Page 1
Version 1.1 2009.7
User Guide
Lenovo
IdeaCentre Q700 Series
31039306
31039306_Q700_UG_FM_EN_V1.1.indd1 1 2009.7.3 3:05:02 PM
Page 2
Important Safety Information
Before using this manual, it is important that you read and understand all of
the related safety information for this product. Refer to the Safety and Warranty
Guide you received with this product for the latest safety information. Reading
and understanding this safety information reduces the risk of personal injury and
damage to your product.
Danger: Beware of extremely hazardous or lethal situations.
Attention: Beware of possible damage to programs, devices, or data.
Note: Pay attention to this important information.
© Copyright Lenovo 2007, 2009.
31039306_Q700_UG_EN_V1.1.indd 1 2009.7.3 3:09:40 PM
Page 3
31039306_Q700_UG_EN_V1.1.indd 2 2009.7.3 3:09:40 PM
Page 4
1
Contents
Contents
Important Safety Information
Chapter 1
Using the Computer Hardware .............................. 1
1.1 Front view of the computer chassis .........................................2
1.2 Rear view of the computer chassis ..........................................
3
1.3 Computer stand instruction .....................................................
4
1.4 Connecting your computer .....................................................
5
1.5 Using the Remote Control .....................................................
11
Chapter 2 Using the Rescue System .................................... 15
2.1 Installing Drivers and Software Shipped with Your Computer ...16
2.2 OneKey Recovery ..................................................................17
2.3 File Management ...................................................................18
2.4 OneKey Antivirus ...................................................................20
Chapter 3 Using the Computer Software ............................. 23
3.1 Power2Go — Burning Discs .................................................24
3.2 WinDVD
................................................................................25
3.3 Trend Micro Internet Security .................................................26
3.4 Media Show ..........................................................................28
Chapter 4 System Maintenance and Recovery .................... 29
4.1 Restoring the System ............................................................30
4.2 Backup status and configuration ...........................................
30
4.3 Cleaning Up the Disk .............................................................
30
4.4 Checking For and Correcting Disk Errors ...............................
31
4.5 Defragmenting the Disk(s) ......................................................
31
4.6 Performing Daily Maintenance Tasks ......................................
31
31039306_Q700_UG_EN_V1.1.indd 1 2009.7.3 3:09:40 PM
Page 5
2
Contents
Chapter 5 Troubleshooting and Confirming Setup .............. 33
5.1 Troubleshooting Display Problems .........................................34
5.2 Troubleshooting Audio Problems ...........................................
35
5.3 Troubleshooting Software Problems
.......................................35
5.4 Troubleshooting Problems with Optical Drives and
Hard Disks .............................................................................36
5.5 Special considerations for troubleshooting Windows .............
37
31039306_Q700_UG_EN_V1.1.indd 2 2009.7.3 3:09:40 PM
Page 6
1
2
3
4
5
Chapter
This chapter contains the following
topics:
ÿ
Computer hardware introduction
ÿ
Information on computer connections
Note: The descriptions in this chapter may
vary from your computer setup, depending
on computer models and configurations.
User Guide
1
Using the Computer Hardware
31039306_Q700_UG_EN_V1.1.indd 1 2009.7.3 3:09:41 PM
Page 7
2
User Guide
1.1 Front view of the computer chassis
Attention: Ensure that none of the air vents on the computer are blocked.
Blocked air vents can lead to overheating problems.
Power button
IEEE 1394 port
Optical drive slot USB ports (4)
LED indicators (3) and IR receiver Microphone socket
Memory card reader Headphone socket
31039306_Q700_UG_EN_V1.1.indd 2 2009.7.3 3:09:43 PM
Page 8
3
User Guide
1.2 Rear view of the computer chassis
HDMI port Audio line-out sockets (2)
VGA port TV-tuner port (selected models only)
eSATA port Audio line-in socket
USB ports (4) Microphone port
S-Video port (selected models only) Audio line-out port
Ethernet port Power socket
SPDIF port
31039306_Q700_UG_EN_V1.1.indd 3 2009.7.3 3:09:45 PM
Page 9
4
User Guide
1.3 Computer stand instruction
The computer chassis can be placed in a vertical position.
P
R
O
M
M
C
P
R
O
M
M
C
Note: Make sure to install the base stand before placing the chassis in a
vertical position.
The computer chassis can also be placed in a horizontal position.
• Attach the four sticky pieces as in the diagram below.
• Lay the chassis down on its side as in the diagram below.
P
R
O
M
M
C
P
R
O
M
M
C
31039306_Q700_UG_EN_V1.1.indd 4 2009.7.3 3:09:48 PM
Page 10
5
User Guide
1.4 Connecting your computer
Use the following information when connecting your computer.
• Look for the small port/socket icons on the back of your computer. Match the
cable ends to the icons.
• If your computer cables and ports/sockets panels have color-coded ports or
sockets, match the color of the cable end with the color of the port or socket.
Note: Your computer might not have all of the ports and sockets that are
described in this section.
1.4.1 Connect the keyboard cable to the appropriate keyboard
port (USB port). (Not all models are equipped with a
keyboard.)
1.4.2 Connect the mouse cable to the appropriate mouse port
(USB port). (Not all models are equipped with a mouse.)
1.4.3 Connect the monitor cable to the monitor port on the
computer.
• If you have a Video Graphics Array (VGA) Standard monitor, connect the
cable to the port as shown.
31039306_Q700_UG_EN_V1.1.indd 5 2009.7.3 3:09:48 PM
Page 11
6
User Guide
• If you have an HDMI monitor, your computer must have an adapter installed
that supports the HDMI monitor. Connect the cable to the port as shown.
1.4.4 If you have audio devices, use the following information
to connect them.
Audio line-in This socket receives audio signals from an external audio
device, such as a stereo system.
Audio line-out This socket sends audio signals from the computer to
external devices, such as powered stereo speakers.
Microphone Use this socket to attach a microphone to your computer
when you want to record sound or if you use speechrecognition software. This socket might be located on the
front of the computer.
Headphone Use this socket to attach headphones to your computer
when you want to listen to music or other sounds without
disturbing anyone. This socket may be located on the front
of the computer chassis.
31039306_Q700_UG_EN_V1.1.indd 6 2009.7.3 3:09:50 PM
Page 12
7
User Guide
1.4.5 If you have powered speakers with an adapter:
(This picture is only a sketch for guidance, it does not necessarily show actual
speakers)
a. Connect the cable that runs between the speakers, if necessary. On some
speakers, this cable is permanently attached.
b. Connect the adapter cable to the speaker, if necessary. On some speakers, this
cable is permanently attached.
c. Connect the speakers to audio line-out port on the computer.
d. Connect the adapter to the power source.
1.4.6 If you have powered speakers without an adapter:
(This picture is only a sketch print, it is not necessarily meant to be a true
representation of the speakers)
a. Connect the cable that runs between the speakers, if necessary. On some
speakers, this cable is permanently attached.
b. Connect the cable to the speaker, if necessary. On some speakers, this cable is
permanently attached.
c. Connect the speakers to the audio line-out port on the computer.
31039306_Q700_UG_EN_V1.1.indd 7 2009.7.3 3:09:51 PM
Page 13
8
User Guide
d. Connect the plug to the power source.
Note: Some models are not equipped with external speakers.
1.4.7 Connect any additional devices that you have. Your
computer might not have all the ports/sockets shown.
1
39
4
USB Use this port to attach a device that requires a USB connection.
S-Video Use this port to attach a television set that has an S-Video port.
TV-Tuner Only supported on systems with optional TV tuner card.
Ethernet Use this port to attach the computer to an Ethernet-type local
area network (LAN).
IEEE 1394 This port offers connection to several different types of
consumer electronic products, including digital audio devices
and scanners.
31039306_Q700_UG_EN_V1.1.indd 8 2009.7.3 3:09:52 PM
Page 14
9
User Guide
1.4.8 Connect the power cables properly to earthed electrical
outlets.
1.4.9 If your computer is equipped with a Memory Card Reader
Port, it is able to read/write data from/to the following:
SD, MMC, Memory stick, Memory stick pro
31039306_Q700_UG_EN_V1.1.indd 9 2009.7.3 3:09:53 PM
Page 15
10
User Guide
1.4.10 Keyboard and Mouse, wired (not all models are
equipped with a keyboard and mouse).
L
V
T
—— Volume down
—— Volume up
—— Mute
LVT —— On the right side of your keyboard, you will find the LVT key. Kindly note
that this key is disabled because the LVT program is not installed on
your computer.
F2 —— Your computer has the Lenovo Rescue System installed. To learn more
about this program, turn on the computer, and when the Lenovo logo
appears, press the F2 key and the Lenovo Rescue System will open.
31039306_Q700_UG_EN_V1.1.indd 10 2009.7.3 3:09:54 PM
Page 16
11
User Guide
1.5 Using the Remote Control (not all models are
equipped with remote control).
The remote control (not shipped with all computer models) works with the remote
control receiver on the chassis. Adjust the angle of the remote control correctly.
31039306_Q700_UG_EN_V1.1.indd 11 2009.7.3 3:09:54 PM
Page 17
12
User Guide
Buttons on the remote control:
Button Description
Up
Down
Left
Right
OK Confirm
Back
Details
Guide (this function is not available in Microsoft Windows
operating systems.)
Shows live TV on the currently selected channel.
Displays the Recorded TV page in Windows Media
Center.
Play
Pause
Stop
Record
Fast Forward
Rewind
Skip
Replay
31039306_Q700_UG_EN_V1.1.indd 12 2009.7.3 3:09:57 PM
Page 18
13
User Guide
Starts Windows Media Center.
Adjusts volume up/down
Previous/next channel
Mute
DVD menu
Power supply (standby)
0~9
Number (and/or Letter) buttons
#
# key
*
*
key
CLEAR
Clear
ENTER
Enter
31039306_Q700_UG_EN_V1.1.indd 13 2009.7.3 3:09:58 PM
Page 19
14
User Guide
31039306_Q700_UG_EN_V1.1.indd 14 2009.7.3 3:09:58 PM
Page 20
1
2
3
4
5
Chapter
Using the Rescue System
This chapter contains the following
topics:
ÿ
Rescue System
ÿ
Internet application instructions
Attention: Using this program will result in
a loss of data.
• You can reset the C drive of the computer
to the factory default settings or to the
last system backup status using
OneKey
Recovery. With this operation, all of the
existing data on drive C will be lost, but the
content and format of the other partitions of
the hard disk drive will remain unchanged.
• If you want to install an operating system
with the Windows Vista Recovery DVD and
back it up with
OneKey Recovery, you must
format the C partition in NTFS format and
install the operating system on the C partition.
Otherwise, the OneKey Recovery system
cannot run.
User Guide
15
31039306_Q700_UG_EN_V1.1.indd 15 2009.7.3 3:09:59 PM
Page 21
16
User Guide
Note about the service partition:
The files and relevant data used by the rescue system are saved in the service
partition. Deleting this partition will make the rescue system unusable. For more
detailed information, see the following instructions:
By selecting Control Panel → Management Tools → Computer Management
→
Disk Management, you can see the service partition, which must not be
deleted.
Note: The recovery files and relevant data used by the rescue system are
saved in the service partition. If the service partition is deleted or damaged
by someone other than authorized Lenovo service technicians, Lenovo
shall not in any way be liable for any losses arising therefrom.
2.1 Installing Drivers and Software Shipped with Your
Computer
The installation drivers and software functions in the rescue system provide a
way for the user to conveniently install the drivers and software shipped with the
computer. The rescue system can automatically install all its drivers and software
shipped with the computer, or it can selectively install some of the drivers and
software as required by the user.
Method 1: Automatic Installation
Turn on the computer. When the Lenovo logo appears, press the F2 key on the
keyboard to start the Rescue System, then select Install drivers and software.
Follow the screen prompts to install the drivers and software. Click Install to start
installing the drivers and software.
The system will restart. After the system has restarted, the installation process will
continue until completion.
Method 2: Manual Installation
From Windows, click Start → All Programs → Lenovo → Drivers and
Application Installation.
After starting the procedure, install all the drivers and software manually according
to the prompts.
31039306_Q700_UG_EN_V1.1.indd 16 2009.7.3 3:09:59 PM
Page 22
17
User Guide
Notes:
1. It is recommended that you do not install software which is already on
the computer.
2. Before accessing the operating system, ensure that the Drivers and
Application software has been installed automatically. After that,
the manual installation function can be used. To start the manual
installation, restart the operating system, a prompt dialog will pop up
asking whether or not to continue automatically installing. Click Cancel.
2.2 OneKey Recovery
Main functions:
1. If a Windows operating system is preinstalled on your computer, the OneKey
Recovery function works in the following way:
Recover Factory Backup: Recover the computer system partition (drive C) to
the original factory default settings.
Note: After this operation, all existing data in the system partition will
be lost and other partitions on the disk will remain unchanged. In order
to prevent loss of data, be sure to back up important data before this
operation.
2. If a Windows operating system is not pre-installed on your computer, the
OneKey Recovery function will provide the following two functions:
Create base backup: In the absence of the factory backup, the Lenovo
OneKey Recovery system enables you to back up all data on the current
system partition manually after installing the operating system and standard
software. Upon completion of the base backup, you can use the Recover
Base Backup function to recover the system partition to the original default
settings.
Note: Create base backup can only be used once. After the user has
performed a base backup, this operation cannot be used again. It is
recommended that this operation is performed after installing the Windows
operating system and the drivers and software shipped with the computer.
Otherwise, the backup space is insufficient.
Recover base backup:
This operation recovers the computer system partition
(drive C) to the base backup state.
31039306_Q700_UG_EN_V1.1.indd 17 2009.7.3 3:10:00 PM
Page 23
18
User Guide
Note: After this operation, all existing data in the system partition will
be lost, but other partitions on the disk will remain unchanged. In order
to prevent loss of data, be sure to back up important data before this
operation.
Note: Do not change the size of partition drive C after the backup
operation. This will ensure that the required space for every recovery
option is available.
Detailed Operation Procedure (example: Recovering Factory Backup):
1. Turn on the computer. When the Lenovo logo appears, press the F2 key on the
keyboard to start the Rescue System, then you can select OneKey Recovery.
2. Select
Recover Factory Backup to start the system recovery function.
Note: System Recovery will overwrite all of the data on drive C. To prevent
loss of data, be sure to back up relevant data before performing system
recovery.
3. Follow the onscreen instructions, and press
E on the keyboard to start recovery
if you are sure you want to recover.
4. Please wait during the process of system recovery. Do not interrupt the
operation during the recovery process.
5. After the system is recovered successfully, the software prompts you to restart
the computer. Restart the computer and enter the system.
2.3 File Management
With the File Management module, you may access the critical data in directories
such as Desktop or My Documents in the system partition (usually drive C) when
the system crashes and is irrecoverable. You may then back up such data to other
partitions or external storage devices.
2.3.1 Launch
Turn on the computer. When the Lenovo logo appears, press the F2 key to launch
Rescue System. Then select File Management.
2.3.2 File Backup
Select the file and folder to be copied in the left dialog box, and select the target
folder and drive letter in the right dialog box.
31039306_Q700_UG_EN_V1.1.indd 18 2009.7.3 3:10:00 PM
Page 24
19
User Guide
Note: The drive letter of the source file must be different from the target
drive letter.
Then click the copy icon.
Wait for the copying process to finish.
Note: Please do wait during the copying process. The time required for
this operation depends on the quantity and size of files you need to copy.
Do not power off the computer, otherwise system files might be corrupted.
2.3.3 Setting a Password
To ensure authentication of the user who is copying the files, the Lenovo file
management function enables you to set a protection password. Users
are unable to access the files in your hard disk drive partitions without passing
through the password authentication procedure. Follow the instructions below:
Single-click the key-shaped icon on the upper right side of the main interface to
configure the password.
The default password is blank.
Set a password when you access the File Backup for the first time. If you don’t
want to set a password, you may simply access the system directly and operate
accordingly.
2.3.4 Search
File management provides a search function, and backs up the searched files.
Input the file or file type to search for, and click the search icon at the bottom to
start searching the files.
Notes:
1. During the process of copying files, do not power off the computer.
Otherwise, files on the hard disk drive may be damaged.
2. The disk partition identifier in the file management interface may fail to
correspond to that in the Windows system. Select operations based on
the directory content.
3. The file copying function cannot be performed within the same partition.
If the source address and the target address of the same partition, the
Copy button is disabled.
31039306_Q700_UG_EN_V1.1.indd 19 2009.7.3 3:10:00 PM
Page 25
20
User Guide
2.4 OneKey Antivirus
The OneKey Antivirus software is independent of the operating system. It can run
general virus scans and also kill viruses. and it can even scan and kill viruses when
Windows cannot start and other antivirus software cannot work as a result of virus
infection.
Therefore, it can restore your computer system when the operating system is
damaged by a virus.
2.4.1 Launch
Turn on the computer. When the Lenovo logo appears, press the F2 key to launch
Rescue System. Then select OneKey Antivirus.
2.4.2 Scan and Kill Viruses
There are two options when scanning and killing viruses:
1) Scan all partitions of the disk consecutively and kill any detected viruses.
2) Scan just the operating system partition (usually drive C) and kill viruses on it.
To perform a scan and kill viruses, do the following:
1. Use Alt plus the optional character or the Tab key to select the option to start
scanning and killing viruses.
2. Wait while the software is scanning and killing viruses. Try to avoid interrupting
the process.
3. If you need to stop scanning or killing viruses in the middle of the process, click
the corresponding stop button to stop the virus scanning/killing process. Click
the corresponding cancel button to continue scanning.
4. The software will report the results of a scan upon completion of the scanning/
killing process, it will list all viruses killed and quarantined.
5. Click the corresponding button to display the files which are infected with
viruses and quarantined.
In the quarantined zone, you can clear, delete and recover infected files.
2.4.3 Update
To ensure that OneKey Antivirus functions normally and is able to detect the latest
viruses, the virus definitions need to be updated regularly.
2.4.3.1 Launch
In the OneKey Antivirus main interface, select the corresponding button to start
31039306_Q700_UG_EN_V1.1.indd 20 2009.7.3 3:10:00 PM
Page 26
21
User Guide
updating virus definitions. Virus definitions can be updated by:
• Downloading the latest virus package online.
• Obtaining the latest virus package from the flash disk.
Select the relevant update option to start the update.
2.4.3.2 Online Update
Depending on the network access mode of the computer, select “ADSL” or “LAN
Connection” in the network connection modes.
1. If you select “ADSL,” input the username and password of the ADSL
connection.
2. If you select “LAN connection,” configure the IP address and proxy server of the
LAN.
a. After the network is configured properly, the software will show that the
network has been configured successfully. Click the OK button to start
updating.
b. Wait until the update process is complete. Try to avoid interruption of the
process.
c. After the virus definitions are updated successfully, the software will show
that the update has been completed successfully.
2.4.3.3 Obtaining the Latest Virus Package from a Flash Disk
1. First, using Windows, make a copy of OneKey Antivirus on a flash disk. Connect
the flash disk to the USB port, and click Start → All Programs → Lenovo →
Download USB update package.
2. Save the latest virus definitions to the flash disk. Creating an update on the flash
disk will not destroy the source file in it.
3. After creating the flash disk, restart the computer and access the
OneKey
Antivirus interface.
4. Select
Obtain the latest virus package from the flash disk, and click the
update icon.
The virus definitions will be updated automatically.
Notes:
1.
OneKey Antivirus does not guarantee to solve all problems caused
by computer viruses. If the problems cannot be solved after you run
OneKey Antivirus, please use other methods to recover the system or
solve the system problems.
2. This software only scans and kills viruses on the hard disk drive
31039306_Q700_UG_EN_V1.1.indd 21 2009.7.3 3:10:00 PM
Page 27
22
User Guide
partitions, not those located on floppy disks, flash disks or CDs. You
can install and use anti-virus software in Windows to scan such media.
3. In the process of cleaning viruses, do not power off the computer.
Otherwise, files on the hard disk drive may be damaged.
31039306_Q700_UG_EN_V1.1.indd 22 2009.7.3 3:10:01 PM
Page 28
1
2
3
4
5
Chapter
Using the Computer Software
This chapter contains the following
topics:
ÿ
Computer software instructions
Note: The interface and functionality of
these features are may vary according to the
actual software that was shipped with the
computer model that you purchased.
User Guide
23
31039306_Q700_UG_EN_V1.1.indd 23 2009.7.3 3:10:02 PM
Page 29
24
User Guide
Note:
The standard product has no installation software for high quality audio and video
players nor a plug-in; though some models may come with audio and video
software, it is not guaranteed that they will support all high quality audio and video
formats. Therefore, if the user needs to play high quality audio and video or CD
material, the user will need to purchase or download software or a plug-in from the
internet that can play the corresponding audio or video files.
Because audio and video files in the market or via the internet do not yet have
uniform production standards, if the user cannot play or smoothly play some of the
audio and video files during normal operation, it does not necessarily mean there is
a hardware or system problem; instead, the user is recommended to consult with
the supplier or manufacturer for problems related to audio and video players, plugins and audio and video files.
This product has been tested for playing high quality audio and video files of the
following specifications: (the actual audio and video performance may be different
according to differences in individual product configuration, software and hardware,
as well as audio and video file formats)
Resolution Video encoding format Bit rate Frame rate
1920x1080 VC-1 11Mbps 24fps
1920x1080 MPEG2 20Mbps 24fps
1920x1080 H.264 12Mbps 24fps
3.1 Power2Go — Burning Discs
(This software can only be used on models with a rewritable optical drive)
Power2Go is the software for disc burning. It provides various burning tools that
enable you to easily store your files on CDs or DVDs.
Power2Go can make common data discs, music discs, video/photo discs and
mixed discs. It also supports disc duplication.
Note: This software does not support the burning of VCD audio or Blu-ray
disc DVDs.
3.1.1 Launch
1. Choose All Programs → Lenovo → Power2Go → Power2GoExpress from
the Start menu to launch the burner program.
31039306_Q700_UG_EN_V1.1.indd 24 2009.7.3 3:10:02 PM
Page 30
25
User Guide
2. The shortcut to launch the burner software is the block icon on the desktop. To
use the burner program, just drag and drop the files to be recorded onto their
appropriate data, music, or video icon.
3.1.2 Starting the Burner Software
1. Choose All Programs → Lenovo → Power2Go → Power2Go from the Start
menu to launch the burner program.
2. Choose a task for the burner from the task list. Then start the burner to record
files.
3. Choose the medium to burn to from the disc type, then click the
OK icon to
access the burner interface.
4. Select the file to be burned from the select source box, and then click the
Add
Files icon to add your files to the disc compilation column. Click the burn icon
to start the burning process.
3.1.3 Disc Utility
The burner also provides utility tools for preparing and processing various CDs and
DVDs, such as the recording of mirror files, erasing of discs, and conversion of
audio.
3.1.4 Help
For more information about using Power2Go, click the Help icon.
3.2 WinDVD
(This software is provided only with computer models
equipped with a Blu-ray optical drive.)
With WinDVD, you can play DVDs and VCDs.
To launch the player:
Select All Programs → InterVideo WinDVD from the Start menu to launch the
player.
Click the “?” icon to obtain more information about WinDVD.
The WinDVD Blu-ray Disc (BD) software can play DVD standard format discs and
Blu-ray format discs with an optical drive.
31039306_Q700_UG_EN_V1.1.indd 25 2009.7.3 3:10:03 PM
Page 31
26
User Guide
The WinDVD player includes the following basic buttons:
— Play
— Move backwards within the current track
— Pause
— Move forward within the current track
— Track list
— Stop
— Go to the previous track
— Eject
— Go to the next track
— Mute
— Volume
3.3 Trend Micro Internet Security
If the Trend Micro Internet Security antivirus software is installed on your
computer, use the following instructions.
Trend Micro Internet Security is a common type of antivirus software. It can scan
and kill viruses and Trojans on the computer.
3.3.1 Using Trend Micro Internet Security
Choose Trend Micro Internet Security in All Programs from the Start menu to
launch the Trend Micro Internet Security antivirus software.
Another option is to right click the Trend Micro Internet Security icon in the
system tray and launch the antivirus software from the pop-up options.
31039306_Q700_UG_EN_V1.1.indd 26 2009.7.3 3:10:03 PM
Page 32
27
User Guide
3.3.2 Scanning for Viruses
In the main Trend Micro Internet Security interface, click the Scan icon to scan
the computer. Upon completion, the software will pop up a system scanning
report, which lists all virus files detected, and you can then quarantine or delete
them as required.
3.3.3 Upgrade
In the main Trend Micro Internet Security interface, click the update icon to
upgrade the software’s virus definitions.
Note: Connect to the Internet before upgrading.
3.3.4 Configuring the Scanning of the Specified Disk
In the main Trend Micro Internet Security interface, select Custom Scan from
“More Options.” You can select the disks that you want to scan in the scan targets
dialog.
3.3.5 Other Protection Functions
Other software settings are available in the toolbar on the left side, including the
level of protection against Trojan viruses, personal network and interconnection
settings, and email settings. Configure them as you require.
3.3.6 Help and Support
For more information on using Trend Micro Internet Security, see Product Help
Information in the Help and Support option. In the help document, you can learn
more about Trend Micro Internet Security operation and settings.
Note: Restart your computer from the prompt dialog box after uninstalling
Trend Micro Internet Security.
31039306_Q700_UG_EN_V1.1.indd 27 2009.7.3 3:10:03 PM
Page 33
28
User Guide
3.4 Media Show
MediaShow is a new and innovative way to view and be creative with your media.
MediaShow lets you be as imaginative as you want to be with the following
functions:
• View your photos and videos
• Edit and add effects to your photos and videos
• Create screen savers and slideshows with your photos
• Create stylish and professional looking movies with your videos
• Upload your photos directly to Flickr
• Email photos and videos directly from MediaShow to your friends
• Create discs with your photos and video
3.4.1 Photos
You can manage your photos in MediaShow via the different creative functions,
there are a variety of editing functions and you have the ability to email your photos
or upload them to Flickr.
3.4.2 Videos
You can manage your videos in MediaShow through the different creative
functions, there are a variety of editing functions as well as the ability to email your
videos.
3.4.3 Create DVD Discs
With this utility, you can create professional looking DVD discs with themes and
menus from your videos and photos. You also can configure your DVD disc
settings.
31039306_Q700_UG_EN_V1.1.indd 28 2009.7.3 3:10:03 PM
Page 34
1
2
3
4
5
Chapter
System Maintenance and
Recovery
This chapter contains the following
topics:
ÿ
Daily Maintenance and Tools Instructions
User Guide
29
31039306_Q700_UG_EN_V1.1.indd 29 2009.7.3 3:10:05 PM
Page 35
30
User Guide
4.1 Restoring the System
The system can develop problems due to erroneous operation or the installation of
additional software. If software problems develop in the originally installed software,
you can restore the system by the using system backup and restoration features.
Note: The existing system settings will change after restoration. Check the
settings of the restored system to ensure they match settings that may be
critical to your needs.
Use the following procedure to restore the software to a known functional level:
1. Click
Start → All Programs → Accessories → System Tools → System
Restore.
2. Choose either the recommended restore point, or select a different recovery
time from the pop-up dialog. Choose the last date when the system was
running properly.
Click
Next to continue.
3. The system will start restoration. When all processes have completed, the
software displays a message informing you that the restore operation has
completed successfully.
4.2 Backup status and configuration
For added security, you can back up the state of your system before you install
additional software, or otherwise modify system settings. To back up your system,
do the following:
1. Click
Start → All Programs → Accessories → System Tools → Backup
status and configuration.
2. Select the location for your backup. Click Next and follow the instructions to
continue.
4.3 Cleaning Up the Disk
Do the following periodically to clean up the disks and help to enhance your
computer’s performance:
1. Click
Start → All Programs → Accessories → System Tools → Disk
Cleanup.
2. Choose the disk you want to clean up.
3. Click the
OK button to start the cleanup process.
31039306_Q700_UG_EN_V1.1.indd 30 2009.7.3 3:10:05 PM
Page 36
31
User Guide
4.4 Checking For and Correcting Disk Errors
To properly maintain your system, you should periodically check for and fix hard
disk errors by doing the following:
1. Right-click the icon for the hard disk drive (HDD) that you want to reorganize,
then select Properties from the pop-up menu.
2. Select the
Tools tab, and then click Check Now.
3. Check your inspection items for the disk and click
Start.
Note: You cannot start error checking until the computer is restarted and
initialized.
4.5 Defragmenting the Disk(s)
Disk fragments are tiny unused storage areas scattered on the disk. The system
cannot directly reutilize these “blank” spaces and system performance can
decrease as system operations usually cause the number of unused storage gaps
to increase. To defragment your disk storage, do the following:
1. Right-click the icon for the hard disk drive (HDD) that you want to reorganize,
then select Properties from the pop-up menu.
2. Go to the Tools tab from disk Properties and select
Defragment Now.
3. Select the time and scheme to be used by the defragging program, then start
the defragmenting program. Depending on the amount of defragmentation on
the hard disk drive, this procedure can take a long time (sometimes more than
one hour).
4.6 Performing Daily Maintenance Tasks
Cleaning the computer components
Because many of the computer components consist of sophisticated integrated
circuit boards, it is very important to periodically clean in and around the computer
to prevent dust buildup. The cleaning supplies you need in order to clean the
components include: a vacuum cleaner, a soft cotton cloth, clean water (distilled
water preferred) and cotton swabs.
Attention: Before you clean your computer, disconnect the computer
from the electrical outlet. Clean your computer with a soft cloth
dampened with water. Do not use liquid or aerosol cleaners, which may
contain flammable substances.
31039306_Q700_UG_EN_V1.1.indd 31 2009.7.3 3:10:05 PM
Page 37
32
User Guide
Note: To avoid damaging the computer or display, do not spray cleaning
solution directly onto the display. Only use products specifically designed
for cleaning displays, and follow the instructions that are included with the
product.
The following are general methods for cleaning the components:
• You can use a soft cloth to remove dust on the surface of the computer, the
monitor, the printer, the speakers and the mouse.
• You can use a vacuum cleaner to clean in otherwise inaccessible corners.
• To clean the keyboard thoroughly, shut down the computer and scrub it gently
with a wet cloth.
• Do
not use the keyboard unless it is dry.
Do not do any of the following:
• Allow water to enter the computer
• Use a heavily dampened cloth
• Spray water directly onto the surface of the monitor or anywhere inside the
computer chassis.
Daily attention should be given to LCD monitors. Use a dry cloth daily to brush
dust from the monitor and keyboard. Keep all surfaces clean and free of grease.
31039306_Q700_UG_EN_V1.1.indd 32 2009.7.3 3:10:05 PM
Page 38
1
2
3
4
5
Chapter
Troubleshooting and Confirming
Setup
This chapter contains the following
topics:
ÿ
Troubleshooting and Problem Resolution
Note: The description of the TV-Tuner card
in this manual is relevant only to machines
which have a TV-Tuner card. It does not
apply to products that do not have a TVTuner card.
User Guide
33
31039306_Q700_UG_EN_V1.1.indd 33 2009.7.3 3:10:07 PM
Page 39
34
User Guide
Solving Problems
Follow these tips when you troubleshoot your computer:
• If you added or removed a part before the problem started, review the
installation procedures and ensure that the part is correctly installed.
• If a peripheral device does not work, ensure that the device is properly
connected.
• If an error message appears on the screen, write down the exact message.
This message may help support personnel diagnose and fix the problem(s).
• If an error message occurs in a program, view the program’s documentation.
Note: The procedures in this document were written for Windows in default
view mode, so they may not apply if you set your Lenovo® computer to
Windows Classic view.
5.1 Troubleshooting Display Problems
Problem: Blank screen or no image is displayed on the monitor
Troubleshooting and problem resolution:
1. Check that the monitor has been turned on; if not, press the Power button.
2. Check to see if the monitor power cable is loose; if so, securely plug the power
cable into the monitor.
3. Check that the signal cable to the monitor is securely connected to the
computer graphics card port; if not, shut down the computer then securely
connect the signal cable of the monitor.
Problem: You need to change the display property settings.
Setting display background and icon properties:
1. Right-click the desktop anywhere except over an icon, then select Personalize
from the pop-up menu.
2. From here, select the appropriate options to:
• Change the desktop background
• Select a screen saver
• Select colors and appearance options for icons and characters
• Set resolution and colors by using Display Settings options.
31039306_Q700_UG_EN_V1.1.indd 34 2009.7.3 3:10:07 PM
Page 40
35
User Guide
Problem: Ripple on screen
Troubleshooting and problem resolution:
1. Check for devices located less than one meter from the computer such as
refrigerators, electric fans, electric dryers, UPSs, regulators, fluorescent lamps
or other computers that may be generating magnetic interference.
2. Move any interfering devices away from the computer.
3. If the problem persists, consult Lenovo Service.
5.2 Troubleshooting Audio Problems
Problem: No sound from integrated speakers
Troubleshooting and problem resolution:
• Adjust the Windows volume control — double-click the speaker icon in the
lower-right corner of your screen. Ensure that the volume is turned up and
that the sound is not muted. Adjust the volume, bass, and treble controls to
eliminate distortion.
• Reinstall the audio driver
• Disconnect any headphones from the headphone socket — sound from the
speakers is automatically disabled when headphones are connected to the
computer’s side-panel headphone socket.
Problem: No sound from headphones
Troubleshooting and problem resolution:
• Check the headphone cable connection — ensure that the headphone cable is
securely inserted into the headphone socket.
• Adjust the Windows volume control — click or double-click the speaker icon in
the lower-right corner of your screen. Ensure that the volume is turned up and
that the sound is not muted.
5.3 Troubleshooting Software Problems
Problem: You are unable to exit a running program normally.
Troubleshooting and problem resolution:
1. Open the
Task Manager window by pressing Ctrl, Alt and Delete at the same
time.
2. Select the
Application tab, select the problematic program, and then click the
End Task button.
31039306_Q700_UG_EN_V1.1.indd 35 2009.7.3 3:10:07 PM
Page 41
36
User Guide
Problem: You need to install or uninstall a program.
Problem resolution:
During installation never abort the install process by powering the system off or
through other drastic means. This can cause system program disorder or even
failure during system initialization.
During the uninstall process, never directly delete individual files or folders. This
is harmful to the system, and might cause a system-wide malfunction.
Use the following procedure to properly uninstall programs:
1. Back up all documents and system settings related to the program before
removing it.
2. If the program has its own uninstaller, run it directly to uninstall the program.
3. If the program does not have its own uninstaller, then select
Control Panel from
Start menu.
4. From the
Control Panel, choose Programs and Functions.
5. Find the applicable program in the Programs and Functions dialog box and then
select Uninstall/Modify.
6. Follow the displayed instructions to uninstall the software.
5.4 Troubleshooting Problems with Optical Drives and
Hard Disks
Problem: The Optical drive is unable to read a CD/DVD.
Troubleshooting and problem resolution:
1. Check to determine if there is an optical drive icon in the resource manager
of the operating system. If not, restart your computer. If there is still no icon,
contact Lenovo Service. Otherwise, continue with the next step of this
procedure.
2. Confirm that the CD/DVD has been properly placed in the drive. If not, reload
the CD or DVD. Otherwise, continue with the next step of this procedure.
3. Check the specifications that came with your computer to confirm that your
optical drive should be able to read this type of CD or DVD.
4. If the CD/DVD cannot be read, replace it with a known good CD/DVD such as
one that was shipped with the computer.
5. If the known good CD/DVD cannot be read, visually inspect the data side of the
CD/DVD for defects.
31039306_Q700_UG_EN_V1.1.indd 36 2009.7.3 3:10:07 PM
Page 42
37
User Guide
Problem: The capacity of the hard disk, as indicated by the system, is less than
the nominal capacity.
Troubleshooting and problem resolution: For computers equipped with the
OneKey Recovery feature, the system recovery feature needs to occupy some
hard disk space. This may account for the apparent hard disk capacity deficit.
Further Technical Explanation: The nominal capacity of the hard disk is
expressed in the decimal system, 1000 bytes. But the actual hard disk capacity is
expressed in the binary system as 1024 bytes (For example, a nominal capacity of
1GB is 1000MB, while the actual capacity of 1GB is 1024MB).
The capacity of the hard disk shown in Windows can be worked out according to
the calculations in the following example:
The nominal capacity of the hard disk is 40GB, while its actual capacity
should be: 40 x 1000 x 1000 x1000/ (1024 x 1024 x 1024) = 37GB.
If the Service partition of 3GB - 3 x 1000 x 1000 x 1000/ (1024 x 1024
x1024) = 2.79GB is subtracted, the capacity of the hard disk shown in the
system can be obtained.
The capacity of the hard disk as calculated using this method may be slightly
different from the actual capacity due to the rounding of totals.
5.5 Special considerations for troubleshooting Windows
Record the following information that may be useful later when troubleshooting
system problems:
1. The serial number of the software. The serial number is shipped on the
computer and is also provided separately by the manufacturer. The Help Center
is unable to retrieve this number.
2. The drivers for this computer model only support the Windows Vista system.
3. When you use the Windows Media Center to watch TV, pay particular attention
to the following:
• In the following two situations, you must re-save the channel list:
a. When you change your TV signal from digital to analog, your saved
channel list for digital TV is deleted. When you want to watch digital TV
again, you must create and save a new channel list.
b. When you change your TV signal from analog to digital, your saved
channel list for analog TV is deleted. When you want to watch analog TV
again, you must create and save a new channel list.
31039306_Q700_UG_EN_V1.1.indd 37 2009.7.3 3:10:08 PM
Page 43
38
User Guide
• Before you can watch teletext programming, you must set the TV tuner input
signal to analog.
31039306_Q700_UG_EN_V1.1.indd 38 2009.7.3 3:10:08 PM
Loading...