenu
Itisusedtoselectthealertseverityshownonthelist.
DestinationIPThisoptionisonlyavailablewhentheAlertT ypeis
SNMPTrap.AnditisusedtosettheSNMPaddress ofalertdestination.
EmailAddressThisoptionisonlyavailablewhentheAlertT ypeis
Email.Anditisusedtosetthee-mailaddressof alertdestination.
Subject
ThisoptionisonlyavailablewhentheAlertT ypeis Email.Anditisusedtosetthee-mailsubjectof alertdestination.
MessageThisoptionisonlyavailablewhentheAlertT ypeis
Email.Anditisusedtosetthee-mailmessageof alertdestination.
Step3.Aftersettingthealerts,clickSavebuttontoactivatethesettingsandlistthemonthealertlists.
CongurationofMouseModeSetting
Step1.ClickMouseModetoopentheMouseModeSettingwindow.Theredirectionconsolecanuseone
ofthemethodsmentionedbelowtosetthemousemode(fromlocalwindowstoremotescreens):
AbsoluteMode:SelectingtheAbsoluteModewillsendtheabsolutepositionoflocalmouseto server.ThismodeissuitableforWindowsoperatingsystem.
RelativeMode:SelectingtheRelativeModewillsendtherelativemovementoflocalmouse toserver.ThismodeissuitableforLinuxoperatingsystem.
Step2.ClickSavetoapplytheselectedmode.
CongurationofNetworkSettings
TheNetworkSettingspageisusedtocongurethenetworksettings.Itincludesthefollowingoptions:
Automatic(ObtainanIPaddressautomatically):AutomaticallyobtaintheIPaddress(useDHCP).
Manual(UsethefollowingIPaddresses):ManuallycongureIPaddress.
Thetablebelowliststheavailableoptionsonthispage:
Option
TaskDescription
MACAddressTheMACaddressofthedevices(ReadOnly)
IPAddress
SelectthetypeoftheIPaddressbyradiobutton.If youwanttocongurethestaticIP ,entertherequested address,subnetmaskandgatewayintothegivenelds.
Notes:
•TheIPaddressiscomposedoffournumbersand separatedbyperiod(.).Forexample,“xxx.xxx.xxx.xxx”.
•“xxx”fallsinbetween0and255.
•Therst“xxx”shouldnotbe0.
SavebuttonClickittosavethechanges.
Chapter6.ThinkServerRemoteManagementModuleWebconsoleoptions17
Page 24
MakeSMTPSetting
ThispageisusedtosetthesourceaddressforsendingSMTPe-mail.
Step1.EntertheIPaddressfortheSMTPmailserver.
Step2.ClickSave.
Usermanagement
TheUserListpagelistsallusersincludingconguredusers,withnetworkpermission.Theoptionsincluded inthispageareusedtoconguretheIPMIusersforserversandtheirpermissions.
Toaddanewuser,selectablankrowfromlistandclickAddUser.
Tomodifyauser,selectthisuserfromlistandclickModifyUsertomodifytherelevantsettings.
Todeleteauser,selectthisuserfromlistandclickDeleteUser.
Note:Theuserlenovoandthreecannotbemodiedordeleted.
BMCsensorsettings
Inthispage,youcanselectDirectmonitoringonI2CbustomonitorBMCsensormodedirectlyfrom I2CbusandgettheBMCsensoraddress,orselectExternalBMCmonitoringtomanuallysettheBMC I2Cbusaddress.
Note:ItisrecommendedthatusersshouldnotmodifyBMCsensorsettings.
Date/TimeandNTPServerSetting
Thispagecanbeusedtosettheinternalreal-timeclockofRemoteManagementModule.Youcanmanually adjusttheclockorusetheNTPclockservertosettheinternalclockofRemoteManagementModulein accordancewiththesystemclock.OncetheRemoteManagementModulepowersdown,youneedtoreset theclock.Toavoidthisproblem,youcanautomaticallysettheinternalclocktoaNTPtimeserverof thecurrentUTCtime.
Note:TheNTPservercongurationwillbeblankifIPautocongurationisconguredthrougheitherBOOTP orDHCPintheNetworksettings,becausetheBOOTPorDHCPserverdoesnotprovidetheNTPserver information.
CongureSSLUpload
ThisSSLUploadpagecanbeusedtouploadSSLcerticateandprivatekeyinordertogetaccessto thedeviceinsafemode.
Step1.SelecttherequiredSSLcerticateandclicktheUploadbutton.
Step2.Thenyouwillbepromptedtoconrmthecerticateuploading.Thesystemwillgiveyounotice
afterthesuccessofuploadingthecerticate.AftertheSSLcerticateissuccessfullyuploaded, youwillbepromptedtorebootthesystem.
RemoteControl
TheRemoteControlpageallowsyoutoexecutethefollowingremoteoperationontheserver:
•ConsoleRedirection
•ServerPowerControl
18ThinkServerRD230andRD240RemoteManagementUserGuide
Page 25
ConsoleRedirection
TheConsoleRedirectionpagewillautomaticallyselecttheRemoteConsoleoptionbydefault.Y oucanopen remoteconsoleKVMredirectionwindowfromthispage.
ClickJavaConsolebuttontostarttheredirectionconsoleandremotelymanagetheserver.
Note:BeforeyoustartJNLPle,theclientmustbeinstalledwithJavaRuntimeEnvironment(JRE)V6.0 Update13orhigher.
ServerPowerControl
TheServerPowerControlpageshowstheserverpowerstatus.
Youcanperformthefollowingpowercontroloperations:
Option
TaskDescription
ResetServer
Iftheoptionisselected,youcanhardresetthehostwith thepower-off.
PowerOffServer-Immediate
Iftheoptionisselected,thesystemcanbeturnedoff immediately.
PowerOffServe-OrderlyShutdown
Iftheoptionisselected,thesystemcansavethesettings andshutdown.
PowerOnServer
Iftheoptionisselected,theservercanbepoweredon.
PowerCycleServer
Iftheoptionisselected,theservercanbepoweredoff immediatelyandthenpoweredonafterasecond.
PerformAction
Clickandthesystemcanperformtheselectedremote powercommand.
Note:AllpowercontrolactioncanbeperformedbyBMCandrespondedimmediately.Itisrecommendedtoshut downthesystemthroughKVMinterfaceorotherinterfacesbeforetheinitializationpoweraction.
OtherControl
YoucanclicktheChassisLocateLEDbuttontocontrolthestatusofthechassisIDlight,includingfour controloptions:Off(extinguishimmediately),15Seconds(extinguishafter15seconds),60Seconds (extinguishafter60seconds)andAlwaysOn(normallyon).Selectoneofthem,andthenclicktheChassis LocateLEDbuttontoperformthecorrespondingoperation.
IfyouwanttocleartheCMOS,youcanclickClearCMOStoperformtheoperation.
YoucanclickLockLocalPanel/UnlockLocalPaneltolockorunlockthelocalconsoleforremotely controlling.
Maintenance
YoucanclicktheEnterUpdateModebuttontoenterthemaintenancemodeinwhichyoucanupdate thermware.
Note:OnceyouclicktheEnterUpdateModebuttonandenterthemaintenancemode,theremoteserver willrebootafterexitthemode.
ThermwareofRemoteManagementModulecanbeupdatedtoaddnewfeatures.Thermwareupdate lescanbesenttoyouthroughe-mailordownloadedthroughtheLenovo®Website.
Chapter6.ThinkServerRemoteManagementModuleWebconsoleoptions19
Page 26
Warning:Firmwareupdateisirreversible,andmeanwhileitneedstospendafewminutes.Intheprocedure ofupdating,donotoperateontheremotepower.
Toupdatethermware,dothefollowing:
Step1.Downloadthermwareupdatele.
Step2.ClicktheBrowsebuttonontherightsideoftheUploadpagetoselectthecorrespondingFWle.
Step3.ClicktheUploadbutton,thermwarelewillbesenttotheRemoteManagementModule.During
theuploading,thedevicewillcheckthevalidityofthermwareleandwhetherthetransmission erroroccurs.Ifanyerrorisidentied,theuploadwillbeterminated.
Step4.Iftheuploadiscompletedsuccessfully,theupdatermwarewindowwilldisplaythecurrently
runningrmwareversionandthenewlyuploadedrmwareversion.ClicktheUploadbutton toupdatermware.
Waitforaminuteafterrmwareisupdatedandthebrowserloginpageisre-opened,entertheusername andpasswordtologinagain.
GroupControl
Thisfeatureallowsyoutocontrolmulti-hostBMCatsametime.ByclickingAddHost,youcanaddthe hosttotheBMCcontrolgroups.
Languages
Inthismenu,youcanselectlanguagesneeded.ThelanguagescurrentlyofferedareChineseandEnglish.
20ThinkServerRD230andRD240RemoteManagementUserGuide
Page 27
AppendixA.FAQ
1.Q:LogonRemoteManagementModulefailed.
A:Checkyourusernameandpassword.
2.Q:RemoteManagementModulecannotbeconnected.
A:Checkthehardware(1).WhetherthehostonwhichtheRemoteManagementModuleresidesis connectedtopowersupplyornot?(2).Checkyournetworkconguration(IPaddress,router,etc).
©CopyrightLenovo2010
21
Page 28
22ThinkServerRD230andRD240RemoteManagementUserGuide
Page 29
AppendixB.Notices
Lenovomaynotoffertheproducts,services,orfeaturesdiscussedinthisdocumentinallcountries.Consult yourlocalLenovorepresentativeforinformationontheproductsandservicescurrentlyavailableinyour area.AnyreferencetoaLenovoproduct,program,orserviceisnotintendedtostateorimplythatonlythat Lenovoproduct,program,orservicemaybeused.Anyfunctionallyequivalentproduct,program,orservice thatdoesnotinfringeanyLenovointellectualpropertyrightmaybeusedinstead.However,itistheuser's responsibilitytoevaluateandverifytheoperationofanyotherproduct,program,orservice.
Lenovomayhavepatentsorpendingpatentapplicationscoveringsubjectmatterdescribedinthis document.Thefurnishingofthisdocumentdoesnotgiveyouanylicensetothesepatents.Y oucansend licenseinquiries,inwriting,to:
Lenovo(UnitedStates),Inc. 1009ThinkPlace-BuildingOne Morrisville,NC27560 U.S.A. Attention:LenovoDirectorofLicensing
LENOVOPROVIDESTHISPUBLICA TION“ASIS”WITHOUTWARRANTYOFANYKIND,EITHEREXPRESS ORIMPLIED,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFNON-INFRINGEMENT , MERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE.Somejurisdictionsdonotallow disclaimerofexpressorimpliedwarrantiesincertaintransactions,therefore,thisstatementmaynotapply toyou.
Thisinformationcouldincludetechnicalinaccuraciesortypographicalerrors.Changesareperiodically madetotheinformationherein;thesechangeswillbeincorporatedinneweditionsofthepublication. Lenovomaymakeimprovementsand/orchangesintheproduct(s)and/ortheprogram(s)describedinthis publicationatanytimewithoutnotice.
Theproductsdescribedinthisdocumentarenotintendedforuseinimplantationorotherlifesupport applicationswheremalfunctionmayresultininjuryordeathtopersons.Theinformationcontainedinthis documentdoesnotaffectorchangeLenovoproductspecicationsorwarranties.Nothinginthisdocument shalloperateasanexpressorimpliedlicenseorindemnityundertheintellectualpropertyrightsofLenovo orthirdparties.Allinformationcontainedinthisdocumentwasobtainedinspecicenvironmentsandis presentedasanillustration.Theresultobtainedinotheroperatingenvironmentsmayvary.
Lenovomayuseordistributeanyoftheinformationyousupplyinanywayitbelievesappropriatewithout incurringanyobligationtoyou.
Anyreferencesinthispublicationtonon-LenovoWebsitesareprovidedforconvenienceonlyanddonotin anymannerserveasanendorsementofthoseWebsites.ThematerialsatthoseWebsitesarenotpartof thematerialsforthisLenovoproduct,anduseofthoseWebsitesisatyourownrisk.
Anyperformancedatacontainedhereinwasdeterminedinacontrolledenvironment.Therefore,theresult obtainedinotheroperatingenvironmentsmayvarysignicantly.Somemeasurementsmayhavebeen madeondevelopment-levelsystemsandthereisnoguaranteethatthesemeasurementswillbethesame ongenerallyavailablesystems.Furthermore,somemeasurementsmayhavebeenestimatedthrough extrapolation.Actualresultsmayvary.Usersofthisdocumentshouldverifytheapplicabledatafortheir specicenvironment.
©CopyrightLenovo2010
23
Page 30
Trademarks
Lenovo,theLenovologo,andThinkServeraretrademarksofLenovointheUnitedStates,othercountries,or both.
JavaandallJava-basedtrademarksaretrademarksofSunMicrosystems,Inc.intheUnitedStates,other countries,orboth.
InternetExplorer,MicrosoftandWindowsaretrademarksoftheMicrosoftgroupofcompanies.
LinuxisatrademarkofLinusT orvaldsintheUnitedStates,othercountries,orboth.
Othercompany,product,orservicenamesmaybetrademarksorservicemarksofothers.
24ThinkServerRD230andRD240RemoteManagementUserGuide
Page 31
Page 32
Loading...