Lenovo ThinkPad P1 Gen 3, ThinkPad X1 Extreme Gen 3 User Manual
P1 Gen 3 / X1 Extreme Gen 3
User Guide
Read this first
Before using this documentation and the product it supports, ensure that you read and understand the
following:
• Appendix A “Important safety information” on page 59
• Safety and Warranty Guide
• Setup Guide
First Edition (August 2020)
© Copyright Lenovo 2020.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.
Contents
About this documentation . . . . . . . . iii
Chapter 1. Meet your computer. . . . . 1
Front . . . . . . . . . . . . . . . . . . . . 1
Base . . . . . . . . . . . . . . . . . . . . 3
Left . . . . . . . . . . . . . . . . . . . . 4
Right . . . . . . . . . . . . . . . . . . . . 5
Bottom . . . . . . . . . . . . . . . . . . . 6
Features and specifications . . . . . . . . . . . 7
Statement on USB transfer rate . . . . . . . . 8
Chapter 2. Get started with your
computer . . . . . . . . . . . . . . . . . 9
Get started with Windows 10 . . . . . . . . . . 9
Windows account . . . . . . . . . . . . . 9
Windows user interface . . . . . . . . . . 10
Windows label . . . . . . . . . . . . . 11
Connect to networks. . . . . . . . . . . . . 11
Connect to the wired Ethernet . . . . . . . 11
Connect to Wi-Fi networks. . . . . . . . . 11
Connect to a cellular network (for selected
models) . . . . . . . . . . . . . . . . 12
Use Lenovo Vantage . . . . . . . . . . . . . 12
Interact with your computer . . . . . . . . . . 13
Use the keyboard shortcuts . . . . . . . . 13
Use the TrackPoint pointing device . . . . . 15
Use the trackpad . . . . . . . . . . . . 16
Use the multi-touch screen . . . . . . . . 18
Use the Intelligent Cooling feature . . . . . . 20
Use the Cool and Quiet on lap feature . . . . 21
Use multimedia . . . . . . . . . . . . . . . 21
Use audio . . . . . . . . . . . . . . . 21
Connect to an external display . . . . . . . 21
Use Lenovo Pen Pro (for selected models) . . . . 22
Chapter 3. Explore your computer . . 25
Manage power . . . . . . . . . . . . . . . 25
Check the battery status and temperature. . . 25
Charge the battery . . . . . . . . . . . . 25
Maximize the battery life . . . . . . . . . 25
Set power button behaviors . . . . . . . . 25
Set the power plan . . . . . . . . . . . . 26
Transfer data . . . . . . . . . . . . . . . . 26
Connect to a Bluetooth-enabled device. . . . 26
Use a media card . . . . . . . . . . . . 26
Airplane mode . . . . . . . . . . . . . . . 27
Use the factory color calibration feature (for
selected models) . . . . . . . . . . . . . . 27
Purchase options . . . . . . . . . . . . . . 28
Chapter 4. Secure your computer
and information . . . . . . . . . . . . 29
Lock the computer . . . . . . . . . . . . . 29
Use passwords . . . . . . . . . . . . . . . 29
Password types . . . . . . . . . . . . . 29
Set, change, and remove a password . . . . 31
Use Power Loss Protection function. . . . . . . 32
Use the fingerprint reader (for selected models) . . 32
Use face authentication (for selected models) . . . 33
Use firewalls and antivirus programs. . . . . . . 33
Chapter 5. Configure advanced
settings. . . . . . . . . . . . . . . . . 35
UEFI BIOS . . . . . . . . . . . . . . . . . 35
What is UEFI BIOS . . . . . . . . . . . . 35
Enter the UEFI BIOS menu. . . . . . . . . 35
Navigate in the UEFI BIOS interface . . . . . 35
Change the startup sequence . . . . . . . 35
Set the system date and time. . . . . . . . 36
Update UEFI BIOS . . . . . . . . . . . . 36
RAID . . . . . . . . . . . . . . . . . . . 36
What is RAID . . . . . . . . . . . . . . 36
Storage drive requirements for RAID levels . . 36
Enter the Intel RST configuration utility . . . . 37
Create RAID volumes. . . . . . . . . . . 37
Delete RAID volumes . . . . . . . . . . . 37
Reset storage drives to non-RAID . . . . . . 38
Rebuild RAID 1 volumes. . . . . . . . . . 38
Recovery information . . . . . . . . . . . . 38
Restore system files and settings to an earlier
point . . . . . . . . . . . . . . . . . 39
Restore your files from a backup . . . . . . 39
Reset your computer . . . . . . . . . . . 39
Use advanced options . . . . . . . . . . 39
Windows automatic recovery. . . . . . . . 39
Create and use a recovery USB device . . . . 39
Install Windows 10 and drivers . . . . . . . . . 40
Chapter 6. CRU replacement . . . . . 43
What are CRUs . . . . . . . . . . . . . . . 43
Disable Fast Startup and the built-in battery. . . . 43
Replace a CRU . . . . . . . . . . . . . . . 44
Base cover assembly . . . . . . . . . . . 44
© Copyright Lenovo 2020 i
Wireless WAN card (for selected models) . . . 45
Memory module . . . . . . . . . . . . . 47
M.2 solid-state drive . . . . . . . . . . . 49
Coin-cell battery. . . . . . . . . . . . . 51
Chapter 7. Help and support . . . . . 53
Frequently asked questions . . . . . . . . . . 53
Error messages . . . . . . . . . . . . . . . 54
Beep errors . . . . . . . . . . . . . . . . 55
Self-help resources . . . . . . . . . . . . . 56
Call Lenovo . . . . . . . . . . . . . . . . 57
Before you contact Lenovo . . . . . . . . 57
Lenovo Customer Support Center . . . . . . 57
Purchase additional services. . . . . . . . . . 58
Appendix A. Important safety
information . . . . . . . . . . . . . . . 59
Appendix B. Accessibility and
ergonomic information . . . . . . . . 73
Appendix C. Supplemental
information about the Linux operating
system . . . . . . . . . . . . . . . . . 77
Appendix D. Compliance and TCO
Certified information. . . . . . . . . . 79
Appendix E. Notices and
trademarks . . . . . . . . . . . . . . . 93
ii P1 Gen 3 / X1 Extreme Gen 3 User Guide
About this documentation
• Illustrations in this documentation might look different from your product.
• Depending on the model, some optional accessories, features, and software programs might not be
available on your computer.
• Depending on the version of operating systems and programs, some user interface instructions might not
be applicable to your computer.
• Documentation content is subject to change without notice. Lenovo makes constant improvements on the
documentation of your computer, including this User Guide. To get the latest documentation, go to
pcsupport.lenovo.com
• Microsoft
®
makes periodic feature changes to the Windows® operating system through Windows Update.
.
As a result, some information in this documentation might become outdated. Refer to Microsoft resources
for the latest information.
https://
© Copyright Lenovo 2020 iii
iv P1 Gen 3 / X1 Extreme Gen 3 User Guide
Chapter 1. Meet your computer
Front
For non-touch model
For touch model
© Copyright Lenovo 2020 1
1. Microphones* Capture or record sound.
Emit infrared (IR) light.
2. Infrared LED*
3. Camera with IR function*
Note: Do not block the light-emitting diode (LED). Otherwise, the IR function
might not work.
• Take pictures or record videos by clicking Camera from the Start menu. The
indicator next to the camera is on when the camera is in use.
• Log in to your computer with face authentication. See “Use face authentication
(for selected models)” on page 33.
• If you use other apps that support photographing, video chatting, and video
conference, the camera starts automatically when you enable the camerarequired feature from the app.
4. ThinkShutter*
5. Camera*
6. Multi-touch screen
* for selected models
Slide ThinkShutter to cover or uncover the camera lens. It is designed to protect
your privacy.
• Take pictures or record videos by clicking Camera from the Start menu. The
indicator next to the camera is on when the camera is in use.
• If you use other apps that support photographing, video chatting, and video
conference, the camera starts automatically when you enable the camerarequired feature from the app.
Enable you to use your computer with simple touch gestures. See “Use the multitouch screen” on page 18.
2
P1 Gen 3 / X1 Extreme Gen 3 User Guide
Base
Press to turn on the computer or put the computer to sleep mode.
1. Power button
2. Fingerprint reader
3. Trackpad
4. TrackPoint
®
pointing device
To turn off the computer, open the Start menu, click
Shut down.
The indicator in the power button shows the system status of your computer.
• Blinking for three times: The computer is initially connected to power.
• On: The computer is on.
• Off: The computer is off or in hibernation mode.
• Blinking rapidly: The computer is entering sleep or hibernation mode.
• Blinking slowly: The computer is in sleep mode.
Log in to your computer with enrolled fingerprints. See “Use the fingerprint reader
(for selected models)” on page 32.
Perform finger touch and all the functions of a traditional mouse. See “Use the
trackpad” on page 16.
Perform all the functions of a traditional mouse. See “Use the TrackPoint pointing
device” on page 15.
Power, and then select
Chapter 1. Meet your computer 3
Left
1. Power connector
2. Thunderbolt
(USB-C™)
3. HDMI™ connector
4. Audio connector
™
3 connectors
Connect to ac power through an ac power adapter.
• Charge your computer.
• Charge USB-C compatible devices with the output voltage and current of 5 V
and 3 A.
• Transfer data at Thunderbolt 3 speed, up to 40 Gbps.
• Connect to an external display:
– USB-C to VGA: 1900 x 1200 pixels, 60 Hz
– USB-C to DP: 3840 x 2160 pixels, 60 Hz
• Connect to USB-C accessories to help expand your computer functionality. To
purchase USB-C accessories, go to
Note: When the battery power is below 10%, the connected USB-C accessories
might not work correctly.
Connect to a compatible digital audio device or video monitor, such as an HDTV.
The HDMI connector on your computer supports the HDMI 2.0 standard by
default. If you connect an external display to your computer through the HDMI
connector with an HDMI 1.4 cable, the external display might not work. In this
case, use a qualified HDMI 2.0 cable instead of an HDMI 1.4 cable.
• Connect headphones with a 3.5-mm (0.14-inch) and 4-pole plug to listen to the
sound from the computer.
• Connect a headset with a 3.5-mm (0.14-inch) and 4-pole plug to listen to the
sound from the computer or talk with others.
https://www.lenovo.com/accessories.
Note: This connector does not support standalone external microphones.
4 P1 Gen 3 / X1 Extreme Gen 3 User Guide
Right
1. Nano-SIM-card tray* Use the Nano Subscriber Identity Module (SIM) card to connect to a wirelessWAN network. See “Connect to a cellular network (for selected models)” on page
12.
2. Media-card slot Insert a flash media card for data access or storage. See “Use a media card” on
page 26.
3. USB 3.2 connector Gen 1
4. Always On USB 3.2 connector
Gen 1
5. Security-lock slot
* for selected models
Connect a USB-compatible device, such as a USB keyboard, USB mouse, USB
storage device, or USB printer.
With the Always On USB feature enabled, the Always On USB 3.2 connector Gen
1 can charge a USB-compatible device when the computer is on, off, in sleep
mode, or in hibernation mode.
Notes:
• By default, Always On USB is enabled and Charge in Battery Mode is
disabled in UEFI BIOS.
• When the computer is off or in hibernation mode, and Charge in Battery Mode
is disabled in UEFI BIOS, ensure that you have connected the computer to ac
power.
To enable the Always On USB feature:
1. Enter the UEFI BIOS menu. See “Enter the UEFI BIOS menu” on page 35.
2. Click Config ➙ USB ➙ Always On USB to enable the Always On USB
feature.
Lock your computer to a desk, table, or other fixtures through a compatible
security cable lock. See “Lock the computer” on page 29.
Chapter 1. Meet your computer 5
Bottom
1. Emergency-reset hole
If the computer stops responding and you cannot turn it off by pressing the power
button, reset your computer:
1. Disconnect your computer from ac power.
2. Insert a straightened paper clip into the hole to cut off power supply
temporarily.
3. Connect your computer to ac power and then turn on your computer.
2. Speakers
Enable you to experience high-quality sound.
6 P1 Gen 3 / X1 Extreme Gen 3 User Guide
Features and specifications
• Width: 361.8 mm (14.2 inches)
• Depth: 245.7 mm (9.7 inches)
Dimensions
• Thickness:
– Non-touch models: 18.4 mm (0.72 inches)
– Touch models: 18.7 mm (0.74 inches)
Maximum heat output
(depending on the model)
Power source (ac power
adapter)
Microprocessor
Memory
Storage device
Display
Keyboard
• 135 W (460 Btu/hr)
• 170 W (580 Btu/hr)
• Sine-wave input at 50 Hz to 60 Hz
• Input rating of the ac power adapter: 100 V to 240 V ac, 50 Hz to 60 Hz
To view the microprocessor information of your computer, right-click the Start
button and then click System.
• Double data rate 4 (DDR4) dual inline memory modules (DIMMs)
• M.2 solid-state drive
• Brightness control
• Color display with In-Plane Switching (IPS) or Organic Light-Emitting Diode
(OLED) technology
• Display size: 396.24 mm (15.6 inches)
• Display resolution: 1920 x 1080 pixels or 3840 x 2160 pixels
• Multi-touch technology*
• Hybrid Graphics Processing Unit (GPU) or integrated GPU
• Function keys
• Six-row keyboard with backlight
• Trackpad
• TrackPoint pointing device
Connectors and slots
• ac power connector
• Audio connector
• HDMI connector
• Media-card slot
• Nano-SIM-card tray*
• Two USB 3.2 connectors Gen 1 (including one Always On USB 3.2 connector
Gen 1)
• Two Thunderbolt 3 connectors (USB-C)
Chapter 1. Meet your computer 7
Security features
Wireless features
• Face authentication*
• Fingerprint reader
• Password
• Security-lock slot
• ThinkShutter*
• Trusted Platform Module (TPM)
• Bluetooth
• Wireless LAN
• Wireless WAN*
Others
• Camera*
• Microphones
* for selected models
Statement on USB transfer rate
Depending on many factors such as the processing capability of the host and peripheral devices, file
attributes, and other factors related to system configuration and operating environments, the actual transfer
rate using the various USB connectors on this device will vary and will be slower than the data rate listed
below for each corresponding device.
USB device Data rate (Gbit/s)
3.2 Gen 1 / 3.1 Gen 1
3.2 Gen 2 / 3.1 Gen 2
3.2 Gen 2 × 2
5
10
20
8 P1 Gen 3 / X1 Extreme Gen 3 User Guide
Chapter 2. Get started with your computer
Get started with Windows 10
Learn the basics of Windows 10 and start working with it right away. For more information about Windows
10, see the Windows help information.
Windows account
A user account is required to use the Windows operating system. It can either be a Windows user account or
a Microsoft account.
Windows user account
When you start Windows for the first time, you are prompted to create a Windows user account. This first
account you created is of the “Administrator” type. With an Administrator account, you can create additional
user accounts or change account types by doing the following:
1. Open the Start menu and select Settings ➙ Accounts ➙ Family & other users.
2. Follow the on-screen instructions.
Microsoft account
You can also log in to the Windows operating system with a Microsoft account.
To create a Microsoft account, go to the Microsoft sign-up page at
screen instructions.
With a Microsoft account, you can:
• Enjoy one-time signing in if you are using other Microsoft services, such as OneDrive, Skype, and Outlook.
com.
• Sync personalized settings across other Windows-based devices.
https://signup.live.com and follow the on-
© Copyright Lenovo 2020 9
Windows user interface
1. Account
2. Documents
3. Pictures
4. Settings
5. Power
6. Start button
7. Windows Search
8. Task View
9. Windows notification area
10. Battery status icon
11. Network icon
12. Action center
Change account settings, lock the computer, or sign out from the current account.
Open the Documents folder, a default folder to save your received files.
Open the Pictures folder, a default folder to save your received pictures.
Launch Settings.
Shut down, restart, or put the computer into sleep mode.
Open the Start menu.
Type what you are looking for in the search box and get search results from your
computer and the Web.
Display all opened apps and switch among them.
Display notifications and status of some features.
Display power status and change battery or power settings. When your computer
is not connected to ac power, the icon changes to
Connect to an available wireless network and display the network status. When
connected to a wired network, the icon changes to
Display the latest notifications from apps and provide quick access to some
features.
Open the Start menu
• Click the Start button.
• Press the Windows logo key on the keyboard.
.
.
Access Control Panel
• Open the Start menu and click Windows System ➙ Control Panel.
10
P1 Gen 3 / X1 Extreme Gen 3 User Guide
• Use Windows Search.
Launch an app
• Open the Start menu and select the app you want to launch.
• Use Windows Search.
Windows label
Your computer might have a Windows 10 Genuine Microsoft label affixed to its cover depending on the
following factors:
• Your geographic location
• Edition of Windows 10 that is preinstalled
Go to
https://www.microsoft.com/en-us/howtotell/Hardware.aspx for illustrations of the various types of
Genuine Microsoft labels.
• In the People’s Republic of China, the Genuine Microsoft label is required on all computer models
preinstalled with any version of Windows 10.
• In other countries and regions, the Genuine Microsoft label is required only on computer models licensed
for Windows 10 Pro.
The absence of a Genuine Microsoft label does not indicate that the preinstalled Windows version is not
genuine. For details on how to tell whether your preinstalled Windows product is genuine, refer to the
information provided by Microsoft at
https://www.microsoft.com/en-us/howtotell/default.aspx.
There are no external, visual indicators of the Product ID or Windows version for which the computer is
licensed. Instead, the Product ID is recorded in the computer firmware. Whenever a Windows 10 product is
installed, the installation program checks the computer firmware for a valid, matching Product ID to complete
the activation.
In some cases, an earlier Windows version might be preinstalled under the terms of the Windows 10 Pro
license downgrade rights.
Connect to networks
Your computer helps you connect to the world through a wired or wireless network.
Connect to the wired Ethernet
To connect your computer to a local network, connect a Lenovo USB-C to Ethernet Adapter to the
Thunderbolt 3 connectors (USB-C), then connect an Ethernet cable to the Lenovo USB-C to Ethernet
Adapter.
The Lenovo USB-C to Ethernet Adapter is available as an option and shipped with some computer models.
You can purchase one from Lenovo at
https://www.lenovo.com/accessories.
Connect to Wi-Fi networks
1. Click the network icon in the Windows notification area. A list of available wireless networks is displayed.
2. Select a network available for connection. Provide required information, if needed.
Chapter 2. Get started with your computer 11
Connect to a cellular network (for selected models)
If your computer has a wireless wide area network (WAN) card and a nano-SIM card installed, you can
connect to a cellular data network and get online using the cellular signal.
Note: The cellular service is provided by authorized mobile service carriers in some countries or regions.
You must have a cellular plan from a service carrier to connect to the cellular network.
To establish a cellular connection:
1. Turn off the computer.
2. Insert a straightened paper clip into the hole in the tray
computer. Install a nano-SIM card into the tray
2 with the metal contacts facing downward. Insert the
tray into the nano-SIM-card slot until it is secured in place
step.
1 . The tray ejects. Then, slide the tray out of the
3 . If a nano-SIM card is installed, skip this
3. Turn on the computer.
4. Click the network icon in the Windows notification area, and then select the cellular network icon
from
the list.
5. Provide required information, if needed.
Use Lenovo Vantage
The preinstalled Lenovo Vantage is a customized one-stop solution to help you maintain your computer with
automated updates and fixes, configure hardware settings, and get personalized support.
Access Lenovo Vantage
Open the Start menu and click Lenovo Vantage. You also can type Lenovo Vantage in the search box.
To download the latest version of Lenovo Vantage, go to Microsoft Store and search by the app name.
Key features
Lenovo Vantage enables you to:
• Know the device status easily and customize device settings.
• Download and install UEFI BIOS, firmware, and driver updates to keep your computer up-to-date.
• Monitor your computer health, and secure your computer against outside threats.
• Scan your computer hardware and diagnose hardware problems.
12
P1 Gen 3 / X1 Extreme Gen 3 User Guide
• Look up warranty status (online).
• Access User Guide and helpful articles.
Notes:
• The available features vary depending on the computer model.
• Lenovo Vantage makes periodic updates of the features to keep improving your experience with your
computer. The description of features might be different from that on your actual user interface.
Interact with your computer
Your computer provides you various ways to navigate the screen.
Use the keyboard shortcuts
The special keys on the keyboard help you work more easily and effectively.
https://support.lenovo.com/us/en/videos/vid500145
1. Windows logo key
2. Caps Lock key
3. F1–F12 function keys
Open the Start menu.
For information about using this key with other keys, see the Windows help
information.
Switch the letter case between the upper case and lower case.
When the key indicator is on, you can type uppercase letters.
Invoke the special function printed as an icon on each key or standard function.
To choose whether to invoke the special function or standard function:
1. Go to Control Panel and view by Large icons or Small icons.
2. Click Keyboard or Lenovo - Keyboard Manager and select the option of
your preference.
Chapter 2. Get started with your computer 13
Switch the function of the F1–F12 keys between the standard function and special
function printed as an icon on each key.
When the Fn Lock indicator is on:
• Press F1-F12 to use the standard function.
• Press Fn+F1-F12 to use the special function.
When the Fn Lock indicator is off:
• Press Fn+F1-F12 to use the standard function.
• Press F1-F12 to use the special function.
Mute or unmute the speakers.
When the key indicator is on, the speakers are muted.
If you mute the speakers and turn off your computer, the speakers remain muted
when you turn on your computer.
Decrease the speaker volume.
Increase the speaker volume.
Mute or unmute the microphones.
When the key indicator is on, the microphones are muted.
Darken the computer display.
Brighten the computer display.
Manage external displays.
Enable or disable the built-in wireless features.
Open or collapse the notification center.
Answer incoming calls.
This function only works with some apps, such as Skype for Business 2016 and
Microsoft Teams 1.0.
By default, the function works with Skype for Business 2016. You can change the
default setting on Lenovo Vantage.
Decline incoming calls.
This function only works with some apps, such as Skype for Business 2016 and
Microsoft Teams 1.0.
By default, the function works with Skype for Business 2016. You can change the
default setting on Lenovo Vantage.
Note: You can also press F11 to hang up ongoing calls on Skype for Business
2016.
Invoke the function defined by yourself.
You can define different functions for the F12 key on Lenovo Vantage.
14 P1 Gen 3 / X1 Extreme Gen 3 User Guide
Open the Snipping Tool program.
Fn+Spacebar
Fn+B
Fn+K
Fn+P
Fn+S
Fn+4
Fn+Left arrow key Equal the Home key.
Fn+Right arrow key Equal the End key.
Switch between different keyboard backlight statuses if your computer supports
keyboard backlight.
Equal the Break key on a conventional external keyboard.
Equal the ScrLK or Scroll Lock key on a conventional external keyboard.
Equal the Pause key on a conventional external keyboard.
Equal the SysRq key on a conventional external keyboard.
Put the computer to sleep mode. To wake up the computer, press Fn or the power
button.
Use the TrackPoint pointing device
The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as
pointing, clicking, and scrolling.
Use the TrackPoint pointing device
1. Pointing stick
Use your index finger or middle finger to apply pressure to the pointing-stick nonslip cap in any direction
parallel to the keyboard. The pointer on the screen moves accordingly but the pointing stick itself does not
move. The higher the pressure applied, the faster the pointer moves.
2. Left-click button
Press to select or open an item.
3. Right-click button
Chapter 2. Get started with your computer 15
Press to display a shortcut menu.
4. Middle button
Press and hold the dotted middle button while applying pressure to the pointing stick in the vertical or
horizontal direction. Then, you can scroll through the document, Web site, or apps.
Disable the TrackPoint pointing device
The TrackPoint pointing device is active by default. To disable the device:
1. Open the Start menu, and then click Settings ➙ Devices ➙ Mouse.
2. Follow the on-screen instructions to disable TrackPoint.
Replace the pointing-stick nonslip cap
Note: Ensure that the new cap has grooves
a .
Use the trackpad
The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform
all the pointing, clicking, and scrolling functions of a traditional mouse.
Use the trackpad
1. Left-click zone
16
P1 Gen 3 / X1 Extreme Gen 3 User Guide
Press to select or open an item.
You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action.
2. Right-click zone
Press to display a shortcut menu.
You also can tap anywhere on the surface of the trackpad with two fingers to perform the right-click action.
Use the touch gestures
Tap
Tap anywhere on the trackpad with one finger to select or open an
item.
Two-finger tap
Tap anywhere on the trackpad with two fingers to display a shortcut
menu.
Two-finger scroll
Put two fingers on the trackpad and move them in the vertical or
horizontal direction. This action enables you to scroll through the
document, Web site, or apps.
Two-finger zoom out
Put two fingers on the trackpad and move them closer together to
zoom out.
Two-finger zoom in
Put two fingers on the trackpad and move them farther apart to zoom
in.
Chapter 2. Get started with your computer 17
Swipe three fingers up
Put three fingers on the trackpad and move them up to open the task
view to see all your open windows.
Swipe three fingers down
Put three fingers on the trackpad and move them down to show the
desktop.
Notes:
• When using two or more fingers, ensure that you position your fingers slightly apart.
• Some gestures are not available if the last action was done from the TrackPoint pointing device.
• Some gestures are only available when you are using certain apps.
• If the trackpad surface is stained with oil, turn off the computer first. Then, gently wipe the trackpad
surface with a soft and lint-free cloth moistened with lukewarm water or computer cleaner.
For more gestures, see the help information of the pointing device.
Disable the trackpad
The trackpad is active by default. To disable the device:
1. Open the Start menu, and then click Settings ➙ Devices ➙ Touchpad.
2. In the Touchpad section, turn off the Touchpad control.
Use the multi-touch screen
If your computer display supports the multi-touch function, you can navigate the screen with simple touch
gestures.
Note: Some gestures might not be available depending on the app you use.
Tap once
• From the Start menu: Open an app or item.
• From the desktop: Select an app or item.
• In an open app: Perform an action such as Copy, Save, and
Delete, depending on the app.
Tap twice quickly
Open an app or item from the desktop.
18 P1 Gen 3 / X1 Extreme Gen 3 User Guide
Tap and hold
Open a shortcut menu.
Slide
Scroll through items, such as lists, pages, and photos.
Drag an item to the location you want
Move an object.
Move two fingers closer together
Zoom out.
Move two fingers farther apart
Zoom in.
Swipe in from the right edge
Open the action center to see your notifications and quick actions.
Chapter 2. Get started with your computer 19
Swipe in from the left edge
View all your open windows in task view.
• Swipe downwards shortly from the top edge (for full-screened
app or when your computer is in the tablet mode)
Show a hidden title bar.
• Swipe in from the top edge to the bottom edge (when your
computer is in the tablet mode)
Close the current app.
Tips
• Turn off the computer before cleaning the multi-touch screen.
• Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the
multi-touch screen. Do not apply solvents to the cloth.
• The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any
metallic object on the screen, which might damage the touch panel or cause it to malfunction.
• Do not use fingernails, gloved fingers, or inanimate objects for input on the screen.
• Regularly calibrate the accuracy of the finger input to avoid a discrepancy.
Use the Intelligent Cooling feature
The Intelligent Cooling feature enables your computer to work in the following modes:
Quiet mode: the quietest fan noise
Balanced mode: balanced performance and fan noise
Performance mode: better performance and normal fan noise
Ultra-performance mode: the best performance and louder fan noise
on ac power
To select the preferred mode:
1. Click the battery status icon in the Windows notification area.
2. Move the slider to select the preferred mode.
on battery power
20
P1 Gen 3 / X1 Extreme Gen 3 User Guide
Use the Cool and Quiet on lap feature
The Cool and Quiet on lap feature helps cool down your computer when it becomes hot. Any extended
contact with your body, even through clothing, could cause discomfort. If you prefer using your computer on
the lap, it is recommended that you enable the Cool and Quiet on lap feature in UEFI BIOS:
1. Enter the UEFI BIOS menu. See “Enter the UEFI BIOS menu” on page 35.
2. Click Config and turn on the Cool and Quiet on lap mode switch.
Use multimedia
Use your computer for business or entertainment with the built-in components (camera, speakers, and audio
features) or connected external devices (an external projector, monitor, and HDTV).
Use audio
To enhance your audio experience, connect speakers, headphones, or a headset with a 3.5-mm (0.14-inch),
4-pole plug to the audio connector.
Change the sound settings
1. Go to Control Panel and view by category.
2. Click Hardware and Sound ➙ Sound.
3. Change the settings as you prefer.
Connect to an external display
Connect your computer to a projector or a monitor to give presentations or expand your workspace.
Connect to a wired display
1. Connect the external display to an appropriate video connector on your computer, such as the
Thunderbolt 3 connector (USB-C) or the HDMI connector.
2. Connect the external display to an electrical outlet.
3. Turn on the external display.
If your computer cannot detect the external display, right-click a blank area on the desktop, and then click
Display settings ➙ Detect.
Supported resolution
The following table lists the supported maximum resolution of the external display.
Connect the external display to Supported resolution
the Thunderbolt 3 connector
(USB-C)
the HDMI connector
• For hybrid GPU models: Up to 5120 x 2160 pixels / 60 Hz
• For integrated GPU models: Up to 4396 x 2304 pixels / 60 Hz
• For hybrid GPU models: Up to 4096 x 2160 pixels / 60 Hz
• For integrated GPU models: Up to 4096 x 2160 pixels / 60 Hz
Connect to a wireless display
To use a wireless display, ensure that both your computer and the external display support the Miracast
feature.
Chapter 2. Get started with your computer 21
®
• Open the Start menu, and then click Settings ➙ Devices ➙ Bluetooth & other devices ➙ Add
Bluetooth or other device. In the Add a device window, click Wireless display or dock. Then, follow the
instructions on the screen.
• Click the action center icon
in the Windows notification area and click Connect. Select the wireless
display and follow the on-screen instructions.
Set the display mode
Press
or and then select a display mode of your preference.
• PC screen only: Displays the video output only on your computer screen.
Note: Depending on the situation, you might see Disconnect, PC screen only, Computer only, or
Disconnect projector.
• Duplicate: Displays the same video output on both your computer screen and an external display.
• Extend: Extends the video output from your computer display to an external display. You can drag and
move items between the two displays.
• Second screen only: Displays the video output only on an external display.
Note: Depending on the situation, you might see Projector only or Second screen only.
If you show programs using DirectDraw or Direct3D
®
in full-screen mode, only the main display shows the
video output.
Change display settings
1. Right-click a blank area on the desktop and select Display settings.
2. Select the display that you want to configure.
3. Change display settings of your preference.
You can change the settings for both the computer display and the external display. For example, you can
define which one is the main display and which one is the secondary display. You also can change the
resolution and orientation.
Note: If you set a higher resolution for the computer display than the external display, only part of the screen
can be displayed on the external display.
Use Lenovo Pen Pro (for selected models)
Depending on the model, your computer might come with a Lenovo Pen Pro (referred to as pen). The pen
enables you to write and draw in a natural manner. This section introduces the basic use of the pen. For more
information, refer to the documentation of the pen.
Notes:
• The color of the pen might vary by country or region. Depending on the model, the pen might look slightly
different from the illustrations in this topic.
• The pen is not waterproof. Keep the pen away from water and excessive moisture.
• The pen contains pressure sensors. Apply an appropriate amount of pressure when writing on the screen.
Do not subject the pen to shock or vibration.
• The pen does not work when the multi-touch function is disabled in the UEFI BIOS.
22
P1 Gen 3 / X1 Extreme Gen 3 User Guide
Pen overview
1 Top pen button: Hold the top pen button for at least three seconds to enable Bluetooth pairing on the
pen.
2 LED indicator: The LED indicates the following status:
• Charging status
– Solid amber: charging
– Solid green: fully charged
• Battery power status
– Blinking amber: battery power is less than 20%
– Off: no battery power or battery power is more than 20%
• Bluetooth pairing status
– Green, blinking once every second: pairing
– Green, blinking five times quickly in two seconds: paired
– Green, blinking once: the top pen button is pressed or double pressed
3 USB-C connector: To charge the pen, connect the pen to a USB-C connector of the computer with a
USB-C cable.
4 Top barrel button: To right-click, hold the top barrel button and tap the screen in supported applications.
5 Bottom barrel button: To erase texts or drawings, hold the bottom barrel button to erase the object in
supported applications.
Notes:
• The default function of each barrel button might vary in different apps.
• To customize the barrel button functions, use Lenovo Pen Settings. If Lenovo Pen Settings is not installed
on your computer, download and install the latest WinTab driver from
https://support.lenovo.com.
6 Pen tip: To click, tap on the screen with the tip. To double-click, tap twice.
Chapter 2. Get started with your computer 23
Pair the pen
1. Enable Bluetooth pairing on the pen by pressing and holding the top of the pen for at least three
seconds until the LED indicator flashes in green.
2. Enable Bluetooth pairing on your computer to discover and pair the pen. See “Connect to a Bluetoothenabled device” on page 26. The pen is discoverable as Lenovo Pen Pro.
After pairing, press or double-press the top pen button to access more functions. To customize the top pen
button functions, use Lenovo Pen Settings or open the Start menu
and tap Settings ➙ Devices ➙ Pen &
Windows Ink ➙ Pen shortcuts.
Store the pen
The pen is delivered with a pen holder. To store the pen on the computer:
1. Insert the pen holder into either USB 3.2 connector on the computer.
2. Insert the pen into the pen holder in any ways as shown.
24 P1 Gen 3 / X1 Extreme Gen 3 User Guide
Loading...